Buy Mission Engineering Inc Products online in United States

Mission Engineering EP11BK Expression Pedal for Eleven Rack

Mission Engineering EP11BK Expression Pedal for Eleven Rack condition: New Brand: Mission Engineering MPN: EP-11-BK

Mission Engineering Expressionator Multi-Expression Controller Pedal

The Mission Engineering Expressionator is the world's first programmable multi-expression controller. Connect one expression pedal with up to three expression enabled effects and control them individually or simultaneously. Expressionator is a digital device that samples the input from a regular expression pedal, digitally manipulates it, stores it and then converts the signal back to three analog outputs either via digital potentiometer or CV. Unlike an analog splitter, Expressionator stores the pedal the position on each channel, holding an effect in one position, while you switch to another function. For example you could set volume control to 50% and Expressionator will hold it there while you switch your expression pedal away to control wah. When you are done, you can switch back to take over volume control again. Each channel is individually programmable so you can set independent start, stop positions and tapers for each effect. No need to have different expression pedals for different effects. Expressionator can also be set to control multiple devices at once, so you could decrease reverb mix, increase delay repeats, and increase gain at the same time from one pedal. Programs are saved to flash memory so that your settings are ready to go when you power on. Expressionator is switchable on a per channel basis to provide either passive expression or +5V CV out, so it can be used with synth modules, keyboards and other CV devices as well as effects pedals, rack units, and MIDI controllers. Almost any TRS expression pedal can be used as an input. You can even use a passive volume pedal, and Expressionator can convert it to behave like a linear expression pedal Expressionator is compatible with expression pedal inputs on most stomp boxes, MIDI controllersand multi effects units.

Mission Engineering Expression Guitar Pedal for Kemper Black

Use the Mission Engineering EP1-KP switching expression pedal to get the most out of your Kemper Profiler. The EP1-KP sports a linear potentiometer that’s matched exactly to the specifications of the Kemper Profiler, for a precise and natural response. Even better, the pedal has a toe switch to turn effects on and off without requiring a separate footswitch. The EP1-KP is available in green or black finish to perfectly complement your Kemper Profiler, and works with both the rack and head versions.

Mission Engineering EP-HR Expression Pedal for Headrush Pedalboard

Mission Engineering EP-HR Expression Pedal for Headrush Pedalboard condition: New Brand: Mission Engineering MPN: Does Not Apply

Mission Engineering EP1KPGN Expression Pedal for Kemper Profiling Amps

Use the Mission Engineering EP1-KP switching expression pedal to get the most out of your Kemper Profiler. The EP1-KP sports a linear potentiometer that’s matched exactly to the specifications of the Kemper Profiler, for a precise and natural response. Even better, the pedal has a toe switch to turn effects on and off without requiring a separate footswitch. The EP1-KP is available in green or black finish to perfectly complement your Kemper Profiler, and works with both the rack and head versions.

Mission Engineering GM-Io Powered Guitar Speaker Cabinet

The Mission Engineering GM-Io is a 1x12, 450W full-range active monitor that is a fraction of the size and weight of a typical stage cabinet. Io utilizes the latest technology to provide the power and features of a full size monitor in an easily transportable package. At just 29 lb., Io can easily fit into a small case or large back pack. It can even be taken as airline carry-on, making it ideal for fly rigs. The 12" main driver features a Neodymium magnet, and aluminum basket construction providing 500W power handling from a unit that weighs just 5 lb. A 1" compression driver with 80 degree circular horn provides good high frequency dispersion with very low distortion. Io is an active monitor with on board 450W power amplifier providing excellent bandwidth characteristics at very low distortion. Advanced firmware running on Analog Devices SigmaDSP audio processors includes multi channel parametric equalizers, and an 8th order Linkwitz-Riley crossover providing a flat frequency response up to 20KHz. Automatic compressors and limiters protect the system against damage from audio spikes and similar events. These features make Io ideal for use with current modelers and cabinet simulators such as the Line 6 Helix, Kemper Profiler, and Fractal Audio Axe-Fx. Connection is via a balanced XLR connection on the rear panel, with a single master level control. Other features are handled automatically by internal software, making Io quick and easy to setup and use. Cabinet is made in the USA from void free Baltic Birch with slant front, black Taurus covering, Silver basket grill cloth and black metal corners. Four rubber feet, and a top carry handle with black metal trim are included.