Specification of ACASIS 4K60 HDMI PCI-E Capture Card:
1 channel HDMI video signal input and 1 channel HDMI video signal loop out
Support 2160P input video signal (compatible with resolution below 2160p)
PCIe 2.0 x 4 20 GB / s transmission bandwidth
DirectSound compatible with the audio acquisition, PCM 48K stereo
The video processing is completed by the capture card and does not occupy the CPU of the host computer
Support 1080i hardware de-interlacing
Support operating system: Windows XP/7/8.1/10 (32bit/64bit)
Installation steps:
Note:When devices are added to or removed from the system, ensure that the computer is turned off. If possible, disconnect all power cables from the computer before you add a device.
Insert the PCIe capture card into the PCIe-X4 Gen2 slot of your host computer (compatible with the interface above the PCIe-X4), and make sure it is firmly seated.
Connect the signal source (HDMI input interface device) to the PCIe card interface.
Reconnect all the power cables to start up the computer, then install the ACASIS PCIe card driver.