note:
1. This is a pioneer brand product, only compatible with ps3
2. If you switch from the old controller, our new controller may be a bit "stiff" until you break it.
How to connect the controller to the console?
1. For the first time, you must use a USB cable to connect the controller and the console to match. Otherwise, wireless connection is not possible.
2. Please fully charge the controller before use.
3. Connect the cable, press and hold the P3 button, disconnect the cable for 3 seconds, and wait for one or two minutes.
How to open/close?
When you press the round button or connect the computer via the date cable, the controller will start. It will shut down 5 minutes after disconnection. If you cannot stop working after a long time, please insert the date in the computer and then pull it out so that it will shut down
How to charge?
(1) Connect to a computer without a driver, 4 lights will flash and go out after fully charged
(2) Connect with computer and driver, NO1 light will flash and go out when fully charged
(3) Please note: Do not use the mobile phone charger to charge, because the higher voltage of the mobile phone may damage the controller
How to connect wirelessly?
First, connect the cables. Second, pull out the cable and the controller will connect
If the controller is not charged or the synchronization fails, please reset the controller by pressing the small hole on the back of the controller with a pin or paperclip
packing list:
2 x wireless controller
2 x USB charging cable
1 x box