SECO-LARM Enforcer EV-DWSGQ Wall-Mount Bracket for EV-122C-DVB3Q - Gray
Handy wall bracket specifically designed for Seco-Larm dome cameras. Dark gray.
Seco-Larm Enforcer Xenon Strobe Light, 12VDC, Blue Lens (SL-126Q/B)
The Seco-Larm Strobe Light is ideal for "informative" general signaling requirements. It features an easy 2-wire installation, regardless of voltage. Also, if the strobe light is being powered by a battery, as the battery is drained the strobe light will continue to function. The Seco-Larm strobe light comes with a protective inner cover. This protects the high-voltage xenon tube when the colored lens has been removed. FEATURES: Incorrect polarity cannot damage circuit or draw current. Low current consumption with long operating lifespan of over 300 continuous hours (2, 000, 000 flashes). Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic. Use in temperature ranging from -22 to 140 degrees F (-30 to 60 degrees C). For 6- to 12-Volt use. SPECS: Circuits: All solid-state. Input Connections: Red/Positive Black/Ground. Leads: #18 Gauge. Electrical Protection: Reverse polarity protected. Operating Life: Over 2, 000, 000 flashes (300 hours continuous). Base: High-impact black ABS. Lens: High-impact resistant acrylic. LENS COLOR: Blue. Also known as -Seco-Larm Enforcer Xenon Strobe Light, 12VDC, Blue Lens-Seco Larm SESL126Qx-SESL126QB Enforcer Xenon Strobe Light 12VDC Blue Lens-Enforcer Xenon Strobe Light, 12VDC, Blue (SL-126Q-B)
Seco-Larm Enforcer Electric Door Strike, Fail-Secure (SK-990AQ)
The Seco-Larm ENFORCER Electric Door Strikes convert cylindrical locksets to an electronic access controlled locking system. They can be used on virtually any cylindrical door locking system. Use of a digital keypad ensures high security without the need for a key. Easily connects to SECO-LARM's SK-1011-SQ or SK-1311-SQ electronic keypads and is suitable for office-type applications. CE approved. TYPE: Fail-Secure, perfect for entrance door installations.
E-931ACC-RC1Q SECO-LARM,USA INC. 3" DIAMETER ROUND REFLECTOR
E-931ACC-RC1Q SL-E931ACC1Q SECO-LARM,USA INC. 3" DIAMETER ROUND REFLECTOR
Seco-Larm Enforcer LED Strobe Light with Built-In Programmable Siren, Amber (SL-1301-SAQ/A)
?Operating life over 50, 000 hours (over 5.7 years). ?Same size as the SL-126Q strobe light. ?Simple 2-wire installation. ?High-impact resistant case. ?High-impact and heat-resistant lens. ?Reverse polarity protection. ?Visible in all directions. ?5 lens colors available Amber, Blue, Green, Red and Clear. ?5 Vertical LED strips (32 LEDs) increase visibility from various directions. ?6 different flashing options. ?Adjustable flashing speed. ?Backup battery available for continuous lighting applications. ?10 Vertical LED strips (54 LEDs). ?Built-in 100dB siren (programmable). ?Replacement Lens Ordering Information ?Xenon strobe lights with UL available. ?SL-1301-EAQ/BAQ/SAQ - Comparison Chart.
SS-090-2H1 SECO-LARM,USA INC. ON/OFF LOCK #1301
The Seco-Larm SS-090-2H1 is a tubular lock key switch with SPST shunt on/off operation and key removable from the ON/OFF position. The unit uses the #1301 key. Also known as -Seco-Larm, Usa Inc. ON/ OFF LOCK #1301 - SL-SS0902H1
Seco-Larm Enforcer L Bracket for 600 Lbs. Maglock (E-941S-600/LQ)
These "L" brackets are for special mounting applications where space is insufficient for mounting the magnet. For use with the 600 Lb. magnetic door lock series.
Seco-Larm SD-862T-GWSQ
Seco-Larm SD-862T-GWSQ Wireless green 2" square "PUSH TO EXIT" button with built-in RF transmitter. Use with SECO-LARM 315MHz receivers. 9VDC Battery (included) operation with LED to indicate low battery. Place on desktop or mount on wall. English, Spanish, French, and blank message plates included.
SD-7201GCPE1Q SECO-LARM,USA INC. GRN MUSHROOM-CAP BTN.NO/NC CNT
The Seco Larm Enforcer Mushroom Button Push to Exit Plate has a stainless steel faceplate with Exit and Salida silk screened onto the plate. This unit fits into a standard single gang box, and features a green mushroom cap push button. NO/NC contact rated 5A at 125VAC.
Seco-Larm Enforcer Passive Ethernet Extender Over Coax (NE-SE01-020Q)
The ENFORCER Passive Ethernet Extender over Coax is designed to extend the range of any TCP/IP device beyond the 300ft (100m) limit of Ethernet. The unit does not filter out any protocols, codes, or applications, compatibility with any IP camera and its software. ?1 Channel Ethernet over coax ?10/100 Mbps Full duplex ?Transmission distance: ?Up to 650ft (200m) @10Mbps ?Up to 325ft (100m) @100Mbps ?Passive, no power required ?Built-in surge protection ?Fast and easy to install ?Bidirectional - can operate as transmitter and receiver ?Sold as a set
SECO-LARM Enforcer SM-217Q/W Miniature Surface-Mount Contact/Magnet
Use the N.O. wide-gap magnetic contacts for loose-fitting door and windows or other wide-gap applications are found.
SECO-LARM Enforcer 36 IR LED Indoor/Outdoor Vandal-Resistant Color Dome Camera,
This affordable outdoor dome camera is equipped with 24 IR LEDs that puts out an amazing 420 TV lines of resolution, even in low-light conditions up to 100 feet.
SD7101KBPE1Q SECO-LARM,USA INC. SD7101KBPE1Q-SLIMLINE FACE PLT
SD7101KBPE1Q SL-SD7101KBP SECO-LARM,USA INC. SD7101KBPE1Q-SLIMLINE FACE PLT
SECO-LARM Enforcer EV-DWLWQ Wall-Mount Bracket for EV-122C-DVHVQ - White
Handy wall bracket specifically designed for Seco-Larm dome cameras. White.
Seco-Larm SK-919TP2H-NUQ
The Seco-Larm Handheld Slimline RF Transmitters are compatible with all Seco-Larm Receivers (SK-910R, SK-910R2, SK-910R4) and operate up to 500 feet. They feature Seco-Larm & trade; s patented CodeBump technology and an LED transmission indicator. Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. The transmitters come with two 3VDC lithium batteries, a visor clip, and a belt clip. Features -Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. Gold-plated battery clips and contact points extend the life of the transmitter. -Magic LED Only appears when buttons are pressed. -Over 68 billion ( 6.8 x 1010) possible codes. -LED transmission indicator. -Code changes every time transmitter button is pressed. -Visor clip and belt clip included. Technical Details - MPN: SK-919TP2H-NUQ- UPC: 676544014041- Channel Type: 3-Channel-Includes two 3VDC lithium batteries. -Compatible with all Seco-Larm receivers (SK-910R, SK-910R2, SK-910R4). -Available with Seco-Larm & trade; s patented CodeBump technology. - Slim-line design: 3-1/2" x 2-3/16" x 1/2" (89 x 56 x 12 mm). -Operates up to 500 feet. -315 MHz. Also known as -Seco-Larm SK-919TP2H-NUQ
Seco-Larm SK-1123-SQ Weather-Resistant Illuminated Stand-Alone Keypad (1)
The Seco-Larm ENFORCER keypad is rugged, vandal-resistant, and weatherproof, making it ideal for indoor and outdoor applications. The keypad is illuminated and includes duress, quick code, wrong-code lockout, egress input, 3 LEDs, built-in buzzer, and back box (surface mount keypad). Supports up to 110 users. Suitable for flush-mount applications. Fits conveniently in back box. 2 Outputs: Main relay (Form C 5A at 30VDC); Auxiliary (Transistor ground 100mA AT 24VDC). Relay can be programmed for momentary (1 to 999 seconds) or latch. Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications. Code flexibility: Each code can be 4-8 digits long. Egress input for exiting the protected premises. Dual voltage: 12-24 VDC/VAC operation. Tamper switch: N.C. dry contact 3A at 12VDC. Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time. All features are programmed directly from the keypad, eliminating the need for an external programmer. Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress. Door-forced-open and door-propped-open alarm output. Door-hold-open mode available. Keypad can be programmed to emit beeps for key presses or operate in silent mode. Auto or manual code entry checking: Auto: No # key required after each code; Manual: # key must be pressed after every code. MOUNT: Surface.UPC:013555014101SKU:ADIB004HNBN1G
Seco-Larm Enforcer Power Distribution Board, 9-Outputs (PD-9PSQ)
The Seco-Larm Enforcer Power Distribution Board offers individually fused PTC-type (Positive Temperature Coefficient) outputs, allowing you to power multiple devices (such as CCTV cameras) with separate fusing for each. This provides a simple way to isolate any problems and ensure reliable power for the bulk of your system. The main power switch even has built-in surge protection to provide further protection against outages. The power distribution board includes a master input fuse, a backup fuse, and four outputs. Each output has an individual red LED status indicator to show you which device needs attention in case of a power problem.
PR-K1K1-AQ SECO-LARM,USA INC. PROXIMITY KEYFOBS F/PROX.READR
PR-K1K1-AQ SL-PRK1K1AQ SECO-LARM,USA INC. PROXIMITY KEYFOBS F/PROX.READR
Seco-Larm MVS-AH41-01NQ
Seco-Larm MVS-AH41-01NQ HDMI Switch. Switch between any of four HDMI sources with included remote control or pushbutton. Resolution up to 1080p. Includes 5VDC power supply and IR remote.
EB-P501-02Q SECO-LARM,USA INC. ELITE PASSIVE VIDEO BALUN/GOLD
EB-P501-02Q SL-EBP50102Q SECO-LARM,USA INC. ELITE PASSIVE VIDEO BALUN/GOLD
SECO-LARM SM-216Q/BR Wide Gap Magnetic Contact, Brown
The SECO-LARM Wide Gap Magnetic Contact is a 2 ? & quot; magnet for N.C. circuits, with screw terminals for easy installation.
Seco-Larm Enforcer Overhead Door Magnetic Contact, Open/Closed Loop (SM-226L-3Q)
The Seco-Larm Enforcer Overhead Door-Mount Magnetic Contact, NO/NC is a contact switch designed for large doors and gates where regular contacts may be difficult to mount. The contact’s large gap allows use with even the largest doors, such as garage doors. The switch is contained in low-profile cast aluminum housing, and curved so that heavy vehicles can cross over without damaging it. - NO/NC contact switch - Use on large doors or gates - Magnet in gray ABS case mounted on L-shaped bracket - 24-inch wire leads enclosed in stainless-steel cable Rugged, Long-Lasting Construction Seco-Larm contacts have a unique rhodium plating which has gone through a special oxygen treatment to deactivate the surface, thus eliminating the absorption of organic impurities, polymer growth during operation, and the possibility of contact freezing. The switch is housed in weatherproof die-cast aluminum constructed for surface-mounting on a garage floor. It can withstand heavy vehicle pressure without damage. The switch is safely enclosed in an epoxy compound, and a 24-inch flexible stainless-steel cable gives complete protection to the switch wiring. The magnet is housed in a high-impact weatherproof ABS plastic case and can be mounted on a garage door with an "L"-shaped bracket, which minimizes the effect of steel doors on magnets. Technical Details - MPN: SM-226L-3Q - UPC: 676544006473 - Alarm circuit: Three-wire N. O. /N. C. Contact for either closed or open circuit alarm systems - Reed switch: Gold under-plating with deactivated rhodium outer-plating - Switch housing: Weatherproof die-cast aluminum - Magnet: Extra-strength Alnico 5 - Wire: 24 inches (61 cm), stainless-steel enclosure - Contact lifetime: 50 million cycles - Rating: 0.02A mp. /100VDC (max. ), 0.2A mp. /10VDC (max. ), 3W (max. ) - Temperature: -15 to 160 °F (-25 to 70 °C) - Dimensions: 4-3/8 x 1-3/4 x 7/16 inches (111 x 44 x 11 mm) - Gap: 2-3/4 inches (70 mm) - Listings: UL, RoHS
Seco-larm SL-1301-EAQ/B
Seco-larm SL-1301-EAQ/B 6~12 VDC LED Strobe Light. Incorporates 12 LEDs. 50,000-Hour operating life. Flash only. Indoor/outdoor use. Blue lens.
Seco-Larm Enforcer Electromagnetic Lock, Bond Sensor, 1,200 Lbs. (E-941SA-1K2PQ)
The Seco-Larm Enforcer Electromagnetic Lock with Bond Sensor is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door. Once the electromagnet is deactivated, the secured door will function normally without any residual magnetism. FEATURES: Anodized aluminum. No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. "L" bracket and "Z" brackets available for easy mounting. 12/24VDC selectable. Detachable faceplate. Built-in dual-color status LED and bond sensor to show locking status: Green: Door is closed and locked, Red: Door not closed and/or locked, Off: Door in use/no power. Bond sensor output: 3A at 12VDC.
Seco-Larm Enforcer Piezoelectric Request-to-Exit Plate (SD-6276-SS1Q)
PIEZOELECTRIC PSH BTN VANDAL-RSTNT, SNGL GANG PLATE
SECO-LARM E-941S300R/LQ L Mounting Bracket for E-941SA-300RQ
E-941S300R/LQ
Seco-Larm SM-4201-LQ Enforcer Track-Mount Overhead Door Magnetic Contact Switch
NC MAG CONTCT INDUSTRL TRACKMNT WIDEGAP W/LEADALU
SS-090-2H2 SECO-LARM,USA INC. ON/OFF LOCK #1302
The Seco-Larm SS-090-2H2 is a tubular lock key switch with SPST shunt on/off operation and key removable from the ON/OFF position. The unit uses the #1302 key.
SECO-LARM E-941S300R/ZQ Z Mounting Bracket for E-941SA-300RQ
E-941S300R/ZQ
Seco-Larm SD-6176-SSVQ
Seco-Larm SD-6176-SSVQ Piezoelectric pushbutton. Vandal-resistant, slimline plate, mechanical override button. "PUSH TO EXIT" and "Manual Override" printed on plate. Programmable illumination surrounding the button: red or green.
SK-919TP2H-NUQ SECO-LARM,USA INC. 2 BUTTON RF TRANSMTR
The Seco-Larm Handheld Slimline RF Transmitters are compatible with all Seco-Larm Receivers (SK-910R, SK-910R2, SK-910R4) and operate up to 500 feet. They feature Seco-Larm & trade; s patented CodeBump technology and an LED transmission indicator. Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. The transmitters come with two 3VDC lithium batteries, a visor clip, and a belt clip. Features -Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. Gold-plated battery clips and contact points extend the life of the transmitter. -Magic LED Only appears when buttons are pressed. -Over 68 billion ( 6.8 x 1010) possible codes. -LED transmission indicator. -Code changes every time transmitter button is pressed. -Visor clip and belt clip included. Technical Details - MPN: SK-919TP2H-NUQ- UPC: 676544014041- Channel Type: 3-Channel-Includes two 3VDC lithium batteries. -Compatible with all Seco-Larm receivers (SK-910R, SK-910R2, SK-910R4). -Available with Seco-Larm & trade; s patented CodeBump technology. - Slim-line design: 3-1/2" x 2-3/16" x 1/2" (89 x 56 x 12 mm). -Operates up to 500 feet. -315 MHz. Also known as -Seco-Larm SK-919TP2H-NUQ
SR-1212-C2ALQ SECO-LARM,USA INC. RELAY BOARD
SR-1212-C2ALQ SL-SR1212C2L SECO-LARM,USA INC. RELAY BOARD
Seco-Larm E-931-S35RRQ Enforcer Wall Mounted Photoelectric Beam Sensor with 35ft
SECO LARM E 931 S35RRQ NIR Reflective Photoelectric Sensor For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size SECO LARM E 931 S35RRQ NIR Reflective Photoelectric Sensor For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size Key Features For outdoors gates, garage doors, etc Weatherproof IP66 construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size 12~240VDC / 24~240VAC Operation Current: Up to 40mA@12VDC Bracket and mountinghardware Included Pre wired 6ft 1.8 m cord New single gang box and wall mount brackets available Specifications Sensing Range: 0.5 to 35 0.1 11m Current Draw: Standby 12VDC@20mA 24VDC@10mA, Active 12VDC@40mA 24VDC@20mA Operating Voltage: 12~240VDC or 24~240VAC Response Time: 10ms Max Light Source: IR LED LEDs Red: Active LEDs Yellow: Standby Output: SPDT Relay Output Switching Capacity: 250VAC/1A, 30VDC/2A Enclosure: IP66 Waterproof Operating Temperature: 4 ~131 F 20 ~55 C
Seco-Larm E-931ACC-BLS8Q
Seco-Larm E-931ACC-BLS8Q Wall/door frame bracket for the E-931CS22RFCQ, E-931CS22RRCQ, E-931-S35RRQ and E-931-S45RRQ.
seco-larm enforcer access control keypad with proximity reader, backlit (sk-1131-spq)
With beauty and brains, the Seco-Larm Enforcer Access Control Keypad (Indoor with Proximity Reader) is a versatile keypad and card reader that looks good and works well anywhere indoors. The backlit keypad glows soft blue and its stainless steel faceplate makes for a sleek, classy trim around the edges. The built-in proximity card reader works with any Seco-Larm 125kHz proximity cards or tags (sold separately). The keypad features two 1-Amp relay outputs, plus a transistor ground output, giving you the flexibility to wire into any nearly access control device. With three outputs, the keypad can be programmed for up to 1,200 users total -- 1,000 for the primary output, and 100 for each of the other two outputs. Authorized users can be easily added and deleted, allowing you to provide temporary access to guests. FEATURES: 4 programmable access modes for all 3 outputs: Card only, Code only, Card and common user code, Card and unique user code. Optional door open alarm. Trigger auto-lockout or duress output after 5-10 unsuccessful attempts. Duress Output: Signals a silent alarm if an authorized user is forced to open the door under duress. Alarm Output: Triggers an optional alarm control panel if door is forced open. Keypad Active Output: Activates for 10 seconds when any key on the keypad is pressed to trigger a DVR, turn on a light, etc. Egress Input: Lets users exit without using a code/card. Mantrap: For a protected area with two doors, this feature allows only one door to be open at a time. The keypad supports 12-24V AC/DC universal power, eliminating the need for special programming or jumpers. It wires into a power supply (sold separately) and mounts to the wall with the included screws and back box. In case of a power outage, all your data is stored and reliably retained in the keypad's non-volatile EEPROM memory. CONTENTS: Keypad, Back Box, (4) Screws, Diode, Manual. NOTE: Install indoors only; not for outdoor use. Proximity cards/tags are sold separately.
Seco-Larm Enforcer No Touch Request-to-Exit Sensor, White (SD-927PWCQ)
The ENFORCER "No Touch" Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this sensor is ideal for use in hospitals, clinics, labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices. Sensing range up to 2 inches (5 cm). Reliable IR technology senses motion. No touch reduces the risk of cross-contamination. White plastic single-gang plate. 3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor. LED illuminated sensor area for easy identification. LED changes color to show the relay is triggered. Quick-connect screwless terminal block.
Seco-Larm Enforcer Electromagnetic Lock, Bond Sensor, 600 Lbs. (E-941SA-600PQ)
Prevent unauthorized visitors from gaining entry to your home or business. The SECO LARM E 941SA 600PQ 600 Pound Electromagnetic Lock mag lock with Bond Sensor was designed for outdoor use to keep sliding and swinging electric gates securely closed. It has 600 pounds of holding force, when power is applied to the magnetic lock it turns on the unit s powerful built in electromagnet. The lock can be triggered by your security system, relay switch, or even with a standalone RF transmitter and receiver system each sold separately. The built in Bond Sensor and dual color LED show the lock status Green: Door is closed and locked, Red: Door not closed and / or locked, off: Door in use / no power.
Seco-larm MVD-AH18-01Q
Seco-larm MVD-AH18-01Q HDMI Splitter. Transmit a single HDMI source to up to eight different high-definition TVs or HDMI displays. Supports up to 1080p resolution and 3D video. Includes 5VDC power supply.
EB-P101-20Q SECO-LARM,USA INC. VIDEO BALUN 6" PIGTAIL SILVER
EB-P101-20Q SL-EBP10120Q SECO-LARM,USA INC. VIDEO BALUN 6" PIGTAIL SILVER
Seco-Larm Enforcer Extra Vibrating Receiver for E-37EV (E-37RV)
You can allow more than one person to receive alerts from your Seco-Larm Enforcer 3-Zone Alarm Pager System by adding the Seco-Larm Enforcer Extra Vibrating Receiver for E-37EV. This extra receiver works just like the original receiver to provide vibrating and audible alerts when your security system is triggered. Up to three receivers can be used with one transmitter. - Belt-clip receiver vibrates and sounds audible alarm - Color LEDs indicate which zone was activated - Stores the last six pages for easy recall - Low battery and unattended page indicators As a code-learning receiver, the vibrating pager can be programmed to receive signals from up to three different transmitters, allowing you to monitor up to three zones within a half mile of the receiver. Additionally, each transmitter can signal an unlimited number of receivers, so multiple users can receive alerts. More than two million possible coding combinations help ensure that the system cannot be tampered with by unauthorized users. Backup Memory Designed for reliable, continuous operation, the receiver features EEPROM memory that stores transmitter codes for up to one year without power. The battery-powered receiver also has a low battery indicator to alert you when the batteries need to be replaced. NOTE: Batteries not included. Technical Details MPN: E-37RV UPC: 676544013464 Number of Codes: Learns up to 3 transmitter codes Power: 3VDC (2 AAA alkaline batteries, not included) Battery Life: Approx. 1 month Current Drain: - Standby: 1mA - Active (Beep): 20mA - Active (Vibrate): 50mA Dimensions: 3 x 2-1/8 x 5/8 inches (76 x 54 x 16 mm) Weight: 1.6 ounces (45g) (without battery)
DR-116Q SECO-LARM,USA INC. 16-CHANNEL H.264 NETWORK DVR
DR-116Q SL-DR116Q SECO-LARM, USA INC. 16-CHANNEL H. 264 NETWORK DVR
Seco-Larm VG-1C12YQ
Seco-Larm VG-1C12YQ 4-in-1 Ground Loop Isolator, Compatible with TVI, CVI, AHD, and Analog signals, reduces ground loop interference, built-in surge protection, BNC terminals, passive operation
E-9679-8B190Q SECO-LARM,USA INC. LONG RANGE BARRIER SENSOR 8PR
E-9679-8B190Q SL-E96798B19 SECO-LARM,USA INC. LONG RANGE BARRIER SENSOR 8PR
Seco-Larm Enforcer Magnetic Contact, Surface Mount, 1 In. Gap, White
Seco-larm SM-431-TQ/W Surface-Mount N.C. Magnetic Contact with quick-connect terminal block. 1" Gap. UL, CUL Listed. White. Sold in multiples of 10 pc. (price is for 1 pc.)UPC:676544006541SKU:ADIB007J98HDC
VD10BNA SECO-LARM,USA INC. DUMMY BOX CAM W/DUMMY LENS ASB
VD10BNA SL-VD10BNA SECO-LARM,USA INC. DUMMY BOX CAM W/DUMMY LENS ASB
Seco-Larm SL-1312-SA/B
Seco-Larm SL-1312-SA/B 6~15 VDC Mini Strobe Siren. Mounts in single-gang box or surface-mount. Weatherproof, Indoor/outdoor use. Blue Lens. Minimum order quantity of 10pcs.
Seco-Larm Enforcer LED Strobe Light, Blue Lens (SL-1301-BAQ/B)
The Seco Larm LED Strobe Light is designed for use as an emergency strobe or continuous warning indicator. The light is low maintenance with an operating life of over 50, 000 hours 5.7 years. It is rated at IP66 for indoor or outdoor use. FEATURES: LED strobes feature a longer life with less heat generated. 20/40 LEDs function even if individual LEDs burn out. Programmable for flashing strobe or rotating beacon mode. Weatherproof for indoor or outdoor use. Omni directional visible in all directions. 9 Volt backup battery option for continuous operation. COLOR: Blue.
Seco Larm SESTUV12SxxQ-SESTUV12S20Q Enforcer Power Supply, 12VDC, Regulated, 2 A
SECO-LARM 12VDC Switching Power Supplies convert AC input power to low-voltage DC output power. They are used in a variety of security, access control, CCTV and many other applications. The power supply features low power consumption and a sideways plug for ease of use on power strips. Universal 100-240VAC input. Regulated 12VDC output. 6-Foot cord 2.1 mm plug (positive center). Also known as -Seco Larm SESTUV12SxxQ-SESTUV12S20Q Enforcer Power Supply 12VDC Regulated 2 Amp-Seco-Larm Enforcer Power Supply, 12VDC, Regulated, 2 Amp Output
Seco-Larm Enforcer Xenon Strobe Light, 24VDC, Green Lens (SL-126-A24Q/G)
The Seco-Larm Enforcer Xenon Strobe Light, 24VDC is designed for informative signaling requirements, such as a home security system alert. The light's powerful xenon tube extends flash visibility for enhanced reliability. The strobe light also comes with an inner cover that protects the high-voltage xenon tube when the colored lens has been removed. Highly Reliable for Your Protection If the strobe light is being powered by a backup battery, as the battery is drained, the strobe light will continue to function. Additionally, incorrect polarity cannot damage the circuit or draw current.
Seco-larm SM-4601-L3Q
Seco-larm SM-4601-L3Q Industrial Wide-Gap N.O/N.C Magnetic Contact. Weatherproof rugged aluminum housing with 36" leads enclosed in armored cable. 3" Gap. Minimum order quantity of 5pcs.
SECO-LARM,USA INC. SD-997B-GBQ ELCTRC DEADBOLT,F/SAFE,12/24VD
ELCTRC DEADBOLT,F/SAFE,12/24VD
SS-090KN-2 SECO-LARM,USA INC. ADDITIONAL KEYS #1302
The Seco-Larm SS-090KN-2 is an extra key (key# 1302) for the SS-090 tubular key lock switches. Also known as -Seco-Larm, Usa Inc. ADDITIONAL KEYS #1302 - SL-SS090KN2
Seco-Larm Enforcer Xenon Strobe Light, 24VDC, Blue Lens - SL-126-A24Q/B
The Seco-Larm Enforcer Xenon Strobe Light, 24VDC is designed for informative signaling requirements, such as a home security system alert. The lights powerful xenon tube extends flash visibility for enhanced reliability. The strobe light also comes with an inner cover that protects the high-voltage xenon tube when the colored lens has been removed. Highly Reliable for Your Protection If the strobe light is being powered by a backup battery, as the battery is drained, the strobe light will continue to function. Additionally, incorrect polarity cannot damage the circuit or draw current. Also known as -Seco-Larm Enforcer Xenon Strobe Light, 24VDC, Blue Lens-Seco-Larm, Usa Inc. 6-24VDC (2WIRE CNNCTN) STRB LGH - SL-SL126A24B
Seco-Larm SD-995C-D3Q (One Pack)
Seco-Larm SD-995C-D3Q No Cut Door Strike, Field-selectable for Fail Safe or Fail-secure Operation, 1500 lbs. (680Kg) Static Strength, Suitable for Office-type Applications, Non-polarized Connection The SECO-LARM Electric Door Strike can be used to convert cylindrical lock sets into an electronic access controlled locking system. Combine with an optional SECO-LARM digital keypad for keyless high security. Key Features Field-selectable for fail safe or fail-secure operation Can be used with virtually any cylindrical door locking system Can use with an optional digital keypad Suitable for office-type applications Reversible non-handed design fits either right hand or left-handed doors Shallow design for use with most metal doors Powered by a solenoid, not a buzzer coil Static strength – 1, 500 lbs. (680Kg) Stainless-steel keeper for strength and long life Non-polarized connection Tested to 100, 000 cycles (UL Tested) No horizontal or vertical adjustment Specifications Operating Voltage: 12/24 VDC Operation: Fail-secure or Fail-safe Current Draw: 300mA@12VDC, 150nA@24VDC Static Strength: 1, 500 lbs. (680kg) Dynamic strength: 70-ft-lbs. ( 9.68 m-kgs) Operating Temperature: 32°F~120°F (0°~49°C) Dimensions: 4-7/8"x1-1/4"x1-1/16" (124x32x 27.5 mm)
SECO-LARM,USA INC. SD-997B-1SQ MINIATURE ELECTRIC DEADBOLT
MINIATURE ELECTRIC DEADBOLT
SECO-LARM - E941SA1200 - Seco-Larm E-941SA-1200 Magnetic Lock
Product Overview Water resistant and vandal resistant stainless steel finish. Ideal for all indoor and outdoor applications, even in severe weather. Maintenance free, factory sealed design. Brackets and spacers are available to make installations easier. Holding force: 1200 lbs. Power: 12VDC, 250mA Ground ship only Package Contents: E-941SA-1200 Magnetic Lock Mounting Hardware Product Type: Magnetic Lock Product Type: Magnetic Lock Manufacturer Part Number: E941SA1200 Weight (Approximate): 11.02 lb Color: Aluminum Color: Aluminum Manufacturer: SECO-LARM U. S. A., Inc Product Model: E-941SA-1200 Product Name: E-941SA-1200 Magnetic Lock Brand Name: Seco-Larm Brand Name: Seco-Larm Lock Height: 10.55 Lock Width: 1.65 Lock Depth: 2.64
Seco-Larm VC-3YAQ
Seco-Larm VC-3YAQ 4-in-1 HD to HDMI Converter, converts HD-TVI, CVI, AHD and CVBS video to HDMI, VGA, or composite outputs, built-in OSD to display input/output settings, local loop output, picture-in-picture display
Seco-Larm SM-226R-3Q
Seco-Larm SM-226R-3Q Overhead Door-Mount N.O/N.C. Magnetic Contact. Magnet mounted on "L" Bracket, contact in die-cast aluminum housing with pre-wired 24" leads, flexible stainless-steel cable. 23/4" Gap. Magnet enclosed in metal round-backed bracket.
Seco-Larm Enforcer Access Control Keypad, Outdoor, Sealed/Weatherproof
The Seco-Larm Weatherproof Outdoor Digital Access Keypad is standalone. All keypad features are programmed directly from the keypad and it is able to mount to a single-gang back box. It is designed with backlit keys for easy night time use. FEATURES: Two multi-colored status LEDs. All features are programmed directly from the keypad - no need for an external programmer. EEPROM memory protects programmed information in case of power loss. Optical tamper for added security. Circuitry is potted with epoxy for outdoor use. IP65 weatherproof rating, rugged aluminum construction. 12-15 VDC operation. 1, 010 Users (Output # 1: 1, 000 users, Output # 2: 10 users). 2 Form C relays, each rated 1 Amp at 30VDC. Each relay has programmable output time from 1-99 seconds or toggle. Output #2 can be programmed for use with a doorbell. 2 Egress inputs and 1 door sensor input. Also known as -Seco-Larm Enforcer Access Control Keypad, Outdoor, Sealed/Weatherproof
SS-095-1H0 SECO-LARM,USA INC. MOMENTARY LOCK #1300
The Seco-Larm SS-095-1H0 is a tubular key lock switch with two terminals (momentary ON and shunt OFF). The key (#1300) can be removed only when the switch is in the off position. Also known as -Seco-Larm, Usa Inc. MOMENTARY LOCK #1300 - SL-SS0951H0
