VAC8010F Wireless Transmission Multi-function Instrument 2.4 inch LCD Voltage Current Capacity Energy Temperature Display with Power Off Memory Function

VAC8010F is a multi-function instrument based on 2.4 wireless data transmission technology, may display the voltage, current, power, capacity, energy, temperature, running time, and other physical parameters in real time, through the reserved two relay interfaces, battery charge and discharge management and overvoltage, undervoltage, and overcurrent protections can be achieved. And the instrument uses a 2.4 -inch color LCD as a display, the display data is more comprehensive, clearer and easier to
Features: Wireless transmission of data, avoids complicated interference between the display and detection module, and the wiring is more convenient. Using non-contact sensor detecting a current, without breaking the wire, safe, reliable, and convenient. Voltage, current, power, temperature, capacity, percentage of remaining capacity, simultaneously show running time. Two relay interfaces, to manage charge and discharge, respectively. With charge over voltage, under discharge voltage, charge over-current, discharge over-current protections. With power off memory function, the number of AH and WH before power off can be recorded.
Function introduction and setting: (1) NCP charge overcurrent protections value, if the value is >0, the protections will be started, if =0, the protections function will not be activated. (2) OCP discharge overcurrent protections value, if the value is >0, the protections will be started, if =0, the protections function will not be activated. (3) OVP charge overvoltage protections value, if the value is >0, the protections will be started, if =0, the protections function will not be activated. (4) LVP discharge undervoltage protections value,, if the value is >0, the protections will be started, if =0, the protections function will not be activated. (5) OUT output control, the yellow cursor moves to this position, click the OK button, you can turn on the relay, or switch the working status of the two relays. (6) LCK button lock control, move the cursor to this option, click the OK button to select this option. (7) BAT battery total capacity setting item, move the cursor to this option. (8) BPC battery remaining capacity setting, the remaining battery capacity can be estimated based on actual usage.

(9) CER current return function, if the actual current value is 0, and the instrument display value is not 0, move the cursor to this option and press OK briefly to clear the current. (10) RET data reset function, if you want to return to 0 watt hour and run the accumulated time value, move the cursor to this option, short press OK to 0 these two parameters. (11) LNG language switching function, the instrument parameters are preset with Chinese and English interfaces to choose from. (12) STI power-on default output state setting options on the relay. (13) SFH search device function, this feature can realize one-to-many communication. (14) DEL relay delay action time setting option. (15) FCH communication address setting function, this function can change the default communication address of the monitor and detection module. (16) SNR sets the current value setting option for the screen to go out. (17) SNT screen time setting option. (18) RFS color reversal function.
Specifications:
Name: Volt-ammeter
Material: ABS
Display: 2.4 inch TFT LCD display
Self-power measurement-range: 6V-80V
Measurement-range: 0-500V when external power supply
Input current measurement-range: 0-100A
External-supply voltage: 6-60V
Voltage: 0.01V -120V
Current: 0.1A -80A, 0.1A -100A, 0.1A -200A, 0.1A -300A, 0.1A -500A (optional)
Capacity: 0.001AH - 65000.00AH
Energy: 0.000KWH -9999KWH
Time: 0-100 hours
Power value: 999KW
Temperature: 1-100C
Voltage: 1% + 2 words
Current: 2% + 5 words
Temperature: 1.5 ?
Measurement rate: 5 times / second
Relay delay time: (0-60)S
Communication: open space transmission 10 meters
OVP (overvoltage- protections): 0.01V -500V
LVP (undervoltage-protections): 0.01 -500V
OCP (charge overcurrent-protections): 0-500A NCP (discharge o