Type |
HDMI |
Computer Connections |
HDMI |
Monitor Connections |
8 Ports |
Video Resolution |
4K@30HZ |
PC Selection |
Front panel buttons,Keyboard hotkeys,IR remote control |
This 8x1 HDMI KVM switch provides you with great flexibility in integrating cross-platform computer equipment easily. It makes you available to switch easily and reliably between any HDMI computers using one HDMI compliant display.
The 8 in 1 out HDMI KVM switcher supports USB 2.0 hub and USB 2.0 keyboard /mouse. By using USB 2.0 hub ports on the KVM, you can attach USB drive, printer, barcode scanner or other USB devices to the KVM. Switching can be controlled through variable methods, such as the front panel source selector buttons, RS232 commands, IP commands, IR signals and hotkeys on the keyboard.
With EDID emulator in every input port, keep PCs always have correct display information, to prevent display settings changed while switching input sources.
Features:
Using 1set of keyboard, mouse, and display to control up to 8 HDMI computers
Support Unix /Windows /Debian /Ubuntu /Fedora /Mac OS X /Raspbian /Ubuntu for Raspberry Pi and other Linux based system
With EDID emulator in every input port, keep PCs always have correct display information
Support hot plug, connect or disconnect devices to the KVM switch at any time without turning off devices
Support auto-switching to monitor computers in a specified time interval
Switching can be easy: support front panel buttons, IR remote control, keyboard hotkeys, RS232 serial commands or IP commands to control the KVM switch
Available to use the keyboard without any delay after switching input sources
Support resolution up to 3840*2160@30Hz
With extra standard USB 2.0 hub ports, it is possible to connect bar code scanner, USB hard driver or other USB devices to KVM just as you have plug these devices directly to the computer
Support DVI-D single link sources and displays with the use of HDMI-to-DVI adapters
Packing List
1* 8x1 HDMI Matrix
1* Remote control (without CR2025 battery)
1* DC 12V Power adapter
1* User manual
2* Rack-ears
1* IR recever cable
1* 3 Pins Connector ( For RS232 )
4* input cables for 4 PCs