Get everything you need to start recording vocals in your studio with this specially priced bundle for the AT2020, which
also includes: (1) Pop Filter to filter out plosives while recording vocals or speech, and (1) 20 ft. Balanced XLR Microphone cable for connecting the microphone to a recording interface or mixer.
Reminder: This microphone is NOT equipped with USB and will require a microphone preamp with 48v Phantom Power. For the USB version of this mic, see the AT2020 USB.
AT2020 SPECIFICATIONS:
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTER: Cardioid
FREQUENCY RESPONSE: 20-20, 000
Hz OPEN CIRCUIT SENSITIVITY: 37 dB ( 14.1 mV) re 1V at 1
Pa* IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T. H. D.
NOISE (Typical): 20 dB
SPL DYNAMIC RANGE (Typical): 124 dB, 1 kHz at
Max SPL SIGNAL-TO-NOISE RATIO (Typical): 74 dB, 1 kHz at 1
Pa* PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
WEIGHT: 12.10 pz.
DIMENSIONS: 6.38" ( 162.0 mm) long, 2.05" ( 52.0 mm) maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type