Owon SDS1022 Oscilloscope Oscillometer Digital Storage Oscilloscope 2CH 20MHz 100MS/s 7" LCD Display
Features: 20MHz bandwidth. 100MS/s sample rate. Time base range: 5ns/div~100s/div. Rise time: 17.5 ns 2 channels. 7.0 -inch high resolution LCD display. Support for SCPI and LabVIEW. Specifications: Functions Specifications of SDS1022 Bandwidth 20MHz Sample Rate 100MS/s Horizontal Scale(s/div) 5ns/div - 100s/div, step by 1-2-5 Rise Time (at input, typical) 17.5 ns Channel 2 Display 7 color LCD, 800 480 pixels Input Impedance 1MO 2%, in parallel with 20pF 5pF Channel Isolation 50Hz: 100:1, 10MHz: 40:1 Max Input Voltage 400V (PK-PK) (DC+AC, PK-PK) DC Gain Accuracy 3% Record Length 10k DC Accuracy (average) Average16: (3% reading+ 0.05 div) for ?V Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) 10Hz (at input, AC coupling, -3dB) Sample Rate / Relay Time Accuracy 100ppm Interpolation sin (x) / x Interval(?T) Accuracy (full bandwidth) Single: (1 interval time + 100ppm reading + 0.6 ns), Average>16: (1 interval time + 100ppm reading + 0.4 ns) Input Coupling DC, AC, and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously ) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Trigger Level 5 divisions from screen center Line / Field Frequency (video) NTSC, PAL and SECAM standard Cursor Measurement ?V, and ?T between cursors Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay AB, Delay AB Waveform Math +, -,,, invert, FFT Waveform Storage 16 waveforms Lissajous Figure Bandwidth full bandwidth Lissajous Figure Phase Difference 3 degrees Communication Interface USB host, USB device Frequency Counter available Power Consumption
Owon SDS1022 Oscilloscope Oscillometer Digital Storage Oscilloscope 2CH 20MHz 100MS/s 7" LCD Display
Features: 20MHz bandwidth. 100MS/s sample rate. Time base range: 5ns/div~100s/div. Rise time: 17.5 ns 2 channels. 7.0 -inch high resolution LCD display. Support for SCPI and LabVIEW. Specifications: Functions Specifications of SDS1022 Bandwidth 20MHz Sample Rate 100MS/s Horizontal Scale(s/div) 5ns/div - 100s/div, step by 1-2-5 Rise Time (at input, typical) 17.5 ns Channel 2 Display 7 color LCD, 800 480 pixels Input Impedance 1MO 2%, in parallel with 20pF 5pF Channel Isolation 50Hz: 100:1, 10MHz: 40:1 Max Input Voltage 400V (PK-PK) (DC+AC, PK-PK) DC Gain Accuracy 3% Record Length 10k DC Accuracy (average) Average16: (3% reading+ 0.05 div) for ?V Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) 10Hz (at input, AC coupling, -3dB) Sample Rate / Relay Time Accuracy 100ppm Interpolation sin (x) / x Interval(?T) Accuracy (full bandwidth) Single: (1 interval time + 100ppm reading + 0.6 ns), Average>16: (1 interval time + 100ppm reading + 0.4 ns) Input Coupling DC, AC, and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously ) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Trigger Level 5 divisions from screen center Line / Field Frequency (video) NTSC, PAL and SECAM standard Cursor Measurement ?V, and ?T between cursors Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay AB, Delay AB Waveform Math +, -,,, invert, FFT Waveform Storage 16 waveforms Lissajous Figure Bandwidth full bandwidth Lissajous Figure Phase Difference 3 degrees Communication Interface USB host, USB device Frequency Counter available Power Consumption
Owon SDS1102 Oscilloscope Oscillometer Digital Storage Oscilloscope 2CH 100MHz 1GS/s 7-inch LCD Display
Features: 100MHz bandwidth. 1GS/s sample rate. Time base range: 2ns/div~100s/div. 3.5 ns rise time. 2 channels. 7.0 -inch high resolution LCD display. Support for SCPI and LabVIEW. Specifications: Functions Specifications of SDS1102 Bandwidth 100MHz Sample Rate 1GS/s Horizontal Scale(s/div) 2ns/div - 100s/div, step by 1-2-5 Rise Time (at input, typical) 3.5 ns Channel 2 Display 7 color LCD, 800 480 pixels Input Impedance 1MO 2%, in parallel with 20pF 5pF Channel Isolation 50Hz: 100:1, 10MHz: 40:1 Max Input Voltage 400V (PK-PK) (DC+AC, PK-PK) DC Gain Accuracy 3% Record Length 10k DC Accuracy (average) Average16: (3% reading+ 0.05 div) for ?V Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) 10Hz (at input, AC coupling, -3dB) Sample Rate / Relay Time Accuracy 100ppm Interpolation sin (x) / x Interval(?T) Accuracy (full bandwidth) Single: (1 interval time + 100ppm reading + 0.6 ns), Average>16: (1 interval time + 100ppm reading + 0.4 ns) Input Coupling DC, AC, and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously ) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Trigger Level 5 divisions from screen center Line / Field Frequency (video) NTSC, PAL and SECAM standard Cursor Measurement ?V, and ?T between cursors Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay AB, Delay AB Waveform Math +, -,,, invert, FFT Waveform Storage 16 waveforms Lissajous Figure Bandwidth full bandwidth Lissajous Figure Phase Difference 3 degrees Communication Interface USB host, USB device Frequency Counter available Power Consumption
Owon SDS1104 4-CH Digital Storage Oscilloscope with 7-inch LCD Display Handheld Portable Oscillometer 100MHz 1GS/s AU Plug
With the characteristics of 100MHz band width, 1GS/s sampling rate and 2 types of trigger mode, this fine-quality oscilloscope features complete functions, convenient operation, long service life and high cost performance. It can transform the invisible electric signals into visible images, which is convenient for people to study the changing process of various electrical phenomena, which is widely used in communication, embedded systems, computer, research, education and other industries and fields. Features: [Humanized Design] Foot stool with adjustable tilt angle; hidden handle. [TFT LCD Screen] 7-inch color TFT LCD screen, 800*480 pixels high resolution, 65536 display colors. [4 Channels] Each channel is equipped with an independent knob to control. [Front USB Port] Support U disk storage. [Trigger Control] The oscilloscope provides two trigger types: single trigger and alternate trigger. Each type of trigger owns different sub menus. [One-click Measurement] With built-in 39 types of auto measurement, it display all the measurement values in one-click, much more convenient and efficient to view the waveform information. [Auto Cursor Function] Quickly measure the difference between two points of the waveform, helping engineers analyze the real-time measurement waveform. [Waveform Zoom Function] The upper part is the main window, which displays the complete waveform, and the lower part is the enlarged area, which helps to observe more waveform details and makes it easier to read parameter data. [FFT Spectrum Analysis Function] Provide FFT rms function, supporting Hamming, Hanning, Blackman, Rectangle, Kaiser and Bartlett. [Waveform Math Function] Contains +, -, *, /, FFT, inverted, easy to deal with test problems. [Waveform Storage Function] 16 sets of waveform can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed in different colors. [Communication between Oscilloscope and Host Computer] Support SCPI, LabVIEW communication function. Communicate with computer through the supplied USB cable. Specifications: Material: ABS Color: WhiteGrey Plug: EU / US / AU (Optional) Power Supply: 220V (AU/EU plug), 110V (US plug), 50/60Hz, CAT II Power Consumption: 15W Fuse: 2A, T class, 250V Display: 7 color LCD, 800 480 pixels Probe Attenuation Factor: 1X, 10X, 100X, 1000X Acquisition Mode: Normal, Peak detect, Averaging Sample Rate: 1GS/s Bandwidth: 100MHz Channel: 4 Working Temperature: 0?~40?, 90%RH Storage Temperature: -20?~60?, 90%RH (Please refer to the instruction manual for more detailed parameters. ) Item Size: Approx. 30*15*8cm / 11.81 * 5.91 * 3.15 in Item Weight: Approx. 1066g / 37.6 oz Package Size: Approx. 37*18* 11.5 cm / 14.57 * 7.09 * 4.53 in Package Weight: Approx. 1781g / 62.82 oz Note: Please read the instruction manual in CD Rom carefully to avoid injury and prevent damage to this product. Packing List: 1 * Oscilloscope 4 * Oscilloscope Probe 1 * Package of Accessory 1 * Power Line 1 * USB Cable 1 * CD Rom 1 * Quick Guide (English)
Owon SDS1104 4-CH Digital Storage Oscilloscope with 7-inch LCD Display Handheld Portable Oscillometer 100MHz 1GS/s AU Plug
With the characteristics of 100MHz band width, 1GS/s sampling rate and 2 types of trigger mode, this fine-quality oscilloscope features complete functions, convenient operation, long service life and high cost performance. It can transform the invisible electric signals into visible images, which is convenient for people to study the changing process of various electrical phenomena, which is widely used in communication, embedded systems, computer, research, education and other industries and fields. Features: [Humanized Design] Foot stool with adjustable tilt angle; hidden handle. [TFT LCD Screen] 7-inch color TFT LCD screen, 800*480 pixels high resolution, 65536 display colors. [4 Channels] Each channel is equipped with an independent knob to control. [Front USB Port] Support U disk storage. [Trigger Control] The oscilloscope provides two trigger types: single trigger and alternate trigger. Each type of trigger owns different sub menus. [One-click Measurement] With built-in 39 types of auto measurement, it display all the measurement values in one-click, much more convenient and efficient to view the waveform information. [Auto Cursor Function] Quickly measure the difference between two points of the waveform, helping engineers analyze the real-time measurement waveform. [Waveform Zoom Function] The upper part is the main window, which displays the complete waveform, and the lower part is the enlarged area, which helps to observe more waveform details and makes it easier to read parameter data. [FFT Spectrum Analysis Function] Provide FFT rms function, supporting Hamming, Hanning, Blackman, Rectangle, Kaiser and Bartlett. [Waveform Math Function] Contains +, -, *, /, FFT, inverted, easy to deal with test problems. [Waveform Storage Function] 16 sets of waveform can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed in different colors. [Communication between Oscilloscope and Host Computer] Support SCPI, LabVIEW communication function. Communicate with computer through the supplied USB cable. Specifications: Material: ABS Color: WhiteGrey Plug: EU / US / AU (Optional) Power Supply: 220V (AU/EU plug), 110V (US plug), 50/60Hz, CAT II Power Consumption: 15W Fuse: 2A, T class, 250V Display: 7 color LCD, 800 480 pixels Probe Attenuation Factor: 1X, 10X, 100X, 1000X Acquisition Mode: Normal, Peak detect, Averaging Sample Rate: 1GS/s Bandwidth: 100MHz Channel: 4 Working Temperature: 0?~40?, 90%RH Storage Temperature: -20?~60?, 90%RH (Please refer to the instruction manual for more detailed parameters. ) Item Size: Approx. 30*15*8cm / 11.81 * 5.91 * 3.15 in Item Weight: Approx. 1066g / 37.6 oz Package Size: Approx. 37*18* 11.5 cm / 14.57 * 7.09 * 4.53 in Package Weight: Approx. 1781g / 62.82 oz Note: Please read the instruction manual in CD Rom carefully to avoid injury and prevent damage to this product. Packing List: 1 * Oscilloscope 4 * Oscilloscope Probe 1 * Package of Accessory 1 * Power Line 1 * USB Cable 1 * CD Rom 1 * Quick Guide (English)
Owon SDS1104 4-CH Digital Storage Oscilloscope with 7-inch LCD Display Handheld Portable Oscillometer 100MHz 1GS/s EU Plug
With the characteristics of 100MHz band width, 1GS/s sampling rate and 2 types of trigger mode, this fine-quality oscilloscope features complete functions, convenient operation, long service life and high cost performance. It can transform the invisible electric signals into visible images, which is convenient for people to study the changing process of various electrical phenomena, which is widely used in communication, embedded systems, computer, research, education and other industries and fields. Features: [Humanized Design] Foot stool with adjustable tilt angle; hidden handle. [TFT LCD Screen] 7-inch color TFT LCD screen, 800*480 pixels high resolution, 65536 display colors. [4 Channels] Each channel is equipped with an independent knob to control. [Front USB Port] Support U disk storage. [Trigger Control] The oscilloscope provides two trigger types: single trigger and alternate trigger. Each type of trigger owns different sub menus. [One-click Measurement] With built-in 39 types of auto measurement, it display all the measurement values in one-click, much more convenient and efficient to view the waveform information. [Auto Cursor Function] Quickly measure the difference between two points of the waveform, helping engineers analyze the real-time measurement waveform. [Waveform Zoom Function] The upper part is the main window, which displays the complete waveform, and the lower part is the enlarged area, which helps to observe more waveform details and makes it easier to read parameter data. [FFT Spectrum Analysis Function] Provide FFT rms function, supporting Hamming, Hanning, Blackman, Rectangle, Kaiser and Bartlett. [Waveform Math Function] Contains +, -, *, /, FFT, inverted, easy to deal with test problems. [Waveform Storage Function] 16 sets of waveform can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed in different colors. [Communication between Oscilloscope and Host Computer] Support SCPI, LabVIEW communication function. Communicate with computer through the supplied USB cable. Specifications: Material: ABS Color: WhiteGrey Plug: EU / US / AU (Optional) Power Supply: 220V (AU/EU plug), 110V (US plug), 50/60Hz, CAT II Power Consumption: 15W Fuse: 2A, T class, 250V Display: 7 color LCD, 800 480 pixels Probe Attenuation Factor: 1X, 10X, 100X, 1000X Acquisition Mode: Normal, Peak detect, Averaging Sample Rate: 1GS/s Bandwidth: 100MHz Channel: 4 Working Temperature: 0?~40?, 90%RH Storage Temperature: -20?~60?, 90%RH (Please refer to the instruction manual for more detailed parameters. ) Item Size: Approx. 30*15*8cm / 11.81 * 5.91 * 3.15 in Item Weight: Approx. 1066g / 37.6 oz Package Size: Approx. 37*18* 11.5 cm / 14.57 * 7.09 * 4.53 in Package Weight: Approx. 1781g / 62.82 oz Note: Please read the instruction manual in CD Rom carefully to avoid injury and prevent damage to this product. Packing List: 1 * Oscilloscope 4 * Oscilloscope Probe 1 * Package of Accessory 1 * Power Line 1 * USB Cable 1 * CD Rom 1 * Quick Guide (English)
Owon SDS1104 4-CH Digital Storage Oscilloscope with 7-inch LCD Display Handheld Portable Oscillometer 100MHz 1GS/s UK Plug
With the characteristics of 100MHz band width, 1GS/s sampling rate and 2 types of trigger mode, this fine-quality oscilloscope features complete functions, convenient operation, long service life and high cost performance. It can transform the invisible electric signals into visible images, which is convenient for people to study the changing process of various electrical phenomena, which is widely used in communication, embedded systems, computer, research, education and other industries and fields. Features: [Humanized Design] Foot stool with adjustable tilt angle; hidden handle. [TFT LCD Screen] 7-inch color TFT LCD screen, 800*480 pixels high resolution, 65536 display colors. [4 Channels] Each channel is equipped with an independent knob to control. [Front USB Port] Support U disk storage. [Trigger Control] The oscilloscope provides two trigger types: single trigger and alternate trigger. Each type of trigger owns different sub menus. [One-click Measurement] With built-in 39 types of auto measurement, it display all the measurement values in one-click, much more convenient and efficient to view the waveform information. [Auto Cursor Function] Quickly measure the difference between two points of the waveform, helping engineers analyze the real-time measurement waveform. [Waveform Zoom Function] The upper part is the main window, which displays the complete waveform, and the lower part is the enlarged area, which helps to observe more waveform details and makes it easier to read parameter data. [FFT Spectrum Analysis Function] Provide FFT rms function, supporting Hamming, Hanning, Blackman, Rectangle, Kaiser and Bartlett. [Waveform Math Function] Contains +, -, *, /, FFT, inverted, easy to deal with test problems. [Waveform Storage Function] 16 sets of waveform can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed in different colors. [Communication between Oscilloscope and Host Computer] Support SCPI, LabVIEW communication function. Communicate with computer through the supplied USB cable. Specifications: Material: ABS Color: WhiteGrey Plug: UK Power Supply: 220V (UK plug), 50/60Hz, CAT II Power Consumption: 15W Fuse: 2A, T class, 250V Display: 7 color LCD, 800 480 pixels Probe Attenuation Factor: 1X, 10X, 100X, 1000X Acquisition Mode: Normal, Peak detect, Averaging Sample Rate: 1GS/s Bandwidth: 100MHz Channel: 4 Working Temperature: 0?~40?, 90%RH Storage Temperature: -20?~60?, 90%RH (Please refer to the instruction manual for more detailed parameters. ) Item Size: Approx. 30*15*8cm / 11.81 * 5.91 * 3.15 in Item Weight: Approx. 1066g / 37.6 oz Package Size: Approx. 37*18* 11.5 cm / 14.57 * 7.09 * 4.53 in Package Weight: Approx. 1781g / 62.82 oz Note: Please read the instruction manual in CD Rom carefully to avoid injury and prevent damage to this product. Packing List: 1 * Oscilloscope 4 * Oscilloscope Probe 1 * Package of Accessory 1 * Power Line 1 * USB Cable 1 * CD Rom 1 * Quick Guide (English)
Owon VDS6102 USB PC Virtual Oscilloscope 2 Channel 100 MHz 1Gsa/s 8bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6102 2 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 2 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 8-bit vertical accuracy, more accurate measurement. Standard built-in 5MHz signal generator. Max. 10M record length. Friendly UI, X-Y and waveform can be displayed on the same screen. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6102 oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Speicification: Brand: OWON Model: VDS6102 Plug: EU/US/UK (optional) Model: VDS6102 Bandwidth: 100MHz Vertical Resolution (A/D): 8bits Channel: 2+1 (signal source) Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 3% when 2mV Vertical Sensitivity: 2mV/div~5V/div Trigger Type: Edge, Pulse, Video, Slope Trigger Mode: Auto, Normal, and Single Line / Field Frequency (video): NTSC, PAL, and SECAM standard Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Time Base Accuracy: 25ppm Interval (?T) Accuracy (full bandwidth): Single: (1interval time+100ppmreading+ 0.6 ns), Average 16: (1 interval time+100ppmreading+ 0.4 ns) Bandwidth limitation: 20 MHz, full bandwidth Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation between channels: 50Hz: 100: 1, 10MHz: 40: 1 Interpolation: Sin (x) /x Displacement range: 20 V (100 mV/div 500 mV/div); 40 V (1 V/div 5 V/div) Single Bandwidth: full bandwidth Low frequency response(AC coupling, - 3dB): 5Hz (in BNC ) Cursor Measurement: ?V, and ?T between cursors Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6102 PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 2 * Probes 1 * Probe Adjust 1 * CD 1 * User Manual
Owon VDS6104 USB PC Virtual Oscilloscope 4 Channel 100 MHz 1Gsa/s 8bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6104 4 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 4 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 8-bit vertical accuracy, more accurate measurement. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6104 oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Specification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6104 Bandwidth: 100MHz Vertical Resolution (A/D): 8bits Channel: 4CH Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 1ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 3% when 2mV Band Width Limitation: 20MHz full bandwith Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation Between Channels: 50Hz: 100:1, 10Hz: 40:1 Interpolation: Sin (x) /x Single Bandwidth: full bandwidth Trigger Type: Edge, Pulse, Video, Slope Line/Field Frequency (video): NTSC, PAL, and SECAM standard Trigger Mode: Auto, Normal, and Single Cursor Measurement: ?V, and ?T between cursors Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6104 PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 4 * Probes 1 * CD 1 * User Manual
Owon VDS6102A USB PC Virtual Oscilloscope 2 Channel 100 MHz 1Gsa/s 14bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6102A 2 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 2 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 14-bit vertical accuracy, more accurate measurement. Standard built-in 5MHz signal generator. Max. 10M record length. Friendly UI, X-Y and waveform can be displayed on the same screen. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6102A oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Speicification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6102 Bandwidth: 100MHz Vertical Resolution (A/D): 14bits Channel: 2+1 (signal source) Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 2% when 2mV Vertical Sensitivity: 2mV/div~5V/div Trigger Type: Edge, Pulse, Video, Slope Trigger Mode: Auto, Normal, and Single Line / Field Frequency (video): NTSC, PAL, and SECAM standard Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Time Base Accuracy: 25ppm Interval (?T) Accuracy (full bandwidth): Single: (1interval time+100ppmreading+ 0.6 ns), Average 16: (1 interval time+100ppmreading+ 0.4 ns) Bandwidth limitation: 20 MHz, full bandwidth Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation between channels: 50Hz: 100: 1, 10MHz: 40: 1 Interpolation: Sin (x) /x Displacement range: 20 V (100 mV/div 500 mV/div); 40 V (1 V/div 5 V/div) Single Bandwidth: full bandwidth Low frequency response(AC coupling, - 3dB): 5Hz (in BNC ) Cursor Measurement: ?V, and ?T between cursors Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6102A PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 2 * Probes 1 * Probe Adjust 1 * CD 1 * User Manual
Owon VDS6104 USB PC Virtual Oscilloscope 4 Channel 100 MHz 1Gsa/s 8bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6104 4 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 4 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 8-bit vertical accuracy, more accurate measurement. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6104 oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Specification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6104 Bandwidth: 100MHz Vertical Resolution (A/D): 8bits Channel: 4CH Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 1ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 3% when 2mV Band Width Limitation: 20MHz full bandwith Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation Between Channels: 50Hz: 100:1, 10Hz: 40:1 Interpolation: Sin (x) /x Single Bandwidth: full bandwidth Trigger Type: Edge, Pulse, Video, Slope Line/Field Frequency (video): NTSC, PAL, and SECAM standard Trigger Mode: Auto, Normal, and Single Cursor Measurement: ?V, and ?T between cursors Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6104 PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 4 * Probes 1 * CD 1 * User Manual
Owon VDS6102 USB PC Virtual Oscilloscope 2 Channel 100 MHz 1Gsa/s 8bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6102 2 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 2 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 8-bit vertical accuracy, more accurate measurement. Standard built-in 5MHz signal generator. Max. 10M record length. Friendly UI, X-Y and waveform can be displayed on the same screen. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6102 oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Speicification: Brand: OWON Model: VDS6102 Plug: EU/US/UK (optional) Model: VDS6102 Bandwidth: 100MHz Vertical Resolution (A/D): 8bits Channel: 2+1 (signal source) Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 3% when 2mV Vertical Sensitivity: 2mV/div~5V/div Trigger Type: Edge, Pulse, Video, Slope Trigger Mode: Auto, Normal, and Single Line / Field Frequency (video): NTSC, PAL, and SECAM standard Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Time Base Accuracy: 25ppm Interval (?T) Accuracy (full bandwidth): Single: (1interval time+100ppmreading+ 0.6 ns), Average 16: (1 interval time+100ppmreading+ 0.4 ns) Bandwidth limitation: 20 MHz, full bandwidth Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation between channels: 50Hz: 100: 1, 10MHz: 40: 1 Interpolation: Sin (x) /x Displacement range: 20 V (100 mV/div 500 mV/div); 40 V (1 V/div 5 V/div) Single Bandwidth: full bandwidth Low frequency response(AC coupling, - 3dB): 5Hz (in BNC ) Cursor Measurement: ?V, and ?T between cursors Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6102 PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 2 * Probes 1 * Probe Adjust 1 * CD 1 * User Manual
Owon VDS6104 USB PC Virtual Oscilloscope 4 Channel 100 MHz 1Gsa/s 8bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6104 4 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 4 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 8-bit vertical accuracy, more accurate measurement. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6104 oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Specification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6104 Bandwidth: 100MHz Vertical Resolution (A/D): 8bits Channel: 4CH Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 1ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 3% when 2mV Band Width Limitation: 20MHz full bandwith Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation Between Channels: 50Hz: 100:1, 10Hz: 40:1 Interpolation: Sin (x) /x Single Bandwidth: full bandwidth Trigger Type: Edge, Pulse, Video, Slope Line/Field Frequency (video): NTSC, PAL, and SECAM standard Trigger Mode: Auto, Normal, and Single Cursor Measurement: ?V, and ?T between cursors Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6104 PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 4 * Probes 1 * CD 1 * User Manual
Owon VDS6102A USB PC Virtual Oscilloscope 2 Channel 100 MHz 1Gsa/s 14bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6102A 2 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 2 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 14-bit vertical accuracy, more accurate measurement. Standard built-in 5MHz signal generator. Max. 10M record length. Friendly UI, X-Y and waveform can be displayed on the same screen. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6102A oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Speicification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6102 Bandwidth: 100MHz Vertical Resolution (A/D): 14bits Channel: 2+1 (signal source) Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 2% when 2mV Vertical Sensitivity: 2mV/div~5V/div Trigger Type: Edge, Pulse, Video, Slope Trigger Mode: Auto, Normal, and Single Line / Field Frequency (video): NTSC, PAL, and SECAM standard Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Time Base Accuracy: 25ppm Interval (?T) Accuracy (full bandwidth): Single: (1interval time+100ppmreading+ 0.6 ns), Average 16: (1 interval time+100ppmreading+ 0.4 ns) Bandwidth limitation: 20 MHz, full bandwidth Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation between channels: 50Hz: 100: 1, 10MHz: 40: 1 Interpolation: Sin (x) /x Displacement range: 20 V (100 mV/div 500 mV/div); 40 V (1 V/div 5 V/div) Single Bandwidth: full bandwidth Low frequency response(AC coupling, - 3dB): 5Hz (in BNC ) Cursor Measurement: ?V, and ?T between cursors Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6102A PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 2 * Probes 1 * Probe Adjust 1 * CD 1 * User Manual
Owon VDS6102A USB PC Virtual Oscilloscope 2 Channel 100 MHz 1Gsa/s 14bits Portable ADC Type-C Digital USB Oscilloscopes PC Scopemeter
The Owon VDS6102A 2 channel 100 MHz USB oscilloscope is thin and lightweight, which can be connected to the computer via USB, but also via LAN or an optional WiFi module, so the oscilloscope can be used in any workplace. The VDS6000 USB oscilloscopes support both LabVIEW and SCPI protocols, making them easy to control and read. There is also an extra channel that serves as output for a simple 5 MHz function generator, which is also a nice addition to this scope. All in all, the VDS6000 series oscilloscopes are a nice option when mobility and performance is an important requirement. Features: 2 channel ultra thin and lightweight design with USB Type-C connect which can be powered by a 5V/2A power bank, so you can use this PC oscilloscope in any workplace. Furthermore, the type-c port support data transform, so you can share oscilloscope data with the computer for secondary analysis. Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 14-bit vertical accuracy, more accurate measurement. Standard built-in 5MHz signal generator. Max. 10M record length. Friendly UI, X-Y and waveform can be displayed on the same screen. Standard SCPI protocol supported, LabVIEW supported. Secondary development supported on Windows, Linux, Android, and iOS platform. Multiple Trigger Functions, Supports trigger functions such as edge, video, slope and pulse. Trigger types include NTSC, PAL, and SECAM standard. The trigger mode is automatic, normal, and single adjustable. This VDS6102A oscilloscope is widely used in electronic circuit testing, circuit function testing, design and manufacturing testing, education and technical training. Speicification: Brand: OWON Model: VDS6102A Plug: EU/US/UK (optional) Model: VDS6102 Bandwidth: 100MHz Vertical Resolution (A/D): 14bits Channel: 2+1 (signal source) Sample Rate: 1 GS/s Rise Time: 3.5 ns Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Sampling Mode: General sampling, peak detection, average Record Length: Max 10M Input Coupling: DC, AC, GND Input Impedance: 1MO2%, in parallel with15pF5pF Max Input Voltage: 40V Peak value(DC + AC Peak value) DC Gain Accuracy: 2% when 2mV Vertical Sensitivity: 2mV/div~5V/div Trigger Type: Edge, Pulse, Video, Slope Trigger Mode: Auto, Normal, and Single Line / Field Frequency (video): NTSC, PAL, and SECAM standard Automatic Measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay AB, Delay AB, +Width, -Width, +Duty, -Duty Time Base Accuracy: 25ppm Interval (?T) Accuracy (full bandwidth): Single: (1interval time+100ppmreading+ 0.6 ns), Average 16: (1 interval time+100ppmreading+ 0.4 ns) Bandwidth limitation: 20 MHz, full bandwidth Probe Attenuation Factor: 1X, 10X, 100X, 1000X Isolation between channels: 50Hz: 100: 1, 10MHz: 40: 1 Interpolation: Sin (x) /x Displacement range: 20 V (100 mV/div 500 mV/div); 40 V (1 V/div 5 V/div) Single Bandwidth: full bandwidth Low frequency response(AC coupling, - 3dB): 5Hz (in BNC ) Cursor Measurement: ?V, and ?T between cursors Communication Interface: USB (Typ-c); LAN, WIFi Power Source: 5-15V DC/ 1.2A Power Consumption: 8W Dimensions (W H D): 190mm120mm18mm Device Weight: 384g Packing List: 1 * VDS6102A PC Oscilloscope 1 * Power Cord 1 * Adapter 1 * Type-C Cable 1 * Q9 Cable 2 * Probes 1 * Probe Adjust 1 * CD 1 * User Manual
Owon Portable Tablet Digital Oscilloscope TAO3102 8 Inch LCD Touch Screen USB Storage Oscilloscopes 8 bits 2 Channels 100Mhz Bandwidth Handheld Tablet Scopemeter with Carry Bag Stand Holder
Features: Dual Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl. Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement. Versatile digital tablet oscilloscope with built-in 4-1/2 digits multimeter which can shows the multimeter interface. The data logging function of multimeter can record data for a long time and export to CSV file. Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc. ) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(+, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter). Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis. The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers. Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop, etc. ). Built-in Wifi Module, uses can connect with TAO3102 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work. Specification: Brand: OWON Model: TAO3102 Plug: EU/US/UK (optional) Bandwidth: 100MHz Sampling Rate: 1GS/s Vertical Resolution (A/D): 8 bits Record Length: 40M Waveform Refresh Rate: 45000 wfms/s Horizontal Scale (s/div): 1ns/div - 1000s/div, step by 1 - 2 - 5 Channel: 2 Display: 8in color LCD, 800 x 600 pixels display,multi-touch screen Input Impedance: 1MO 2%, in parallel with 15pF 5pF Max Input Voltage: 1MO 300Vrms DC Gain Accuracy: 3% Probe Attenuation Factor: 0.001X - 1000X, step by 1 - 2 - 5 Input Coupling: DC, AC, GND Vertical Sensitivity: 1mV/div - 10V/div (at input) Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART (RS232), and CAN (optional) Bus Decoding (optional): I2C, SPI, UART / RS232, CAN Trigger Mode: Auto, Normal, and Single Automatic Measurement: Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase AB, Phase AB, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay AB, Delay AB, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF Waveform Math: +, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter Waveform Storage: 100 waveforms Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional) Frequency Counter: Available Digital Multimeter: 1. Display: 4-1/2 digits 2. Auto Ranging 3. Voltage: mV ( 20.000 mV200mV); DCV ( 2.0000V 1000.0V ); ACV ( 2.0000V 750V) 4. Current: DCA ( 20.00A ); ACA ( 20.00A ) 5. Resistance: 200.00 ? 100.00M ? 6. Diode Test: Yes Battery: 7.4V, 8000mAh, 5 hours operation Dimension ( W x H x D): 270 x 191 x 48 mm Device Weight: About 1.7 kg Packing List: 1 * TAO3102 Digital Storage Oscilloscope 1 * Power Cord 1 * Adapter 1 * Micro USB Cable 1 * BNC-SAM 1 * Multimeter Lead 2 * Probe 1 * Current Ext. Module 1 * Probe Adjust 1 * Stand Holder 1 * CD ROM 1 * Quick Guide 1 * Carry Bag
Owon Portable Tablet Digital Oscilloscope TAO3104 8 Inch LCD Touch Screen USB Storage Oscilloscopes 8 bits 4 Channels 100Mhz Bandwidth Handheld Tablet Scopemeter with Carry Bag Stand Holder
Features: Four Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl. Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement. Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc. ) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(+, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter). Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis. The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers. Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop, etc. ). Built-in Wifi Module, uses can connect with TAO3104 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work. Specification: Brand: OWON Model: TAO3104 Plug: EU/US/UK (optional) Bandwidth: 100MHz Sampling Rate: 1GS/s Rise Time: 3.5 nS Horizontal Scale: 2ns / div-1000s / div 1-2-5 step Vertical Resolution (A/D): 8 bits Record Length: 40M Waveform Refresh Rate: 45000 wfms/s Horizontal Scale (s/div): 1ns/div - 1000s/div, step by 1 - 2 - 5 Channel: 4 Display: 8in color LCD, 800 x 600 pixels display,multi-touch screen Maximum Record Length: When 4 channels are turned on, the maximum record length is 10M, and maximum 20M for 2 Channels; Max 40M for 1 Channel. Input Impedance: 1MO 2%, in parallel with 15pF 5pF Max Input Voltage: 400V (DC+AC peak value) DC Gain Accuracy: 2mV, 3% Probe Attenuation Factor: 0.001X - 1000X, step by 1 - 2 - 5 Input Coupling: DC, AC, GND Vertical Sensitivity: 1mV/div - 10V/div (at input) Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART (RS232), and CAN (optional) Bus Decoding (optional): I2C, SPI, UART / RS232, CAN Trigger Mode: Auto, Normal, and Single Automatic Measurement: Period, Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Raise Time, Fall Time, + Pulse Width, - Pulse Width, + Duty Cycle, - Duty Cycle, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Delay AB, Delay AB, Cycle RMS, Cursor RMS, Screen Duty, Phase AB, Phase AB, AB, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area Waveform Math: +, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter Waveform Storage: 100 waveforms Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional) Frequency Meter: Support Battery: 7.4V, 8000mAh, 5 hours operation Dimension ( W x H x D): 270 x 191 x 48 mm Device Weight: About 1.7 kg Power Supply: 100V-240V, 50/60HZ, CATII Fuse: 2A, 250V Packing List: 1 * TAO3104 Digital Storage Oscilloscope 1 * Power Cord 1 * Adapter 1 * Micro USB Cable 1 * BNC-SAM 4 * Probe 2 * Probe Adjust 1 * Stand Holder 1 * CD ROM 1 * Quick Guide 1 * Carry Bag
Owon Portable Tablet Digital Oscilloscope TAO3102 8 Inch LCD Touch Screen USB Storage Oscilloscopes 8 bits 2 Channels 100Mhz Bandwidth Handheld Tablet Scopemeter with Carry Bag Stand Holder
Features: Dual Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl. Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement. Versatile digital tablet oscilloscope with built-in 4-1/2 digits multimeter which can shows the multimeter interface. The data logging function of multimeter can record data for a long time and export to CSV file. Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc. ) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(+, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter). Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis. The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers. Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop, etc. ). Built-in Wifi Module, uses can connect with TAO3102 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work. Specification: Brand: OWON Model: TAO3102 Plug: EU/US/UK (optional) Bandwidth: 100MHz Sampling Rate: 1GS/s Vertical Resolution (A/D): 8 bits Record Length: 40M Waveform Refresh Rate: 45000 wfms/s Horizontal Scale (s/div): 1ns/div - 1000s/div, step by 1 - 2 - 5 Channel: 2 Display: 8in color LCD, 800 x 600 pixels display,multi-touch screen Input Impedance: 1MO 2%, in parallel with 15pF 5pF Max Input Voltage: 1MO 300Vrms DC Gain Accuracy: 3% Probe Attenuation Factor: 0.001X - 1000X, step by 1 - 2 - 5 Input Coupling: DC, AC, GND Vertical Sensitivity: 1mV/div - 10V/div (at input) Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART (RS232), and CAN (optional) Bus Decoding (optional): I2C, SPI, UART / RS232, CAN Trigger Mode: Auto, Normal, and Single Automatic Measurement: Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase AB, Phase AB, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay AB, Delay AB, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF Waveform Math: +, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter Waveform Storage: 100 waveforms Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional) Frequency Counter: Available Digital Multimeter: 1. Display: 4-1/2 digits 2. Auto Ranging 3. Voltage: mV ( 20.000 mV200mV); DCV ( 2.0000V 1000.0V ); ACV ( 2.0000V 750V) 4. Current: DCA ( 20.00A ); ACA ( 20.00A ) 5. Resistance: 200.00 ? 100.00M ? 6. Diode Test: Yes Battery: 7.4V, 8000mAh, 5 hours operation Dimension ( W x H x D): 270 x 191 x 48 mm Device Weight: About 1.7 kg Packing List: 1 * TAO3102 Digital Storage Oscilloscope 1 * Power Cord 1 * Adapter 1 * Micro USB Cable 1 * BNC-SAM 1 * Multimeter Lead 2 * Probe 1 * Current Ext. Module 1 * Probe Adjust 1 * Stand Holder 1 * CD ROM 1 * Quick Guide 1 * Carry Bag
Owon Portable Tablet Digital Oscilloscope TAO3104 8 Inch LCD Touch Screen USB Storage Oscilloscopes 8 bits 4 Channels 100Mhz Bandwidth Handheld Tablet Scopemeter with Carry Bag Stand Holder
Features: Four Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl. Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement. Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc. ) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(+, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter). Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis. The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers. Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop, etc. ). Built-in Wifi Module, uses can connect with TAO3104 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work. Specification: Brand: OWON Model: TAO3104 Plug: EU/US/UK (optional) Bandwidth: 100MHz Sampling Rate: 1GS/s Rise Time: 3.5 nS Horizontal Scale: 2ns / div-1000s / div 1-2-5 step Vertical Resolution (A/D): 8 bits Record Length: 40M Waveform Refresh Rate: 45000 wfms/s Horizontal Scale (s/div): 1ns/div - 1000s/div, step by 1 - 2 - 5 Channel: 4 Display: 8in color LCD, 800 x 600 pixels display,multi-touch screen Maximum Record Length: When 4 channels are turned on, the maximum record length is 10M, and maximum 20M for 2 Channels; Max 40M for 1 Channel. Input Impedance: 1MO 2%, in parallel with 15pF 5pF Max Input Voltage: 400V (DC+AC peak value) DC Gain Accuracy: 2mV, 3% Probe Attenuation Factor: 0.001X - 1000X, step by 1 - 2 - 5 Input Coupling: DC, AC, GND Vertical Sensitivity: 1mV/div - 10V/div (at input) Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART (RS232), and CAN (optional) Bus Decoding (optional): I2C, SPI, UART / RS232, CAN Trigger Mode: Auto, Normal, and Single Automatic Measurement: Period, Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Raise Time, Fall Time, + Pulse Width, - Pulse Width, + Duty Cycle, - Duty Cycle, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Delay AB, Delay AB, Cycle RMS, Cursor RMS, Screen Duty, Phase AB, Phase AB, AB, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area Waveform Math: +, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter Waveform Storage: 100 waveforms Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional) Frequency Meter: Support Battery: 7.4V, 8000mAh, 5 hours operation Dimension ( W x H x D): 270 x 191 x 48 mm Device Weight: About 1.7 kg Power Supply: 100V-240V, 50/60HZ, CATII Fuse: 2A, 250V Packing List: 1 * TAO3104 Digital Storage Oscilloscope 1 * Power Cord 1 * Adapter 1 * Micro USB Cable 1 * BNC-SAM 4 * Probe 2 * Probe Adjust 1 * Stand Holder 1 * CD ROM 1 * Quick Guide 1 * Carry Bag
Owon Portable Tablet Digital Oscilloscope TAO3102 8 Inch LCD Touch Screen USB Storage Oscilloscopes 8 bits 2 Channels 100Mhz Bandwidth Handheld Tablet Scopemeter with Carry Bag Stand Holder
Features: Dual Channel, 100MHz bandwidth, 1 GSa/s sample rate, 8-bit high resolution hardware operationl. Excellent measurement performance, 40M record length with 100 waveform menmory storage; 45000 wfms/s waveform high refresh rate to capture detial waveform details; Low background noice allows to have better small signal measurement. Versatile digital tablet oscilloscope with built-in 4-1/2 digits multimeter which can shows the multimeter interface. The data logging function of multimeter can record data for a long time and export to CSV file. Multiple Trigger mode(Edge, Vedio, Pulse, Slope, Runt, Windows, etc. ) and bus decoding function(I2C, SPI, CAN, RS232/UART), Support multiple waveform math operatiuons(+, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter). Portable USB Oscilliscope with Built-in 8000mAh high-performance lithium battery, can be used continuously for 5 hours after fully charged. USB interface support data transform, so you can share oscilloscope data with the computer for secondary analysis. The capacitive touch 8 -inch LCD color display with a resolution of 800 x 600, with a visual feast and fast operation which is similar to the modern touch tablet computers. Side operation panel provide more precise and quick operation for trigger level, channel select, control area, vltage scale, time base and common function shortcuts keys(including Copy, Default, Autoset, Run/Stop, etc. ). Built-in Wifi Module, uses can connect with TAO3102 through mobile device, realize the same screen display and control store and view waveform data through app, share with friends, realize collaborative analysis adn successfully complete the work. Specification: Brand: OWON Model: TAO3102 Plug: EU/US/UK (optional) Bandwidth: 100MHz Sampling Rate: 1GS/s Vertical Resolution (A/D): 8 bits Record Length: 40M Waveform Refresh Rate: 45000 wfms/s Horizontal Scale (s/div): 1ns/div - 1000s/div, step by 1 - 2 - 5 Channel: 2 Display: 8in color LCD, 800 x 600 pixels display,multi-touch screen Input Impedance: 1MO 2%, in parallel with 15pF 5pF Max Input Voltage: 1MO 300Vrms DC Gain Accuracy: 3% Probe Attenuation Factor: 0.001X - 1000X, step by 1 - 2 - 5 Input Coupling: DC, AC, GND Vertical Sensitivity: 1mV/div - 10V/div (at input) Trigger Type: Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, UART (RS232), and CAN (optional) Bus Decoding (optional): I2C, SPI, UART / RS232, CAN Trigger Mode: Auto, Normal, and Single Automatic Measurement: Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase AB, Phase AB, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay AB, Delay AB, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF Waveform Math: +, -,,, FFT,FFTrms, Intg, Diff, Sqrt, User Defined Function, Digital Filter Waveform Storage: 100 waveforms Communication Interface: USB host, USB device, Pass/Fail, LAN, and WIFI (optional) Frequency Counter: Available Digital Multimeter: 1. Display: 4-1/2 digits 2. Auto Ranging 3. Voltage: mV ( 20.000 mV200mV); DCV ( 2.0000V 1000.0V ); ACV ( 2.0000V 750V) 4. Current: DCA ( 20.00A ); ACA ( 20.00A ) 5. Resistance: 200.00 ? 100.00M ? 6. Diode Test: Yes Battery: 7.4V, 8000mAh, 5 hours operation Dimension ( W x H x D): 270 x 191 x 48 mm Device Weight: About 1.7 kg Packing List: 1 * TAO3102 Digital Storage Oscilloscope 1 * Power Cord 1 * Adapter 1 * Micro USB Cable 1 * BNC-SAM 1 * Multimeter Lead 2 * Probe 1 * Current Ext. Module 1 * Probe Adjust 1 * Stand Holder 1 * CD ROM 1 * Quick Guide 1 * Carry Bag
OWON 2-in-1 Handheld Oscilloscope Multimeter 2 Channels Lab Oscilloscope Digital True-RMS Multimeter with 70 MHz Bandwidth 250MSa/s Sample Rate 3.5-Inch Color LCD Display for Car Audio Automotive
Features: The 2-in-1 versatile unit combines the function of oscilloscope and multimeter in one. 3.5 inches color LCD display, bright and clear to read for waveform details even out of doors. 2CH dual channels input, bandwidth up to 70 MHz, real-time sampling rate is 250MSa/s. Maximum 8K record length, and 10000 wfms/s refresh rate, easy to capture exceptional and low probability events. Easy to use, provided with 7 kinds of auto measurement - frequency, period, amplitude, max, min, mean, and PK-PK, perfect for professionals and novices. More functions of the oscilloscope - cursor measurement, XY mode, and data save. 20, 000 counts true-RMS multimeter able to measure AC/DC voltage, AC/DC current, resistance, diode, capacitance, and continuity. Support maximum AC 750V, DC 1000V input voltage. Auto-ranging function, easy to detect and debug. More functions of the multimeter - data hold, and relative measurement. Powered by 4400mAh lithium battery, it can work continuously for about 6 hours on a single fully charge. USB type-C interface can be charged by an adapter or a power bank, and supports PC software connection. Compact and portable for travel, with solid kickstand on the back for easy reading on workbench. Applied for the maintenance of sound systems, electronics, automobile, transceiver, etc. Parameters: [Oscilloscope] Bandwidth: 70MHz Channels: 2CH Sample Rate: 250MSa/s Acquisition Model: Normal, Peak detect Record Length: 8K Display: 3.5 -inch LCD Waveform Refresh Rate: 10000 wfrms/s Input Coupling: DC, AC, and Ground Input Impedance: 1 MO2%, in parallel with 16pF10pF Probe Attenuation Factors: 1, 10, 100, 1000 Max. Input Voltage: 400V(DC+AC, PK-PK, 1MO input impedance)( 10:1 probe attenuation) Bandwidth Limit (typical): 20MHz Horizontal Scale: 5ns/div - 500s/div, step by 1-2-5 Vertical Sensitivity: 10mV/div - 10V/div Vertical Resolution: 8 bits Trigger Type: Edge Trigger Modes: Auto, Normal, Single Automatic Measurement: Frequency, Period, Amplitude, Max, Min, Mean, PK-PK [Multimeter] Max. Resolution: 20, 000 counts Testing Mode: Voltage, Current, Resistance, Capacitance, Diode and Continuity Input Impedance: 10MO Max. Input Voltage: AC 750V, DC 1000V Max. Input Current: DC: 10A, AC: 10A Diode: 0-2A Specifications: Brand: OWON Material: ABS Color: Blue Plug Type: US / EU / UK (optional) Battery Capacity: 4400 mAh Chaging Time: approx. 4.5 hours Battery Life: approx. 6 hours Item Size: 19.8 * 9.6 * 3.8 cm / 7.79 * 3.77 * 1.49 in Item Weight: 504g / 17.77 oz Tool Bag Size: 21*14*6cm / 8.26 * 5.51 * 2.36 in Package Size: 24*16* 9.5 cm / 9.44 * 6.29 * 3.74 in Package Weight: 1049g / 37oz Packing List: 1 * Oscilloscope 1 * Probe 1 * Probe Adjust 1 * USB Cable 2 * Test Lead 1 * BNC to Alligator Clip 1 * Carrying Bag 1 * User Manual (English)
OWON 2-in-1 Handheld Oscilloscope Multimeter 2 Channels Lab Oscilloscope Digital True-RMS Multimeter with 70 MHz Bandwidth 250MSa/s Sample Rate 3.5-Inch Color LCD Display for Car Audio Automotive
Features: The 2-in-1 versatile unit combines the function of oscilloscope and multimeter in one. 3.5 inches color LCD display, bright and clear to read for waveform details even out of doors. 2CH dual channels input, bandwidth up to 70 MHz, real-time sampling rate is 250MSa/s. Maximum 8K record length, and 10000 wfms/s refresh rate, easy to capture exceptional and low probability events. Easy to use, provided with 7 kinds of auto measurement - frequency, period, amplitude, max, min, mean, and PK-PK, perfect for professionals and novices. More functions of the oscilloscope - cursor measurement, XY mode, and data save. 20, 000 counts true-RMS multimeter able to measure AC/DC voltage, AC/DC current, resistance, diode, capacitance, and continuity. Support maximum AC 750V, DC 1000V input voltage. Auto-ranging function, easy to detect and debug. More functions of the multimeter - data hold, and relative measurement. Powered by 4400mAh lithium battery, it can work continuously for about 6 hours on a single fully charge. USB type-C interface can be charged by an adapter or a power bank, and supports PC software connection. Compact and portable for travel, with solid kickstand on the back for easy reading on workbench. Applied for the maintenance of sound systems, electronics, automobile, transceiver, etc. Parameters: [Oscilloscope] Bandwidth: 70MHz Channels: 2CH Sample Rate: 250MSa/s Acquisition Model: Normal, Peak detect Record Length: 8K Display: 3.5 -inch LCD Waveform Refresh Rate: 10000 wfrms/s Input Coupling: DC, AC, and Ground Input Impedance: 1 MO2%, in parallel with 16pF10pF Probe Attenuation Factors: 1, 10, 100, 1000 Max. Input Voltage: 400V(DC+AC, PK-PK, 1MO input impedance)( 10:1 probe attenuation) Bandwidth Limit (typical): 20MHz Horizontal Scale: 5ns/div - 500s/div, step by 1-2-5 Vertical Sensitivity: 10mV/div - 10V/div Vertical Resolution: 8 bits Trigger Type: Edge Trigger Modes: Auto, Normal, Single Automatic Measurement: Frequency, Period, Amplitude, Max, Min, Mean, PK-PK [Multimeter] Max. Resolution: 20, 000 counts Testing Mode: Voltage, Current, Resistance, Capacitance, Diode and Continuity Input Impedance: 10MO Max. Input Voltage: AC 750V, DC 1000V Max. Input Current: DC: 10A, AC: 10A Diode: 0-2A Specifications: Brand: OWON Material: ABS Color: Blue Plug Type: UK Battery Capacity: 4400 mAh Chaging Time: approx. 4.5 hours Battery Life: approx. 6 hours Item Size: 19.8 * 9.6 * 3.8 cm / 7.79 * 3.77 * 1.49 in Item Weight: 504g / 17.77 oz Tool Bag Size: 21*14*6cm / 8.26 * 5.51 * 2.36 in Package Size: 24*16* 9.5 cm / 9.44 * 6.29 * 3.74 in Package Weight: 1049g / 37oz Packing List: 1 * Oscilloscope 1 * Probe 1 * Probe Adjust 1 * USB Cable 2 * Test Lead 1 * BNC to Alligator Clip 1 * Carrying Bag 1 * User Manual (English)
OWON OW18E 4 1/2 Digit Smart BLE 4.0 Multimeter True RMS Digital High Accuracy LCD Multimeter with Wireless Connection Data Log Auto-ranging AC/DC Voltage and Current Resistance Capacitance Frequency
This multimeter can do a variety of testings, including DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Notably, it features BLE 4.0 wireless transmission, which allows it to connect with phone or PC and display data in chart format, making it easy for you to analyze data. Features: True RMS multimeter - capable of testing DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Large backlit LCD plus flashlight - 4 1/2 digit display on large backlit LCD making it easy to read; equipped with a flashlight, it is convenient for working in dark areas. BLE 4.0 wireless transmission - it has a BLE 4.0 feature which is fast and stable, allowing it to connect with phone or PC, and both Android, iOS and Windows systems are supported. Data Logging - it can collect and store data, and display in chart format for quick analysis. It also supports offline data memory for later checkup. Durability and safety - it is made of durable housing and meet CAT?-600V; CAT?-1000V safety standard, durable and safe to use, suitable for electronic circuit debugging, circuit testing, design and manufacture, study and experiment, etc. Parameters: Model: OW18E Measurement Range Resolution Accuracy DC Voltage mV 20.000 mV 0.001 mV ( 0.05 %+10 dig) 200.00 mV 0.01 mV V 2.0000V 0.1 mV ( 0.1 %+2 dig) 20.000V 1mV 200.00V 10mV 1000.0V 0.1V ( 0.15 %+5 dig) AC Voltage mV 20.000 mV 0.001 mV VRMS Freq range: 40Hz - 1000Hz ( 0.5 %+10dig) 200.00 mV 0.01 mV V 2.0000V 0.1 mV 20.000V 1mV 200.00V 10mV 750.0V 0.1V ( 0.8 %+10dig) DC Current µA 200.00 uA 0.01 µA ( 0.5 %+10dig) mA 2.0000 mA 0.1 µA 20.000 mA 1µA 200.00 mA 10µA A 20.000A 1mA ( 2.0 %+10dig) AC Current µA 200.00 uA 0.01 µA VRMS Freq range: 40Hz - 1000Hz ( 0.8 %+10dig) mA 2.0000 mA 0.1 µA 20.000 mA 1µA 200.00 mA 10µA A 20.000A 1mA ( 2.5 %+10dig) Resistance 200.00 O 0.01 O ( 0.5 %+10dig) 2.0000 O 0.1 O ( 0.3 %+3dig) 20.000 kO 1O ( 0.3 %+1dig) 200.00 kO 10O 2.0000M O 100O 20.000M O 1KO ( 0.5 %+1dig) 200.00M O 10KO ( 5.0 %+10dig) Capacitance 2.0000 nF 0.1 pF ( 3.0 %+10dig) 20.000 nF 1pF 200.00 nF 10pF 2.0000 µF 100pF 20.000 µF
OWON OW18B 3 5/6 Digit Smart BLE 4.0 Multimeter True RMS Digital High Accuracy LCD Multimeter with Wireless Connection Data Log Auto-ranging AC/DC Voltage and Current Resistance Capacitance Frequency
This multimeter can do a variety of testings, including DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Notably, it features BLE 4.0 wireless transmission, which allows it to connect with phone or PC and display data in chart format, making it easy for you to analyze Features: True RMS multimeter - capable of testing DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Large backlit LCD plus flashlight - 3 5/6 digit display on large backlit LCD making it easy to read; equipped with a flashlight, it is convenient for working in dark areas. BLE 4.0 wireless transmission - it has a BLE 4.0 feature which is fast and stable, allowing it to connect with phone or PC, and both Android, iOS and Windows systems are supported. Data Logging - it can collect and store data, and display in chart format for quick analysis. It also supports offline data memory for later checkup. Durability and safety - it is made of durable housing and meet CAT?-600V; CAT?-1000V safety standard, durable and safe to use, suitable for electronic circuit debugging, circuit testing, design and manufacture, study and experiment, etc. Parameters: Model: OW18B Measurement Range Resolution Accuracy DC Voltage mV 60.00 mV / 600.0 mV 0.01 mV ( 0.5 %+2 dig) V 6.000V / 60.00V / 600.0V 1 mV 1000V 1 V ( 0.8 %+2 dig) AC Voltage mV 600.0 mV 0.01 mV ( 0.8 %+3dig) V 6.000V / 60.00V / 600.0V 1 mV 750V 1 V (1%+3dig) DC Current µA 600.0 uA/6000µA 0.1 µA ( 0.8 %+2dig) mA 60.00 mA/ 600.0 mA 0.01 mA A 20.00A 0.01A ( 1.2 %+3dig) AC Current µA 600.0 uA/6000µA 0.1 µA (1%+3dig) mA 60.00 mA/ 600.0 mA 0.01 mA A 20.00A 0.01A ( 1.5 %+3dig) Resistance 600.0 O / 6.000 kO / 60.00 kO / 600.0 kO / 6.000M O 0.1 O ( 0.8 %+2dig) 60.00M O 0.01 MO (2%+3dig) Capacitance 60.00 nF / 600.0 nF / 6.000 µF / 60.00 µF 0.01 nF ( 2.5 %+3dig) 600.0 µF / 6.000 mF / 60.00 mF 0.1 µF (3%+5dig) Frequency 9.999H z / 99, 99Hz/ 999.9H z / 9.999 kHz / 99.99 kHz / 999.9 kHz / 9.999MH z 0.001H z ( 0.8 %+2dig) Duty Ratio 0.1 % - 99.9 %( typical value:Vrms=1V, f=1kHz) 0.1 % ( 1.2 %+3dig) 0.1 % - 99.9 % ( 1kHz ) ( 2.5 %+3dig) Temperature (C/F) - 50 ?~ +400? 1? ( 2.5 %+3dig) -58 ?~ +752 ? 1? ( 4.5 %+5dig) Digit Display 5999 Frequency Response (40 - 1000) Hz Shift Rate 3 times/s Specifications: Brand: OWON Model: OW18B Material: ABS Color: Blue BLE Version: BLE 4.0 Battery Type: 9V Battery (6F22) (Not included) Safety Standard: CAT?-600V; CAT?-1000V Item Size: 196 * 88.5 * 56mm / 7.7 * 3.48 * 2.2 in Item Weight: 320g / 11
OWON OW18E 4 1/2 Digit Smart BLE 4.0 Multimeter True RMS Digital High Accuracy LCD Multimeter with Wireless Connection Data Log Auto-ranging AC/DC Voltage and Current Resistance Capacitance Frequency
This multimeter can do a variety of testings, including DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Notably, it features BLE 4.0 wireless transmission, which allows it to connect with phone or PC and display data in chart format, making it easy for you to analyze data. Features: True RMS multimeter - capable of testing DC/AC voltage, AC/DC current, resistance, capacitance, frequency, NCV, diode, and temperature(?/?). Large backlit LCD plus flashlight - 4 1/2 digit display on large backlit LCD making it easy to read; equipped with a flashlight, it is convenient for working in dark areas. BLE 4.0 wireless transmission - it has a BLE 4.0 feature which is fast and stable, allowing it to connect with phone or PC, and both Android, iOS and Windows systems are supported. Data Logging - it can collect and store data, and display in chart format for quick analysis. It also supports offline data memory for later checkup. Durability and safety - it is made of durable housing and meet CAT?-600V; CAT?-1000V safety standard, durable and safe to use, suitable for electronic circuit debugging, circuit testing, design and manufacture, study and experiment, etc. Parameters: Model: OW18E Measurement Range Resolution Accuracy DC Voltage mV 20.000 mV 0.001 mV ( 0.05 %+10 dig) 200.00 mV 0.01 mV V 2.0000V 0.1 mV ( 0.1 %+2 dig) 20.000V 1mV 200.00V 10mV 1000.0V 0.1V ( 0.15 %+5 dig) AC Voltage mV 20.000 mV 0.001 mV VRMS Freq range: 40Hz - 1000Hz ( 0.5 %+10dig) 200.00 mV 0.01 mV V 2.0000V 0.1 mV 20.000V 1mV 200.00V 10mV 750.0V 0.1V ( 0.8 %+10dig) DC Current µA 200.00 uA 0.01 µA ( 0.5 %+10dig) mA 2.0000 mA 0.1 µA 20.000 mA 1µA 200.00 mA 10µA A 20.000A 1mA ( 2.0 %+10dig) AC Current µA 200.00 uA 0.01 µA VRMS Freq range: 40Hz - 1000Hz ( 0.8 %+10dig) mA 2.0000 mA 0.1 µA 20.000 mA 1µA 200.00 mA 10µA A 20.000A 1mA ( 2.5 %+10dig) Resistance 200.00 O 0.01 O ( 0.5 %+10dig) 2.0000 O 0.1 O ( 0.3 %+3dig) 20.000 kO 1O ( 0.3 %+1dig) 200.00 kO 10O 2.0000M O 100O 20.000M O 1KO ( 0.5 %+1dig) 200.00M O 10KO ( 5.0 %+10dig) Capacitance 2.0000 nF 0.1 pF ( 3.0 %+10dig) 20.000 nF 1pF 200.00 nF 10pF 2.0000 µF 100pF 20.000 µF
