close

Buy Modular Adapters Products online in United States | Rehmie.com

Sort by
SAMD21 M0-Mini Module 32-bit ARM Cortex M0 Core Development Board For Zero M0 for Arduino - products that work with official Arduino boards
Description: The SAMD21 M0-represents a powerful, 32-bit extension of the UNO platform, but to small size like Micro or & nbsp; Nano. The board is powered by SAMD21 MCU, featuring a 32-bit ARM Cortex & reg; M0 core. Compatible with Zero and & nbsp; M0. The & nbsp; SAMD21 M0-board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development. & nbsp; The Zero applications span from smart IoT devices, wearable technology, high-tech automation, to crazy robotics. The board is powered by SAMD21 MCU, which features a 32-bit ARM Cortex & reg; M0+ core. One of its most important features is & nbsp; Atmel & rsquo; s Embedded Debugger & nbsp; (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device and bootloader programming. Package included: 1 x SAMD21 M0-32-bit ARM Cortex M0 Core (UnSoldered)
Mimo Tech
International 76000701 TS DB9M Modem Adapter 4Pack
Product description Cabling your serial devices to a product is now easier than ever with these new cable adapters. While many custom cabling solutions can leave you with a cable that is either too long or too short for your application the cable adapters are used with mercially available CAT 5 cable of any length. Simply plug standard CAT 5 cable into your product connect a cable adapter to the other end and plug the adapter into your device. The TS DB-9M Modem Adapter is designed for DCE devices such as modems with DB-9 female ports. Primary InformationNetwork Cable Type: Modem cableLeft Connector Gender: MaleRight Connector Gender: FemaleLeft Connector Type: 9 pin D-Sub (DB-9)Right Connector Type: RJ-45Networking / Compliant Standards: CAT 5Supported Equipment Type: DCEUNSPSC CodeUNSPSC Code: 26121616Product IDUPC: 663072927288Manufacturer Part: 76000701
Archtek
VGA OV7670 CMOS Camera Lens Module CMOS 640x480 SCCB With I2C Interface Adapter Plate
Features: & nbsp; 1. High sensitivity for low-light operation 2. Low operating voltage for embedded application 3. Standard SCCB interface compatible with I2C interface 4. With AL422 3M-Bits FIFO. 5. Raw RGB, RGB (GRB 4:2: 2, RGB565/555/444), YUV ( 4:2: 2) and YCbCr ( 4:2: 2) output format. 6. Support VGA, CIF and from CIF to 40 x 30 format 7. Vario Pixel method for sub-sampling 8. Auto image control: AEC, AGC, AWB, ABF, ABLC 9. Image quality control: Color saturation, hue, gamma, sharpness and anti-blooming 10. ISP includes noise reduction and defect correction 11. Support image scaling 12. Lens shading correction 13. Flicker 50/60Hz auto detection 14. Color saturation level auto adjust 15. Edge enhancement level auto adjust 16. De-noise level auto adjust & nbsp; Parameters: & nbsp; IO voltage: 2.5V to 3.0V Operating power: 60mW/15fpsVGAYUV Sleeping mode:
Mimo Tech
CREE H4 HB2 9003 5500W 650000LM 4-Sides LED Headlight Kit Hi/Lo Power Bulb 6000K
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 60 Days Refund will be given as: Money back or replacement buyer's choice Return shipping will be paid by: Seller Brand: Manufacturer Part Number: Does Not Apply More LED Kit We Have: 9005 9006 HB4 9007 HB5 H11 H8 H9 H13 9008 H4 9003 Number of Bulbs: 2 Other Available Type: Foglights, Fog Lights Kit Other LED Kit We Have: H10 HB2 H1 H7 9004 HB1 HB3 9011 9012 9145 9140 Other Part Number: High/Low Beam Headlamps Head Lights Bulbs Placement on Vehicle: Front Superseded Part Number: HB2 Replace Halogen Xenon HID White Conversion Driving Lamps To Fit: Headlight Type: Headlight Kit Warranty: 5 Year Waterproof Rng: IP68 Shockproof, Dustproof and Waterproof 2 To Fit: Motorcycle, Motorbike, Bike, Car, Truck, SUV, ATV, UTB Beam Angle: 360 Degrees Bulb Size: H4 9003 Color Temperature: 6000K Fitment Type: Direct Replacement Heat Control: A380 Aluminum Shell With Built-In Turbo Cool Fan LED Type: 4-Sided LED, Total 4pcs Long CREE COB LEDs Per Bulb Lifetime: Over 50, 000 Hours Voltage: DC 9V - 32V Fit 12V 24V Vehicle
xfactory
ESP-32F Module + Adapter Board WiFi bluetooth Dual Core CPU MCU IoT for Arduino - products that work with official Arduino boards
Introduction: & nbsp; The ESP-32F is a universal WiFi-BT-BLE MCU module that is powerful and versatile for low-power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 decoding. The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled or powered up. The clock frequency can be adjusted from 80 MHz to 240 MHz. The user can power off the CPU and use a low-power coprocessor to constantly monitor the status changes of the peripherals or whether certain analogs exceed the threshold. The ESP32 also integrates a wide range of peripherals including capacitive touch sensors, Hall sensors, low noise sense amplifiers, SD card interfaces, Ethernet interfaces, high speed SDIO, SPI, UART, I2S and I2C. The ESP-32F integrates traditional bluetooth, bluetooth low energy and Wi-Fi for a wide range of uses: Wi-Fi supports a wide range of communication connections and direct Internet connection via a router; bluetooth allows users to connect to mobile phones or broadcast BLE Beacon for signal detection. The ESP32 chip & #39; s sleep current is less than 5 & mu; A, making it suitable for battery-powered wearable electronics. The ESP-32F supports data rates up to 150 Mbps and a power amplifier with an output power of 22 dBm for maximum wireless communication. As a result, the chip has industry-leading specifications and performs in terms of high integration, wireless transmission distance, power consumption, and network connectivity. The ESP32 & #39; s operating system is a freeRTOS with LWIP and TLS 1.2 with hardware acceleration. The chip also supports OTA encryption upgrades, and developers can continue to upgrade after the product is released. & nbsp; CPU: & nbsp; Xtensa & reg; 32-bit LX6 single/dual-core processor with up to 600 DMIPS 448 KB ROM 520 KB SRAM 16 KB SRAM in RTC QSPI can connect up to 4 Flash / SRAM, up to 16 MB per Flash Supply voltage: 2.2V to 3.6V Working current: average: 80 mA Package size: 18 mm x 25.5 mm x 2.8 mm Temperature range: -40°C ~ +85°C & nbsp; Clock and Timer: & nbsp; Built-in 8 MHz oscillator with self-calibration Built-in RC oscillator for self-calibration Support for external 2 MHz to 40 MHz crystal Supports an external 32 kHz crystal for RTC with self-calibration 2 timer groups, each consisting of 2 64-bit general-purpose timers and 1 main system watchdog RTC timer with sub-second precision RTC watchdog & nbsp; Peripheral interface: & nbsp; 12-bit SAR ADC with up to 18 channels 2 8-bit D/A converters 10 touch sensors Temperature Sensor 4 SPI 2 I2S 2 I2C 3 UAR Ts 1 Host SD / eMMC / SDIO 1 Slave SDIO / SPI Ethernet MAC interface with dedicated DMA supporting IEEE 1588 CAN 2.0 IR (TX / RX) Motor PWM LED PWM, up to 16 channels Hall sensor Ultra low noise preamplifier & nbsp; Wi-Fi: & nbsp; Standard: & nbsp; FCC/CE/IC/TELEC/KCC/SRRC/NCC & nbsp; Protocol: & nbsp; 802.11 b/g/n/d/e/i/k/r ( 802.11 n, speeds up to 150 Mbps) A-PDU and A-MSDU aggregation, support 0.4 & mu; s guard interval & nbsp; Frequency Range: & nbsp; 2.4 ~ 2.5 GHz & nbsp; Wi-Fi mode: & nbsp; Station/softAP/SoftAP+station/P2P & nbsp; Security Mechanism: & nbsp; WPA/WPA2/WPA2-Enterprise/WPS & nbsp; Encryption type: & nbsp; AES/RSA/ECC/SHA & nbsp; bluetooth: & nbsp; Protocol: & nbsp; Compliant with bluetooth v 4.2 BR/EDR and BLE standards & nbsp; RF: & nbsp; NZIF receiver with -98 dBm sensitivity Class-1, Class-2 and Class-3 transmitters AFH & nbsp; Audio: & nbsp; CVSD and SBC audio & nbsp; Package includes: & nbsp; 1 x ESP-32F module 1 x Adapter plate 2 x Pins
Mimo Tech
Waveshare® 1.02 Inch e-Paper Flexible Ink Screen Module Bare Screen Optional Partial Refresh Bareboard
Feature: No backlight is required, and the content of the last screen can be maintained for a long time after power off. Very low power consumption, basically only consumes power during refresh. SPI control interface, can connect to Raspberry/Jetson Nano/Arduin0/Nucleo and other main control boards. Analysis load level conversion chip, compatible with 3.3V and 5V singlechip interface. Specification: Working voltage: 3.3V /5VCommunication interface: 3-wire SPI, 4-wire SPI Dimensions: 42x 27mmDisplay size: 21.76 x 14mmDot pitch: 0.175 x 0.17R esolution: 128*80Display color: black, whiteGray level: 2Global refresh: 2sRefresh power consumption: 26.4 mW (typ. )Standby power consumption: 170°PIN Function: VCC: 3.3V /5V power inputGND: power groundDIN: SPI communication MOSI pinCLK: SPI communication SCK pinCS: SPI chip select pin (active low) DC: data/command control pin (high level indicates data, low level indicates command)RST: External reset pin (low level reset) BUSY: Busy output pin (means & nbsp; low level busy) Documents: Schematic: Click here to openInstruction: Click here to openSample tutorial: Click here to openGithub: Click here to openPackage includes: Bareboard: 1 x Display boardWith driver board: 1 x 1.02 inch display1 x 8pin dupont cable
Mimo Tech
5pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
Avaya M8024R-100TX P880 24-Port 100 Base TX Wired Plug-in Switch Module
Avaya M8024R-100TX P880 24-Port 100 Base TX Wired Plug-in Switch Module & nbsp;
Avaya
3pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
10 Pcs Silicone Coasters Fashion Lace Floral Hollow Cup Mats Non-slip Insulation Placemats (Random Color)
DescriptionCreative fashion lace hollow-out silicone coasters, perfect size just right for placing your cups, coffee mugs, bottle on the placemats, perfectly protect your kitchen surfaces and tables from scorching and scratching dishware. Essential and practical home kitchen tool that you need have.Features- Color: Random color- Material: Silicone- Size: 9 x 9 x 0.2 cm- Silicone coasters, great accessory for your to protect your desktop.- Fashion hollow-out lace deisgn, add more beauty and color to your dull dinning table.- Perfect size just right for placing your cups, coffee mugs, bottle on the placemats.- Non-slip and heat resistant, you don’t worry about your desk will be damaged by hot drinks.- Perfect decorations for home kitchen table, office, coffee shop and club.10 x Silicone Coaster
BESTONZON
TP257R 2-In-1 Modular Adapter
*****TP257R 2-In-1 Modular Adapter
Liberty AV
Waveshare® 1.02 Inch e-Paper Flexible Ink Screen Module Bare Screen Optional Partial Refresh Bareboard
Feature: No backlight is required, and the content of the last screen can be maintained for a long time after power off. Very low power consumption, basically only consumes power during refresh. SPI control interface, can connect to Raspberry/Jetson Nano/Arduin0/Nucleo and other main control boards. Analysis load level conversion chip, compatible with 3.3V and 5V singlechip interface. Specification: Working voltage: 3.3V /5VCommunication interface: 3-wire SPI, 4-wire SPI Dimensions: 42x 27mmDisplay size: 21.76 x 14mmDot pitch: 0.175 x 0.17R esolution: 128*80Display color: black, whiteGray level: 2Global refresh: 2sRefresh power consumption: 26.4 mW (typ. )Standby power consumption: 170°PIN Function: VCC: 3.3V /5V power inputGND: power groundDIN: SPI communication MOSI pinCLK: SPI communication SCK pinCS: SPI chip select pin (active low) DC: data/command control pin (high level indicates data, low level indicates command)RST: External reset pin (low level reset) BUSY: Busy output pin (means & nbsp; low level busy) Documents: Schematic: Click here to openInstruction: Click here to openSample tutorial: Click here to openGithub: Click here to openPackage includes: Bareboard: 1 x Display boardWith driver board: 1 x 1.02 inch display1 x 8pin dupont cable
Mimo Tech
com DB9 to RJ45 Modular Adapter FF Serial adapter DB9 F to RJ45 F GC98FF
The GC98FFModular Adapter features a DB9 female connector and an RJ45 female connector. Used for modular RS232, RS422 and RS485 connections, the adapter converts your DB9 male connection into an RJ45 female connection. The adapter allows for custom serial pin out configurations. The DB9F/RJ45F adapter is backed by lifetime warranty, guaranteeing long-lasting durability.
PowerStar
30pcs Micro TF Card Memory Shield Module SPI Micro Storage Card Adapter for Arduino - products that work with official Arduino boards
Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. users can directly use the IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (
Mimo Tech
Green Serial IIC/I2C/TWI 2004 20X4 Character LCD LED Display Stand For Arduino
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Brand: MPN: Does Not Apply Country/Region of Manufacture: China
xfactory
5pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
VGA OV7670 CMOS Camera Lens Module CMOS 640x480 SCCB With I2C Interface Adapter Plate
Features: & nbsp; 1. High sensitivity for low-light operation 2. Low operating voltage for embedded application 3. Standard SCCB interface compatible with I2C interface 4. With AL422 3M-Bits FIFO. 5. Raw RGB, RGB (GRB 4:2: 2, RGB565/555/444), YUV ( 4:2: 2) and YCbCr ( 4:2: 2) output format. 6. Support VGA, CIF and from CIF to 40 x 30 format 7. Vario Pixel method for sub-sampling 8. Auto image control: AEC, AGC, AWB, ABF, ABLC 9. Image quality control: Color saturation, hue, gamma, sharpness and anti-blooming 10. ISP includes noise reduction and defect correction 11. Support image scaling 12. Lens shading correction 13. Flicker 50/60Hz auto detection 14. Color saturation level auto adjust 15. Edge enhancement level auto adjust 16. De-noise level auto adjust & nbsp; Parameters: & nbsp; IO voltage: 2.5V to 3.0V Operating power: 60mW/15fpsVGAYUV Sleeping mode:
Mimo Tech
20Pcs TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger Module
Specification: & nbsp; Product name: Lithium Battery Charging BoardInput voltage: 5VMaximum charging current: 1000 mACharge cut-off voltage: 4.2 V + / - 1%Battery overcharge protection voltage: 2.5 VBattery over-current protection current: 3 AInput interface: micro USB Size: 27mm x 17mm & nbsp; How to Use: & nbsp; 1. Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery, and still retain the input voltage wiring solder joints, can be very convenient. 2. Connect the battery to B + B -, insert mobile phone charger to the USB Female then red light is charging and green is full of charged. & nbsp; Package includes: & nbsp; 20 x Lithium Battery Charging Module (battery not included) & nbsp; Note: & nbsp; We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. All dimensions are measured by hand, please allow 0.5 -1 inch difference due to manual measurement. (1inch= 2.54 cm). There Are No Instructions Included In This Kit. Professional Installation Is Highly Recommended!
Mimo Tech
Waveshare® micro:bit microbit 1.8 inch LCD Display Expansion Board Module Support for Arduino
Documents: Schematic: Click here to openSample tutorial: Click here to openFeatures: & nbsp; Onboard micro: bit interface, can be directly plugged inLCD built-in driver chip ST7735S, supports 65K colorThe onboard external SRAM chip 23LC1024 can be used as video memory, no longer worry about insufficient memoryUse SPI interface to ensure that it does not occupy too much interface pin resourcesThe backlight brightness can be controlled by PWM Reserve all control interface pads for easy access to main control boards such as Arduino/NucleoProvide complete supporting information manuals (Micro: bit graphical routines/user manuals, etc. )Parameter: Driver chip: ST7735SResolution: 160×128Display color: RGB, 65K colorWorking voltage: 3.3VD imensions: 61mm × 51.5 mm PIN micro: bit interface Description Vcc 3V3 Power is positive GND GND Power ground MISO P14 SPI data master input/slave output MOSI P15 SPI data master output/slave input SCK P13 SPI clock input LCD_CS P16 LCD chip selection RAM_CS P2 SRAM chip select DC P12 LCD data/command RST P8 LCD reset BL P1 LCD backlight Package includes: 1 x & nbsp; 1.8 inch LCD for micro: bit
Mimo Tech
StarTech.com GC258MF DB25 to RJ45 Modular Adapter - M/F
This DB25M to RJ45F adapter is used for modular RS232, RS422, and RS485 connections. The DB25M to RJ45F adapter features a highly durable design and is backed by StarTech.com's Lifetime warranty. With data transfer adapter transfer files to any device with the great convenienceRJ-45 adapter is easy to be replaced Product TypeData Transfer AdapterManufacturer Part NumberGC258MFLimited Warranty2 YearColorGrayProduct NameDB25M to RJ45F AdapterConnector on First End1 x 25-pin DB-25 MaleConnector on Second End1 x RJ-45 FemaleAdapter TypeRJ-45
STARTECH
HP 587324-001 Smart Array P410 Flash Backed Write Cache FBWC Battery Module
-Every Item is individually tested before shipping them to our customer -All items will come sealed in an Anti-Static Bag, and packaged securely. -All parts are 100% Genuine parts.
HP
3pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
3Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter
Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. users can directly use the IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (
Mimo Tech
DC-005 Power Supply Module DC Power Module 5.5-2.1mm Power Adapter Board
Specification: Power Output Interface: 2 Channel VCC, 2; Channel GNDSize: 2.8 cm* 1.3 cmApplicable connector: 5.5 * 2.1 mmPackage included: 1 x; DC Power Adapter Board
Mimo Tech
3pcs DC-005 Power Supply Module DC Power Module 5.5-2.1mm Power Adapter Board
Specification: Power Output Interface: 2 Channel VCC, 2; Channel GNDSize: 2.8 cm* 1.3 cmApplicable connector: 5.5 * 2.1 mmPackage included: 3 x; DC Power Adapter Board
Mimo Tech
Electric Water Siphon Pump Liquid Transfer Gas Oil Fish Tank Battery Operated US
Restocking Fee: No Return shipping will be paid by: Seller All returns accepted: Returns Accepted Item must be returned within: 60 Days Refund will be given as: Money back or replacement buyer's choice Model: Liquid Pump Type: Liquid Pump MPN: Does Not Apply Color: Red Material: Plastic Battery: 2 x D battery not included Size: 59.5 x4cm/ 23.5 x 1.6 in Speed: 5-6 quarts per minute Brand: Can pump: Petrol, Gas, Water, Oil
cocokkmallx
HP AF103A Cat5 Rj45Db9 Dce Female 1 Pack Serial Adapter
General InformationManufacturer: HP Inc. Manufacturer Part Number: AF103AManufacturer Website Address: http: //www. hp. comBrand Name: HPProduct Name: DCE Serial AdapterProduct Type: Data Transfer CableTechnical InformationConnector on First End: 1 x RJ-45Connector on Second End: 1 x DB-9 Serial
HP
# 611-031.1 Wheel Nut LH Thread - Set 4 - 1/2-20L - Fits OE# 1463254
Returns Accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return policy details: Return shipping will be paid by: Buyer Other Part Number: MSP3377x4 Interchange Part Number: 1463254, 499550 Warranty: 1 Year Brand: Manufacturer Part Number: MSP3377x4 Fitment Type: Direct Replacement
discoverzone
StarTech.com MOD4DOCKACPD Laptop Docking Module for Conference Table Connectivity Box - 4K HDMI - USB-C / USB-A - USB-C PD - Boardroom Docking Station (MOD4DOCKACPD)
StarTech.com MOD4DOCKACPD Laptop Docking Module for Conference Table Connectivity Box - 4K HDMI - USB-C / USB-A - USB-C PD - Boardroom Docking Station (MOD4DOCKACPD)
STARTECH
5pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
COB 4-Sides CREE H4 9003 390000LM 2500W LED Headlight Kit Hi/Lo Beam Bulbs 6000K
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 60 Days Refund will be given as: Money back or replacement buyer's choice Return shipping will be paid by: Seller Color: Red MPN: Does Not Apply Brand: Bulb Type: LED Manufacturer Part Number: Does Not Apply More LED Kit We Have: 9005 9006 HB4 9007 HB5 H11 H8 H9 H13 9008 H4 9003 Number of Bulbs: 2 Other Available Type: Foglights, Fog Lights Kit Other LED Kit We Have: H10 HB2 H1 H7 9004 HB1 HB3 9011 9012 9145 9140 Other Part Number: High/Low Beam Headlamps Head Lights Bulbs Placement on Vehicle: Front Superseded Part Number: HB2 Replace Halogen Xenon HID White Conversion Driving Lamps To Fit: Headlight Type: Headlight Kit Warranty: 5 Year Waterproof Rng: IP68 Shockproof, Dustproof and Waterproof 2 To Fit: Motorcycle, Motorbike, Bike, Car, Truck, SUV, ATV, UTB Beam Angle: 360 Degrees Bulb Size: H4 9003 Color Temperature: 6000K Fitment Type: Direct Replacement Heat Control: A380 Aluminum Shell With Built-In Turbo Cool Fan LED Type: 4-Sided LED, Total 4pcs Long CREE COB LEDs Per Bulb Lifetime: Over 50, 000 Hours Voltage: DC 9V - 32V Fit 12V 24V Vehicle
xfactory
100X ThunderBolt Mini DisplayPort to HDMI Cable for MacBook Pro Air Surface Pro
All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money back or replacement buyer's choice Return policy details: Return shipping will be paid by: Buyer Type: Mini DisplayPort Connector A: HDMI 1.4 Standard Male Connectors B: Mini DisplayPort Male MPN: Does Not Apply Brand: Connection Split/Duplicon: None 1: 1 Cable Length: 3 ft. Color: White Manufacturer warranty: Yes
xfactory
3pcs ESP-12F ESP8266 Serial WIFI Module Wireless Transmission Controller With Adapter Board
Features:; The series motherboard or compatible motherboard can be directly. Power supply voltage: 5VModule operating current: 240 mA (maximum) Baud rate: default 115200, can be modified by AT commandWireless network mode: station / soft access point / soft access point + stationWireless standard: 802.11 b / g / nWIFI @ 2.4 GHz, support wireless protocol / wireless protocol 2 security modeWith the AT command set, development is simple and quick to get startedUses: various DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment; Package includes:; 3 x ESP8266 serial WIFI module
Mimo Tech
1pc Multifunctional Convenient Durable Plate 5-compartment for Restaurant Office
DescriptionMade with sturdy melamine material, the plate has to your body, perfect for sharing snacks and appetizers with guests. The plate is just the right size for fruits, dried fruits, desserts and snacks. It's great for entertaining family and friends at get-togethers.Features- Material: Plastic. - Serving plate consists of 5 divided sections, excellent for serving snacks and appetizers.- Designed with smooth round edges, light to hold and safe to use; sturdy and durable, no worry that it may break once falling down.- Comes in white color that adds elegance, creating a wonderful center piece for any table setting.- Perfect for home, caterers, office parties, banquet facilities and any other indoor/outdoor events.- Can be used in ozone disinfector and refrigerator.1 x Plate
BESTONZON
GNSS IPC 9600bps RS-232 Industrial computer M8030-KT 3.0 meters DB-9 female interface GPS GLONASS Receiver BN-583D
GNSS IPC 9600bps RS-232 Industrial computer M8030-KT 3.0 meters DB-9 female interface GPS GLONASS Receiver BN-583D
DP-iot
3pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module For DIP
Features: ESP-32S supporting adapter board, 2.54 mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.; Package Included:; 3 x ESP-32S Matching Adapter Board
Mimo Tech
5pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
20Pcs TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger Module
Specification: & nbsp; Product name: Lithium Battery Charging BoardInput voltage: 5VMaximum charging current: 1000 mACharge cut-off voltage: 4.2 V + / - 1%Battery overcharge protection voltage: 2.5 VBattery over-current protection current: 3 AInput interface: micro USB Size: 27mm x 17mm & nbsp; How to Use: & nbsp; 1. Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery, and still retain the input voltage wiring solder joints, can be very convenient. 2. Connect the battery to B + B -, insert mobile phone charger to the USB Female then red light is charging and green is full of charged. & nbsp; Package includes: & nbsp; 20 x Lithium Battery Charging Module (battery not included) & nbsp; Note: & nbsp; We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. All dimensions are measured by hand, please allow 0.5 -1 inch difference due to manual measurement. (1inch= 2.54 cm). There Are No Instructions Included In This Kit. Professional Installation Is Highly Recommended!
Mimo Tech
Dorman # 611-196.1 Wheel Lug Nuts - Set of 6 - M14-2.0 - Fits OE# F81Z1012AA
Returns Accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return policy details: Return shipping will be paid by: Buyer Other Part Number: MSP3336x6 Interchange Part Number: F81Z 1012-AA, YL3Z 1012-AA Warranty: 1 Year Brand: Manufacturer Part Number: MSP3336x6 Fitment Type: Direct Replacement
discoverzone
3Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12
3Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This; Adapter Plate is for; ESP-07 ESP-08 ESP-12, a test board with IO lead out. Note: Need to solder; 3V regulator by youself. ESP-07, ESP-08, ESP-12 module board are not included!!! Package included: 3 x; Serial Port WIFI ESP8266 Module Adapter Plate6 x Pins;;
Mimo Tech
automatic water level controller automatic water pump controller for overhead water tank with two non-contact liquid level sensors automatic water tank filling system
1. AC95 ~ 265V wide voltage power supply. 2. Relay dry node output can be applied to various load control. 3. The control is diversified, and the pump can be controlled manually or automatically. 4. The installation is simple and convenient, it can be screwed or installed on the rail of the electric box
Vito
SAMD21 M0 Module 32-bit ARM Cortex M0 Core Development Board for Arduino - products that work with official Arduino boards
Description: The SAMD21 & nbsp; M0 & nbsp; represents & nbsp; a & nbsp; powerful, & nbsp; 32-bit & nbsp; extension & nbsp; of & nbsp; the & nbsp; & nbsp; UNO & nbsp; platform. & nbsp; The & nbsp; board & nbsp; is & nbsp; powered & nbsp; by SAMD21 & nbsp; MCU, & nbsp; featuring & nbsp; a & nbsp; 32-bit & nbsp; ARM & nbsp; Cortex & nbsp; M0 & nbsp; core. Compatible & nbsp; with & nbsp; & nbsp; Zero & nbsp; and & nbsp; & nbsp; M0. The & nbsp; SAMD21 & nbsp; M0 & nbsp; board & nbsp; expands & nbsp; the & nbsp; family & nbsp; by & nbsp; providing & nbsp; increased & nbsp; performance, & nbsp; enabling & nbsp; a & nbsp; variety & nbsp; of & nbsp; project & nbsp; opportunities & nbsp; for & nbsp; devices, & nbsp; and & nbsp; acts & nbsp; as & nbsp; a & nbsp; great & nbsp; educational & nbsp; tool & nbsp; for & nbsp; learning & nbsp; about & nbsp; 32-bit & nbsp; application & nbsp; development. & nbsp; The & nbsp; Zero & nbsp; applications & nbsp; span & nbsp; from & nbsp; smart & nbsp; IoT & nbsp; devices, & nbsp; wearable & nbsp; technology, & nbsp; high tech & nbsp; automation, & nbsp; to & nbsp; crazy & nbsp; robotics. & nbsp; The & nbsp; board & nbsp; is & nbsp; powered & nbsp; by SAMD21 & nbsp; MCU, & nbsp; which & nbsp; features & nbsp; a & nbsp; 32-bit & nbsp; ARM & nbsp; Cortex M0+ & nbsp; core. & nbsp; One & nbsp; of & nbsp; its & nbsp; most & nbsp; important & nbsp; features & nbsp; is & nbsp; Atmel & rsquo; s & nbsp; Embedded & nbsp; Debugger & nbsp; (EDBG), & nbsp; which & nbsp; provides & nbsp; a & nbsp; full & nbsp; debug & nbsp; interface & nbsp; without & nbsp; the & nbsp; need & nbsp; for & nbsp; additional & nbsp; hardware, & nbsp; significantly & nbsp; increasing & nbsp; the & nbsp; ease-of-use & nbsp; for & nbsp; software & nbsp; debugging. & nbsp; EDBG & nbsp; also & nbsp; supports & nbsp; a & nbsp; virtual & nbsp; COM & nbsp; port & nbsp; that & nbsp; can & nbsp; be & nbsp; used & nbsp; for & nbsp; device & nbsp; and & nbsp; bootloader & nbsp; programming. & nbsp; Package included: 1 x SAMD21 M0 32-bit ARM Cortex M0 Core
Mimo Tech
2020 New Educonal Toys Gift for Toddlers Baby Kids Boy Girl Learning Tablet
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 60 Days Refund will be given as: Money back or replacement buyer's choice Return shipping will be paid by: Seller Gender: Unisex Model: Does Not Apply Country/Region of Manufacture: United States Theme: Numbers Letters Type: learning toy MPN: Does Not Apply Character Family: Does Not Apply Age Level: 2 Years and Up Brand: Recommended Age Range: 2 Years and Up
discoverzone
5pcs DC-005 Power Supply Module DC Power Module 5.5-2.1mm Power Adapter Board
Specification: Power Output Interface: 2 Channel VCC, 2; Channel GNDSize: 2.8 cm* 1.3 cmApplicable connector: 5.5 * 2.1 mmPackage included: 5 x; DC Power Adapter Board
Mimo Tech
10 X Pcs RJ12 Plug 6P6C Phone Modular Telephone Connector Adapter DSL Crimp RJ11
Restocking Fee : No All returns accepted : Returns Accepted Item must be returned within : 30 Days Refund will be given as : Money Back Return shipping will be paid by : Buyer Type : Plug MPN : Does Not Apply Brand : Apollofactory Connector Type : 6P6C
Apollofactory
Avocent ADB0025 RJ-45F to DB-25M Crossover Adapter
Avocent ADB0025 RJ-45F to DB-25M Crossover Adapter
Avocent
10Pcs Micro SD TF Card Memory Shield Module SPI Micro SD Adapter
Features: The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. users can directly use the IDE comes with an SD card to complete the library card initialization and read-write Module features are as follows: Support Micro SD Card (
Mimo Tech
Door Air Curtain 2 Speeds Air Curtain Commercial 24-Inch w/2 x Limit Switch
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money back or replacement buyer's choice Return shipping will be paid by: Seller Brand: MPN: IREWL009971582688340 Model: 24inch-Mesh Country/Region of Manufacture: China California Prop 65 Warning: No Custom Bundle: Yes Bundle Description: 1 x Air Curtain; 2 x Limit Switches; a Set of Installon Tools Modified Item: No Modificon Description: No High Speed: 1007 CFM Low Speed: 830 CFM Suitable Door Height: 137.8 quot; 3.5 m Power Cord Length: 59quot; +71quot; 1.5 + 1.8 m Net Weight: 24.3 lbs 11 kg Product Dimensions: 23.6 quot; x 10.2 quot; x 10.6 quot; 600x260x270mm For: Shop, Factory, Restaurant Use Voltage: 110V/60HZ Color: White Feature 1: 1 x Plunger Micro Switch Feature 2: 1 x Roller Limit Switch
discoverzone
5Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12
This; Adapter Plate is for; ESP07 ESP08 ESP12, a test board with IO lead out. Note: Need to solder; 3V regulator by youself. ESP07, ESP08, ESP12 module board are not included!!! Package included: 5 x; Serial Port WIFI ESP8266 Module Adapter Plate10 x Pins
Mimo Tech
3pcs ESP-12F ESP8266 Serial WIFI Module Wireless Transmission Controller With Adapter Board
Features:; The series motherboard or compatible motherboard can be directly. Power supply voltage: 5VModule operating current: 240 mA (maximum) Baud rate: default 115200, can be modified by AT commandWireless network mode: station / soft access point / soft access point + stationWireless standard: 802.11 b / g / nWIFI @ 2.4 GHz, support wireless protocol / wireless protocol 2 security modeWith the AT command set, development is simple and quick to get startedUses: various DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment; Package includes:; 3 x ESP8266 serial WIFI module
Mimo Tech
Module GSM/GPRS M590E SMS Message Kit DIY Arduino Pi STM32 ESP8266 Hot US
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer MPN: Does not apply Brand: UPC: Does not apply EAN: Does not apply
dealfans
100FT Split Wire Loom Conduit Corrugated Choose Hot Size Flex Cable Plastic Tube
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 60 Days Refund will be given as: Money back or replacement buyer's choice Return shipping will be paid by: Seller UPC: 600685100400 Type: Expandable Braided Sleeving MPN: Does Not Apply Brand: EAN: Does not apply: Does not apply
discoverzone
MODULAR ADAPTER KIT RJ45 8 WIRE - DB25 M - GR
MODULAR ADAPTER KIT RJ45 8 WIRE - DB25 M - GR
Black Box Innovations
DB9-M 2 Row 5mm Pitch Adapter Female Terminals Board Nut Type D-Sub Connector
Adapter terminals to facilitate the project, site commissioning equipment, All signal ports named and labeled clearly Each adapter plate with special housing, comprehensive protection circuitry, no longer needto worry about wiring exposed; The board clearly marked positive number, wiring more convenient; Compliant assembly, 100% new, quality multiple checked before fulfilled
Unique-Bargains
10Pcs LOLIN32 V1.0.0 WiFi + bluetooth Module ESP-32 4MB FLASH Development Board Pin Soldered Version
Features: WIFIbluetooth4MB FlashLithium battery interface, 500mA Max charging currentPackage included: 10 x LOLIN32 board
Mimo Tech
2pcs MAX3232 RS232 Serial Port To TTL Converter Module DB9 Connector w cable
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer MPN: Does Not Apply Brand:
xfactory
SAMD21 M0 Module 32-bit ARM Cortex M0 Core Development Board for Arduino - products that work with official Arduino boards
Description: The SAMD21 & nbsp; M0 & nbsp; represents & nbsp; a & nbsp; powerful, & nbsp; 32-bit & nbsp; extension & nbsp; of & nbsp; the & nbsp; & nbsp; UNO & nbsp; platform. & nbsp; The & nbsp; board & nbsp; is & nbsp; powered & nbsp; by SAMD21 & nbsp; MCU, & nbsp; featuring & nbsp; a & nbsp; 32-bit & nbsp; ARM & nbsp; Cortex & nbsp; M0 & nbsp; core. Compatible & nbsp; with & nbsp; & nbsp; Zero & nbsp; and & nbsp; & nbsp; M0. The & nbsp; SAMD21 & nbsp; M0 & nbsp; board & nbsp; expands & nbsp; the & nbsp; family & nbsp; by & nbsp; providing & nbsp; increased & nbsp; performance, & nbsp; enabling & nbsp; a & nbsp; variety & nbsp; of & nbsp; project & nbsp; opportunities & nbsp; for & nbsp; devices, & nbsp; and & nbsp; acts & nbsp; as & nbsp; a & nbsp; great & nbsp; educational & nbsp; tool & nbsp; for & nbsp; learning & nbsp; about & nbsp; 32-bit & nbsp; application & nbsp; development. & nbsp; The & nbsp; Zero & nbsp; applications & nbsp; span & nbsp; from & nbsp; smart & nbsp; IoT & nbsp; devices, & nbsp; wearable & nbsp; technology, & nbsp; high tech & nbsp; automation, & nbsp; to & nbsp; crazy & nbsp; robotics. & nbsp; The & nbsp; board & nbsp; is & nbsp; powered & nbsp; by SAMD21 & nbsp; MCU, & nbsp; which & nbsp; features & nbsp; a & nbsp; 32-bit & nbsp; ARM & nbsp; Cortex M0+ & nbsp; core. & nbsp; One & nbsp; of & nbsp; its & nbsp; most & nbsp; important & nbsp; features & nbsp; is & nbsp; Atmel & rsquo; s & nbsp; Embedded & nbsp; Debugger & nbsp; (EDBG), & nbsp; which & nbsp; provides & nbsp; a & nbsp; full & nbsp; debug & nbsp; interface & nbsp; without & nbsp; the & nbsp; need & nbsp; for & nbsp; additional & nbsp; hardware, & nbsp; significantly & nbsp; increasing & nbsp; the & nbsp; ease-of-use & nbsp; for & nbsp; software & nbsp; debugging. & nbsp; EDBG & nbsp; also & nbsp; supports & nbsp; a & nbsp; virtual & nbsp; COM & nbsp; port & nbsp; that & nbsp; can & nbsp; be & nbsp; used & nbsp; for & nbsp; device & nbsp; and & nbsp; bootloader & nbsp; programming. & nbsp; Package included: 1 x SAMD21 M0 32-bit ARM Cortex M0 Core
Mimo Tech
5pcs JDY-31 DC 3.6-6V Bluetooth to Serial Adapter Module SPP Protocol Android Compatible with HC-05/06 JDY-30
User Manual: Click here to openDetails:; Click here to openProduct introduction:; JDY-31 Bluetooth is based on Bluetooth 3.0 SPP design, which can support Windows, Linux, android data transmission, working frequency 2.4GHZ, modulation mode GFSK, maximum transmission power 8db, maximum transmission distance 30 meters, support users to modify device name through AT command The baud rate and other instructions are convenient and quick to use.; Applications:; JDY-31 is a classic Bluetooth protocol that can communicate with Bluetooth-enabled computers (desktops, notebooks) and mobile phones (android). Can be applied? Windows computer Bluetooth serial port transparent transmission? Android Bluetooth serial port transparent transmission? Smart home control? Automotive ODB testing equipment? Bluetooth toy? Share mobile power, share weight? Medical equipmentModelJDY-31Working frequency 2.4GHZC ommunication InterfaceUART Operating VoltageSMD type: 1.8 - 3.6V ( 3.3V recommended) with backplane: 3.6 -6V (recommended 5V) Operating temperature-40 ° C - 80 ° CAntennaBuilt-in PCB antennaTransmission distance30 metersma-ster-slave supportSlaveModule size 19.6 * 14.94 * 1.8 mm (length, width, height)Bluetooth versionBluetooth 3.0 SPPSTM soldering temperature
Mimo Tech
Monoprice DB9 Female to RJ-12 Modular Adaptor
Features: DIY solution for using 6-pin RJ12 cables to extend your Serial (DB9) * connections. 6 conductors. *DB9 (common name) a. k. a DE9 (proper designation)
Monoprice Inc.
5pcs 5X IRLB3034PBF IRLB3034 HEXFET Power MOSFET TO-220 US SHIP
Restocking Fee: No All returns accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Brand: MPN: IRLB3034PBF
vestaxza
Back to Top