Brand |
KanexPro |
Model |
EXT-HD100MHBT |
Resolution Support |
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 4K at 30Hz/ 60Hz |
Other Connector |
Interface:
Transmitter
Input: HDMI
Output: HDBaseT (Cat 5e/6)
Receiver
Input: HDBaseT (Cat 5e/6)
Output: HDMI |
Power Consumption |
9W (Maximum) |
Power Supply |
12V DC@2A |
Specification |
Video Amplifier Bandwidth: 10.2 Gbps all channel
Vertical Frequency Range: 50/60Hz
Computer Resolution: WUXGA (1920x1200)
Regulatory Approvals Converter: FCC, CE, UL
Regulatory Approvals Power Supply: FCC, CE, UL
Helpful Tips & Recommendations:
- CAT-5 cables should not exceed 330 feet or (100m).
- Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
- Shielded CAT5/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).
- Do not use crossover cables, patch cables or Ethernet couplers to extend two CAT5 cables. This may damage the Tx & Rx.
- If the power LED indicator on the Tx/Rx unit is not on, check to make sure that the CAT5 cables are not crossed i.e., Ethernet to Link instead of Ethernet to Ethernet. |
Feature |
Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable
Supports Power over Ethernet from Tx or Rx
Infrared Signal Input/Output, embedded over extension
Supports resolutions from 1080p/60@48bit
4K x 2K UHD resolutions
High bandwidth up to 10.2 Gbps
Enables 3D pass-through
Supports CEC pass-through
HDCP and EDID compliant
Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant
Uncompressed audio support such as LPCM
Front panel-LEDs for link activity and HDCP authentication
One external power supply included |
Dimensions |
3.93" x 2.50" x 1.00" |
Weight |
0.37 lb. |