Perfect Bond Silver Epoxy, For Electronic Modules, PCB, Integrated Circuits, Capacitors, Wave Guides & Flat Cables, Electrically Conductive Adhesive, 2 Part, 2924, 10gm

- PRODUCT DESCRIPTION: AA-DUCT 2924 is a two part electrically conductive composition developed for low shrinkage; low resistivity bonding applications where good electrical and physical properties over a wide temperature range (up to 190°C) are required. AA-DUCT 2924 is smooth paste formulation of refined pure silver and epoxy is free of solvents and copper or carbon additives. It can be used -- after REQUIRED high temperature cure cycle -- for the assembly, manufacture and repair of electronic modules, printed circuits, integrated circuits, electrical contacts, capacitors, wave guides and flat cables, for high-frequency RF shielding, and for applications where a "hot" soldering iron is impractical. When cured AA-DUCT 2924 is a hard, dimensionally stable, conductive material which is resistant to water, weathering, gases and vapors, lubricants, fuels, alcohol, and also to those salts, salt solutions, mild acids and alkalis, and other organic and inorganic compounds with which silver itself is compatible. - GENERAL PROPERTIES: Appearance: Silver Cure Type: Heat cure Benefits: + High strength + Perfect bond + Mix Ratio by weight: 100:5 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Operating Temperature: -60 to 190 °C Shelf Life: 1 Year - UNCURED PROPERTIES: Viscosity @ 25 °C cps: Paste Specific Gravity, mixed: 2.69 Reactive solids contents, %: 100 Pot Life: 3 hours - CURE SCHEDULE: 2 hours: @ 125 °C 4 hours: @ 100 °C - MISC PROPERTIES: Hardness, Shore D: 85 Adhesive bond strength: 1270 psi Volume Resistivity ohm-cm: < 0.003 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information.