High Strength Perfect Bond Cold Solder Epoxy Adhesive Glue Silver Filled For RMI EFI Shielding Electrically Conductive Long Pot Life Printed Circuit Board & Electronics Repair Kit 902LP, 10gm

- PRODUCT DESCRIPTION: AA-DUCT 902LP is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohm-cm. AA-DUCT 902LP is also characterized by a wide operating temperature range from –50 to +170°C. AA-DUCT 902LP is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties. - GENERAL PROPERTIES: Appearance: Silver Cure Type: Heat cure or Room temperature Benefits: • High strength • Perfect bond • Cold solder for heat sensitive components • Mix Ratio by weight 100/7 ( Resin/Hardener) Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Operating Temperature: -60 to 150 °C Typical Applications: Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair - UNCURED PROPERTIES: Viscosity At 25 °C cps Paste Specific Gravity, mixed 2.79 Reactive solids contents, % 100 Pot Life 3 hours - CURE SCHEDULE: 2 minutes At 120°C 5 minutes At 100°C 12 hours At 25°C - MISC PROPERTIES: Hardness, Shore D 83 Shrinkage linear in/in 0.003 Lap shear strength, psi 9600 Volume Resistivity: ohm cm > 0.0001 - GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). - AVAILABILITY: This epoxy can be supplied in various different packages. CALL (888) 522-6742 for more informations.