Specifications |
On-Levels: 32 locally, increments of 1% with software
Ramp Rates: 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely
LED Indicator: 9 White LEDs, one Red/Green Status LED
Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, INSTEON cleanup, X10
Multi-Way Circuit Support: One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers
Setup Memory: Non-volatile EEPROM
Paddle Type: True rocker action
Wire Nuts: 4 included
Voltage: 100VAC to 277VAC
Frequency: 50/60Hz auto-detected at power-up
Neutral Wire: Required
Maximum Amps: 5 amps
Ground Lead: 6", 18 AWG, stranded, bare copper
Maximum Load: 600 Watts (uses 12-Amp triac dimmer)
Standby power consumption: 0.59 Watts |