DC3.7V/5V/12V 315MHz Wide Voltage 2 Way Remote Control Switch For LED Light Bar Small Motor/Controller

Feature: Product
model: AK-WK02CAProduct
Name: Two
micro controllerWorking voltage: 3.7V -12V (minimum 4V required for jog mode)
Power consumption situation: Standby current is only 7MA, working
is 30MA currentCoding method: learn code pairing, can learn fixed code and learning code chip remote controlWorking frequency: 315MHzWorking
mode: Jog (default), self-locking, interlockingLoad
size: <= 1A (equipment within 12W for safe use)
Product size: 20 x 22 x 12mmHow to use: Learning
method and step description:; 1.
Jog mode: Hold down the learning button, press the button; once; when the indicator light, short press A button, the indicator light flashes twice, then short press B button, the indicator light flashes twice, it is “ jog mode' ' Learning success. 2.
Self-locking mode: Hold down the learning button,; press the button; once; when the indicator light, press and hold the A button until the indicator light flashes twice, then immediately press and hold the B button, the indicator light flashes twice, then the "self-locking mode" learning success. 3.
Interlock mode: Hold down the learning button,; press the button; twice; when the indicator light, then press the A button until the indicator flashes twice, then immediately press and hold the B button, and the indicator flashes twice. Mode "learning success.;
Code clearing method:; Press and hold the learning button for about 8 seconds. The indicator light turns on (blinks 3 times) to off, that is, the code is successfully cleared.
Tips: You must clear the code before you can switch to any work mode to learnPackage includes: 1 x Receiver board1 x Remote control;