Specifications:
Name: 3D printing touch moon light
Beam Angle: 360
Light Source: LED
Control Mode: Touch
Switch Type: tap the smart touch switch on bottom to change colors
Color Temperature: 4000K
Charging Mode: USB DC 2.5V
Battery: 500mAh lithium battery(built-in)
Input Voltage: 3.7V
Charging Time: 3 hours
Working Time: 8-10 hours (depends on brightness)
Materials: PLA plastic
Diameter of the Moon Light: 15cm/ 5.9 in
Operation:
1. Touch the metal dot at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal dot to adjust the brightness.
3. If your hand is too dry or the temperature is too low, the light may not respond.
4. The white light will not shine when power is low.
5. Insert the DC connector into the DC 2.5 charge port at the bottom of the moon lamp to charge, the red light is always on during the charging.
6. The blue light will turn on when fully charged.
Package Information:
Package Size: Approx. 17.5 15.5 15.5 cm / 6.9 6.1 6.1 in
Package Weight: Approx. 418g / 14.7 oz