LATNEX RFSG6-100K RF Explorer Signal Generator Combo High Frequency HF FM Modulation Radio Frequency Oscillator Source CW Sweep Tracking Generator 6GHZ (100KHz - 6000MHz)

LATNEX® RF Signal Generator RFSG6-100K is a major improvement over the standard Signal Generator RF-SG6. The new generator includes important functions requested by our most demanding customers. The new Expansion product includes harmonic filtering, high-performance amplifiers for higher output power, fine amplitude adjustment and support for frequencies as low as 100KHz covering up to 6GHz with no gaps. See below comparison of a 25MHz signal generated with new improved RFSG6-100K (in red) and a signal generated with standard unfiltered RF-SG6 (blue). The new RF-SG6 Expansion offers a perfect sinusoid filtered signal as opposed to the squarish unfiltered signal from RF-SG6. Specification: Frequency range supported: 100KHz to 6000 MHz Calibrated Amplitude range: -40 to +10dBm Uncalibrated extended Amplitude range: -60 to +18dBm Amplitude step/resolution: 0.25dB over calibrated range Amplitude accuracy (typical): +/-2dB in most frequency and power ranges Frequency step/resolution: 1KHz Frequency stability: 0.5ppm Temperature compensated (0-45C) Backlight for great indoor visibility and high contrast LCD for outdoor visibility Standard SMA 50 ohms connector Spurs: Internal fractional PLL configuration in some cases create spurs typically -50dBc or less. Harmonics: typical values range about -40dBc for 2nd harmonic, -50dBc for third and higher harmonics. Switch measurement point speed < 10ms Graphics LCD 128x64 pixels, great visibility outdoors PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits Functional modes: CW signal generator at any frequency in the range Tracking generator functionality working together with LATNEX Spectrum Analyzer when connected to the same PC Sweep generator between any to frequencies in the range, with selectable step size and speed CE / FCC / RoHS compliant