Markbass Nano Mark 300 Compact 300W Bass Amp Head Red
The Nano Mark 300 bass amp head raises the bar for portable amps. This professional-grade, 300W head weighs in at just 3.2 lbs., while featuring enough power for most gigs, FX loop, line out, tuner out, controls including a 4-band EQ, gain and volume, and rich, warm Markbass tone.
Markbass New York 151 Bass Speaker Cabinet Black 8 Ohms
Dimensions (Overall): 19.69 inches (H) x 20.08 inches (W) x 22.05 inches (D)Weight: 45.19 poundsStyle: CabinetWattage Output: 400 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Impedance: 8 Ohms & bull; Speaker size: 1x15" & bull; Bass port: rear & bull; Tweeter: piezo & bull; Power handling: 400W RMS (AES Standard)Part of Mark Bass' New York Series of bass speaker cabinets, this little powerhouse is the perfect extension for either the Mini CMD 151P combo or the CMD 151P Jeff Berlin combo. It's also a great lightweight option for combining with any 500W Markbass amp. This Markbass New York speaker series is named after the world's most famous city, where bassists often lug their rigs by subway or taxi to get to gigs. Because of this issue, Markbass set out to create a combo amp that had the power, but not the bulkiness of a regular bass combo. The end result speaks for itself. The sound of this bass speaker cabinet is smooth and warm, with sweet full range and a deep tone that extends down to 40Hz. The Markbass New York 151 features one 15" speaker and a piezo tweeter with 400W of power handling.
Markbass Micromark 801 60W 1x8 Bass Combo Amp
The Micromark packs punch, but is still small enough to deliver the Markbass sound anywhere, but big enough to provide a fuller sound with plenty of bottom end! The Markbass Micromark 801 features a single yellow 8" Markbass neodymium speaker. The original (6") Micromark has been astounding people since its first introduction a few years ago. But this new version is even more sonically impressive.
Markbass MB Mini Dist Compact Bass Distortion Effects Pedal
Dimensions (Overall): 5.5 inches (L), 2.75 inches (H) x 5.5 inches (W) x 5.5 inches (D)Weight: 1.04 poundsEffect Type: Bass EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Input: mono 1„4" jack & bull; Input impedance: 1.5 Mohm 6 Vpp & bull; Drive: +60 dB (maximum gain) & bull; Tone 1: Tone Control from 200 Hz to 2.5 kHz & bull; Tone 2: from 0 to - 20dB at 800 HzThe MB Mini series of pedals from Markbass is made to the same high quality level as their standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means can use them with any standard power supply. Based on the Markbass Bass Tube Marker, the MB Mini Dist offers many improvements as well as two tone controls to customize grit. The MB Mini Dist supplies natural amp-like distortion, ranging from sweet overdrive to wild distortion tones. It has very dynamic, touch-sensitive response, a large output range and a wide range of tonal nuances thanks to the two tone controls. Its versatility makes it useful for any musical style. MB Mini Dist offers first-rate professional features and exceptional sound quality in an ultra-compact, lightweight chassis, smaller and lighter than other stompboxes. Its standard 9-12V voltage allows to power it with most common pedal board power supplies. Like all Markbass pedals, the MB Mini Dist features "true bypass": that means that when the distortion is "off", signal goes directly from the input jack to the output jack without any degradation of audio quality. The MB Mini Dist features high-quality components for the best sound quality, and is 100% Made in Italy.
Markbass CMD 151P Jeff Berlin Signature 300W 1x15 Bass Combo Amp
Dimensions (Overall): 22.05 inches (L), 19.66 inches (H) x 20.08 inches (W) x 22.05 inches (D)Weight: 57.76 poundsStyle: ComboWattage Output: 300 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Designed by legendary bass soloist Jeff Berlin & bull; Built-in Little Mark II preamp & bull; Great power-to-weight ratio & bull; Made of high-grade, multi-ply poplar & bull; Glued, screwed, and sealed internally with special compounds for maximum sound qualityJeff Berlin teamed up with Markbass to create this sweet signature bass combo amp, the CMD 151P. Jeff is a master bass soloist who has been playing with some of the greats for the past 30 years, including Isaac Hayes, Bill Bruford, John Mclaughlin, and the Brecker Brothers, just to name a few. Like the other CMD amp models, the 151 combo has a built-in Little Mark II preamp to help achieve own signature sound. The Markbass CMD 151 also has 4-band EQ and VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters. Unlike other bass amplifiers, the Markbass CMD 151 has no tweeter. Jeff doesn't believe in them. And if listen to any of his performances, 'll notice there's nothing missing in his sound. The 400W 15" Markbass custom speaker will give all the sound need with a tone 'll find impeccably unique and warm. Just like Jeff Berlin's playing.
Markbass Little Mark III Bass Amp Head
The Little Mark III amp head's DI input features a pre/post EQ switch and output level control, so you can optimize the signal you send to your mixer or recording unit. All this capability comes in the same compact size and weight as its Markbass predecessor.
Markbass Solo Series Stainless Steel Electric Guitar Strings (9-42)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Solo Series Stainless Steel Electric Guitar Strings are made of exclusive corrosion-resistant alloy steel wire that is wound on a hexagonal high carbon content core and they offer a super bright, harmonic, rich tone. These reliable, easy-to-tune strings magnify the tonal character of guitar from the very first note.
Markbass Cover CMD JB Players School
Dimensions (Overall): 23.0 inches (L), 3.75 inches (H) x 19.75 inches (W)Weight: 2.63 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The lightness and portability of Markbass products is to some degree negated when heavy flight-cases are used. But when the musician transports his gear himself (in other words, outside of tour situations where the goods are transported by others), Markbass covers are a practical choice: lighter, less expensive, and still very protective.
Markbass Classic 108 Casa 1,600W 8x10 Bass Speaker Cabinet
Dimensions (Overall): 46.4 inches (L), 21.75 inches (H) x 26.5 inches (W) x 46.4 inches (D)Weight: 90.2 poundsStyle: CabinetWattage Output: 600 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power handling: 1,600W & bull; Speakers: 8x10 Markbass neodymium; 1" compression driver & bull; Impedance: 4 ohm & bull; Crossover frequency: 3.5 kHz & bull; Frequency response: 54Hz–20kHzThe Markbass Classic 108 cabinet is the perfect choice to satisfy the needs and desires of bassists who like the look and sound of old standards, with the benefits of modern standards.The power and lightness of this cabinet put it in a new league compared to the 8x10" cabinets from the past, which tended to be very heavy and lacked power. The CLASSIC 108 closed cabinet (with no bass ports) features 10" Markbass custom neodymium speakers with 1,600W of power handling from only 89 lbs!The Classic 108 looks vintage but it offers a wide range of tone from classic '70s to the high-end modern sounds, thanks to the 1" compression driver with custom horn controlled by the tweeter level control, allowing to extend the high-end frequency response from 6 kHz to 20kHz!Old-Style Sealed CabinetThe closed cabinet design of the Classic 108 makes it a great choice if want a vintage 70s sound; if want to add a modern high-end sizzle to sound, turn on the tweeter level control of the 1" compression driver and extend the cab frequency response from 6 kHz to 20kHz!Vintage Design with Modern ConstructionThe CLASSIC 108 has a very cool vintage design but with the benefit of new modern standard, with a long term reliability thanks to our advanced production procedures, state-of the-art testing, quality control facilities and top- quality components.Great Tone, Amazing Power, Lightweight ConstructionIn addition to the great tone and 1600W of power handling the CLASSIC 108 CASA has an incredible lightweight package for a 8x10" cabinet: only 89.95 lbs / 40.8 kg.
Markbass Micromark 801 60W 1x8 Bass Combo Amp
Dimensions (Overall): 14.0 inches (L), 12.5 inches (H) x 12.6 inches (W) x 14.0 inches (D)Weight: 19.1 poundsStyle: ComboWattage Output: 60 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Super compact with 1 x 8" speaker & bull; 60W capable of powering additional cab & bull; Aux in for jamming with audio tracks & bull; Headphone out & bull; Optional external tweeterThe Micromark packs punch, but is still small enough to deliver the Markbass sound anywhere, but big enough to provide a fuller sound with plenty of bottom end! The Markbass Micromark 801 features a single yellow 8" Markbass neodymium speaker. The original (6") Micromark has been astounding people since its first introduction a few years ago. But this new version is even more sonically impressive!
Markbass CMD 121H 300/500W 1x12 Bass Combo Amp
Dimensions (Overall): 25.43 inches (L), 18.11 inches (H) x 20.63 inches (W) x 25.43 inches (D)Weight: 49.6 poundsStyle: ComboWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 12" Markbass custom woofer & bull; 1" compression driver with custom horn & bull; Little Mark II preamp built into front panel & bull; Great power-to-weight ratio & bull; Made of high-grade, multi-ply poplarThe Markbass CMD 121H is a bass combo amplifier that delivers incredible, professional-quality sound in a compact, easy-to-manage package. Less than 2' wide or tall, and under 40 pounds, the CMD 121H provides an amazingly large amount of power with its 12" Markbass custom woofer with a 1" compression driver with custom horn. This is due in part to the excellent design of the speaker, and the way the cabinet was built to protect the integrity of sound. But the CMD121H amps's sound is also increased by the built-in presence of the Little Mark II solid state preamp. It gives a 4-band EQ, Markbass' own VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, and the ability to hook up to an extension cab for even more room-filling sound.
Markbass Traveler 121 Ninja 1x12 Richard Bona Signature Bass Speaker Cabinet Black
The Richard Bona signature Traveler 121 Ninja cabinet has been developed alongside the Little Mark Ninja head to bring you Richard' full sound and tone! Suitable for use with any Markbass head regardless of power, as the 12" Markbass custom speaker handles an astonishing 800W of power, delivering full volume in a smaller, warm-sounding rig. The Traveler 121 Ninja accurately reproduces the sound of your instrument without compromise, perfectly aligned with the vision of Richard Bona and Marco De Virgiliis.
Markbass Tweeter Box External Tweeter for Micromark
Dimensions (Overall): 4.9 inches (L), 3.9 inches (H) x 3.9 inches (W) x 4.9 inches (D)Weight: .6 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; For use with a Micromark practice amp & bull; easy closure pad on bottom for secure placementThe tiny Markbass Tweeter Box External Tweeter can be easily transported from practice space to practice space. If own a Micromark practice amp and feel 're missing out some of the higher frequencies, this little external Tweeter Box will solve problem. Weighs less than half a pound. Just plug the Markbass Tweeter Box into Micromark, use the easy closure-padded bottom to help secure it and start rediscovering high-end response. The tweeter itself is a Piezo that produces 20W RMS (AES Standard) power of sound. NOTE: To maximize the volume produced by Micromark, place the combo on the floor for the fullest low end, and angle the tweeter toward ear-level so can hear the more directional high frequencies.
Markbass Mark Vintage Pre Tube Bass Preamp Pedal Metal
Dimensions (Overall): 11.4 inches (L), 4.0 inches (H) x 7.6 inches (W) x 11.4 inches (D)Weight: 2.8 poundsEffect Type: Bass EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 4-band EQ 3-WAY Switch & bull; Two Types of Distortion Blend Control & bull; Boost & bull; Real DI box & bull; Digital OutsAfter the great reaction to the Little Mark Vintage Head, Markbass designed the Mark Vintage Pre. The Mark Vintage Pre delivers a massively wide palette of tone options, from modern sounds to vintage ones to fit pretty much any genre ’re going for. But this pedal is more than just a preamp. get a tube preamp, a 4 band EQ, two switchable EQ filters, two different types of drive with level and blend controls, a headphone practice amp with an aux-in and headphone out and a switchable effects loop which can also be used as a tuner output. 4-band EQ / 3-WAY SwitchLike the Little Mark Vintage head, MARK VINTAGE PRE 4 Bands EQ section has a new setting on frequencies center, all tuned to offer a pretty balanced tone that easily cuts in the mix, plus a 3-WAY switch with three useful EQ preset options to get very quickly a real FLAT setting, a CUT one with scooped Mids and enhanced Low and High and an OLD one with scooped High to get an old vintage style tone.Two Types of Distortion / Blend ControlThe Mark Vintage Pre offers two types of distortion (selectable via foot switch). The amount of drive tone, ranging from crunchy overdrive to aggressive distortion, is controlled by the Drive pot. The Blend control allows to mix the Drive tone with the Clean signal of the tube preamp. Adding a bit of distortion during a studio recording gives a 'gorgeous' bass sound cutting in the mix.BoostThe Boost switch allows to boost signal level to +6 dB and instantly get more headroom whenever need it. Real DI boxThe Balanced DI Out is a real DI box with transformer. It is optimized to deliver pure, full, rich sound on all frequencies, handling extreme transients without distortion or coloration.Aux IN / Headphone OUT / FX LOOPThe Mark Vintage Pre includes a headphones output and an aux input for connecting an iPod or MP3 player in order to mix it with bass sound. This allows discrete playing and practicing anywhere, anytime. Plus, a send/return FX loop to interface favorite stomp boxes and multi-effect units is also included.True BypassThis pedal features “true bypass” circuit: that means when the Mark Vintage Pre is 'off', there will be no audio signal quality loss.
Markbass Mark Stand Folding Cab Stand
This ingenious little accessory is made to support any Markbass cabinet, giving the playing bassist a "monitor" position. Though it is lightweight, its smart folding design gives it all the support it needs to prop up even the heaviest of Markbass' cabs, and is small enough to fit in a gig bag between shows.
Markbass Legacy Series Nickel Plated Steel Electric Strings (10-46)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Legacy Series Strings are made of high quality selected nickel-plated steel wire that is wound on a hexagonal high carbon content core with high quality breaking strength steel. These strings offer classic brilliant warm tone and excellent tuning, giving a full spectrum of sound suitable for any style of playing.
Markbass MB RB KILIMANJARO 5-String Natural
Dimensions (Overall): 54.0 inches (L), 7.0 inches (H) x 18.5 inches (W)Weight: 20.02 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 5Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Lightweight swamp ash body & bull; Figured maple top & bull; 1-piece quarter sawn maple neck & bull; Flame maple fingerboard with 24 frets & bull; Bartolini pickupsThe MB RB Kilimanjaro 5-String from Markbass delivers the towering tone worthy of being named after the highest peak in Africa. Designed step by step with Richard Bona, the Kilimanjaro Bass features a lightweight swamp ash body with a figured maple top for bright resonance, along with a maple neck and fingerboard. Equipped with Bartolini pickups for a classic bass sound, the MB RB Kilimanjaro is powerful, comfortable bass with quality electronics.
Markbass Legacy Series Nickel Plated Steel Electric Strings (11-49)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Legacy Series Strings are made of high quality selected nickel-plated steel wire that is wound on a hexagonal high carbon content core with high quality breaking strength steel. These strings offer classic brilliant warm tone and excellent tuning, giving a full spectrum of sound suitable for any style of playing.
Markbass MB JF1 White Battered
Dimensions (Overall): 54.0 inches (L), 7.25 inches (H) x 18.75 inches (W)Weight: 16.6 poundsHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 4Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Solid spruce body & bull; Maple neck & bull; Rosewood fingerboard with 20 frets and vintage cream binding & bull; J-style single coil passive pickup & bull; Markbass die-cast bridgeThe MB JF1 Bass from Markbass is designed to be a combination of simplicity and functionality with a vintage look. Featuring a hard maple neck for durability, rosewood fingerboard, a lightweight spruce body and single coil J style passive pickup, the MB JF1 delivers an even tone in just about any setting. Whether ’re plugged in or not, the MB JP 4-string bass allows total expression for any bassist looking to add a little old school flair to their performance.
Markbass Mini CMD 151P 300/500W 1x15 Bass Combo Amp
Dimensions (Overall): 21.8 inches (L), 19.2 inches (H) x 20.6 inches (W) x 21.8 inches (D)Weight: 39.7 poundsStyle: MiniWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Built-in Little Mark II solid state preamp on top rear & bull; 15" Markbass custom woofer & bull; Piezo tweeter & bull; Great power-to-weight ratio & bull; Made of high-grade, multi-ply poplarThe Markbass CMD 151P is a bass combo amplifier equipped with Markbass' flagship solid state preamp, the Little Mark II. Despite being a Mini model, the CMD 151P amp gives maximum power and sound. The amp provides plenty of power to blow through the high-quality 15" Markbass custom woofer and piezo tweeter. The CMD 151P also has 2 speaker outs which allow to hook up to another 8 ohm extension cab, giving a 500W rig! The Little Mark II has a 4-band EQ, as well as two exclusive Markbass' filters for rounding out tone to perfection. A handle on top makes Markbass CMD 151P amp easy to transport too.
Markbass Kimandu 4 Richard Bona Signature Bass Green
Dimensions (Overall): 53.75 inches (L), 7.0 inches (H) x 18.5 inches (W)Weight: 17.95 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 4Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Neck & bull; Shape: D & bull; Wood: Maple & bull; Neck joint: 5-Bolt & bull; Scale length: 34 in.The actual hard thing while talking about this version is focusing the differences with the Hi-End one, having the Kimandu bass the same charm, same design and same product philosophy, keeping the same main features, but using a production process letting MarkBass offer it at an incredible price.WoodsBody: MarkBass chose a two-piece alder body, one of the most used wood thanks to its round and sparkling tonal characteristics, still keeping a standard weight. Body and matching headstock are Green painted, a color enhancing the design charm and that is also a trademark of the whole Ninja series.Neck: Canadian maple with flat cut and two graphite bars to offer maximum stability, with a pretty comfortable profile and dual action truss rod adjustable on the headstock.Fretboard: Maple, 34" scale, 24 ultra carefully refinished frets and black GraphTech nut.HardwareOn the Kimandu version they’ve chosen high quality custom machine heads, 20:1 ratio, ultra light, precise and reliable. MarkBass picked a high quality Custom bridge as well with zinc saddles wrenched on the bridge base to get the best sustain and sound transfer.PickupsThe Kimandu version soapbar pickups have been custom built on Markbass specs to perfectly match our electronic to get smooth bass, right focus on the mid range and bright and defined treble.ElectronicsThe Kimandu bass features a Markbass custom electronic as well, simple, intuitive and effective even on extreme settings.Controls are VOLUME/VOLUME/TONE (with an active/passive switch on Tone) letting an incredible pickups blending capability compared to a regular Blend control and with active BASS/MID/TREBLE… so ’re not going to have resounding bass or blowing treble. The frequency values have been chosen to offer a wide range of tones that can use on any setting. The TONE control (working also in the passive mode) has been defined by Richard as the “G Point” because of its accurate efficacy letting to move from smooth and warm tones to bright and hi-fi ones, everything in a one of a kind “sensual” way.Includes gig bag.
Markbass CMD JB Players School 200W 1x15 Bass Combo Amp Black
Dimensions (Overall): 22.05 inches (L), 19.7 inches (H) x 20.08 inches (W) x 22.05 inches (D)Weight: 42.5 poundsStyle: ComboWattage Output: 200 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Speaker Size: 1 x 15" & bull; Tweeter: None & bull; Speaker Power Handling (AES Standard): 200 W RMS & bull; Frequency Responce: 40 Hz to 5 kHz & bull; Sensitivity dB SPL: 100The CMD JB Players School combo, named after Jeff Berlin's great Music School, is a great choice for students. Markbass knows how important it is for students to practice and play with a good professional sound, as well as to have a compact, light and portable combo. This combo is the smart choice to satisfy all of these requests. It's inexpensive, it features the same quality standard and the same quality control tests applied to all Markbass products by their technicians during production. Jeff says, "The CMD JB Players School combo combines Markbass' usual great tone with a high quality amp cabinet that is affordable. I am only insterested in an amp if it has good tone built into it. This amp has it! I can practice with this amp and I can gig with it as well." The CMD JB Players School combo has a highly-portable size, and it weighs only 34.61 lbs. Its sound is professional, and like all Markbass rigs, getting the right sound is as simple as setting the amp flat, plugging in, and turning up the volume. EQ only needs to be used when compensating for unusual venue acoustics. Both student and professional users deserve a great professional sound, and this combo is the choice!
Markbass Evo1 500W Bass Amp Head
Dimensions (Overall): 18.9 inches (L), 7.87 inches (H) x 14.96 inches (W) x 18.9 inches (D)Weight: 10.5 poundsStyle: HeadWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power: 500W & bull; Two channels (with mix) & bull; Two inputs & bull; Impedance: 4, 8 ohms & bull; Controls: 3-band EQ, level, amp select, FX level, mix level, master level, headphone level, boostThe Markbass EVO1 head is the result of the mix between classic and advanced technology evolution to allow bassists to have not only just a gorgeous bass sound, but always the right sound, no matter which genres and techniques 're playing. It offers six amp tone choices for each of the two channels, clean and distorted.Bass players have always been inspired by the possibility to mix two amplifiers tones and to blend clean and distorted sounds as Jaco Pastorius did back in the years. With the Markbass EVO 1 that's possible, opening many more sound options experimenting two amps playing simultaneously.Both channels feature classic standard amp controls interface and one effect each ( can update amps and effects picking and downloading favorite ones from the Markbass website), MIDI In port, on board tuner, aux in and headphones out, FX loops, XLR line outs, and a powerful 500W MPT (Mark Proprietary Technology) power amp.
Markbass Standard 151HR Rear-Ported Neo 1x15 Bass Speaker Cabinet 8 Ohm
The Markbass Standard 151HR is a bass speaker cab that will never leave you lacking in the the bottom end department. The Standard 151HR bass cabinet's 15 in. custom speaker gives you a deep, classic sound that suits many musical styles. This cab can be used on its own, but combining it with a Markbass Traveler 102P or Standard 104HR makes for one powerful stack. So plug the Markbass Standard 151HR bass cab in and prepare to rock.
Markbass Standard 121 HR 400W 1x12 Bass Speaker Cab
The Markbass Standard 121 HR is a 1x12 rear-tuned ported cabinet with a warm, focused and natural sound. It’s a perfect choice for many stage situations as its wedge design allows to use it either as a floor monitor or on its side in standard position. With its 400W of power handling it can be used as a standalone with a Markbass head or as extension cabinet for the company's top-selling Mini CMD 121P combo, it’s a versatile and very portable solution (weighs only 29.1 lb. / 13.2 Kg) that covers all of your needs and also ideal for double bass and acoustic bass as sound the of acoustic instruments is faithfully reproduced by this amazing cabinet.
Markbass Little Mark III and New York 151 Bass Stack
Dimensions (Overall): 1.0 inches (L), 1.0 inches (H) x 1.0 inches (W) x 1.0 inches (D)Weight: 54.29 poundsStyle: StackWattage Output: 300 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 4-band EQ for precise tonal control & bull; Balanced input for acoustic basses & bull; Balanced DI with level control and prepost switchFor bass renegades comes a deal that will make smile. From Markbass comes an amazing amplifier package, featuring the Little Mark III bass amp head and the New York 151 bass speaker cabinet, offering plenty of oomph and pro sound features in a lightweight and highly portable amp head and stack. Little Mark III Bass Amp Head - The Little Mark III amp head's DI input features a pre/post EQ switch and output level control, so can optimize the signal send to mixer or recording unit. All this capability comes in the same compact size and weight as its Markbass predecessor. Weighing just over 6 pounds, it puts out 300W at 8 ohms and 500W at 4 ohms. The Markbass amp's 4-band EQ offers precise tonal control while a Variable Pre-shape Filter, Vintage Loudspeaker Emulator), balanced input for acoustic basses, balanced DI with level control, and pre/post switch make the Markbass Little Mark III a totally pro amp head. New York 151 Bass Speaker Cabinet - Part of Mark Bass' New York bass speaker cab, this little powerhouse is the perfect extension for either the Mini CMD 151P combo or the CMD 151P Jeff Berlin combo. The bass speaker is also a great lightweight option for combining with any 500W Markbass amp. This Markbass speaker series is named after the world's most famous city, where bassists often lug their rigs by subway or taxi to get to gigs. Because of this issue, Markbass set out to create a combo amp that had the power, but not the bulkiness of a regular bass combo. The end result speaks for itself. The sound of this bass speaker cabinet is smooth and warm, with sweet full range and a deep tone that extends down to 40Hz. The Markbass New York 151 bass speaker cabinet features one 15" speaker, with 400W of power handling.
Markbass Marcus Miller CMD 101 Micro 60 60W 1x10 Bass Combo Amp
The Marcus Miller CMD 101 Micro 60 60W 1x10 bass combo is not just a practice amp; the sound quality delivered by this 60W small combo is truly impressive. It's a great choice for small gigs and recording and, thanks to the balanced output, you can connect it to a mixer/PA to use it as a small personal monitor. The compact combo amp section also features gain and master controls, 3- band EQ, aux in, headphone out, speaker on/off switch. Portability and Great SoundThis is one of the most compact and lightweight (only 25.35 lbs / 11, 5kg) combo on the market, and delivers incredible bottom end and great sound quality for its size. Now you can get great tone in a very compact package, with fantastic portability. Simple and Effective ControlsThe simple and effective 3- band EQ controls section gives you lots of tonal freedom, which allows you to easily tailor your sound. External Speaker CapabilityThe Marcus Miller CMD 101 Micro 60 can be connected to an 8 ohm extension cabinet, giving you a louder rig. It can be used also for small gigs and recording. And thanks to the balanced output, you can connect it to a mixer/PA and use it as small personal monitor. Headphone Out, Aux. InThe amp section includes a headphones output, and an aux. input for iPod or MP3 players. A switch on the rear panel turns off the speaker so you can practice anywhere and anytime you like.
Markbass MB Kimandu F1 Old White
Dimensions (Overall): 54.0 inches (L), 7.25 inches (H) x 18.75 inches (W)Weight: 16.79 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 5Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Val di Fiemme spruce body & bull; Flat sawn maple neck & bull; Plain maple fingerboard & bull; Markbass Ultralight Custom tuners & bull; Markbass Custom Soapbar pickupThe MB Kimandu F1 is a more affordable but no less impressive version of the MB Kilimanjaro. This 5-string bass is made of a lightweight Italian spruce body, flat sawn maple neck and flamed maple 24-fret fingerboard, giving it an impressive durability and resonance. Equipped with a Markbass soapbar pickup for a smooth bass sound, the MB Kimandu F1 bass features the same electronics as the Kilimanjaro for an incredible price.
Markbass Marcus Miller 102 400W 2x10 Bass Speaker Cabinet
Dimensions (Overall): 25.99 inches (L), 21.29 inches (H) x 24.75 inches (W) x 25.99 inches (D)Weight: 49.5 poundsStyle: CabinetWattage Output: 400 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power handling: 400W RMS & bull; Speakers: 2x10" Markbass custom; 1" voice coil tweeter & bull; Crossover frequency: 3.5 kHz & bull; Frequency response: 40Hz–20kHz & bull; Dimensions: 23.38" x 18.93" x 20.39" (59.4 x 48.1 x 51.8 cm)This amazing cabinet is a top choice for bass players who need a smaller, pro-sounding rig.The 2x10” Markbass custom speakers pack an impressive punch, and the new 1” voice coil tweeter gives very focused highs with excellent transient attack. The wedge design allows the cab to be used either as a floor monitor or in standard vertical or horizontal position.Power Handling and Light WeightLike all Markbass cabinets, the Marcus Miller cabs feature Markbass ultra-light neodymium custom speakers. The 102 CAB weighs only 40.34 lb. (18.3kg) with 400 watts (RMS) of power handling.Controlled Bottom EndThe rear-ported design offers a full, controlled bottom end. And the new special 1” Voice Coil tweeter featured on these signature cabinets is very focused in high range with excellent transient attack.It's great for any kind of tone and technique — slap, grooves, fast finger work as well as for detailed, melodic playing.Wedge DesignThe angled cabinet design allows to use these cabinets either as a floor monitor or in standard vertical position. The angled position is fantastic in applications where amp is mostly for personal monitor hearing self perfectly on stage, and the soundman wants to have as much control as possible of the PA sound from the front of house, without a lot of sound coming off the stage.Use as Stand-Alone or PairThese cabinets work great on their own, but are also a great choice for those who like to combine cabinets. 8 ohm cabinet allows for many stack combinations: two 104 CABs, two 102 CAB or a mix of 104 CAB and 102 CAB offer great versatility. can bring one when only need one, and bring two when want to really make a super stack for the biggest venues, and the loudest bands!
Markbass Rack Ear Kit for F1
Dimensions (Overall): .49 inches (L), .39 inches (H) x .39 inches (W) x .49 inches (D)Weight: 1.2 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, These Markbass rack ears are specifically designed for use with the Markbass F1 bass amp head. 2-piece set allows to mount amplifier into one unit of any standard rack case.
Markbass Classic 152 SH 800W 2x15 Bass Speaker Cabinet
Dimensions (Overall): 35.5 inches (L), 21.75 inches (H) x 26.54 inches (W) x 35.5 inches (D)Weight: 72.25 poundsStyle: CabinetWattage Output: 800 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power handling: 800W & bull; Speakers: 2x15" woofers; 1" tweeter & bull; Impedance: 4 ohm & bull; Crossover frequency: 3.5 kHz & bull; Frequency response: 50Hz–20kHzTwo 15s are the right choice if want to move a lot of air. It’s a fantastic solution for rock and pop but this cabinet gives the old-school a solid upgrade. The sound is deep and warm but its great clarity, definition and incredible fast attack make it suitable for any kind of genre and technique. Just listen to Stu slap tone coming from it and ’ll change mind about 15” speakers. There are not many 2x15” cabs on the market, partly because of the typical 15” drivers lack of definition limiting their range of application. But with the Markbass Classic 152 SH, this configuration is now an available choice for a wider population of bass players, not only rock-reggae-dub bassists but even for slap lovers. Not for nothing, Stu has chosen this speaker configuration for his complex and articulate technique.
Markbass Nano Pocket Bass Guitar Bag
Dimensions (Overall): 50.75 inches (L), 3.25 inches (H) x 17.5 inches (W)Weight: 6.36 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Bass GuitarWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, Markbass bass bag with pocket for Nano Mark 300 and other compartments for accessories (cables, music sheet, tuner, strings etc).
Markbass MB Mini Boost Compact Boost Effects Pedal For Bass
Dimensions (Overall): 5.7 inches (L), 2.7 inches (H) x 5.6 inches (W) x 5.7 inches (D)Weight: 1.0 poundsEffect Type: Bass EffectsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Input: mono 1?4" jack & bull; Input impedance: 1 Mohm 6 Vpp & bull; Output: mono 1?4" jack & bull; Output impedance: 470 ohm 6 Vpp & bull; Boost Gain Level: from 0 to +20 dBThe MB Mini series of pedals from Markbass is made to the same high quality level as their standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means can use them with any standard power supply.Give pedal board a "boost" with the MB Mini Boost-which also features Variable Preshape Filter (boosts lows and highs, and cuts mids). The MB Mini Boost allows to boost signal level by up to +20dB, to instantly give more clean headroom whenever need it. The VPF filter gives the option to cut midrange while boosting lows and highs, for clean attack and a bottom-heavy slap sound. MB Mini Boost offers first-rate professional features and exceptional sound quality in an ultra-compact, lightweight chassis, smaller and lighter than other stompboxes. Its standard 9-12V voltage allows to power it with most common pedal board power supplies. Like all Markbass pedals, the MB Mini Boost features "true bypass": that means that when the distortion is "off", signal goes directly from the input jack to the output jack without any degradation of audio quality. The MB Mini Boost features high-quality components for top sound quality, and is 100% Made in Italy.
Markbass Gold Bass Gold
Dimensions (Overall): 53.25 inches (L), 7.0 inches (H) x 18.5 inches (W)Weight: 17.75 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 4Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Neck & bull; Shape: C & bull; Wood: Maple & bull; Neck joint: Bolt-on & bull; Scale length: 34 in.The Markbass team put all their experience and market knowledge on this model design to concentrate into a single instrument all the most sought after features by a high percentage of bassists. It’s a real example of balance, simplicity and functionality, added to a nice design reminding something vintage, but still leaving total expression to any bass player.WoodsBody: for this “P” style body Markbass had to chose selected alder, one of the most used wood for vintage style basses thanks to its balanced tone, fast attack, controlled sustain and light weight. Its particular grain enhances the amazing GOLD finish.Neck: hard maple, Vintage Yellow Glossy finish with flat cut. The C profile and reduced nut width in a pure vintage style make playing really comfortable and its two ways truss rod on the headstock let ultra precise adjustments even with really low action settings.Fingerboard: Pau Ferro, 34" scale, 20 frets with vintage cream binding, bone nut and MOP block inlays.HardwareCustom gold machine heads, F Style | 20:1 ratio, ultra light, precise and reliable. Die cast gold bridge, lightweight, simple and functional in a perfect vintage style.PickupsSingle coil J style passive pickups custom designed on Markbass specs, perfectly matching Markbass electronic, 70’ style lat. Getting “J” style pickup and neck on a “P” style body is a dream for many players… a Golden dream became true.ElectronicThe designers couldn’t choose better electronics than the Markbass for this instrument. VOLUME/ VOLUME/TONE controls a definitely the best to manage the J/J pick up configuration and the TONE control (working also in the passive mode) lets the player move from Jaco or Motown style tones to more modern and open sounds. BASS/MIDDLE/HIGH controls on the active EQ section add a modern character to this vintage flavored instrument, delivering a balanced and defined tone even using extreme settings.Includes gig bag.
Markbass Legacy Series Nickel Plated Steel Electric Strings (9-46)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Legacy Series Strings are made of high quality selected nickel-plated steel wire that is wound on a hexagonal high carbon content core with high quality breaking strength steel. These strings offer classic brilliant warm tone and excellent tuning, giving a full spectrum of sound suitable for any style of playing.
Markbass Mini CMD 121P Amp Head Cover
Dimensions (Overall): 18.6 inches (L), 2.5 inches (H) x 18.25 inches (W)Weight: 2.05 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Outer layer: Polyester 600D x 600D PVC & bull; Padding material: PUR Foam 10mm & bull; Lining material: Nylon 190T PUKeep Markbass Mini CMD 121P amp head protected with this cover made from polyester, foam and nylon.
Markbass Solo Series Stainless Steel Electric Guitar Strings (9-46)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Solo Series Stainless Steel Electric Guitar Strings are made of exclusive corrosion-resistant alloy steel wire that is wound on a hexagonal high carbon content core and they offer a super bright, harmonic, rich tone. These reliable, easy-to-tune strings magnify the tonal character of guitar from the very first note.
Markbass Evo1 500W Bass Amp Head
The Markbass EVO1 head is the result of the mix between classic and advanced technology evolution to allow bassists to have not only just a gorgeous bass sound, but always the right sound, no matter which genres and techniques you're playing. It offers six amp tone choices for each of the two channels, clean and distorted. Bass players have always been inspired by the possibility to mix two amplifiers tones and to blend clean and distorted sounds as Jaco Pastorius did back in the years. With the Markbass EVO 1 that's possible, opening many more sound options experimenting two amps playing simultaneously. Both channels feature classic standard amp controls interface and one effect each (you can update amps and effects picking and downloading your favorite ones from the Markbass website), MIDI In port, on board tuner, aux in and headphones out, FX loops, XLR line outs, and a powerful 500W MPT (Mark Proprietary Technology) power amp.
Markbass Legacy Series Nickel Plated Steel Electric Strings (9-42)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Legacy Series Strings are made of high quality selected nickel-plated steel wire that is wound on a hexagonal high carbon content core with high quality breaking strength steel. These strings offer classic brilliant warm tone and excellent tuning, giving a full spectrum of sound suitable for any style of playing.
Markbass Little Mark 800 Bass Amp Head
Dimensions (Overall): 15.5 inches (L), 7.8 inches (H) x 14.4 inches (W) x 15.5 inches (D)Weight: 9.05 poundsStyle: HeadWattage Output: 800 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 1 14" input, & bull; 1 XLR or 14" input & bull; Gain controls for each input & bull; Master Volume & bull; Line Out LevelWith an 800W digital power amp driving this beast, the Markbass Little Mark 800 bass amp head will satisfy any thirst for power. This high-power head is created for those who need simple, intuitive, and effective controls but also like to have a large supply of power and serious headroom. A great choice for big-stage applications, and for louder bands, its sound is exceptionally warm and clear, both at low and high volumes. The ultra-fast response of the digital power amp allows the best reproduction of every minute detail in playing. The DI output features a pre-post EQ switch and output level control, so can optimize the bass amp head's signal to the mixer or recording unit. In addition, a bonus XLR balanced input is included for amplifying most double bass microphones or pickups. The Markbass Little Mark 800's small size allows for easy transportation, but its sound is nothing short of professional. The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter (VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. Additional features on this bass amplifier head include four bands of equalization, line out control, and pre-post EQ switch for the XLR line out (on the rear panel).
Markbass Solo Series Stainless Steel Electric Guitar Strings (10-46)
Dimensions (Overall): 10.63 inches (L), 10.63 inches (H) x 10.63 inches (W)Weight: 9.04 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, The Markbass Solo Series Stainless Steel Electric Guitar Strings are made of exclusive corrosion-resistant alloy steel wire that is wound on a hexagonal high carbon content core and they offer a super bright, harmonic, rich tone. These reliable, easy-to-tune strings magnify the tonal character of guitar from the very first note.
Markbass Amp Bag Large
Dimensions (Overall): 16.5 inches (L), 2.5 inches (H) x 15.0 inches (W)Weight: 2.2 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; For use with SA450, SD800, TA501, TA503, and R500 amp heads & bull; Padded case & bull; Knapsack shoulder straps & bull; Carrying handles & bull; Pouch with zipper for cables and other smaller accessoriesThis padded case is a convenient, protective housing solution for MarkBass' SA450, SD800, TA501, TA503, and R500 amp heads. It includes comfortable knapsack shoulder straps, carrying handles, and a handy pouch for extras like cables, charts, tuners, etc. The amp can even stay in the bag during use.
Markbass Marcus Miller CMD 103 500W 3x10 Bass Combo Amp
Dimensions (Overall): 25.98 inches (L), 18.72 inches (H) x 22.97 inches (W) x 25.98 inches (D)Weight: 70.0 poundsStyle: ComboWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power: 500W & bull; Two footswitchable channels & bull; Single input & bull; Speakers: 3x10" Markbass custom; 1" tweeter & bull; Impedance: 6 ohmsAlthough it’s the biggest combo of Marcus signature series, the Markbass Marcus Miller CMD 103 is still portable—and it’s the perfect choice for players who want a great tone and high power with the amazing clear definition, punch and dynamic of the Little Marcus 500W head in a compact and versatile 3x10” combo.Great SoundThis combo is a unique contribution to the bass amp market. Designed for players who want great sound and high power from a compact, versatile combo, this professional-quality unit has an impressively big sound.Unique 3x10" DesignThe 3x10” innovative cab design is the mid-way choice between a 2x10” and a 4x10”, offering a very balanced sound, power, weight and size—it’s perfect for any bass player!400W of Power at 6 OhmsThis combo features a 6 ohm cabinet, giving the advantage to draw more power from the power amp (400W).1” Voice Coil TweeterThe 1” voice coil tweeter featured on this combo has been chosen after many comparative tests. It is very focused in the high range with excellent transient attack and it delivers smooth and crispy highs that are never harsh or brittle.Practical ChoiceIn many cases, don’t want the inconvenience of a separate head and cabinet. The Marcus Miller CMD 103 has a big sound as well as the one-piece simplicity of a combo.
Markbass MB RB KILIMANJARO F1 5-String Natural
Dimensions (Overall): 54.0 inches (L), 7.0 inches (H) x 18.5 inches (W)Weight: 20.03 poundsHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 5Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Val di Fiemme spruce body and Abruzzo olive top & bull; 1-piece sawn maple neck & bull; Flame maple fingerboard with 24 frets & bull; Bartolini pickupsThe MB RB Kilimanjaro F1 5-String from Markbass delivers the towering tone worthy of being named after the highest peak in Africa. Designed step by step with Richard Bona, the Kilimanjaro Bass features a Val di Fiemme spruce body for elasticity and unique resonance, along with an olive top and a durable maple neck and fingerboard. Equipped with Bartolini pickups for a classic bass sound, the Kilimanjaro F1 is powerful, comfortable bass with quality electronics.
Markbass Kimandu 5 Richard Bona Signature 5-String Bass Green
Dimensions (Overall): 53.5 inches (L), 7.0 inches (H) x 18.5 inches (W)Weight: 18.99 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 5Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Neck & bull; Shape: D & bull; Wood: Maple & bull; Neck joint: 5-Bolt & bull; Scale length: 34 in.The actual hard thing while talking about this version is focusing the differences with the Hi-End one, having the Kimandu bass the same charm, same design and same product philosophy, keeping the same main features, but using a production process letting MarkBass offer it at an incredible price.WoodsBody: MarkBass chose a two-piece alder body, one of the most used wood thanks to its round and sparkling tonal characteristics, still keeping a standard weight. Body and matching headstock are Green painted, a color enhancing the design charm and that is also a trademark of the whole Ninja series.Neck: Canadian maple with flat cut and two graphite bars to offer maximum stability, with a pretty comfortable profile and dual action truss rod adjustable on the headstock.Fretboard: Maple, 34" scale, 24 ultra carefully refinished frets and black GraphTech nut.HardwareOn the Kimandu version they’ve chosen high quality custom machine heads, 20:1 ratio, ultra light, precise and reliable. MarkBass picked a high quality Custom bridge as well with zinc saddles wrenched on the bridge base to get the best sustain and sound transfer.PickupsThe Kimandu version soapbar pickups have been custom built on Markbass specs to perfectly match our electronic to get smooth bass, right focus on the mid range and bright and defined treble.ElectronicsThe Kimandu bass features a Markbass custom electronic as well, simple, intuitive and effective even on extreme settings.Controls are VOLUME/VOLUME/TONE (with an active/passive switch on Tone) letting an incredible pickups blending capability compared to a regular Blend control and with active BASS/MID/TREBLE… so ’re not going to have resounding bass or blowing treble. The frequency values have been chosen to offer a wide range of tones that can use on any setting. The TONE control (working also in the passive mode) has been defined by Richard as the “G Point” because of its accurate efficacy letting to move from smooth and warm tones to bright and hi-fi ones, everything in a one of a kind “sensual” way.Includes gig bag.
Markbass Standard 104HF Bass Cabinet Cover
Dimensions (Overall): 20.0 inches (L), 3.5 inches (H) x 19.0 inches (W)Weight: 3.3 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Outer layer: Polyester 600D x 600D PVC & bull; Padding material: PUR Foam 10mm & bull; Lining material: Nylon 190T PUKeep Markbass 104HF bass cab protected with this cover made from polyester, foam, and nylon.
Markbass Little Marcus 500 Marcus Miller Signature 500W Bass Amp Head
Dimensions (Overall): 15.3 inches (L), 7.65 inches (H) x 13.7 inches (W) x 15.3 inches (D)Weight: 7.41 poundsStyle: HeadWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power: 500W & bull; Two channels & bull; Single input & bull; Controls: Ultralow, low, mid, high mid, high, Old School, Millerizer, gain, volume, mute switch, prepost EQ switch & bull; Speaker outputMarcus Miller is renowned for his groundbreaking style and trademark sound, and Marco De Virgiliis is considered an innovator for introducing lightweight, portable, powerful and great-sounding bass heads and cabinets. The Markbass Little Marcus amps are the result of the meeting of these groundbreaking roads. For Marco, it was exciting working and developing an amp for Marcus, as since the moment he started building his very first amp, he has been thinking about him. It's not just an endorsement but it is dream coming true. And as Marcus says, "A lot of people have ideas, but being able to achieve the idea it's a whole another thing."Marcus has close partnered with Marco to develop his amazing signature amps that not let just sound like him, but they are able to cover all the different tones in need, without limits.The Little Marcus in fact not only suits Marcus' needs and taste, but is a great choice for every bassist who needs an amp with an amazing clear definition, punch and dynamic, respecting the priority of tone like all the Little Mark heads. It offers simple and very effective controls on EQ1 to tailor sound for any kind of genres and styles, and the two new Old School and Millerizer filters featured on EQ2 tailored together with Marcus allows to quick obtain a vintage tone or an amazing slap sound.The Little Marcus from Markbass features 500W of power output at 4 ohms (300 at 8 ohms), with two EQ channels. Channel 1 features controls for ultralow, low, mid, high mid and high, while Channel 2 is more streamlined with controls for Old School and Millerizer.
Markbass Mini CMD 121P 1x12 Bass Combo Amp
Dimensions (Overall): 18.0 inches (L), 17.0 inches (H) x 17.9 inches (W) x 18.0 inches (D)Weight: 32.35 poundsStyle: MiniWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Solid state preamp & bull; 12" Markbass custom speaker & bull; Piezo tweeter & bull; Rear bass reflex & bull; Made of high-grade, multi-ply poplarThe Markbass Mini CMD 121P is a bass combo amplifier that gives fat sound with electric or acoustic basses. That makes the Mini CMD 121P amp perfect for rehearsal studios or small club applications. The Markbass Mini CMD 121P comes with a built-in Little Mark II bass head in the top rear area. Bassists will appreciate the Markbass-designed Vintage Loudspeaker Emulator and Variable Pre-shape Filter which help give this Mini CMD a warm natural sound. The Little Mark II also has a Neutrik Speakon combo jack output that accepts both Speakon or 1/4" speaker cable as well as a second 1/4" speaker out jack so can hook up to another 8 ohm cab for a 500W rig. 'll also find a balanced XLR out, unbalanced tuner out so can tune as play without passing signal through pedals. A Send and Return Effect loop protects from losing signal if one of pedals dies or a cable in the chain gives out.
Markbass Standard 108HR 1200W 8x10 Bass Speaker Cabinet Black 4 Ohm
Dimensions (Overall): 47.48 inches (L), 21.42 inches (H) x 26.54 inches (W) x 47.48 inches (D)Weight: 118.61 poundsStyle: CabinetWattage Output: 1200 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Impedance: 4ohms & bull; Bass speaker size: 8x10" & bull; Bass ports: rear & bull; Tweeter: 1" compression driver with custom horn & bull; Power handling: 1600W RMS (AES Standard)The legendary 8x10 bass speaker cabinet was always the heaviest piece of gear a band ever had to carry. However, technology developed by Markbass, has brought forth a new era of lightweight bass gear. And best of all, the heaviness of the sound has not been sacrificed along the way. The Markbass 108HR speaker cabinet weighs in just under 90lbs, an unbelievably light weight for an 8x10 bass enclosure. With a monstrous 1600 watts of power handling, this bass speaker cabinet can get as loud as need it. The cabinet is rear-ported, offering a bass tone that swells with warmth and boldness, while the Markbass 108HR's compression driver with custom horn keeps tone beautifully defined.
Markbass Traveler 102P Cabinet Cover
Dimensions (Overall): 23.0 inches (L), 4.0 inches (H) x 20.0 inches (W)Weight: 2.85 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Outer layer: Polyester 600D x 600D PVC & bull; Padding material: PUR Foam 10mm & bull; Lining material: Nylon 190T PUKeep Markbass Traveler 102P speaker protected with this cover made from polyester, foam, and nylon.
Markbass New York 121 D2 400W 1x12 Bass Speaker Cabinet Black
Dimensions (Overall): 22.0 inches (L), 19.5 inches (H) x 20.75 inches (W) x 22.0 inches (D)Weight: 39.05 poundsStyle: CabinetWattage Output: 400 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power handling: 400W & bull; Speaker: 1x12”; 1” voice-coil tweeter & bull; Crossover Frequency: 3.5 kHz & bull; Frequency Responce: 41Hz to 20KHz & bull; Sensitivity: 99 dB SPLThe Markbass New York 121 D2 400W 1x12” bass speaker cabinet sounds deep and warm, thanks to its more generous dimensions, while remaining light and portable. Plus, it features a 1" voice-coil tweeter in straight position with incredible clarity and definition.
New York 121 D2 is a great choice for 12" lovers that also like to have full sound and old-school vibes. Highs are sweet and round, the upper mids have loads of presence, and the low mids have a warmth that sweeps evenly into a solid bottom end. Also, its size perfectly stacks with the New York 151 cabinet allowing for new speaker configuration stack options. And the lightweight construction makes it highly portable, at just 34.8 lb (15.8 kg).
Warm, Full Tone
Larger size of New York 121 D2 gives a punchy, full and deep tone, as if the speaker was much bigger than 12".
1" Voice Coil Tweeter and Level Control
The 1" voice coil tweeter in straight position gives sweet and round highs, with incredible definition and clear tone and not at all harsh at higher volumes. As for other Markbass cabinets there's a tweeter level attenuator conveniently located on the side of New York 121 D2. This allows to control the tweeter output as stand in front of the cabinet to listen to the sound.
Light Weight
Weighing in at a mere 34.8 lb (15.8 kg) this cabinet is another easy 'one man lift' – in fact it can be put in a bass bag on back with all the leads in, amp head in one hand and pretty much the cabinet in the other.
Use as a Stack
This cabinet stacks with the New York 151 cabinet, offering new speaker configuration stack options.
Perfect for Electric and Acoustic Basses
This exceptional cabinet is perfect with electric bass, but it's also ideal for double bass and acoustic bass since the sound of acoustic instruments is accurately reproduced by this amazing cabinet.
Markbass Little Mark Vintage 500W Bass Amp Head
Dimensions (Overall): 15.3 inches (L), 8.0 inches (H) x 13.75 inches (W) x 15.3 inches (D)Weight: 7.54 poundsStyle: HeadWattage Output: 500 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power: 500W RMS @ 4 ohms 300W RMS @ 8 ohms & bull; Controls: 4-band EQ, gain, pre-post-EQ switch, FlatCutOld 3-way switch, limiter, volume & bull; FX loop & bull; Tuner output & bull; Speaker out: 14" Speakon comboThe Markbass Little Mark Vintage 500W bass amp head is designed to let find ideal tone, regardless of style.
This is part of the Gold Series, a state-of-the art lineup offering superior quality — starting from gold plated circuits, to the specifically selected components, to some of the most requested features.Tube Preamp
The Little Mark Vintage features a tube preamp, to get rich and warm tone full of harmonics.Limiter Control
This control offers a modern feel when set it all the way up, or vintage response when rolled back. It creates that old generation feel with its typical distortion get when the Limiter effect is really low.New EQ setting
The 4-band EQ of the Little Mark Vintage is tuned to offer a rich, balanced tone that easily cuts in the mix.Real DI box
The balanced DI out with transformer is optimized to give pure, full, rich, linear sound on all frequencies. Although Little Mark amp heads already feature high-quality DI circuitry, the transformer upgrades the DI performance offering a real DI box inside the head, handling extreme transients without introducing any distortion or coloration.Gold Line Top Features
As it happens in the Gold Line series, the Little Marcus Vintage features gold plated circuits and top-quality components, providing the purest and cleanest sound can imagine.
Mute and ON/OFF EQ
Footswitchable mute is one of the most requested features in order to tune or switch an instrument silently. The optional Dual Footswitch also allows to turn on/off the EQ section.Size/Weight
The Little Mark Vintage features the compact size and light weight of other Little Mark heads, bringing massive bass tone in just over 5 lb.
Markbass Traveler 151P Rear-Ported Compact 1x15 Bass Speaker Cabinet 8 Ohm
The Markbass Traveler 151P is one of the smallest, lightest 15" bass speaker cabs on the market. Putting power and pro sound into a very practical package, the Marbass Traveler 151P is an ideal bass cab for club gigs, especially in pairs. 151P bass speakers can also be stacked with any of Markbass' Standard Series cabinets for even more quality sound. The Markbass Traveler 151P speaker cabinet's high-grade, multi-ply poplar shell design and the Markbass custom woofer add up to a sturdy combination that is shockingly lighter than its peers.
Markbass MB RB KILIMANJARO 4 Natural
Dimensions (Overall): 54.0 inches (L), 7.0 inches (H) x 18.25 inches (W)Weight: 20.49 poundsSize: FullHand orientation: Right-HandedInstrument body construction: SolidNumber of strings: 4Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Lightweight swamp ash body with figured maple top & bull; 1-piece quarter sawn maple neck & bull; Flame maple fingerboard with 24 frets & bull; Gotoh tuners & bull; Hipshot bridgeNamed after the highest peak in Africa, the MB RB Kilimanjaro 4 from Markbass delivers big sound and towering power. This 4-string bass features a lightweight swamp ash body with a figured maple top and a 1-piece quarter sawn maple neck with a 24-fret flame maple fingerboard, giving it impressive durability and resonance. Equipped with a Bartolini MK4CBC pickup, the MB RB Kilimanjaro bass balances a warm sound with an ergonomic design.
Markbass MB Mini Dist Compact Bass Distortion Effects Pedal
The MB Mini series of pedals from Markbass is made to the same high quality level as their standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means you can use them with any standard power supply. Based on the Markbass Bass Tube Marker, the MB Mini Dist offers many improvements as well as two tone controls to customize your grit. The MB Mini Dist supplies natural amp-like distortion, ranging from sweet overdrive to wild distortion tones. It has very dynamic, touch-sensitive response, a large output range and a wide range of tonal nuances thanks to the two tone controls. Its versatility makes it useful for any musical style. MB Mini Dist offers first-rate professional features and exceptional sound quality in an ultra-compact, lightweight chassis, smaller and lighter than other stompboxes. Its standard 9-12V voltage allows you to power it with most common pedal board power supplies. Like all Markbass pedals, the MB Mini Dist features "true bypass": that means that when the distortion is "off", your signal goes directly from the input jack to the output jack without any degradation of audio quality. The MB Mini Dist features high-quality components for the best sound quality, and is 100% Made in Italy.
Markbass Markbass Groove Series Electric Bass Nickel Plated Steel Strings (30 - 130) Medium Gauge
Dimensions (Overall): 6.1 inches (L), .66 inches (H) x 6.1 inches (W)Weight: .39 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Made from high-quality selected nickel-plated steel wire & bull; Hand-wound on hexagonal high carbon content core from the master string makers at Markbass & bull; Calibrated diameter and tension for best tone and feel & bull; Great for bassists who love a traditional warm nickel soundThe Groove series bass strings are made of high-quality selected nickel-plated steel wire. These strings are hand-wound on hexagonal high carbon content core from the master string makers at Markbass, offering calibrated diameter and tension for best tone and feel. These strings are a great choice for bassists who love a traditional warm nickel sound. Markbass strings are made from their factory in Abruzzo, Italy—where the art of string-making was born—using the best selected innovative materials and ultimate quality controls matched with the ancient tradition of master string makers. The artistry and know-how of string-making in Abruzzo have been exported worldwide, offering a superior product with exceptional performance, amazing feel, intonation and reliability.
Markbass Bass Keeper Strap
Dimensions (Overall): 5.8 inches (L), 1.8 inches (H) x 4.5 inches (W)Weight: .15 poundsPackage Quantity: 1Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Attaches to handle or side of cab & bull; easy closure straps go around neck of bassNever again do have to worry about leaning bass against cab only to have it bumped and losing favorite axe when the neck cracks from the fall. With the Bass Keeper strap, when 're not using guitar, it's securely fastened with easy closure straps that attach to the side or handle of cab and around the neck of the guitar. It'll comfortably rest there so can rest easy too. It's also a great way to store back up bass during a gig.
Markbass Large Rack Ears Kit
Dimensions (Overall): 4.9 inches (L), 3.8 inches (H) x 4.0 inches (W) x 4.9 inches (D)Weight: 1.0 poundsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Mounts the following amps: & bull; SA450 & bull; SD800 & bull; TSA500 & bull; TA501These large rack ears allow to mount Markbass SA 450, SD 800, TSA 500, TA 501, TA 503, Studio Pre 500 or R 500 amplifier into one unit of any standard rack case.
Markbass CMD 102P Bass Combo Cover
Dimensions (Overall): 22.6 inches (L), 4.1 inches (H) x 19.8 inches (W)Weight: 2.3 poundsClosure Type: ZipperBag Structure: HardsideCompatible With: Most AmplifiersWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Outer layer: Polyester 600D x 600D PVC & bull; Padding material: PUR Foam 10mm & bull; Lining material: Nylon 190T PUKeep Markbass CMD 102P bass speaker protected with this cover made from polyester, foam, and nylon.
Markbass Minimark 802 150W 2x8 Bass Combo Amp Black
Dimensions (Overall): 12.6 inches (H) x 18.11 inches (W) x 21.26 inches (D)Weight: 29.7 poundsStyle: MiniWattage Output: 150 wattsWarranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Power: 150w 8 ohm 250w 4 ohm & bull; Speakers: 2 x 8" drivers with piezo tweeter & bull; Cab power handling: 250W RMS & bull; Crossover frequency: 3.5 Khz & bull; Frequency response: 53Hz to 18KhzThe Markbass 150W Minimark solid-state bass combo is even more sonically impressive than its heralded predecessor, with an incredible warm and focused sound thanks to the two 8" custom woofers and an onboard piezo tweeter. The Minimark 802 is a brilliant choice for rehearsing, practicing, teaching and recording, and, with 150W of rumble, it's powerful enough for gigs. It is also ideal for double bass and acoustic bass, with a faithful reproduction of acoustic instruments.
