10pcs 433Mhz 1CH Channel ON/OFF Wireless RF Remote Control Transmitter
Note: This remote can use for Product ID: 1040721; Output Working Way:; 1. Jog: Pressing one button is working. Loosing your finger on the same button is stop. (need one channel switch and one buttons remote control) 2. Self-lock: Pressing one button for one time is working. Pressing the same button again is stop (need one channel switch and one buttons remote control) 3. Inter-lock: Pressing one button is working. Pressing another button is stop (need one channel switch and 2 buttons remote control) 4. Please notice that here is 1CH and 1 button wireless remote control. You can choose the self-lock or jog working/ output way, you better choose jog or self-lock, so pressing the button is open, and pressing again is close, or pressing is open, and loosing finger is close; Learning and Remove Method:; 1. Press the learning code. The indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off. It mean you learn it successfully2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control3. Remove/ Clean: Press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully; Package includes:; 10 x Remote control; (Not includes the receiver)
5M Smart Light Strips WIFI Control Color Changing LED 5050 RGB Compatible with Amazon Alexa Sync to Music for
Specifications: Type: LED Light Material: Plastic Working Voltage: DC 12V LED Type: 5050 LED LED Quantity: 300pcs Color: RGB Working Temperature: -30c to 50c Beam Angle: 120 degrees Item Size: 5 0.8 cm Plug: UK Plug Package Size: 20.32 20.32 6.1 cm / 8 8 2.4 in Package Weight: 215g / 7.58 oz Package Includes: 1 x RGB LED Light Strip 1 x Wifi Controller 1 x 24 Key IR Remote Control (Battery Included) 1 x Power Adapter (UK Plug)
DC3.7V/5V/12V 315MHz Wide Voltage 2 Way Remote Control Switch For LED Light Bar Small Motor/Controller
Feature: Product model: AK-WK02CAProduct Name: Two micro controllerWorking voltage: 3.7V -12V (minimum 4V required for jog mode) Power consumption situation: Standby current is only 7MA, working is 30MA currentCoding method: learn code pairing, can learn fixed code and learning code chip remote controlWorking frequency: 315MHzWorking mode: Jog (default), self-locking, interlockingLoad size:
AduroSmart ERIA Home Monitoring Starter Kit Bundle (Hub Included)
The ERIA Home Monitoring Bundle has everything you need to secure your home. The Door and Window sensors give you security while you are away and send you instant smartphone notifications whenever a door or window opens or closes. And the ERIA Motion Sensor offers you energy efficiency at home while safely monitoring your property when you are away. Simply connect our motion sensor with the AduroSmart ERIA Hub and receive smartphone notifications whenever a presence is detected. * Monitor your home in your AduroSmart App from anywhere. * Receive notifications when a door opens or closes while you are away, * Monitor real time and past activity. * Smart technology switches your lights on and off when sensor is opened or closed. * View the battery status on your smartphone/tablet. * Long battery life (battery included). * Installation free, no screws required. * Compatible with the AduroSmart Hub * Compatible with other Zigbee platforms such as SmartThings and Wink
Wall Mount for TP-Link Deco M9 Plus Whole Home Mesh WiFi System Sturdy Bracket Holder Space Saving TP-Link
Specification: Type: Wall Mount Material: Plastic Color: White Version: US Plug Version/UK Plug Version (Optional) Quantity: 1 pack/ 2 pack/ 3 pack (Optional) Package Size: 1Pcs: 15014452mm 2Pcs: 15014452mm 3Pcs: 15014452mm Package Weight: 1Pcs: 101g 2Pcs: 155g 3Pcs: 217g
MagicConnect Smart Home Hub, Stand Alone Bridge, Works with All MagicConnect Brand Bluetooth Mesh Devices, Compatible with Amazon Alexa and Google Home
Add up to 64 MagicConnect Bluetooth mesh devices of your choice with this Bluetooth-mesh-controlled hub necessary for voice control with Alexa or Google Assistant Easily expand your lighting system with accessories (sold separately). It works with All MagicConnect Brand Bluetooth mesh devices including Bluetooth Mesh Color bulb, tunable white bulb, dimmable white bulb, panel light switch, power switch, outlet, PIR sensor switch, strip light and controllers The heart of your MagicConnect system. You can control all of your MagicConnect brand devices locally without it; but with the hub, you can enable voice control of Alexa or Google Home, even when you're away. Works for Both 110-220V. It will connect to your router wirelessly, and uses just 1.5 watts of energy to save your electricity. Includes 18 month warranty
3pcs 5V ESP8266 Dual WiFi Relay Module Internet Of Things Smart Home Mobile APP Remote Switch
Overview:; LC 5V ESP8266 2-channel WIFI relay module equip with to ESP-01 WIFI module and 8 bit high performance MCU, Only need simple configurations and then you can control the relay with cellphone APP under LAN area. Instruction: Click here to openMore details: Click here to openCharacteristics:; 1, On-board N76E003/STM8S003 and ESP-01 WIFI module2, Having two modes: (1) Mode 1: Cell phones carry on the wifi module directly (2) Mode 2: Cell phone and wifi module carry on the same routerAdditional function: As an USB relay module when unplug the ESP-013, Transmission distance: (1) In the open environment, the maximum transmission distance is 100m when the cell phone carry on the wifi module directly; (2) when the wifi module and cell phone carrying on the same router, the transmission distance depend on the router & rsquo; s signal intensity; 4, Use Smartconfig technology of ESP8266 to configurate the password for theESP-01 module with APP5, On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously, Module with diode effusion protection, short response time6, On-board model selection and working position indicator LED7, On-board preserved UART debug interface and MCU program interface8, Size: 59*40mmInterface and sources:; IN+, IN-: 5V power inputTX,; RX:; UART communicationSWIM,; NRST: MCU program interfaceS1: Mode selection key, default is mode 1S2: Restore keyLED D2 and D4 (red): Relay indicatorLED D7 (red): Mode 1 indicatorLED D5 (blue):; Mode 2 indicatorLED D6 (green): Working state indicator, the description of D6 as below: (1) It & rsquo; s means internal self-configuration or lost connection with the router when D6 off (2) It & rsquo; s means the ESP-01 are waiting for the APP configurate the password for it when D6 fast blink every 0.5S (3) It & rsquo; s means the whole configuration is done and waiting for establishing TCP connection with APP when D6 slow blink every 2S (4) It & rsquo; s means the TCP connection between ESP-01 and APP is OK when D6 on all the time. Relay control command (must be hex format): Open the first relay: A0 01 01 A2Close the first Relay:; A0 01 00 A1Open the second relay:; A0 02 01 A3Close the second Relay: A0 02 00 A2Package included: 3 x; 5V ESP8266 Dual WiFi Relay Module
Tuya Powered ZigBee PIR Motion Sensor Wireless Passive Infrared Detector Security Burglar Alarm Sensor
Package List: 1 PIR Motion Sensor
WIFI LED Strip Lights Kit 5m/16.4ft Length RGB Smart Light Strip Ewelink APP Remote Control Dimmable Changing
Specifications: Working Voltage: DC 12V Power: 4.8W /M Plug type: EU/US/UK /AU optional Item Name: WIFI LED Light Strips Light Bead Quantity: 54pcs Strip Length: 5m Color: RGB APP: Ewelink Remote Control Battery: button battery (not included) Main Material: Plastic Working Temperature: -30c to 50c Package Size: 17 17 6cm Package Weight: 326g Packing List: 1 LED Light Strip 1 Power Adapter 1 Remote Controller 1 Receiver
Google Home Mini Smart Home Assistant Small Speaker - Charcoal
Google Home Mini Smart Home Assistant Small Speaker - Charcoal condition: New Smart Assistant: Google Assistant Brand: Google Media Streaming: Home Network Media Audio/Video Outputs: Headphone Jack Color: Black Features: With Voice Control Media Input Connectivity: Bluetooth, Wi-Fi Manufacturer Color: Charcoal MPN: GA00216-US MPN: GA00216US Code: 9a3-683021000162769
10pcs ESP8285 Wireless WIFI Transceiver Module Infrared Transceiver Remote Control Switch Module Development Learning Board
Description:; It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart. The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home, which can be controlled remotely if connected to the Internet of things platform.; Features:; - Support Infrared control- Support wireless WIFI control- Support firmware update; Specifications:; Model: ESP_IR-TRWork Voltage: DC 5VWork Temperature: -25?~85?Work Humidity: 5%~95%RHSize: 23.4 * 23.4 *18mm; Update firmware:; 1. Connect IO0 and GND pins. 2. Connect module to PC by USB to UART converter. 3. Open software & #39; FLASH DOWNLOAD TOOLS V 3.6. 4 & #39;. 4. Set parameters. 5. Click START to download firmware. 6. Remove connect between IO0 and GND pins then update complete.; Package Included:; 10 x Infrared Transceiver ESP8285 Wireless WIFI Transceiver Module
15cm/5.9in Moon Night Light/ 3D Printed Moon Globe Lamp
Specifications: Name: 3D printing touch moon light Beam Angle: 360 Light Source: LED Control Mode: Touch Switch Type: tap the smart touch switch on bottom to change colors Color Temperature: 4000K Charging Mode: USB DC 2.5V Battery: 500mAh lithium battery(built-in) Input Voltage: 3.7V Charging Time: 3 hours Working Time: 8-10 hours (depends on brightness) Materials: PLA plastic Diameter of the Moon Light: 15cm/ 5.9 in Operation: 1. Touch the metal dot at the bottom of the moon lamp to turn on / off the light and change color from white to yellow. 2. Long press the metal dot to adjust the brightness. 3. If your hand is too dry or the temperature is too low, the light may not respond. 4. The white light will not shine when power is low. 5. Insert the DC connector into the DC 2.5 charge port at the bottom of the moon lamp to charge, the red light is always on during the charging. 6. The blue light will turn on when fully charged. Package Information: Package Size: Approx. 17.5 15.5 15.5 cm / 6.9 6.1 6.1 in Package Weight: Approx. 418g / 14.7 oz
315MHz AC220V Remote Control Switch Wall Transmitter Radio Frequency Power Switch Interrupter Remote Controller
nullFeatures: It is a panel 86 wall transmitter that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store. So that the trouble brought by routing is avoided successfully.;; Specification: Input Power: AC 85V-250VStandby Current: 97dbmTransmitting distance: 20-50m ( open space) Decoding mode: software decodingSupport remote type: Learning code 1527code, Fixed code (Rolling code can be design) Working mode: Momentary, Toggle, LatchingWiring type: Fixed terminal; Package included: 2 x; Remote Control Switch with Case 1 x; Remote Control
5pcs ESP8285 Wireless WIFI Transceiver Module Infrared Transceiver Remote Control Switch Module Development Learning Board
Description:; It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart. The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home, which can be controlled remotely if connected to the Internet of things platform.; Features:; - Support Infrared control- Support wireless WIFI control- Support firmware update; Specifications:; Model: ESP_IR-TRWork Voltage: DC 5VWork Temperature: -25?~85?Work Humidity: 5%~95%RHSize: 23.4 * 23.4 *18mm; Update firmware:; 1. Connect IO0 and GND pins. 2. Connect module to PC by USB to UART converter. 3. Open software & #39; FLASH DOWNLOAD TOOLS V 3.6. 4 & #39;. 4. Set parameters. 5. Click START to download firmware. 6. Remove connect between IO0 and GND pins then update complete.; Package Included:; 5 x Infrared Transceiver ESP8285 Wireless WIFI Transceiver Module
3pcs ESP8285 Wireless WIFI Transceiver Module Infrared Transceiver Remote Control Switch Module Development Learning Board
Description:; It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart. The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home, which can be controlled remotely if connected to the Internet of things platform.; Features:; - Support Infrared control- Support wireless WIFI control- Support firmware update; Specifications:; Model: ESP_IR-TRWork Voltage: DC 5VWork Temperature: -25?~85?Work Humidity: 5%~95%RHSize: 23.4 * 23.4 *18mm; Update firmware:; 1. Connect IO0 and GND pins. 2. Connect module to PC by USB to UART converter. 3. Open software & #39; FLASH DOWNLOAD TOOLS V 3.6. 4 & #39;. 4. Set parameters. 5. Click START to download firmware. 6. Remove connect between IO0 and GND pins then update complete.; Package Included:; 3 x Infrared Transceiver ESP8285 Wireless WIFI Transceiver Module
10pcs 433Mhz 1CH Channel ON/OFF Wireless RF Remote Control Transmitter
Note: This remote can use for Product ID: 1040721; Output Working Way:; 1. Jog: Pressing one button is working. Loosing your finger on the same button is stop. (need one channel switch and one buttons remote control) 2. Self-lock: Pressing one button for one time is working. Pressing the same button again is stop (need one channel switch and one buttons remote control) 3. Inter-lock: Pressing one button is working. Pressing another button is stop (need one channel switch and 2 buttons remote control) 4. Please notice that here is 1CH and 1 button wireless remote control. You can choose the self-lock or jog working/ output way, you better choose jog or self-lock, so pressing the button is open, and pressing again is close, or pressing is open, and loosing finger is close; Learning and Remove Method:; 1. Press the learning code. The indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off. It mean you learn it successfully2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control3. Remove/ Clean: Press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully; Package includes:; 10 x Remote control; (Not includes the receiver)
ZFX-W01 Carbon Crystal Plate Thermostat Socket Temperature Control Remote Control Switch Radiator Temperature Controller 2000W AC 220V
Features:; 1. Fire retardant material2. Automatic temperature adjustment3. There is power-off memory function4. Plug and play, no wiring required5. Digital screen display6. Each is equipped with a remote control; Specifications:; Rated voltage: AC220VRated power: 2000WColour: whiteMaterial: ABS Plug Type: US PlugTemperature setting range: 10-40 ?Self power consumption:
10pcs DC 12V 1CH Channel 433MHz Relay Wireless Remote Control Switch Transmitter
Features: 1. Suitable for all lights. 2. Energy-saving and environment protection3. Fast response and long control distance. 4. Stable performance and strong to resist interference, not obstructed by walls and furniture! 5. Easy to install and simple to use. 6. Application: Garage Door, Household Electrical Appliances, RGB lights7. Characteristic: Double control (wall switch function and control function), safety(the shell applies to the fire-retardant material), easy installation (just wire connection) Specifications: 1. Material: ABS Plastic2. Battery: 23A Battery (Battery is not included) 3. Operating voltage: 12V4. Frequency: 433MHZ5. Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)6. Current job: 9 ~ 12mA7. Transmitting power: 10-15mw8. Frequency deviation: & plusmn; 0.2MH z9. Size (LxWxH): 58x38x15 (mm); Package included: 10 x Wireless Remote Control (Battery is not included)
Smart WiFi Ceiling Light 48W Stepless Dimmable LED Lights Cloud Intelligence APP Remote Control Timing
Specifications: Input voltage: AC85-265V Wattage: 48W (24W: Cold white + 24W: Warm white) Color temperature: 2000K-7000K Dimmable: yes Light source: LED Light angle: 180 Lifespan of LED: 30, 000 hours WiFi: IEEE 802.11 b/g/n 2.4GH z APP: Cloud Intelligence Material: PMMA + Iron Chassis Color: White Lamp size: f406cm / f 15.72. 36in Package size: 404010cm / 15.7 15.7 3.9 in Package weight: 900g / 1.98 lb
30pcs KY-008 Laser Transmitter Module AVR PIC
Features: Operating voltage: 5VWavelength: 650 nmPCB size: 15 x 24 mmDepth: 8 mmWeight: 2.2 gWavelength: 650 nmPackage included: 30 x KY-008 Laser Transmitter Module
6V Multi-frequency Self-copy Remote Control 315mhz/433mhz/868mhz Learning Copy Remote Control Transmitter Green
Feature: Product model: AK-172ALL Product name: Multi-frequency four-button copy remote control Working voltage: 6V Encoding type: Copy Working frequency: multi-frequency 282-868MHz Modulation: ASK Number of keys: Four keys Transmission distance: 30M (under open environment) Product color: Blue, red, yellow, green (optional) Product size: 62 x 37 x 14mm Tips: & nbsp; The frequency range applicable to this remote control is from 280-868MHZ (the most commonly used frequency in the market). It can perform automatic frequency scanning. What frequency is copied and what frequency is transmitted. When copying, the coding and frequency can be done at one time without frequency modulation and matching.. Before purchasing, please make sure that the frequency of your remote control is within this range to ensure that the configured remote control can be used normally. & nbsp; Please note before buying: & nbsp; Need to know the frequency and chip model on the remote control & #39; s crystal. & nbsp; 1. You must have a good remote control. 2. You need to know the crystal frequency and chip model (As follows) of your remote control. Support copy chips: & nbsp; PT2242, PT2260, PT2262, EV1527, 527, PT2240, SMC918, HT-12E, AX5326-3, AX5326-4, AX5026, HT600, HT680, HT6207, HT6010, HT6012, HT6014, MC145026, HT640, SMC926, HT12, etc. code and learning code wireless remote control. How to copy: STEP 1: Clear Code: & nbsp; Press & nbsp; Up two keys & nbsp; at the same time, the LED indicator flashes three times, release any one of the keys (hold on the & nbsp; the other one), and press the hold-on button three times, the LED indicator enters a fast flashing state, indicating that the code is cleared ( When cleared remote control, short press, the LED indicator is off. ) & nbsp; STEP 2: & nbsp; Copy Code: & nbsp; One hand is holding your remote control, the other is holding the new remote control, the two remote controls are close to each other, press the required copy button respectively, the LED indicator flashes three times after flashing, it means the copy is successful, the other keys operation method is the same. Note: If the function is abnormal after copying, please clear the code and copy again. (Special suggestion: update your remote control with new battery before copying) & nbsp; Restore: & nbsp; When you accidentally clear the code of the self-copying remote control, you can press the Down two keys at the same time. After 3S, the LED light will flash 3 times, and then it will flash quickly, which indicates that the code of the self-copying remote control is restored.. Package includes: 1 x Remote control & nbsp;
AC 220V 10A Control Smart Switch Point Remote Relay 4 Channel WiFi Module Without Shell
Features:; -Control Lights, TV, Motors, Fans, Cameras, Video Signals, Audio Signals, Electric Doors/Locks/Windows/Curtains/Cars or Other Appliances. -The volume is small and the performance is stable and reliable, high receive sensitivity. -With the functions of controlling household appliances remotely, setting time on phone, delaying switch, etc.; Specification:; Input: AC 90V-250V ( 50/60Hz)Output: AC220VMax Current: 10AMax Power: 3500WMobile phone system: ISO or AndroidAPP: eWELinkWIFI: IEEE 802.11 b/g/nWireless Frequency: 2.4G hzMaterial: PCB sheetHumidity: 5%-95%Working Temperature: -20?~75?Max soldering temperature: 260?Color: As pictures show; Usage:; The flicker characteristic of WiFi state lamp is in 2 seconds, the low level lamp is high and the high level lamp is out.; Detailed explanation of each state: A. Normal: device is working properly, and the connection with the cloud server is normal. APP can be manipulated at this time. In any other mode, the device can & #39; t be controlled by APP. B. No Wifi: device cannot connect to wireless router. C. No Server: The device is connected to a wireless router, but cannot be connected to the server (that is, the commonly understood "can not access the Internet "). D. Unregistered: indicates that the device has not been bound to any account. In general, devices need to be bound with eWeLink CoolKit accounts to communicate with cloud servers. The "add device" in Yi micro APP can complete the binding operation. E. Upgrade: indicates that the device is upgrading firmware. F. Setting G1: indicates that the device is in AP mode. Configuration mode is for devices to obtain necessary information for mobile terminal APP to join the service network, including router ssid, password, server ip, port number, etc. G. Setting G2: indicates that the device is in ESPTOUCH mode. Configuration mode is for devices to obtain necessary information for mobile terminal APP to join the service network, including router ssid, password, server ip, port number, etc.; Package Included:; 1 x WiFi Smart Switch Module Without Shell;
Geekcreit 2 Channel AC 85V-250V APP Remote Control WIFI Wireless Switch Socket For Smart Home
Description: You can APP remote your electrical equipment via this product; And please weld a 433MHz receiver board if you want to support 433MHz remote control; How to weld the 433MHz reverive board and other details please refer to following link; Click to know more informationPackage included: 1 x Wireless Switch
3pcs 5V ESP8266 Dual WiFi Relay Module Internet Of Things Smart Home Mobile APP Remote Switch
Overview:; LC 5V ESP8266 2-channel WIFI relay module equip with to ESP-01 WIFI module and 8 bit high performance MCU, Only need simple configurations and then you can control the relay with cellphone APP under LAN area. Instruction: Click here to openMore details: Click here to openCharacteristics:; 1, On-board N76E003/STM8S003 and ESP-01 WIFI module2, Having two modes: (1) Mode 1: Cell phones carry on the wifi module directly (2) Mode 2: Cell phone and wifi module carry on the same routerAdditional function: As an USB relay module when unplug the ESP-013, Transmission distance: (1) In the open environment, the maximum transmission distance is 100m when the cell phone carry on the wifi module directly; (2) when the wifi module and cell phone carrying on the same router, the transmission distance depend on the router & rsquo; s signal intensity; 4, Use Smartconfig technology of ESP8266 to configurate the password for theESP-01 module with APP5, On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously, Module with diode effusion protection, short response time6, On-board model selection and working position indicator LED7, On-board preserved UART debug interface and MCU program interface8, Size: 59*40mmInterface and sources:; IN+, IN-: 5V power inputTX,; RX:; UART communicationSWIM,; NRST: MCU program interfaceS1: Mode selection key, default is mode 1S2: Restore keyLED D2 and D4 (red): Relay indicatorLED D7 (red): Mode 1 indicatorLED D5 (blue):; Mode 2 indicatorLED D6 (green): Working state indicator, the description of D6 as below: (1) It & rsquo; s means internal self-configuration or lost connection with the router when D6 off (2) It & rsquo; s means the ESP-01 are waiting for the APP configurate the password for it when D6 fast blink every 0.5S (3) It & rsquo; s means the whole configuration is done and waiting for establishing TCP connection with APP when D6 slow blink every 2S (4) It & rsquo; s means the TCP connection between ESP-01 and APP is OK when D6 on all the time. Relay control command (must be hex format): Open the first relay: A0 01 01 A2Close the first Relay:; A0 01 00 A1Open the second relay:; A0 02 01 A3Close the second Relay: A0 02 00 A2Package included: 3 x; 5V ESP8266 Dual WiFi Relay Module
5pcs ESP8285 Wireless WIFI Transceiver Module Infrared Transceiver Remote Control Switch Module Development Learning Board
Description:; It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart. The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home, which can be controlled remotely if connected to the Internet of things platform.; Features:; - Support Infrared control- Support wireless WIFI control- Support firmware update; Specifications:; Model: ESP_IR-TRWork Voltage: DC 5VWork Temperature: -25?~85?Work Humidity: 5%~95%RHSize: 23.4 * 23.4 *18mm; Update firmware:; 1. Connect IO0 and GND pins. 2. Connect module to PC by USB to UART converter. 3. Open software & #39; FLASH DOWNLOAD TOOLS V 3.6. 4 & #39;. 4. Set parameters. 5. Click START to download firmware. 6. Remove connect between IO0 and GND pins then update complete.; Package Included:; 5 x Infrared Transceiver ESP8285 Wireless WIFI Transceiver Module
Modern COB LED Waterproof Wall Lamp Warm white light 12W
Specifications: Color: black, white (optional) Light color: warm white, white (optional) Power: 7W, 12W (optional) Material: aluminum alloy Light source: COB Item size: 100 100 100mm / 3.9 3.9 3.9 in Item weight: 670g / 1.5 lb Package size: 110 110 110mm / 4.3 4.3 4.3 in Package weight: 750g / 1.7 lb
BedJet 3 Dual Zone Climate Comfort System for Couples - Queen Size
Some like it hot. Some need it cool. Some want to stop night sweats and others need different sleep temperatures than their partners. That's why everyone loves the new BedJet 3! Using advanced technology the BedJet sends a gentle and quiet stream of air directly into your bed for powerful cooling and warming comfort. Our Dual Zone bundle provides independent cooling and warming to each half of the bed with two BedJet machines, two color screen remote controls, and our Dual Zone Cloud Sheet. Stop fighting over the thermostat with your partner and start sleeping better together!
Tuya Wifi Intelligent Siren Sound Alarm Temperature Humidity Sensor APP Control Wireless Secure System WiFi USB Voice Control
Features: APP sets the temperature and humidity alarm range in advance, detects changes in ambient temperature and humidity, exceeds the safety interval, and automatically alarms even in the absence of a network. When the siren alarm triggered, it will make alarm with both 100dB voice prompts and quick flash strobe. 18 alarm sound ringtones optional, with colorful life. Don & #39; t need home gateway, you can easily achieve the intelligent control of home appliances, simple operation, easy to use. Powered by the included USB cable or back-up battery (not included). Helps keep your home Secure even if the electricity fails. It can linkage with other smarthome products, such as PIR sensors or door sensors, etc. No matter how far away from home, the warmth of home is in hands. Making your home smarter. Compatible with Amazon Alexa and for Google Home IFTTT for voice control. Specifications: Material: ABS Color: White Wireless Range: 45m Sound intensity: 100 dB Power supply: Mini USB, 5V-1A Wireless Type: 2.4GH, 1T1R Operating temperature: 0?~ 40? (32F~104F) Operating humidity: 20%~85% Storage temperature: 0?~ 60? (32F~140F) Storage humidity: 0%~90% Package size: 10 * 10 * 6cm / 3.9 * 3.9 * 2.4 in Package weight: 115g / 4.1 oz Package List: 1 * Siren Alarm (Battery Not Included) 1 * USB Cable
Monoprice Wireless Smart Home Starter Kit - 5 Pieces, No Hub Required, Easy Set Up & Install - From STITCH Smart Home Collection
The STITCH by Monoprice Wireless Smart Home Starter Kit (5-piece bundle) includes all the essential components to build a smarter home, hassle-free. The kit contains a Smart LED Dimmable Light Bulb, Smart Plug with Energy Monitoring, and three safety sensors (Door/Window Sensor, Motion & Vibration Sensor, and Water Sensor), all of which are compatible with Android and iOS smartphones and tablets. No hub or gateway required!
SONOFF MINI DIY Two Way Smart Switch Small Body Remote Control WiFi Switch Support An External Switch Work With Google Home/Nest IFTTT & Alexa
Overview: This is a mini and compact DIY smart switch used for different kinds of switch boxes, even the smallest EU standard switch box. Convenient to automate your home appliances with eWeLink app through your smartphone or tablet or your voice command. Support to connect an external rocker light switch unable to automatically spring back for easily managing connected devices in your home, both on your phone or directly from the wall. It supports the DIY mode (designed for developers) which allows users to integrate MINI into worldwide third-party open source smart home control system to achieve LAN control without cloud service, such as Home Assistant, openHAB, ioBroker, etc. Features: *Control your home appliances with the app. *Ask devices to turn on/off just by a voice command. *Set a time for devices to make it start or stop running automatically. *Allow developers to flash the firmware to access more features they want. *Support the rocker light switch to control devices (self-return switch not included). *Create smart scenes to trigger groups of SONOFF devices on/off via tapping on your phone. *Make an action to trigger another or receive a message alert to your phone. *Share the device with your family to control it together. *Check the device status change on your phone in real time. *Run the device on your phone albeit no normal WiFi connection. *Keep the device in the status before power failure when the electricity system is restored. Note: 1. The antenna has strong electricity inside, do not break the wire jacket. 2. To make sure the stable RF signal, please keep the wire away from the metal component in the switch box when wiring. Specifications: Brand Name: SONOFF Input: AC 100-240V 50/60Hz 10A Max Output: AC 100-240V 50/60Hz 10A Max WiFi: IEEE 802.11 b/g/n 2.4GH z Material: PC V0 Size: 42.6 * 42.6 *20mm Package List: Smart Switch (1/2//4/10PCS Optional)
Android Mini TV Stick Dongle / Quad core Mini PC 2G/8G HD DLNA H.265 WiFi
Specifications: Model No.: Quad Core TV Stick Model: Quad Core Mini Android TV Stick/ mini pc CPU: Rockchip RK3229, Cortex A7 Quad core, GPU: Mali 400 MP4 Operation System: Android 7.1 RAM: 2GB ROM: 8GB Shell Material: Plastic Display: No Color: Black & Orange Card Extended: Support TF card up to 32GB External Antenna: Dual External WIFI Antenna, Stronger wifi signal Networking: WiFi 802.11 b/g/n 10/100Mbps Play Store: Yes Flash Player: Yes, support Adobe Flash 11 Gaming: Built-in 3D Accelerator. Support 3D gaming Email: Gmail, POP3/SMTP/IMAP4 Video: Video Decoding: Mpeg1/2/4. H. 264, VC-1, Divx, Xvid, RM8/9/10, VP6; Video Formats: MKV, TS, TP, M2TS, RM/RMVB, BD-ISO, AVI, MPG, VOB, DAT, ASF, TRP, FLV etc full formats Audio: Audio Decoding: DTS, AC3, LPCM, FLAC, HE-AAC; Audio Formats: MP3, OGG, WMA, WMAPRO Picture: JPEG, PNG, BMP, GIF E-Book: PDF, TXT etc Power: Yes, it needs power supply(DC5V, 2A) Ports: 1 x Male HDMI 1 x USB 2.0 Host 2 X Micro USB Host 1 x TF/Micro SD Card Slot 1 x Fn button Dimensions: 101 x 44 x 10mm Net Weight: 40g Accessories: 1 x Quad Core Android TV Stick 1 x USB Cable 1 x Charger (Sends a corresponding plug according to the recipient address) 1 x HDMI Cable 1 x User Manual
Lenovo 10" Smart Display with the Google Assistant (White front and Bamboo back)
Make life easier and simpler with the Google Assistant paired with Lenovo’s vivid screen. Just say “Hey Google” to get started. Your Assistant will show you today’s weather, switch on the lights, and play your favorite music. When you need the whole picture, Smart Display pulls up images, maps and video to complement Google Assistant’s answers. Stylish and easy to use, it’s there to help, inform, or entertain. Any time. If looks could dial Lenovo Smart Display is more than just eye-catching. It can also make and receive video calls through Google Duo—an easy-to use app available on Android and iOS. Just say the name and it will do the calling for you. The answer to feeling less busy Make a to-do list, add events to your agenda, and display your Google Photos—without lifting a finger. From getting out the door in the morning to relaxing in the evening, the Google Assistant on your Lenovo Smart Display can help to save time and simplify things for you. Eye-catching, whichever way you look at it With its clean, minimalist design, Lenovo Smart Display blends seamlessly into any room. Its flexible kickstand lets you flip the stunning 10” FHD screen vertically or horizontally when making video calls, for a view that best suits you. The stress-free, smarter way to run your home Use your Lenovo Smart Display to control your connected smart home devices—from keeping tabs on the baby, dimming the lights, or adjusting the thermostat. You can also cast your entertainment onto Chromecast built-in devices, so you can watch videos from any room. A good listener—and fine speaker Hear your latest playlist, watch your favorite chefs, or video call your loved ones—simply by asking. With dual-array microphones and a 10 W full-range speaker, Lenovo Smart Display can respond to you from across the room. From asking to multitasking Find the quickest route, check your schedule, or listen to the news—all without touching a thing. How? With the Google Assistant built in. It’s your own personal Google, always ready to help. So you can ask for the information you need, even when your hands are full.
Intelligent WiFi SmartPlug Voice Control Wireless Time Switch With Ports Timing Socket Home Remote for IFTTT
Specifications: Qty: 1pcs, 2pcs, 4pcs (optional) Current: 16A Voltage: AC 100-240V 50/60HZ Working frequency: 50Hz-60Hz Material: PC + ABS Working standard: ETL FCC ROSH Wi-Fi Standard: IEEE 802.11 b/g/n 2.4GH Support system: for Andriod 4.2 and above, for IOS 8.0 and above Item weight (1pcs): 80g / 2.8 ounce Item size: 73 44 52.5 mm / 2.9 1.7 2.1 in Package size: 77.5 55 50mm / 3.1 2.2 2.0 in Package weight: 1pcs: 140g / 4.9 ounce 2pcs: 200g / 7.1 ounce 4pcs: 360g / 12.7 ounce Package Included: 4 x Timing Socket
Quirky PPVPG-WH01 Pivot Power Genius Smart Flexible Power Strip
Quirky PPVPG-WH01 Pivot Power Genius Smart Flexible Power Strip
10pcs DC 12V 1CH Channel 433MHz Relay Wireless Remote Control Switch Transmitter
Features: 1. Suitable for all lights. 2. Energy-saving and environment protection3. Fast response and long control distance. 4. Stable performance and strong to resist interference, not obstructed by walls and furniture! 5. Easy to install and simple to use. 6. Application: Garage Door, Household Electrical Appliances, RGB lights7. Characteristic: Double control (wall switch function and control function), safety(the shell applies to the fire-retardant material), easy installation (just wire connection) Specifications: 1. Material: ABS Plastic2. Battery: 23A Battery (Battery is not included) 3. Operating voltage: 12V4. Frequency: 433MHZ5. Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)6. Current job: 9 ~ 12mA7. Transmitting power: 10-15mw8. Frequency deviation: & plusmn; 0.2MH z9. Size (LxWxH): 58x38x15 (mm); Package included: 10 x Wireless Remote Control (Battery is not included)
Asante 99-00900-US Remote Viewing and Controlling by App Garage Door Opener with Camera Kit
GARAGE DOOR OPENER WITH CAM KIT VIEW CTLR GARAGE DOOR F/SMARTPHONE
LED Strip Lights Kit 5m/16.4ft Length 5050 RGB Remote Control Changing Color Waterproof 12V Power Supply Smart
Specifications: Item Name: LED Light Strips Strip Length: 5m Main Material: Plastic Color: RGB Light Bead Type: 5050 LED Single Bead Power: 0.5W Working Voltage: DC 12V Working Temperature: -30c to 50c Package Information: Package Size: 1716.56. 5cm Package Weight: 483g Packing List: 1 LED Light Strip 1 Power Adapter 1 Remote Controller 1 Receiver
Geekcreit 2 Channel AC 85V-250V APP Remote Control WIFI Wireless Switch Socket For Smart Home
Description: You can APP remote your electrical equipment via this product; And please weld a 433MHz receiver board if you want to support 433MHz remote control; How to weld the 433MHz reverive board and other details please refer to following link; Click to know more informationPackage included: 1 x Wireless Switch
5.9" Colorful RGB 3D Printed Mushroom Night Light
Specifications: Diameter: 15cm/ 5.9 in; 20cm/ 7.9 in Optional Power supply: USB DC 2.5 charging Voltage: 3.7V Wattage: 1.85W Battery capacity: 1 500mAh 902030 polymer lithium battery (included) Brightness: stepless adjustment Lamp Bead Model: 5050RGB Mixed Color SMD Light Number of Lamp Beads: 3pcs Charging time: 1-3 hours Working time: 6-10 hours (depends on brightness) Color temperature: 4000K Remote Control Battery: 1CR2025 (included) Cover Color: White Material: PLA Item Size: Approx. 14 14 15cm (LWH) Item Weight: Approx. 200g / 7.1 oz Package Information: Package Size: Approx. 17.2 15.6 15.6 cm / 6.8 6.1 6.1 in Package Weight: Approx. 340g / 12oz
4CH 200M Wireless Remote Control Relay Switch Receiver + 2 Transceiver 4 Channel 12V DC for Smart Home
Output Working Way:; 1. Self-lock: connect the JP1 with the cutting out cap. 2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either. 3. Inter-lock: Connect the Jp2 with the Cutting out cap, Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control). Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control). Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).; Receiver:; Operating voltage: DC 12VOperating current: 7mAFrequency: 433mhzQuiescent condition: 6mAreceiver sensitivity: more than -105dBmOutput voltage: AC and DC is optionalOutput current: 3ASize: 72mm (L) x 52mm (W) x 26mm (H); Remote Control Transmitter:; Remote distance: 50-100mOperating voltage: DC 12VOperating current: 13mAFrequency: 433mhzCode type: Fixed code / Learning codeSize: 55mm (L) x 30mm (W) x 10mm (H); Features:; - Easy installation and use- Stable and reliable, high receive sensitivityBe designed to control a wide variety of electronic devices with a - wireless signal; Fitment:; It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.; Package Included:; 1 x Receiver2 x Transmitter; Note:; 1. Please check as much as possible to make sure the item is the one that you need, for we provide clear pictures and measurements. 2. Please allow 0.5 -1 inch difference due to manual measurement. 3. Instruction is NOT included. Professional installation is highly recommended.
30pcs KY-008 Laser Transmitter Module AVR PIC
Features: Operating voltage: 5VWavelength: 650 nmPCB size: 15 x 24 mmDepth: 8 mmWeight: 2.2 gWavelength: 650 nmPackage included: 30 x KY-008 Laser Transmitter Module
?Upgraded?KControl Smart Switch 32 Channel Ethernet Relay Module DC 12V Network IP Web Relay Controller Home Automation DIY for Remote Control Garage Door Appliance Gate Office PC with iOS Android APP
PLEASE NOTE:
The App supports mobile phone (iOS/Android), but the PC software only supports Windows PC, Does not support Mac. It's not zigbee compatible. Not dimmable option. Just ON & OFF.
Use pluggable terminals, easy to install and maintain. It is DIN Rail Mounted, can be installed in the distribution box, great for home or industrial control.
The control of timing mode, scenario mode and trigger linkage mode can be used by iOS/Android APP. You can check your devices status anywhere and anytime.
Remotely turn on or off the connected devices. Share the devices to your family or friends to control remotely.
It can be used to remote monitoring Baby/Old people/Pet. It can be as an accessory of Smart Sprinkler Controller (for Auto Spraying Garden Park Lawn Flower, Indoor Plant Timer Watering, Aquarium Water Auto Refill) or Smart Irrigation Controller for farmland drainage and supplemental irrigation.
Product Parameter:
Product model: KC868-H32L
Material:Fire resistance ABS, Metal shell
Working Temp: -4F~158F ( -20?~70?)
Working Humidity: 20% RH ~ 80% RH
External power supply interface: DC12V
Output Load: Each 250V/10A
Input port qty: 6 ports
Output port qty: 32 ports
Network Control Mode: WAN or LAN or RS232
Relay Remember: Power ON Auto recovery
Supporting Programmable: CS & BS
Power Failure Remember: Auto Relay ON/OFF
Output Terminal: Pluggable
Demo Source Code: KinCony's Github
Product Dimension: 10.71 x 4.61 x 1.57 inch
Product Function:
1. Remote ON/OFF – Turn electrical devices ON/OFF from anywhere.
2. APP/PC Support – Free iOS & Android mobile App and PC software.
3. Independent control - Control each gang separately.
4. Sync Status – Real-time device status provided to App.
5. Share Control – Share your account with your family to control your smart home.
6. Timing – Set scheduled to turn ON/OFF at specified regular time.
7. Scene – Turn ON/OFF some specific switch of devices with one tap.
8. Smart Scene – Can be triggered ON/OFF by kinds of sensor (Need support by sensor).
9. Support secondary development for programmer.
10. Three Control methods: Mobile phone APP remote control, PC local or remote control.
Product Features:
1. Using ARM processor, industrial stability and good anti-jamming.
2. Support LAN and Internet, It can also be used without internet.
3. Support multilingual customization.
4. Each device name/ icon supports self-modification.
5. Software Title Name Information supports self-modification.
6. For Engineer: Provide the controller's communication protocol, which can be redeveloped.
4PCS Solar Power LED Waterproof Spotlight
Specifications: Power Consumption: 0.07W Solar Panel: 5.5V 120mA Batteries: 1 3.7V 1200mAh 18650 (included) Solar Energy Charging: 400mA/5H Electric Energy Consumption: 90mA/5H Charging Time: 12~15h (Depend on illumination intensity) Working Time: Lasting about 60 hours ( Fully charged ) LED quantity: 8pcs LEDS Light Color: Warm White Color Temp: 6000K-6500K Lighting Mode: Always Bright / Flicker Waterproof level: IP65 Material: ABS Item Quantity: 4pcs Item Size/per: 11.311. 313.8 cm Item Weight/per: 140g/ 15.94 oz Package Information: Package Size: Approx. 161212cm/ 6.294. 724.72 in Package Weight: Approx. 630g/ 22.2 oz
1pc SMATRUL White 433Mhz RF Remote Controller
Controller specification:; 1, working voltage: AC85-240V 60HZ/50HZ2, working frequency: 433.92MHZ 3, the total load power:
30pcs KY-008 Laser Transmitter Module AVR PIC
Features: Operating voltage: 5VWavelength: 650 nmPCB size: 15 x 24 mmDepth: 8 mmWeight: 2.2 gWavelength: 650 nmPackage included: 30 x KY-008 Laser Transmitter Module
Wifi Smart Wall Touch Switch 3 Gang Glass Panel Mobile APP Tuya/Touch Control Timer No Hub Required Compatible
Specifications: Power Supply: 100V-240V AC Max. Current: 10A Rated Power: 600W/gang, 1800W (Max) Gang: 3 Wireless Frequency: WiFi 2.4GH z Wireless Standard: IEEE 802.11 b/g/n APP: SmartLife/Tuya Material: ABS V0+ Toughened Glass Panel Product Size (DWH): 888837mm Product Weight: Approx. 145g Package Information: Package Size: Approach. 13.810. 25.5 cm / 5.442. 2in Package Weight: Approach. 207g/ 7.3 oz
10pcs WL102 433MHz Wireless Remote Control Transmitter Module ASK/OOK for Smart Home
Features:; The WL102 transmitter module is a UHF ASK modulation transmitter that supports ASK and OOK modulation. The transmitting module integrates a PLL circuit and an ASK analog modulation circuit, and has a high degree of integration and the like, and can be applied to short-range wireless communication. The transmission frequency is greater than 11dBm.; - Support ASK / OOK modulation, transmission frequency over 11dBm- Low power consumption, quiescent current less than 1uA- Transmission rate up to 20Kbps; Specifications:; Input voltage: 2.0 - 3.6V DCWorking frequency: 433MHzQuiescent current: 20KbpsTemperature range: -45 -85 °C; Application Range:; Remote control switch, receiving module, motorcycle, car anti-theft product, home security product, electric door, rolling door, window, remote control socket, remote control LED, remote control audio remote control electric door, garage door remote control, remote control telescopic remote control door, remote control roll door, sliding door, remote control door opener, door closer control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric car, remote control MP3, etc.; Package Included:; 10 x WL102 Transmitter Module
DC3.7V/5V/12V 315MHz Wide Voltage 2 Way Remote Control Switch Miniature Universal Learning Code Support for Light Strips Motor
Feature: Product model: AK-WK02CAProduct Name: Two micro controllerWorking voltage: 3.7V -12V (minimum 4V required for jog mode) Power consumption situation: Standby current is only 7MA, working is 30MA currentCoding method: learn code pairing, can learn fixed code and learning code chip remote controlWorking frequency: 315MHzWorking mode: Jog (default), self-locking, interlockingLoad size:
AC 220V 10A Control Smart Switch Point Remote Relay 4 Channel WiFi Module Without Shell
Features:; -Control Lights, TV, Motors, Fans, Cameras, Video Signals, Audio Signals, Electric Doors/Locks/Windows/Curtains/Cars or Other Appliances. -The volume is small and the performance is stable and reliable, high receive sensitivity. -With the functions of controlling household appliances remotely, setting time on phone, delaying switch, etc.; Specification:; Input: AC 90V-250V ( 50/60Hz)Output: AC220VMax Current: 10AMax Power: 3500WMobile phone system: ISO or AndroidAPP: eWELinkWIFI: IEEE 802.11 b/g/nWireless Frequency: 2.4G hzMaterial: PCB sheetHumidity: 5%-95%Working Temperature: -20?~75?Max soldering temperature: 260?Color: As pictures show; Usage:; The flicker characteristic of WiFi state lamp is in 2 seconds, the low level lamp is high and the high level lamp is out.; Detailed explanation of each state: A. Normal: device is working properly, and the connection with the cloud server is normal. APP can be manipulated at this time. In any other mode, the device can & #39; t be controlled by APP. B. No Wifi: device cannot connect to wireless router. C. No Server: The device is connected to a wireless router, but cannot be connected to the server (that is, the commonly understood "can not access the Internet "). D. Unregistered: indicates that the device has not been bound to any account. In general, devices need to be bound with eWeLink CoolKit accounts to communicate with cloud servers. The "add device" in Yi micro APP can complete the binding operation. E. Upgrade: indicates that the device is upgrading firmware. F. Setting G1: indicates that the device is in AP mode. Configuration mode is for devices to obtain necessary information for mobile terminal APP to join the service network, including router ssid, password, server ip, port number, etc. G. Setting G2: indicates that the device is in ESPTOUCH mode. Configuration mode is for devices to obtain necessary information for mobile terminal APP to join the service network, including router ssid, password, server ip, port number, etc.; Package Included:; 1 x WiFi Smart Switch Module Without Shell;
5pcs ESP8285 Wireless WIFI Transceiver Module Infrared Transceiver Remote Control Switch Module Development Learning Board
Description:; It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart. The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home, which can be controlled remotely if connected to the Internet of things platform.; Features:; - Support Infrared control- Support wireless WIFI control- Support firmware update; Specifications:; Model: ESP_IR-TRWork Voltage: DC 5VWork Temperature: -25?~85?Work Humidity: 5%~95%RHSize: 23.4 * 23.4 *18mm; Update firmware:; 1. Connect IO0 and GND pins. 2. Connect module to PC by USB to UART converter. 3. Open software & #39; FLASH DOWNLOAD TOOLS V 3.6. 4 & #39;. 4. Set parameters. 5. Click START to download firmware. 6. Remove connect between IO0 and GND pins then update complete.; Package Included:; 5 x Infrared Transceiver ESP8285 Wireless WIFI Transceiver Module
3pcs 2-in-1 12V RS232 TTL232 Relay UART Serial Remote Control Switch For Control Garage Car Motor
>>>Instructions: Click here to open
WIFI Smart Remote Motor Controller for Automatic Electric Curtain APP Control
MESMART, the professional designer and producer for home automation system and all the related smart items. Aims to create a more comfortable and convenient life for people all over the world. “Control Everything in Your Hand”, that’s the eternal theme of MESMART R & D team, and will keep struggling to make it come true. WIFI Version: The smart module connects the electric curtain motor via RJI2 connector. With MESMART APP, the LED strip can be remotely control to open/close, create open/close schedule, and check status any time Features: Brand: MESMART Only support 2.4GH z WiFi Signal Color: White Connect with normal RJI2 Motor, and make it become smart Note: Only support RJI2 connector of motor
Smart Power Technology Co., Ltd
LED Strip Lights Kit 2m/6.7ft Length 5050 RGB Remote Control Changing Color Waterproof 12V Power Supply Smart
Specifications: Item Name: LED Light Strips Strip Length: 2m Main Material: Plastic Color: RGB Light Bead Type: 5050 LED Single Bead Power: 0.5W Working Voltage: DC 12V Working Temperature: -30c to 50c Package Information: Package Size: 1716.56. 5cm Package Weight: 363g Packing List: 1 LED Light Strip 1 Power Adapter 1 Remote Controller 1 Receiver
Wifi Smart Wall Touch Switch 1 Gang Glass Panel Mobile APP Tuya/Touch Control Timer No Hub Required Compatible
Specifications: Power Supply: 100V-240V AC Max. Current: 10A Rated Power: 600W/gang, 1800W (Max) Gang: 1 Wireless Frequency: WiFi 2.4GH z Wireless Standard: IEEE 802.11 b/g/n APP: SmartLife/Tuya Material: ABS V0+ Toughened Glass Panel Product Size (DWH): 888837mm Product Weight: Approx. 145g Package Information: Package Size: Approach. 13.810. 25.5 cm / 5.442. 2in Package Weight: Approach. 207g/ 7.3 oz
Powered Facial Cleansing Brush Sonic Exfoliating Silicone Scrubber IPX6 Waterproof 500mAh Type-C Rechargeable
Specifications: Model: PC1124 Material: ABS / Silicone Color: Blue / Pink / Orange (optional) Water-Resistant Level: IPX6 Power: 5W Battery Capacity: 500mAh Interface: USB Type-C Charging Time: about 150min Item Size: 8.16. 53.4 cm / 3.182. 551.33 in Item Weight: 85g / 2.99 oz Package Size: 1510.55. 2cm / 5.94. 132.04 in Package Weight: 280g / 9.87 oz Packing List: 1 Facial Cleansing Brush 1 Charging Cable 1 User Manual
Google Nest Audio Smart Speaker - Sand
Google Nest Audio Smart Speaker - Sand
Meet Nest Audio. Hear music the way it should sound, with crisp Vocals and powerful bass that fill the room. Just say, Hey Google” to play music or get help.
Designed to protect your privacy.
Nest Audio comes with privacy built in. You can delete your Assistant history by saying, Hey Google, delete what I just said.” Or to turn off the mic, just use the switch on the back.
It's all about sound.
Just say, "Hey Google, play some music," and crisp vocals and powerful bass fill the room. Nest Audio adapts to your environment and whatever you're listening to, so music sounds better.
Music here. Music there. Music everywhere.
Create a home audio system that fills your home with sound.* Nest Audio works together with your other Nest speakers and displays, Chromecast-enabled devices, or compatible speakers. And it's easy to set up.
Connect with family and friends.
Nest Audio helps you stay in touch. Just say, Hey Google” to broadcast messages on every Nest speaker and display in the house. Use your Nest speakers as an intercom and chat from room to room. And make audio calls with Duo.***
Huge help around the house.
You can say things like, "Hey Google, what's the weather this weekend?" Ask Google about the news or sports scores. Hear your schedule.** Make calls.*** And set timers and alarms. Even turn on the lights or turn up the heat.**** All with your voice.
Thoughtfully designed. Environmentally sound.
Inspired by your home, Nest Audio's colors, size, and shape fit beautifully into any room. It's also designed with the environment in mind.
*Compatible smart devices required.
**Personalized features required additional enrollment and set up, for up to six users.
***To make calls, you and the person your calling must both have a Google Duo account.
****Compatible smart lights or smart thermostat required.
Google Nest Learning Thermostat E + Nest Mini (Gen 2) + 2-Pack Deco Smart Plugs
Google Nest Learning Thermostat E Product Features:
It's easy to save energy.
The Nest Thermostat E turns itself down when you're away. You can control it from anywhere. And its frosted display is beautifully designed to blend right in.
Designed to go unnoticed.
The Nest Thermostat E's frosted display blends in beautifully. Up close, everything you see is soft and subtle, like a watercolor. And it all disappears when you walk away.
Turn it up or down from anywhere.
With the Nest app, change the temperature from the beach, the office or your bed.1
Remote control.
From your phone, tablet or laptop.
Check your Energy History.
See how much you save. And see how to save more.
Know if there's a problem.
Nest can tell you about your furnace, filters and more.
Family Accounts.
Everyone at home can use the Nest app.
Helps save energy. And keeps you comfortable.
The Nest Thermostat E's energy-saving features have saved people an average of 10% to 12% on heating bills and 15% on cooling bills. Based on typical energy costs, that's an estimated average savings of $131 to $145 a year.2
Look for the Nest Leaf.
When you change to an energy-saving temperature, you'll see the Nest Leaf.
Start with a simple schedule.
Up in the morning, down at night. Adjust it whenever you like from the Nest app.
Choose which rooms matter most.
With the Nest Temperature Sensor, the baby's room or the living room can get top priority. (Sold separately.)
Turns itself down when you leave.
It uses your phone's location to know you're away.
Savings all year round.
With our energy partners, you can get rebates, rewards and other ways to save.
Technical Specifications:
Size and weight
Mass: 4.9 oz (139 g)
Diameter: 3.19 in (8.1 cm)
Height: 1.14 in (2.89 cm)
Color:White
Screen
24-bit color LCD
320 x 320 resolution at 182 pixels per inch
1.76 in (4.5 cm) diameter
Languages
English (US, UK)
Dutch
French (Canada, France)
Italian
Spanish (North America, Spain)
Compatibility
The Nest Thermostat E works with 85% of 24V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal.
Heating and Cooling: 1 stage of heating (W1) and cooling (Y1) and a second stage of either heating (W2) or cooling (Y2).
Heat pump: with auxiliary and emergency heat (O/B, AUX)
Fan (G)
Power (C, Rh or Rc)
The Nest Thermostat E is designed to work even if your home doesn't have a common (C) wire, but installing a new C wire may be required.
Sensors
Temperature
Humidity
Proximity/Occupancy
Ambient light
Battery
Built-in rechargeable lithium-ion battery
Power consumption
Less than 1 kWh/month
Connectivity requirements
Wi-Fi internet connection
Phone or tablet running iOS or Android
Nest app
Wireless
802.11b/g/n 2.4GHz, 802.11a/n 5GHz
802.15.4 2.4GHz
Bluetooth Low Energy
Certification
UL 60730-1, Standard for Safety Automatic Controls
UL 60730-2-9, Particular Requirements for Temperature Sensing Controls
ENERGY STAR®
Optional trim plate
Mounting screws and labels
Installation Guide
Pro installation card
Nest Temperature Sensor
Smart Mood Light WiFi Smart Night Light
Specification: DC Input: 5V 1A Charging time: about 2 hours Work time: about 8 hours of continuous work IR remote control distance: 8M Wireless standard: 2.4G 802.11 b/g/n Waterproof: IP67 Light battery: Lithium-ion 1000mAH(built-in) Remote controller battery: 2AAA (not included) Color: White Material: PE Shape: Square Operating temperature: 0 ºC ~ 45 ºC Light size: 101010cm Light weight: 245g Package Information: Package Size: Approach. 1610.510. 5cm/ 6.34. 134.13 in Package Weight: Approach. 375g/ 0.83 lb
Smart Motion Sensor Alarm Wireless Doorbell Plug-in Door Bell Home Security Infrared Detector Alert Kits with 2 PIR Sensors 1 Receiver 38 Chime Tunes LED Indicators
Features: The Infrared sensor detects the motion and sends signals to the receiver. Switch among 38 kinds of ringing sound with bright LED Light. The portable wireless plug-in receiver can be plugged into any standard socket. And the sensor is wall mountable. The Working Range is up to 300 feet (70 meters) between the receiver and the sensor, allowing you to place it separately in a long distance. Ideal for front doors, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion. Great to alert storekeepers that are working in the back, or out of sight, when customers entering their stores. Specifications: Working Voltage of the Receiver: AC 110V-240V Working Voltage of the PIR Sensor: 4.5V Battery of the PIR Sensor: 3 * AAA batteries (Note included) Music: 38 different songs optional Working Range: Up to 70 meters Infrared Sensing Distance: 3-7 meters Color: White Receiver size: 8.0 * 7.6 * 3.3 cm / Receiver Weight: Approx. 62g / 2.18 oz PIR Sensor size: 8.0 * 5.9 * 4.5 cm / PIR Sensor Weight: Approx. 46g / 1.62 oz Package Size: Approx. 14.2 * 9 * 8.7 cm / 12.36 * 8.66 * 4.88 in Package Weight: Approx. 227g / 8.00 oz Package List: 2 * PIR Sensor 1 * Receiver 2 * Sets of Wall-Mount Sensor Clips 1 * User Manual
7.9" Colorful RGB 3D Printed Mushroom Night Light
Specifications: Diameter: 15cm/ 5.9 in; 20cm/ 7.9 in Optional Power supply: USB DC 2.5 charging Voltage: 3.7V Wattage: 1.85W Battery capacity: 1 500mAh 902030 polymer lithium battery (included) Brightness: stepless adjustment Lamp Bead Model: 5050RGB Mixed Color SMD Light Number of Lamp Beads: 3pcs Charging time: 1-3 hours Working time: 6-10 hours (depends on brightness) Color temperature: 4000K Remote Control Battery: 1CR2025 (included) Cover Color: White Material: PLA Item Size: Approx. 14 14 15cm (LWH) Item Weight: Approx. 200g / 7.1 oz Package Information: Package Size: Approx. 17.2 15.6 15.6 cm / 6.8 6.1 6.1 in Package Weight: Approx. 340g / 12oz
