Artillery Sidewinder X1 3D Printer 2020 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.4mm Direct Drive Extruder Filament Runout Detection and Recovery

Resume Print Function Resume printing from the last recorded extruder position after suffering unexpected power failure or filament outage. Filament Run Out Detection When the filament detector detects that filament runs out, the system automatically pauses printing and prompts for feeding. Professional Extruder Upgraded high precision extruder greatly reduces the risk of clogged nozzle and bad extrusion. Fast Heating The printing bed temperature reaches 80? in just 80 seconds, the nozzle heats up to 180? in just 1 minute High Precision Artillery Sidewinder X1 3D printer features a professional aluminum nozzle and a direct extruder with high accuracy, not easy to get blocked Ready to Print All you need to do is to check whether the printing bed is leveled. Loading the filament and inserting a micro SD card with preinstalled models to start your 3D printing journey. Low Power Consumption The power of Artillery Sidewinder X1 3D printer is lower than the standard 30W, more energy-saving to prevent global warming. Specification Configuration Layer Resolution: 0.1mm Frame: Aluminum Extrusion XYZ Positioning Accuracy: 0.05mm, 0.05mm,0.1mm Printing Filament: 1.75mm Nozzle Diameter: 0.4mm Machine Dimensions: 550*405*640mm/550*405*870(With Spool Holder) Shipping Box Dimensions: 780*540*250mm Machine Weight: 14kg Shipping Weight: 16.5kg Maximum Print Speed: 150mm/s Maximum Travel Speed: 250mm/s Build Volume: 300*300*400mm Extruder Type: Titan Extruder (Direct Drive) Specification Configuration Power Requirement: 110V 600W Max (With Heated Bed Turned on) Connectivity: USB, TF Card, USB Stick Control Board: MKS Gen L Nozzle Type: Volcano Maximum Build Plate Temperature: 130 Degree Celsius