Twotrees 3D Printer FDM Sapphire Plus V1.1 CoreXY MKS TMC2225 Kits 3.5 Inch Touch Screen BMG Extruder and Suspended Filament Rack + free Test PLA Filament 11.81"(L)X11.81"(W)X13.78"(H) Printing Size

Sapphire plus V1.1 belongs to the corexy structure, which is characterized by fast running speed and stable structure, reaching a maximum running speed of 1000mm/s. The axis and Y axis adopt dual-track configuration, which makes the operation faster and more stable. The printing accuracy can reach 0.01mm. 310 * 310 high-power heating bed, the overall printing area of the machine can reach length: 300 * width 300 * height 350. The high-power power supply can increase the temperature of the extruder to 260°C, and can print various filaments, such as: plastic, wood, PETG nylon...the most consumable materials. The main board uses 5 TMC2225 drivers to control each motor separately to improve the stability of the motor. Using lattice glass on the hot bed can avoid unevenness of the aluminum substrate. Color touch screen, 3.5-inch color touch screen; support the use of automatic leveling. Equipped with a material interruption detection function, when we use the printer, if the material is almost used up, an alarm will sound. Remind us that we need to replace the new material to continue printing. It has a printing function after turning off the power: when our machine is in the printing process, the power is suddenly disconnected, don’t worry, we can plug in the power again, the machine has a storage function, it will remember the printing progress before turning off the power. Resume the original printing, and then continue the unfinished printing, so as not to waste materials, and there is no need to restart printing. Each machine is equipped with 0.4mm mk8 nozzle, spare nozzle and many gifts, including common tool kit, installation kit and 0.2kg filament.