Brand |
APC |
Series |
Back-UPS |
Model |
BE850M2 |
International Version |
120V |
Input Voltage Range |
92 - 139V |
Input Frequency |
50/60 Hz +/- 3 Hz (auto sensing) |
Input Connection |
NEMA 5-15P |
VA Rating |
850 VA |
Watts |
450 Watts |
Output Voltage |
120V |
Output Frequency |
50/60 Hz +/- 3 Hz |
Outlets |
9 |
Outlet Type |
(3) NEMA 5-15R (Surge Protection)
(6) NEMA 5-15R (Battery Backup) |
Battery Run Time |
450W: 2m |
Battery Recharge Time |
8 hour(s) |
Battery Replaceable |
RBC17 |
Alarms |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Interface Port |
USB |
Surge Energy Rating |
354 Joules |
Features |
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS power conditions.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
USB connectivity
Provides management of the UPS via a USB port (not available on all models). |
Dimensions |
5.47" x 12.87" x 4.13" |
Weight |
9.04 lbs. |
APC Back-UPS ES 850VA, 2 USB charging ports, 120V Replaces BE750G