KVM Switches KVM with HDMI KVM Switch 2 Port 4K KVM Switch
Installation Step:
1. Turn off all devices;
2. Connect your computers to the KVM switch by USB cables and HDMI cables;
3. Plug the mouse and keyboard into mouse slot and keyboard slot;
4. Connect your Monitors to output port of the KVM switch;
5. Plug power adapter into the KVM switch and AC socket;
6. Boot your computers/laptops.
Package:
1 x HDMI 2.0 KVM switch
2 x HDMI cables
2 x USB cables
1 x DC 5V 2A Power adapter
1 x manual
Tips:
1. For Raspbian and Linux system, the mouse maybe be lag, you can make this operate: click the right [Ctrl] on the keyboard 2 times, then click [Z], at last click [Enter]. (whole operate time should not over 5s), can solve the issue.
2. For MAC system, mouse/keyboard maybe out of control, you can make this operate: click right [Ctrl] on the keyboard 2 times, then click [F2], at last click [Enter]. (whole operate time should not over 5s), can solve the issue.
3. For keyboard/mouse freeze, you can make this operate: click the right [Ctrl] on the keyboard 2 times, then click [ESC] 3 times, at last click [Enter]. (whole operate time should not over 5s), can solve the issue.
4. If no display, please try to press the push button about 3s, then the monitor resolution will be changed to 4K@30Hz. If press push button about 5s again, the monitor will return to 4K@60Hz.