Buy Hitachi Products online in United States

Hitachi C12FDH 12 in. Dual Bevel Miter Saw with Laser Guide

Dimensions (Overall): 30.72 inches (L), 27.0 inches (H) x 24.63 inches (W)Weight: 67.85 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 12 in. Dual Bevel Miter Saw with Laser Guide - C12 & bull; 12 in. 32T TCT Saw Blade - 726100 & bull; Hex Bar Wrench - 944458 & bull; Dust Bag - 322955 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The C12FDH 12 in. dual compound miter saw with dual bevel features Hitachi's exclusive laser guide system for cutting accuracy. The saw head bevels to the right or left allowing the material to stay securely in place for ultimate cutting efficiency. It cuts various types of wood, crown molding, plywood, decorative panels, soft fiberboard, hardboard and aluminum sashes. After major bevel angle is secured, the micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Exclusive laser guide system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or left of the cut mark depending upon the user's preference. A tall, pivoting aluminum fence that stands at a height of 5-1/8 in. allows crown molding to be cut vertically for convenience. A powerful 15 Amp motor with 1,950 Watts of output power smoothly powers through hardwoods with ease. Powerful 15 Amp motor with 1,950 Watts of output power smoothly powers through hardwoods with ease Miter scale ranges up to 52 degrees, both to the right and left, for a broader range of cuts Bevel scale ranges up to 48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops Laser guide system accurately indicates where the blade will cut on the material, and can be easily adjusted to the right or left of the cut mark depending upon the users preference Tall, pivoting aluminum fence that stands at a height of 5-1/8 in. allows crown molding to be cut vertically for convenience Large base provides better support and balance to prevent material from warping Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life.

Hitachi G12VA 4-1/2 in. 13 Amp Angle Grinder

Dimensions (Overall): 15.2 inches (L), 6.8 inches (H) x 12.4 inches (W)Weight: 7.8 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 4-1/2 in. 13 Amp Angle Grinder - G12VA & bull; Wheel Guard & bull; Side Handle & bull; Spanner Wrench & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Every Hitachi power tool is designed to the highest standards and is rigourously tested for both performance and durability. The Hitachi G12VA 4-1/2 in. 13 Amp Angle Grinder is the lastest in Hitachi professional-grade grinders. With class-leading power at over 1,500 Watts, the G12VA isn't just muscle, it also features a variable-speed switch, an anti-vibration side handle, kick-back protection and a tool-less wheel guard that can be removed if the job calls for it. The low profile, compact design weighs only 4.4 lb. and is excellent for overhead applications and tight spaces. Powerful 13 amp motor produces a best-in-class 1,500 Watts output Variable-speed switch allows the user to determine the best speed for each application Trigger lock-on for comfortable, continuous operation Anti-vibration side handle offers comfort during extended use Kick-back protection quickly shuts off power in the event of a bound wheel, protecting the user and extending the life of the gears and motor Tool-less wheel guard for quick and easy disc changes Lightweight design at 4.4 lbs. to facilitate maneuverability, making this tool excellent for overhead applications.

hts721080g9at00 hitachi travelstar 7k100 hard drive hts721080g9at00

Hitachi 80GB HTS721080G9AT00 7200RPM IDE HARD DRIVE 0A28264 DA1395 3200A2524001 LAPTOP IDE HARD DRIVE 80GB

Hitachi NV83A4 3-1/4 in. Coil Framing Nailer

Dimensions (Overall): 12.41 inches (L), 13.69 inches (H) x 5.41 inches (W)Weight: 10.6 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 3-1/4 in. Coil Framing Nailer - NV83A4 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. An ideal nailer for a variety of applications and jobs Hitachi's NV83A4 Coil Framing Nailer is a lightweight yet durable nailer capable of driving up to 3-1/4 in. full head nails with ease. Two selectable firing modes, rubber molded grip, and hardened safety deliver unprecedented performance. Lightweight design for easy one handed operation Two selectable firing modes - sequential or bump fire - offer users adjustable operation Hardened safety reduces wear for improved longevity and safe use Comfortable rubber-molded handle improves operator control and reduces fatigue.

Hitachi 115455 Angle Grinder Cutting and Tuck Point Dust Collection Shroud

Dimensions (Overall): 3.5 inches (H) x 9.3 inches (W) x 11.5 inches (D)Weight: 1.2 poundsMaterial: PolymerBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Angle Grinder Cutting and Tuck Point Dust CollectiAngle Grinder Cutting and Tuck Point Dust Collection Shroud - 115455 Works with the following tools G18DSL, G12SA3, G12SE2, G12SE2P9, G12SQ, G12SR4, G12SS, G12SS2, G12VA, G12VE, G13SC2, G13SN Designed for use with all stone types Does not accept wheels over 5 in. Use dust extractor with 125+ CFM.

Hitachi C15FB 15 in. Miter Saw

Dimensions (Overall): 25.74 inches (L), 29.75 inches (H) x 19.5 inches (W)Weight: 83.7 poundsBattery Voltage: 115.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 15 in. Miter Saw - C15FB & bull; 15 in. Combo Blade & bull; Wrench & bull; Dust Bag & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi Miter Saw is one of the only 15 in. miter saws available on the market. This model cuts various wood materials, plywood, decorative veneer, soft fiberboard, hardboard and aluminum products such as sash and siding. Electric brake halts the rotation of the blade within seconds Gearcase center beam support provides longer tool life and better cutting accuracy 11 positive stops on miter index Extension guide supports longer stock without warping Depth of cut at 4 3/4 in. x 7-9/32 in. allows molding to be cut standing vertically Dust collector attachment Debris deflection guard safely diverts debris away from the work area Easy carbon brush access.

Hitachi CS51EAP 50.1cc Gas 20 in. Rear Handle Chainsaw

Dimensions (Overall): 12.2 inches (H) x 13.0 inches (W) x 22.0 inches (D)Weight: 17.9 poundsCA Carburetor Law Compliant: YesAssembly Details: Adult Assembly Required, Tools Not ProvidedBlade Length: 20 inchesCutting Width: 20 inchesPower Source: Gas-PoweredBattery: No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 20 in. ChainThe new Hitachi CS51EAP chainsaw is powered by a 50.1cc commercial grade Pure Fire engine. This saw was built for the commercial user who needs to be able to cut large trees quickly. The CS51EAP features a compression release for easy starts, a sprocket nose bar, and a bucking spike to provide superior control and ease of cut. The CS51EAP is also simple to operate with side access chain tensioning and an adjustable oiler. Other features include a half throttle choke with trigger release for easy start and warm up, and tool-less access to the air filter. Depending upon user preference, optional 16 in. and 18 in. bars and chains are also available and sold seperately. 7-year consumer warranty, 2-year commercial warranty and 1-year rental warranty

Hitachi G12SA3 Hitachi G12SA3 4-1/2 in. 8 Amp Grinder

Dimensions (Overall): 16.0 inches (L), 8.0 inches (H) x 10.0 inches (W)Weight: 7.0 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Angle Grinder & bull; Spanner Wrench & bull; Side Handle & bull; Depressed Center Wheel & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The G12SA3 4-1/2 in. grinder deburs diecast product, finishes metal surfaces, grinds welds and torch cut surfaces and groove and cuts concrete. Delivers a powerful 8 Amps with 910 Watts of input power and a class leading 1,900 Watts of output power to grind through the toughest applications with ease Achieves highest overload durability in its class thanks to an improved cooling mechanism and the high output motor for efficiency and higher resistance to burnout Improved dust protection for the motor resists wear on the armature and field coils for longer tool life under the usual harsh conditions On/Off switch mounted on the top allows the user to comfortably operate the tool whether right or left handed A one-touch quick off mechanism provides added safety Easy to manipulate spindle lock located at the front of the grinder makes it simple to change out the accessories as needed Equipped with a side handle that projects forward 70 degrees for a comfortable and secure position when using the grinder for long stretches of time Side handle can be attached to the right or left depending upon the users preference Compact design and short body facilitates maneuverability and ease of use on any worksite.

Hitachi NT50AE2 18-Gauge 2 in. Finish Brad Nailer Kit

Dimensions (Overall): 10.0 inches (L), 9.1 inches (H) x 2.68 inches (W)Weight: 5.25 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 18-Gauge 2 in. Finish Brad Nailer - NT50AE2 & bull; Safety Glasses - 875769 & bull; No Mar Tip - 881751 & bull; Air Fitting & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The lightweight Hitachi NT50AE2 2 in. 18-Gauge Brad Nailer is an ideal tool for small carpentry projects. It features a high-capacity magazine, exhaust vent, easy depth-of-drive adjustments, and a removable nose cap for prolonged tool life. This pneumatic brad nailer will help you tackle everything from cabinet installation and picture-frame assembly to furniture construction and finish work. Accepts 5/8 in. to 2 in. 18-gauge fasteners Selective actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch At only 2.2 lbs., this finish nailer is lightweight and well-balanced making it easy to use all day long Visual nail reload indicator located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided Tool-less easy to clear nose for quick and simple nail extraction should a nail jam during use Elastomer grip adds comfort and prevents slippage Engineered with the safety behind the narrow nose piece, and a short center height allows for nail placement in hard to reach areas and corners Depth of drive dial allows the user to easily adjust the drive depth for a professional finish No-mar tip on the nose protects the work piece from unintended markings 360 degree adjustable exhaust port keeps dust, debris and oil off the finished project Lightweight aluminum body and composite magazine provide a tool that reduces user fatigue.

Hitachi W6V4 6.6 A VSR Drywall Screwdriver

Dimensions (Overall): 8.0 inches (L), 3.1 inches (H) x 9.6 inches (W)Weight: 5.1 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 2-9/16 in. Magnetic Bit Holder - 317674 & bull; No. 2 Phillips Driver Bit - 971511Z & bull; Sub-Stopper G - 323352 & bull; Sub Stopper F - 323351 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The W6V4 0-4,500 RPM, 6.6 Amp Drywall Screwdriver uses drywall screws to fasten metal studs and drywall and uses hex and teks screws for fastening metal to metal and metal to wood. Applications include interior construction such as installation of ceilings, paneling or partitions, exterior construction such as installation of siding on buildings, installation of galvinized iron sheet or corrugated sheet roofing and plate assembly such as assembly of advertising billboards and automobile stamped sections. Powerful 6.6 amp motor delivers up to 4,500 RPM driving speeds Lightweight design and construction at just 3.1 lbs. for improved control and versatility Removable nose piece offers easy bit replacement and adjustments Silent clutch system helps reduce overall noise pollution during use Integrated belt hook for quick storage between use.

Hitachi 402976 Dust Extraction Attachment for Cordless Rotary Hammer

Dimensions (Overall): 14.89 inches (L), 12.05 inches (H) x 3.55 inches (W)Weight: 3.97 poundsMaterial: PlasticBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Dust Extraction Attachment for Cordless Rotary HamThe 402976 Dust Extraction Attachment for Cordless Rotary Hammer DH18DBLP4 is a self-contained unit with a HEPA filter that is compliant with OSHA's silica dust exposure regulations It captures 99.97% of particles 0.3 microns and larger. This unit has a guide hole designed to align with the hammer and bit for accurate drilling. It connects to the hammer drill body and uses the power provided by the battery. This attachment has automatic power off with a three second delay, allowing for the unit to collect any remaining dust. Compatible with Hitachi DH18DBLP4 18V Brushless Lithium-Ion SDS Plus Rotary Hammer (Tool Body Only) Powered by Li-Ion battery when unit is connected to the tool Built-in motor Self contained unit with a HEPA Filter captures 99.97% of particles 0.3 microns and larger CFM 12.36 air flow rate Translucent collector box with 300 ml filter capacity 3-Second vacuum run-off time for effective extraction of additional particles.

HITACHI CP-D32WN CP-D27WN CP-DW25WN NEW Projector Remote Control

Features: Compact and ergonomic design The remote can be used with low physical effort, it features well spaced buttons and a compact, rectangular body, which is convenient for storage and carrying. Soft buttons Buttons are comfortable but not overly-sensitive to the touch. This feature prevents them from wearing out or sending accidental signals. Batteries performance and longevity friendly Electrical circuit of the remote control requires little power to operate. It will continue to operate even when the batteries are close to their life cycle end. Strong beam The power of the beam is comparable to that of the most original remote controls and depends on the strength of the batteries inside. “ON” Indicator The “ON” Indicator lights up after any active button on the remote has been pressed. It indicates that the remote works properly and that it sends an IR signal to the device. Security screw Security Screw is a childproofing feature, that limits unwanted access to the small parts inside, preventing choking hazards associated with them. Durability The remote is manufactured from strong durable plastic and will not get easily damaged. Remote requires two “AAA” batteries (not included).

Hitachi G12SS2 Hitachi G12SS2 4-1/2-inch 5.1 Amp Grinder

Dimensions (Overall): 10.0 inches (L), 5.0 inches (H) x 5.5 inches (W)Weight: 5.45 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 5.1 Amp 4-1/2 in. Angle Grinder - G12SS2 & bull; Side Handle & bull; Wrench & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Improving on previous models, the Hitachi G12SS2 4-1/2 in. Grinder feature increased performance with a power input of 5.1 Amps and higher overload durability. The enhanced motor design creates higher cooling efficiency and ensures motor durability, delivering maximum performance on tough jobs. Powerful 5.1 Amp motor for tough grinding applications Large fan and optimized air flow ensure efficient motor cooling for a long lifetime Small grip diameter for added control and decreased user fatigue Labyrinth design for enhanced dust and debris durability Spindle lock provides quick and easy wheel changes Overload durability for increased life and reliability.

HITACHI CP-X401 CP-X450 NEW Projector Remote Control

Features: Compact and ergonomic design The remote can be used with low physical effort, it features well spaced buttons and a compact, rectangular body, which is convenient for storage and carrying. Soft buttons Buttons are comfortable but not overly-sensitive to the touch. This feature prevents them from wearing out or sending accidental signals. Batteries performance and longevity friendly Electrical circuit of the remote control requires little power to operate. It will continue to operate even when the batteries are close to their life cycle end. Strong beam The power of the beam is comparable to that of the most original remote controls and depends on the strength of the batteries inside. “ON” Indicator The “ON” Indicator lights up after any active button on the remote has been pressed. It indicates that the remote works properly and that it sends an IR signal to the device. Security screw Security Screw is a childproofing feature, that limits unwanted access to the small parts inside, preventing choking hazards associated with them. Durability The remote is manufactured from strong durable plastic and will not get easily damaged. Remote requires two “AAA” batteries (not included).

Hitachi NV90AGS Hitachi NV90AGS 3-1/2 in. Coil Framing Nailer

Dimensions (Overall): 13.25 inches (L), 13.06 inches (H) x 5.94 inches (W)Weight: 9.85 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 16-Degree Wire Collated 3-1/2 in. Coil Framing Nai & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi NV90AG(S) 16-Degree Wire Collated 3-1/2 in. Coil Framing Nailer provides the stability, accuracy and durability any professional or handyman needs from their tool to get the job done correctly and efficiently. This tool can drive nails from 1-3/4 to 3-1/2 in. and comes equipped with a tool-less depth of drive dial that adjusts to ensure flush driving. A selective actuation switch allows for easy and fast transitions from either sequential or contact nailing depending on how fast or how carefully you need to work. The NV90AG(S) incorporates numerous contractor-defined features including a steel head plate for increased durability, and a compact design with a 7.9 lbs. total weight to handle any of your jobsite framing needs. New head guard design allows for quicker disassembly during tool maintenance Lightweight at 7.7 lbs. and well-balanced for ease of maneuverability and less user fatigue Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor Convenient side load, tilt bottom magazine allows for quick and easy fastener replenishment Accepts 1-3/4 in. - to 3-1/2 in. wire collated coil framing nails Rubber grip provides comfort and ensures a secure hold Open nose design provides easy access to clear nail jams.

Hitachi 115436 12 in. 80-Tooth Fine Finish VPR Blade

Dimensions (Overall): .4 inches (H) x 14.2 inches (W) x 15.0 inches (D)Weight: 2.65 poundsBattery: No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 12 in. 80-Tooth Fine Finish VPR Blade - 115436The 12 in. 80-Tooth Fine Finish VPR Blade Hitachi's premium VPR blades are laser-cut from high quality Japanese steel. These superior blades are ideal for dry wood applications such as ripping, cross cuts, and miter cuts. Industrial high performance micrograin tungsten carbide Tri-metal shock resistant brazing Large micrograin carbide teeth Laser-cut expansion slots Electrophoresis coating protects against rust

New HITACHI CP-X5021N Projector Remote Control

Features: Compact and ergonomic design The remote can be used with low physical effort, it features well spaced buttons and a compact, rectangular body, which is convenient for storage and carrying. Soft buttons Buttons are comfortable but not overly-sensitive to the touch. This feature prevents them from wearing out or sending accidental signals. Batteries performance and longevity friendly Electrical circuit of the remote control requires little power to operate. It will continue to operate even when the batteries are close to their life cycle end. Strong beam The power of the beam is comparable to that of the most original remote controls and depends on the strength of the batteries inside. “ON” Indicator The “ON” Indicator lights up after any active button on the remote has been pressed. It indicates that the remote works properly and that it sends an IR signal to the device. Security screw Security Screw is a childproofing feature, that limits unwanted access to the small parts inside, preventing choking hazards associated with them. Durability The remote is manufactured from strong durable plastic and will not get easily damaged. Remote requires two “AAA” batteries (not included).

Hitachi 115453 SDS-Max Core Bit Dust Collector Attachment

Dimensions (Overall): 19.75 inches (L), 4.0 inches (H) x 10.0 inches (W)Weight: 2.3 poundsMaterial: PolymerBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; SDS-Max Core Bit Dust Collector Attachment - 11545Hitachi 115453 SDS Max Core Bit Dust Collector Attachment Works with vacuum to collect dust at the point of drilling Attaches to surfaces with suction provided by vacuum Does not accept core bits less than 2-3/4" or over 6-7/8 Will work with the following tools with bits 9/16'' or less in diameter Includes vacuum connection.

Hitachi CR13VBY Hitachi CR13VBY 12 Amp Low Vibration Reciprocating Saw

Dimensions (Overall): 18.3 inches (L), 24.7 inches (H) x 4.0 inches (W)Weight: 16.15 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Case & bull; 8 in. BIM All Purpose Blade & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Hitachi's CR13VBY 12 Amp reciprocating saw features a patented technology called UVP (User Vibration Protection). The adverse health effects to a user from vibration produced by power tools is a hot issue being addressed at this time. Hitachi's UVP technology reduces the overall vibration produced by the motor and therefore drastically lessens the vibration transfer to the user of the tool. A counterweight mechanism reduces full-load triaxial vibration by over 65%. A swing cutting mechanism located near the blade lessens the "rebound" effect that is normally created from a traditional orbital action cut. In addition to less vibration, the CR13VBY produces a faster cut in steel and wood as compared to competitive models. User Vibration Protection (UVP) technology incorporates a counterweight mechanism that reduces full-load tri-axial vibration by over 65% significantly reducing vibration transfer to the user 12Amp motor provides aggressive power thanks to 1370 Watts, resulting in a faster cutting speed and higher efficiency on the job Variable speed dial and trigger allow the user to adjust the cutting speed optimally for the application for less waste and more control 2 mode cutting mechanism- straight mode and "swing" mode that produce significantly less rebound effect as compared to traditional orbital action for a more efficient cut in wood materials Tool-less blade change with a simple press of a lever for quick replacements Stroke length of 1-1/4 in. at 0-3,000 SPM resulting in rapid cutting performance Constructed with a triple seal design to protect from dust and debris generated during use- also protects from water waste when cutting into pipes Durable front cover is made from double molded elastomer and plastic to protect from heat and prevent slippage Ergonomic shape and slip/heat resistant grip are easier to handle and make it easy to use all day.

Hitachi 728708 4-1/2 in. Thin Kerf Diamond Blade

Dimensions (Overall): 7.5 inches (L), 6.0 inches (H) x 6.0 inches (W)Weight: .3 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 4-1/2 in. Thin Kerf Diamond Blade - 728708Withstands days of repeated use and outlasts traditional blades (of equal or greater value). Diamond bearings provide a sharper, longer lasting edge that blasts through concrete slabs and granite countertops. This blade is perfect for patio and stonecutting projects and the thin kerf delivers rapid cuts with minimal exertion. Diamond is the toughest material on earth and retains its form longer than carbide or corundum. The diamond bearings provide higher cutting efficiency with lower force, a longer blade lifespan and lower comprehensive costs. This blade is sharper and stronger than carbide and corundum tipped blades. For best results and extended (overall) life, apply light pressure while using. Cuts granite, brick, tile and concrete Diamond bearing edge Ultra thin kerf.

Hitachi 115452 SDS-Max Dust Collection Attachment

Dimensions (Overall): 3.5 inches (H) x 9.3 inches (W) x 11.5 inches (D)Weight: 1.4 poundsMaterial: PolymerBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; SDS-Max Dust Collection Attachment - 115452Hitachi 115452 SDS Max Dust Collection Attachment Works with vacuum to collect dust at the point of drilling Attaches to surfaces with suction provided by vacuum Does not accept bits over 3-3/8 Will work with the following tools with bits 9/16'' or less in diameter Includes vacuum connection.

Hitachi C7BM 7-1/4 in. 15 Amp Circular Saw with Brake

Weight: 13.35 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 7-1/4 in. 15 Amp Circular Saw with Brake - C7BMR & bull; Box Wrench - 940543 & bull; 24-Tooth Carbide Tipped Blade - 725213 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Hitachi's C7BMR 7-1/4 in. pro-grade circular saw features a patented technology called IDI (internal double insulation) to add durability and protect the tool from the harmful effects of vibration. Nothing shortens the lifespan of a tool faster than vibration. IDI is a technology whereby the aluminum housing of the tool is intertwined with an injection molded inner nylon core. This process combines the durability of an all metal body tool with the double insulation advantages of a tool with a plastic housing. Vibration is less wearing on the tool so it lasts longer and safety is significantly improved for the user. Hefty motor with 1,710 Watt output that produces a no-load speed of 5,800 RPM for greater cutting efficiency through tough materials Internal Double Insulation (IDI) technology enables the aluminum housing to be intertwined with an injection molded inner nylon core to combine the durability of an all metal body tool with the double insulation advantages of a tool with plastic housing Tool bearing sits in die-cast aluminum, instead of plastic, to improve tool reliability and greatly extend tool life Electric brake stops blade rotation within seconds preventing unintended cuts Cutting and bevel levers are well-placed and move smoothly during adjustments Levers are made from die-cast aluminum alloy for durability Bevel capacity ranges up to 55 degrees with a positive stop at 45 degrees Extra cut capacity to 55 degrees is ideal for framing and cutting compound miter angles for more flexibility Heavy-duty aluminum base offers easy to read front and side scales for accurate measurements Easily accessible carbon brush allows for quick and easy brush changes At a lightweight 10.5 lbs., this saw is easy to maneuver and transport Soft grip main and sub handles are ergonomically designed to increase grip and improve comfort AC/DC switch is operable on any power supply including a generator for optimal convenience.

Hitachi G13SC2P9 Hitachi G13SC2P9 5 in. 11-Amp Angle Grinder / No Lock-On Switch

Dimensions (Overall): 18.2 inches (L), 5.9 inches (H) x 7.0 inches (W)Weight: 9.3 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Spanner Wrench & bull; Resinoid Wheel & bull; Side Handle & bull; Wheel Guard & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The G13SC2P9 5 in. Disc Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile. The P9 has a no-locking switch. 11 Amp motor, forcible output power (2,000W) for the toughest grinding jobs Low-profile head, permits access in tight areas Dust-proof construction prolongs armature, switch and bearing life Dust seal, prevents dust from entering the ball bearing on the commutator side Removable side handle, improves control and comfort 6.2lbs, compact and lightweight design facilitates maneuverability and is excellent for overhead applications No-lock switch.

Hitachi NV90AG 16 Degree 3-1/2 in. Coil Framing Nailer

Dimensions (Overall): 13.25 inches (L), 13.06 inches (H) x 5.94 inches (W)Weight: 9.85 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 16 Degree 3-1/2 in. Coil Framing Nailer - NV90AG & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi NV90AG 16 Degree 3-1/2 in. Coil Framing Nailer packs both the driving power you need and the convenience you want into one, surprisingly lightweight package. Coil framing nailers are not known for their compact design, but this coil framing nailer weighs in at only 7.9 lb. with a head of just 13-1/6 in. The NV90AG also comes equipped with a tool-less depth of drive dial to ensure flush driving, and a selective actuation switch for fast transition to either sequential or contacting nailing. To ensure less down time, the NV90AG was designed with an open nose design for easy jam removal, and a slide load, tilt bottom magazine for fast reloads. Equipped with a steel head plate for increased durability, this tool can handle any of your jobsite framing needs. Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switch Tool-less depth of drive dial adjust for flush fastening in varying materials Side load, tilt bottom magazine for fast and easy reloads Steel head plate for increased durability Open nose design for easy nail removal Large nail range capable of driving nails from 1-3/4 in. - 3-1/2 in..

Hitachi 728741 7 in. Thin Kerf Diamond Blade

Dimensions (Overall): 10.1 inches (L), .4 inches (H) x 8.8 inches (W)Weight: .9 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 7 in. Thin Kerf Diamond Blade - 728741Withstands days of repeated use and outlasts traditional blades (of equal or greater value). Diamond bearings provide a sharper, longer lasting edge that blasts through concrete slabs and granite countertops. This blade is perfect for patio and stonecutting projects and the thin kerf delivers rapid cuts with minimal exertion. Diamond is the toughest material on earth and retains its form longer than carbide or corundum. The diamond bearings provide higher cutting efficiency with lower force, a longer blade lifespan and lower comprehensive costs. This blade is sharper and stronger than carbide and corundum tipped blades. For best results and extended (overall) life, apply light pressure while using. Cuts granite, brick, tile and concrete Diamond bearing edge Ultra thin kerf.

Hitachi 32" Alpha Series 720p LED HDTV (32C11)

Overall Depth: 31.75 inchesWeight: 12 poundsElectronics Condition: NewScreen Resolution: 720pAspect Ratio: 16:9 Aspect RatioContrast Ratio: 2000:1 Static Contrast RatioNative screen refresh rate: 120 HzVESA Mounting Standard: 200x100Backlight type: LED Direct LitScreen Size: 32 inchesBattery: 2 AAA Alkaline, Required, Included & bull; The Hitachi 32C31 Alpha Series 32 In. 720p LED HDTV delivers a tremendous viewing experience at an affordable price. & bull; With a beautiful slim black bezel, graceful table stands and a high-efficiency LED backlight, this 32 in. Hitachi HDTV gives you all the features you expect from Hitachi while complementing the look of any room. & bull; The HDMI 2 input includes support for Consumer Electronics Control (CED) and Audio Return Channel (ARC).The Hitachi 32C31 Alpha Series 32 In. 720p LED HDTV delivers a tremendous viewing experience at an affordable price. With a beautiful slim black bezel, graceful table stands and a high-efficiency LED backlight, this 32 in. Hitachi HDTV gives you all the features you expect from Hitachi while complementing the look of any room. The HDMI 2 input includes support for Consumer Electronics Control (CED) and Audio Return Channel (ARC).

Hitachi 308776 Dust Collection Attachment for Hammer Drills and SDS Plus Rotary Hammers

Dimensions (Overall): 1.0 inches (L), 1.0 inches (H) x 1.0 inches (W) x 1.0 inches (D)Weight: 1.0 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Dust Collection Attachment for Hammer Drills and SThe 308776 Dust Collection Attachment is compatible with Hitachi Hammer Drills & SDS Plus Rotary Hammers. It attaches to the tool and then to a vacuum to collect dust at the point of drilling. Since the attachment is on the tool and not attached to the wall it allows the user to move much faster. There is no need to unattach from the wall and move it to the next hole as this unit moves with the tool. An adapter included to connect to the vacuum hose. Compatible with Hitachi Hammer Drills and SDS Plus Rotary Hammers Attaches to the tool and then to a vacuum to collect dust Built-in depth of drill adjustment Vacuum connection required Attachment moves with the tool since it attaches to the tool via the depth gauge socket On tool design allows the user to move faster from hole to hole Solid construction for jobsite durability Adapter included to connect to vacuum hose Compatible with Hitachi DH26PF SDS Plus Rotary Hammer Compatible with Hitachi DH28PFY SDS Plus Rotary Hammer Compatible with Hitachi DH18DBLP4 18V Li-Ion SDS Plus Rotary Hammer Compatible with Hitachi DH18DSLP4 18V Li-Ion SDS Plus Rotary Hammer Compatible with Hitachi DV16VSS 5/8 in. 5.4-Amp Hammer Drill, 2-Mode, VSR Compatible with Hitachi DV16V Hammer Drill 2-Modes VSR Compatible with Hitachi FDV16VB2 5/8 in. 5-Amp Hammer Drill, 2-Modes, VSR.

Hitachi NR90ADS1 Hitachi NR90ADS1 3-1/2 in. Paper Collated Framing Nailer

Dimensions (Overall): 20.08 inches (L), 12.69 inches (H) x 4.94 inches (W)Weight: 9.8 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 35-Degree Paper Collated 3-1/2 in. Strip Framing N & bull; Safety Glasses & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The NR90AD(S1) framing nailer drives paper collated nails from 2 in. up to 3-1/2 in. in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction. The Hitachi NR90AD(S1) 35-Degree Paper Collated 3-1/2 in. Strip Framing Nailer is smaller, faster and has more style than other models. It offers state-of-the-art performance and futuristic good looks with a lighter weight, too. This tool drives 2 - 3-1/2 in., paper tape, clipped head nails for easily tackling the most demanding framing jobs. A Flip Fire switch lets you choose sequential or bump fire modes depending on how fast or how carefully you need to work, and a tool-free depth-of-drive adjustment means less downtime and more productivity. New head guard design allows for quicker disassembly during tool maintenance Lightweight at 7 lbs and well-balanced for ease of maneuverability and less user fatigue Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch Accepts 2 in. up to 3-1/2 in. paper collated framing nails Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor Two-piece anodized aluminum magazine makes repairs or replacements easy and with minimal expense Two-step nail loading makes fastener replenishments quick and easy, reducing downtime Open nose design provides easy access to clear nail jams Rubber grip over-mold on the handle and trigger provides a secure grip, while additional rubber grip on the backside of the nailer adds comfort when nailing in overhead applications.

Hitachi 115454 Angle Grinder Cutting Dust Collector Shroud

Dimensions (Overall): 11.5 inches (L), 3.5 inches (H) x 9.3 inches (W)Weight: 1.3 poundsMaterial: PolymerBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Angle Grinder Cutting Dust Collector Shroud - 1154Angle Grinder Cutting Dust Collector Shroud - 115454 Works with the following tools G18DSL, G12SA3, G12SE2, G12SE2P9, G12SQ, G12SR4, G12SS, G12SS2, G12VA, G12VE, G13SC2, G13SN Designed for use while cutting hard stone Connects to vacuum to collect dust Does not accept wheels over 5 in. Use dust extractor with 125+ CFM.

Hitachi CG22EAP2SLB Hitachi CG22EAP2SLB Curved Shaft Trimmer Purefire 21.1cc

Dimensions (Overall): 11.9 inches (H) x 12.2 inches (W) x 64.0 inches (D)Weight: 41.3 poundsCA Carburetor Law Compliant: YesAssembly Details: Adult Assembly Required, Tools Not ProvidedCutting Width: 0 inchesPower Source: Gas-PoweredBattery: No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; RefurbishedRefurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. To help reduce fatigue and improve user comfort and control, the Hitachi CG22EAP2SLB curved shaft grass trimmer features a long 54" drive shaft, anti-vibration system, and weighs a mere 10.1 lbs fully assembled. It is powered by a heavy-duty 21.1 cc commercial grade engine that delivers power and durability expected from a commercial grade grass trimmer. This curved shaft grass trimmer is ideal for a user who demands performance, reliability and durability. 21.1 cc PureFire two-stroke engine meets emissions levels without sacrificing power, adding weight, or creating maintenance issues Extra long 54 in. shaft to lessen fatigue from bending S-Start effortless and reliable starting system reduces the amount of pull force required for fast and easy start-up Anti-vibration system provides maximum comfort to get more done with less fatigue 4 in. semi-automatic trimmer head provides hassle-free operation and hold 13 feet of .095 in. co-polymer cutting line Features a Walbro carburetor with purge bulb for easier starting Lightweight at 10.1 lbs (dry weight) & well-balanced for ease of use and maneuverability Protective cover shields the fuel tank from wear and tear

Hitachi C10FCH2 10 in. Compound Miter Saw with Laser Guide

Dimensions (Overall): 15.6 inches (L), 13.6 inches (H) x 20.4 inches (W)Weight: 38.74 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 10 in. Compound Miter Saw with Laser Guide - C10FC & bull; 10 in. 24T TCT Saw Blade - 311128 & bull; Pivoting Flip Fence - 326704 & bull; Dust Bag - 322955 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Named "Best Value" Miter Saw by a popular home improvement magazine February 2014! This new 10 in. compound miter saw offers the ultimate in form and function. With its aggressive design, there is no doubt that this saw is designed for the professional. The C10FCH2 features a powerful 15 Amp motor, vibration reducing horizontal handle, and Hitachi's exclusive laser guide system. At just 26.5 lb., the C10FCH2 is the lightest saw in its class. 15 Amp motor, intense power for the toughest cutting jobs Hitachi's exclusive Laser Guide System for increased cutting accuracy Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control Large pivoting fence with a 4 in. cutting capacity for crown molding applications Large table, provides better material support Thumb actuated positive stops, easy to use for quick miter adjustments Dust collector attachment, to minimize airborne particles Lightest in its class at only 23.8 lbs. for easy transportation and clean up Compatible with the UU610 and UU610CZ Universal Work Stations from Hitachi.

Hitachi G12SN Hitachi G12SN 4-1/2 in. 7.4-Amp Angle Grinder

Overall Length: 10.0 inchesWeight: 6.1 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Wrench & bull; Side Handle & bull; Depressed Center Wheel & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Hitachi G12SN 4-1/2 in. 7.4-Amp Angle Grinder Accepts 4-1/2 in. grinding wheel accessories Adhesive coated connections to prevent motor damage due to dust and corrosion High overload durability to resist internal damage during even the toughest tasks Forcible 7.4-amp motor powers the tool to 10,000 RPM Just 10-3/16 in. in length for easy maneuverability Small grip perimeter for less fatigue during extended use Spindle lock for quick and easy disc and accessory changes Removable, 2-position forward-canted side handle for improved control and comfort for right and left-handed users Compact and lightweight at 3.5lbs for greater control and maneuverability, especially in overhead applications.

HITACHI CP-X880 CP-X885 NEW Projector Remote Control

Features: Compact and ergonomic design The remote can be used with low physical effort, it features well spaced buttons and a compact, rectangular body, which is convenient for storage and carrying. Soft buttons Buttons are comfortable but not overly-sensitive to the touch. This feature prevents them from wearing out or sending accidental signals. Batteries performance and longevity friendly Electrical circuit of the remote control requires little power to operate. It will continue to operate even when the batteries are close to their life cycle end. Strong beam The power of the beam is comparable to that of the most original remote controls and depends on the strength of the batteries inside. “ON” Indicator The “ON” Indicator lights up after any active button on the remote has been pressed. It indicates that the remote works properly and that it sends an IR signal to the device. Security screw Security Screw is a childproofing feature, that limits unwanted access to the small parts inside, preventing choking hazards associated with them. Durability The remote is manufactured from strong durable plastic and will not get easily damaged. Remote requires two “AAA” batteries (not included).

Hitachi G18ST Hitachi G18ST 7 in. 15-Amp Angle Grinder

Dimensions (Overall): 23.7 inches (L), 7.0 inches (H) x 7.2 inches (W)Weight: 14.2 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 7 in. 15 Amp Trigger Switch Angle Grinder - G18ST & bull; Side Handle & bull; Wrench & bull; Wheel Guard & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi 7 in. 15 Amp Angle Grinder uses a heavy-duty 15.0 amp motor to provide you with 3,150 Watts of forcible output power for the toughest grinding jobs. It offers a no-load speed of 8,500 RPM, while the commercial-grade helical cut gears increase durability. A specially sealed armature coil reduces wear caused by ingested debris, and convenient carbon brush access allows you to replace the brush as needed to greatly prolong the life of the tool. An added spindle lock provides safe and easy disc changes. Weighing 9.5 lb., its ergonomic design makes it easy to use for longer periods with less fatigue. The trigger switch and removable side handle also increase comfort and control. Powerful 15Amp motor produces forcible 3,950W output for plenty of power, torque and durability for tough jobs Lightweight design for reduced fatigue and improved control Class leading overload durability for increased life and reliability Halved stator design creates better cooling efficiency and ensures high motor durability Labyrinth construction prevents dust and debris from entering motor bearings and ensures smoother operation and longer tool life Armored coils protected by varnish, protection tape and long wedges help to prolong service life by protecting from fine grinding particles Removable side handle attaches to the left or right of tool Externally accessible carbon brushes allow for quick and easy maintenance Spindle lock for easy wheel changes.

Hitachi SB8V2 3 in. x 21 in. Variable Speed Belt Sander

Overall Width: 6.75 inchesWeight: 11.5 poundsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 3 in. x 21 in. Variable Speed Belt Sander - SB8V2 & bull; Sanding Belt & bull; Dust Bag & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi 3 in. x 21 in. Variable Speed Belt Sander comes with a powerful 9 amp motor for high performance on the job. It offers more visibility of the surface with its clear tracking window while adding comfort with soft, ergonomic grips for long periods of use. Equipped with a left mounted dust bag for clean up and flush surface design for quick and even sanding, this sander can handle any job thrown its way. Powerful 9 amp motor delivers high performance Variable speed dial adjusts from 820 - 1450 ft./min for improved manageability Lightweight, compact design for reduced fatigue and improved control Left side mounted dust collection bag reduces airborne particles Tracking window improves visibility of surface and sanding belt Soft, elastomer grips for a comfortable and secure hold Flush surface for quick and even sanding Wear resistant V-Belt drives sander for double service life.

Hitachi C10FCE2 10 in. Compound Miter Saw

Dimensions (Overall): 15.6 inches (L), 13.6 inches (H) x 20.4 inches (W)Weight: 37.98 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 10 in. Compound Miter Saw - C10FCE2 & bull; 10 in. 24T TCT Saw Blade - 311128 & bull; Pivoting Flip Fence - 326704 & bull; Vise Assembly - 322952 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi C10FCE2 10 in. Compound Miter Saw has a 15 amp motor that is strong enough for the toughest cutting jobs. Beyond power, the C10FCE2 is also designed to be comfortable to use with a horizontal handle and elastomer grip. This Miter Saw is also extremely portable at only 26.3 lb., so you can transport it to and from the jobsite with ease. 15 amp motor, intense power for the toughest cutting jobs Up to 52 degrees miter angle range, to the right and left for increased flexibility Up to 48 degree bevel range, to the left with adjustable bevel stops for precision cuts Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control Large extended flip fence, raises to 4 in. for cutting crown molding vertically Large table, provides better material support Thumb actuated positive stops, easy to use for quick miter adjustments Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool Dust collector attachment, to minimize airborne particles At 26.3 lbs. the C10FCE2 miter saw is the lightest in its class to facilitate maneuverability and portability Compatible with the UU610 miter saw stand from Hitachi.

Hitachi SV13YST 5 in. Variable Speed Random Orbit Finishing Sander

Dimensions (Overall): 8.7 inches (L), 6.3 inches (H) x 5.3 inches (W)Weight: 4.19 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Sanding Paper (5 in.) & bull; A-P120 308519R & bull; Vacuum Adapter RP - 250YDMR & bull; Adapter (rubber) RP 80YDR & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The new SV13YST 5" random orbit finishing sander features a palm grip design that gives the user complete control. Its soft elastomer covered body provides a comfortable grip while also helping to reduce vibration. With a powerful, 2.8 Amp motor and an impressive 9,000-13,000 OPM this sander can remove a lot of stock in a short period. Standing at only 5-9" high and weighing only 3.1 lbs, this compact workhorse will make a nice addition to any woodworker's arsenal Palm-style, soft comfort grip reduces vibration and provides a comfortable grip 9, 000 to 13, 000 RPM variable speed dial to achieve super smooth finishes Hook & loop & 8 hole pad system allows you to change sanding sheets quickly and easily Dust sealed rocker switch helps to extend tool life Includes dust collection hose connector & adaptor to reduce clean up time.

Hitachi SV12SG Hitachi SV12SG 1/4 Sheet Orbital Finishing Sander

Dimensions (Overall): 11.25 inches (L), 6.0 inches (H) x 8.75 inches (W)Weight: 3.75 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Sanding Paper- 4-1/2 in. x 5-1/2 in. & bull; 80 Grit Dust Bag & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The SV12SG ¼ Sheet Finishing Sander features an all new design and large soft grip that comfortably fits in the palm of a hand for ease of operation. It sands wood to a finish and can prepare woodwork or sheet metal for painting. 1.7 Amp (200W) motor, provides 14,000 opm to achieve super smooth finishes 4-3/8 x 4 pad size, optimal for fine finish sanding applications Clamp system, easy to use for quick and easy sanding sheet changes Complete ball bearing construction for smooth, precise operation Dust sealed switch, helps protect and extend tool life Dust collection system, most efficient in its class to reduce airborne particles Soft Elastomer covered grip reduces vibration Easy-to-palm handle, provides smooth touch and comfortable grip 2.4lbs, lightweight design facilitates maneuverability and ease of use.

Hitachi NH90AB 3-1/2 in. Air Powered Palm Nailer

Dimensions (Overall): 9.3 inches (L), 3.5 inches (H) x 7.2 inches (W)Weight: 1.7 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Safety Glasses (875769) & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Installs joist hangers and metal connectors in confined spaces. 360 degree swivel fittingMagnetic nose Front exhaust Rubber grip.

New HITACHI CP-X2010N Projector Remote Control

Features: Compact and ergonomic design The remote can be used with low physical effort, it features well spaced buttons and a compact, rectangular body, which is convenient for storage and carrying. Soft buttons Buttons are comfortable but not overly-sensitive to the touch. This feature prevents them from wearing out or sending accidental signals. Batteries performance and longevity friendly Electrical circuit of the remote control requires little power to operate. It will continue to operate even when the batteries are close to their life cycle end. Strong beam The power of the beam is comparable to that of the most original remote controls and depends on the strength of the batteries inside. “ON” Indicator The “ON” Indicator lights up after any active button on the remote has been pressed. It indicates that the remote works properly and that it sends an IR signal to the device. Security screw Security Screw is a childproofing feature, that limits unwanted access to the small parts inside, preventing choking hazards associated with them. Durability The remote is manufactured from strong durable plastic and will not get easily damaged. Remote requires two “AAA” batteries (not included).

Hitachi CR18DGLP4 18V Cordless Lithium-Ion Reciprocating Saw (Tool Only)

Dimensions (Overall): 18.0 inches (L), 4.6 inches (H) x 8.0 inches (W)Weight: 7.0 poundsBattery Voltage: 18.0 voltsPower Source: BatteryBattery: 1 Required, Not IncludedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 18V Cordless Lithium-Ion Reciprocating Saw - CR18D & bull; (2) Wood Cutting Blades & bull; Tool Only: Battery and Charger Sold Separately & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi CR18DGLP4 18V Cordless Lithium-Ion Reciprocating Saw provides comfort and convenience with power and precision. Available as a tool body only, it's compatible with all Hitachi's 18V slide type Lithium-Ion batteries (Sold Separately). This reciprocating saw generates no-load speed of 3,300 SPM with a 1' in. stroke. It is also now covered by the Hitachi Lifetime Li-Ion tool Warranty. Compatible with Hitachi's 18V Li-Ion slide-type batteries for fade free power, less weight and 3x the battery life of traditional Ni-Cd batteries Tool-less blade change system allows for quick replacements and reduced downtime Soft grip handle for improved comfort and less fatigue Adjustable front shoe for depth of cut control and extended blade life LED light for convenient visibility when cutting in dark spaces.

Hitachi W6V4SD2 Hitachi W6V4SD2 Super Drive Drywall Tool

Dimensions (Overall): 20.0 inches (L), 3.5 inches (H) x 10.7 inches (W)Weight: 6.4 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; SuperDrive Collated Drywall Screw Gun - W6V4SD2 & bull; #2 Phillips Bit & bull; Case Hardened Drywall Nose Piece & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products. Durability is the bottom line for Hitachi Power Tools. Hitachi sees proof every day with some of their tools coming back for service that were sold 20 years ago! The technology Hitachi incorporates and the determination to produce nothing but the best is evident in the lifespan and longevity of Hitachi's tools Ideal for drywall to wood and drywall to metal installations Features a no-load speed of 0-4,500 RPM and a max torque of 81.5 in-lbs, ideal for faster fastening applications Tool-free depth of drive adjustment requires only a press of a block and a turn of the knurled wheel to increase or decrease the depth of the screw Tool-free screw length adjustment automatically adjusts as the screw lengths change from 3/4 in. up to 2-3/16 in. in length for fast and seamless transitions on the job While other tools require multiple attachments for different length screws, the SuperDrive system is ready for work given it fastens from 3/4 in. to 2-3/16 in. screws with diameters from #6-#12 Body of the screwdriver is covered in a soft, yet durable elastomer compound, which provides a comfortable and slip-resistant grip Powerful 6.6 Amp motor (750 Watts of input power) Belt hook incorporated into the body of the screwdriver adds convenience Large trigger with lock-on for continuous use is designed for comfort and control during operation Gear case and inner cover are constructed out of aluminum to add durability and increase tool life Plastic cover keeps the gear case from being scratched or damaged during extreme use 24.6 ft power cord is unusually long to allow movement without the hassle of relocating to different power outlets.

Hitachi C8FSE 8-1/2 in. Sliding Compound Miter Saw

Dimensions (Overall): 31.09 inches (L), 19.09 inches (H) x 21.84 inches (W)Weight: 42.15 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 8-1/2 in. Sliding Compound Miter Saw - C8FSE & bull; 8-1/2 in. 24T TCT Saw Blade - 998840 & bull; Vice Assembly - 329860 & bull; Dust Bag - 322955 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi C8FSE 8-1/2 in. Sliding Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of work pieces, including trim and crown molding. Its gliding slide system allows for easy handling of large framing pieces, and its compound cutting capability provides versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C8FSE is the lightest and most portable sliding compound miter saw in its class. Powered by a 9.5 amp motor with a no-load speed of 5,500 RPM to smoothly handle the toughest cutting applications Sturdy construction stands up to jobsite travel and tough high-volume tasks while retaining accurate measurements Positive miter stops for quick adjustments to 15, 22.5, 31.6, and 45 degrees to the left and right Precise compound cuts with 48 degree bevel angle left and 5 degree bevel angle right Easy-to-read measurements and quick settings on miter and bevel scales Only 31 lbs. for lightweight portability Linear ball bearing slide system for superior accuracy and ease of use Vertical handle with soft, vibration reducing elastomer grip Electronic speed control for consistent RPM while cutting for maximum control Adjustable pivot fence broadly supports work piece, such as crown molding lying flat, for improved stability while cutting Splinter guard reduces tear out and increases user safety Externally replaceable carbon brushes for prolonged life of the tool Dust collector attachment minimizes airborne particles.

Hitachi G13VA 5 in. 13 Amp Angle Grinder

Dimensions (Overall): 15.2 inches (L), 6.9 inches (H) x 12.3 inches (W)Weight: 7.9 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 5 in. 13 Amp Angle Grinder - G13VA & bull; Wheel Guard & bull; Side Handle & bull; Spanner Wrench & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Combining power and performance with safety and convenience, the Hitachi G13VA 13 Amp 5 in. Angle Grinder is equipped with a powerful 13 Amp motor that is capable of producing 2,800 Watts output and 10,000 RPM. A variable speed switch allows the user to determine the best speed for projects including surface fishing, rust and paint removal, light grinding, concrete finishing, wire cup and wire wheel applications. This tool features Electronic Overload Protection, which stops the motor when too much pressure is applied, ultimately extending motor life. When the tool shuts off, the switch must be turned to the "off" position and then turned back to the "on" position to resume work. This feature not only protects the motor from overload, but it protects the gearbox from damage and protects the user from possible injury from accidental restart. Powerful 13 Amp motor produces a best-in-class 1,500 Watts output Variable speed switch allows the user to determine the best speed for each application Trigger lock-on for comfortable, continuous operation Anti-vibration side handle offers comfort during extended use Electronic overload protection stops the motor when too much pressure is applied to extend motor life Kick-back protection quickly shuts off power in the event of a bound wheel, protecting the user and extending the life of the gears and motor Tool-less wheel guard for quick and easy disc changes Lightweight design at 4.4 lbs. to facilitate maneuverability, making this tool excellent for overhead applications.

Hitachi CJ18DGLP4 18V Cordless Lithium-Ion Jig Saw (Tool Only)

Dimensions (Overall): 9.9 inches (L), 3.4 inches (H) x 8.75 inches (W)Weight: 4.7 poundsBattery Voltage: 18.0 voltsPower Source: BatteryBattery: 1 Non-Universal Lithium Ion, Required, Not IncludedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 18V Cordless Lithium-Ion Jig Saw - CJ18DGLP4 & bull; (2) Wood Cutting Blades & bull; Steel Blade & bull; Tool Wrench & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi CJ18DGLP4 18V Cordless Lithium-Ion Jig Saw combines comfort and convenience with power and precision. Available as a tool body only, it's compatible with all Hitachi's 18V slide type Lithium-Ion batteries (sold separately). This saw features three modes of orbital action for the most aggressive cuts and tool-free blade changes. It is also now covered by the Hitachi Lifetime Li-Ion tool Warranty. Compatible with Hitachi's 18V Li-Ion slide-type batteries for fade free power, less weight and 3x the battery life of traditional Ni-Cd batteries Three-mode orbital action allows for accurate and efficient cuts in a variety of materials Tool-less blade changing system makes for quick and reduced downtime 45 Degree cutting angle adjusts to meet the application LED light for convenient visibility and precise cuts Soft grip handle for improved comfort and less fatigue On-tool blade storage that holds up to 6 blades for added convenience and less downtime.

Hitachi W6VB3SD2 Hitachi W6VB3SD2 SuperDrive Sub-Flooring Collated Screw Gun 2600RPM

Dimensions (Overall): 20.0 inches (L), 3.5 inches (H) x 10.7 inches (W)Weight: 10.5 poundsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; SuperDrive Sub-Floor/Decking Collated Screw Gun - & bull; SuperDrive Extension & bull; #2 Phillips & bull; #2 Square and #2 Lox bit & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products. Durability is the bottom line for Hitachi Power Tools. Hitachi sees proof every day with some of their tools coming back for service that were sold 20 years ago! The technology Hitachi incorporates and the determination to produce nothing but the best is evident in the lifespan and longevity of Hitachi's tools. Ideal for decking installations, drywall, sub-floor, metal framing, underlayment, sheathing, siding, roof tile, cement board, fences, shear walls, panelization, metal deck stitching and pallets 20 in. Extension allows the user to work from a grounded standing position without having get down on the floor or stand on a ladder for above the head applications Features a no-load speed of 0-2,600 RPM and a max torque of 139.6 in-lbs., ideal for higher torque applications Tool-free depth of drive adjustment requires only a press of a block and a turn of the knurled wheel to increase or decrease the depth of the screw Powerful 6.6 Amp motor (750 Watts of input power) While other tools require multiple attachments for different length screws, the SuperDrive system is ready for work given it fastens from 5/8 in. to 3 in. screws with diameters from #6-#12 Body and handle of the screwdriver are covered in a soft, yet durable elastomer compound, which provides a comfortable and slip-resistant grip Belt hook incorporated into the body of the screwdriver adds convenience Large trigger with lock-on for continuous use is designed for comfort and control during operation Aluminum gear case and inner cover add durability and increase tool life Plastic cover keeps the gear case from being scratched or damaged during extended use 24.6 ft. power cord is extra long to allow movement without the hassle of relocating to different power outlets.

Hitachi NV65AH 16 Degree 2-1/2 in. Coil Siding Nailer

Dimensions (Overall): 10.5 inches (L), 11.81 inches (H) x 5.17 inches (W)Weight: 6.0 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 16 Degree 2-1/2 in. Coil Siding Nailer - NV65AH & bull; Safety Glasses - 875769 & bull; 3mm, 4mm, 5mm Hex Bar Wrenches - 943277, 944458, 9 & bull; No Mar Nose Cap - 878344 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Lightweight and durable, the Hitachi NV65AH 1-3/4 in. Siding Coil Nailer is a contractor-preferred pneumatic tool with high-performance capabilities. This is an ideal tool for siding, fencing, decking, roof sheathing, and more. The NV65AH has everything you need, including a high-capacity magazine, tool-less depth adjustment, a 360 degree exhaust diverter, and a pneumatic drive system. Since it's compatible with wire or plastic-coated nails of varying sizes, the NV65H is a flexible tool that can be used for a wide variety of applications. At 4.6 lbs., This tool is lightweight and compact for easy maneuverability Depth of drive adjustment to countersink or flush drive nails Drives wire and plastic sheet collated nails for added flexibility Adjustable air deflector directs the air exhaust in any direction No mar nose cap attachment protects material from accidental marks Plastic shield deflects wire collation for added safety Long-lasting rubber grip for added comfort.

Hitachi 115451 SDS-Plus Dust Collection Attachment

Dimensions (Overall): 2.5 inches (H) x 4.8 inches (W) x 10.8 inches (D)Weight: .6 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; SDS-Plus Dust Collection Attachment - 115451Hitachi 115451 SDS Plus Dust Collection Attachment Works with vacuum to collect dust at the point of drilling Attaches to surfaces with suction provided by vacuum Does not accept bits over 9/16 Will work with the following tools with bits 9/16'' or less in diameter DH38YE2, DH40MEY, DH38MS, DH52MEY, DH45MEY, DH45ME, DH38PC2, DH52ME, DH26PF, DH28PFY, DH40MR.

Hitachi G13SC2 5 in. 11 Amp Trigger Switch Small Angle Grinder

Overall Length: 18.0 inchesWeight: 9.35 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 5 in. 11 Amp Trigger Switch Small Angle Grinder - & bull; Side Handle & bull; Spanner Wrench & bull; Resinoid Wheel & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi 5 in. 11 Amp Angle Grinder uses a heavy-duty 11.0 amp motor to provide you with 2,000 Watts of forcible output power for the toughest grinding jobs. It offers a no-load speed of 10,000 RPM, while the commercial-grade helical cut gears increase durability. An added spindle lock provides safe and easy disc changes. Weighing only 6.2 lb., it's a lightweight tool with an ergonomic design, making it easy to use with less fatigue. The trigger switch and removable side handle also increase comfort and control. Powerful 11.0 amp motor with maximum output of 2,000 Watts Lightweight, compact design for reduced fatigue and improved control Trigger switch for comfortable continuous operation Spindle lock provides easy and quick disc changes.

Hitachi NV65AN Hitachi NV65AN 2-1/2 in. Coil Pallet Nailer

Dimensions (Overall): 15.0 inches (L), 6.2 inches (H) x 14.6 inches (W)Weight: 9.2 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Coil Pallet Nailer & bull; Safety Glasses & bull; Sequential Trigger & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The NV65AN 2 in. coil pallet nailer is the latest offering to the pallet industry from Hitachi. The NV65AN brings more power and precision while building pallets. It can fire 3 nails per second as large as 2-1/2 in. x.099 making this a powerful and efficient coil pallet nail gun. It features a side loading magazine and open nose design for convenience. The NV65AN also features a plastic shield to protect you from wire collation. Out of the box it comes with a bump fire trigger but you will also get a sequential fire trigger in the box if you want to switch. Contact (bump) trigger installed (comes with optional sequential trigger in the box) 360 degree adjustable air deflector directs the air exhaust in any direction and away from the user Side load magazine for fast and easy re-loads Open nose design for easy jam removal Clear plastic shield deflects wire collation away from the user for added safety Lightweight and well-balanced at just 5.7 lbs for less fatigue Long lasting rubber grip for added comfort.

Hitachi NV45AB2 16 Degree 1-3/4 in. Coil Roofing Nailer

Dimensions (Overall): 9.84 inches (L), 10.38 inches (H) x 4.63 inches (W)Weight: 6.95 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 16 Degree 1-3/4 in. Coil Roofing Nailer - NV45AB2 & bull; Safety Glasses - 875769 & bull; Magazine Shingle Guide Assembly - 883370 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. Lightweight and durable, the Hitachi NV45AB2 1-3/4 in. Coil Roofing Nailer stands up to the elements and provides consistently accurate results over the life of the tool. An ideal tool for a variety of construction projects, including installation of asphalt roofing shingles and insulation boards. The NV45AB2 features a high-capacity side-load magazine, depth of drive adjustment, durable construction, and more. At 5.5 lbs., this lightweight and well balanced tool is made for easy maneuverability Side loading magazine convenient and easy for quick replenishment Tool-less depth of drive adjustment for precision nailing and flush driving Rubber pads help to keep the nailer from sliding off of the roof when not in use Carbide tipped push lever reduces wear Quick driving for maximum efficiency Pneumatic power feed and return allows the tool to operate in the harshest conditions Long-lasting rubber grip for added comfort.

Hitachi C10FSHC 10 in. DB Slide Miter Saw

Dimensions (Overall): 30.18 inches (L), 26.06 inches (H) x 23.81 inches (W)Weight: 53.75 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 1 Required, Not IncludedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 10 in. 40T TCT Saw Blade (310878) & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The new model is a 10 in. dual bevel compound Miter saw. It was designed to meet the demands of the do-it-yourself customer. This model brings “Pro” like features for a “Pro” like finish product. The model is lightweight (20.7 lbs.) and equipped with the new simple slide structure. The compact slide system decreases the footprint of the saw by up to a foot saving you valuable real estate in any shop environment. A great feature for small shops and tight garages. It comes with a LED light to give its user more confidence and a safer work environment in low light situations. The easily adjustable tool-less laser marker allows even the most novice users to make perfectly accurate cuts. Simple & compact slide system allows the saw head to slide along fixed rails, for zero rear clearance Powerful 15 Amp motor to tackle tough cutting jobs with ease 0-60 degree miter angle to the right and 0-55 degree to the left for flexibility Laser Marker System from Hitachi increases cutting accuracy 0-48 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place Positive stops and indications on the miter and bevel scale, for easy to read measurements and quick settings.

Hitachi N5008AC2 16-Gauge 7/16 in. Crown 2 in. Construction Stapler

Dimensions (Overall): 14.38 inches (L), 10.16 inches (H) x 3.0 inches (W)Weight: 6.1 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 16-Gauge 7/16 in. Crown 2 in. Construction Stapler & bull; Hex Bar Wrench 4mm - 944458 & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day money back guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing. The Hitachi N5008AC2 2 in. 16-Gauge 7/16 in. Standard Crown Stapler is a durable, lightweight, and well-balanced pneumatic stapler. It's ideal for construction work, such as wall sheathing, roof decking, subflooring, modular home building, wooden box construction, and expendable-pallet manufacturing. With a high-capacity magazine, dual firing methods, and adjustable depth of drive, the N5008AC2 Stapler can handle just about any job you throw at it. At 4.4 lbs., this tool is lightweight and well-balanced for easy maneuverability Drives 16-Gauge 7/16 in. crown staples from 1 in. to 2 in. in length Self-cleaning cylinder valve driving mechanism provides quick response and rapid driving, while resisting grease and grime build-up Top load magazine for fast and easy loading Quick clear nose with a tool-less jam release reduces down time High capacity magazine holds 157 staples for fewer replenishments Plastic magazine with stainless steel plating for added durability to endure tough projects Open magazine design allows the user to quickly check staple quantity Rubber grip for added comfort and a secure hold Depth adjustment to countersink or flush drive into a variety of materials.

Hitachi NP35A Hitachi NP35A 1-3/8 in. 23-Gauge Pin Nailer

Dimensions (Overall): 12.8 inches (L), 4.4 inches (H) x 11.8 inches (W)Weight: 4.8 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 1-3/8 in. 23-Gauge Micro Pin Nailer - NP35A & bull; Safety Glasses - 875769 & bull; 1/4 in. NPT Male Pluge - 190001 & bull; (2) Non-Marring Tips & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Hitachi's 1-3/8 in. 23-Gauge Micro Pin Nailer offers an excellent finishing solution for tasks such as trim work or cabinetry. Conveniently lightweight and compact, it fires 23-Gauge headless pins, producing near invisible holes. The magazine automatically adjusts to 5/8-in, 3/4 in, 1 in, 1-3/16 in. and 1-3/8 in. fastener lengths so you can use it on a number of projects, and it has a removable nose plate for easy jam clearing. Its large housing shield, no mar tips and rear exhaust protect delicate work surfaces from damage, and it has a dual trigger for safe and accurate placement of fasteners. It also has a reload indicator to let you know when you're running low on nails to avoid dry firing. Magazine automatically adjusts to 5/8 in, 3/4 in, 1 in, 1-3/16 in, and 1-3/8 in. fastener lengths for a wide range of versatility Large fastener capacity for fewer reloads and less downtime Dual trigger for safe and accurate fastener placement Rear exhaust directs oil and debris away from the work surface Depth adjustment for flush drives into a variety of work surfaces Reload indicator gives an easy visual recognition of low nail quantities to avoid dry firing Removable nose plate for easy jam clearing Large housing shield protects the work surface.

hts541060g9sa00 hitachi travelstar 5k100 hts541060g9sa00 hard drive hts541060g9sa00

Hitachi HTS541060G9SA00 Hard Drives Notebook Drives 60GB-5400RPM

Hitachi G10SS Hitachi G10SS 4 in. Angle Grinder

Dimensions (Overall): 10.0 inches (L), 8.0 inches (H) x 10.0 inches (W)Weight: 5.15 poundsBattery Voltage: 120.0 voltsPower Source: ElectricBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Wheel Guard & bull; Side Handle & bull; Wrench & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Hitachi's G10SS 4 in. Angle Grinder uses high quality materials including a glass reinforced polymide resin body and die cast aluminum gear casing to provide performance and durability at an aggressive price. Weighing in at just over 3 pounds and measuring only 10 inches long, the G10SS allows for optimal control while providing a high power to weight ratio. With a 5 amp, 580 watt input motor, the G10SS is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. The powerful 5 Amp motor produces 300 watts of output power The low-profile gear case is special designed for getting into the tightest of areas The small grip perimeter offers a more comfortable hold The compact and lightweight design allows for greater control and maneuverability The externally accessible carbon brushes allows for immediate replacement of worn brushes The trigger lock-on ensures continuous operation The spindle lock enables quick and easy accessory changes.

Hitachi WR16SE Hitachi WR16SE 1/2 in. Brushless Impact Driver

Dimensions (Overall): 14.5 inches (L), 4.3 inches (H) x 10.6 inches (W)Weight: 7.05 poundsBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Brushless Impact Driver & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. Hitachi has delivered with the WR16SE brushless 1/2 in. square drive impact wrench! Thanks to the brushless motor technology you can run on AC/DC power and will get much longer life from the motor with less maintenance. The WR16SE is great for many types of fastening and loosening jobs such as removing large nuts and bolts, electrical and plumbing installation, building construction, automotive maintenance and agricultural machinery maintenance to name a few. The powerful 370W brushless motor provides up tto 1,900 IPM and 1,600 no-load RPM. Brushless motor technology for more power, increased tool durability and maintenance free operation Impressive torque at 270 ft-lbs for maximum power Powerful 1,600 RPM no-load speed and 1,900 IPM to handle stubborn fasteners Large toggle switch to easily transition from forward to reverse Covered in soft, yet durable elastomer for improved durability and a non-slip grip Large bumper protects the tools gear cover Four selectable impact ranges to efficiently match the power to the application Soft start and brake function for more control AC or DC- can be used with a generator Lightweight at only 5.5 lbs for better maneuverability.

Hitachi NV75AN Hitachi NV75AN 3 in. Coil Siding, Framing & Fencing Nailer

Dimensions (Overall): 17.63 inches (L), 12.4 inches (H) x 5.2 inches (W)Weight: 9.8 poundsPower Source: Air-PoweredBattery: 0 No Battery UsedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Coil Siding, Framing & Fencing Nailer & bull; Safety Glasses & bull; Sequential Trigger & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi NV75AN coil nailer is unique in that it can handle siding or framing jobs. This makes it an excellent choice for siding contractors that also use a framing nailer to nail facia boards or corner boards. In the same respect it makes it a great choice for a framer that may also install siding. The NV75AN has the ability to fire nails as large as 3 in. x.131 and as small as 1-3/4 in. x.099. Hitachi nail guns are known for their ability to fire nails fast and the NV75AN handles 3 in. nails at a rate of 3 per second! It has a side load magazine for easy nail loading and an open nose design for convenience. The NV75AN fires either plastic collate or wire collated nails with a plastic shield to deflect wire collation for added safety. The NV75AN comes with a "bump" trigger installed but includes an optional sequential trigger in the box. Contact (bump) trigger installed (comes with optional sequential trigger in the box) Tool-less depth of drive adjustment for optimal fastener depth in a variety of applications 360 degree adjustable air deflector directs the air exhaust in any direction and away from the user Side load magazine for fast and easy re-loads Open nose design for easy jam removal Clear plastic shield deflects wire collation away from the user for added safety Lightweight and well-balanced at just 6.3 lbs for less fatigue Drives wire and plastic sheet collated nails for added flexibility Long lasting rubber grip for added comfort.

Hitachi R18DSLP4 Hitachi R18DSLP4 18 Volt Li-Ion Cordless Vacuum, (Tool Only)

Dimensions (Overall): 14.73 inches (L), 5.47 inches (H) x 4.76 inches (W)Weight: 2.9 poundsBattery: 1 Non-Universal Lithium Ion, Required, Not IncludedWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Manufacturer RefurbishedManufacturer Refurbished This Manufacturer Refurbished product is classified as Grade A. It has been refurbished directly by the manufacturer, tested and certified to work and look like new, with minimal to no signs of wear, and is being sold by a specialized third-party seller approved by Target. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer. The Hitachi R18DSLP4 18V cordless vacuum features impressive suction power for fast and efficient cleaning of any workshop or home. At only 3.3lbs and just under 17" in length, this powerful handheld vacuum features a convenient slide lock-on switch for continuous use to reduce fatigue. It accepts a 3.0Ah or 1.5Ah Lithium Ion slide-type battery (not included) that provides up to 29 minutes of non-stop use (with 3.0Ah battery). The large capacity (22oz) translucent dust catch makes it easy to view when the unit needs to be emptied. This vacuum is capable of collecting both wet and dry debris. Compatible with Hitachi's 18V Lithium Ion slide-type batteries for fade free power, less weight and 3x the total battery life of traditional batteries (batteries and chargers sold separately) Capable of 29 minutes of non-stop use with Hitachi's 3.0Ah Lithium Ion slide-type battery Slide lock-on/off switch for convenience during extended use Translucent 22oz high capacity dust catch for high capacity debris collection with easy viewing to see when the unit needs to be emptied Collects both wet and dry debris for flexibility Lightweight at just 3.3lbs for easy transport and maneuverability Delivers impressive suction power for fast and efficient cleaning of any workshop or home use.

Hitachi 43" UltraHD Series 4K Ultra HDTV (43C61)

Overall Depth: 42.0 inchesWeight: 22.5 poundsElectronics Condition: NewScreen Resolution: 4KAspect Ratio: 16:9 Aspect RatioContrast Ratio: 2000:1 Static Contrast RatioNative screen refresh rate: 60 HzVESA Mounting Standard: 200x200Backlight type: LED Direct LitScreen Size: 43 inchesBattery: 2 AAA Alkaline, Required, Included & bull; The Hitachi 43C61 43 In. 4K Ultra Series 4K HDTV delivers a thrilling 4K Ultra experience. & bull; The 4K Picture Perfect processor seamlessly upscale any program to more than 8 million brilliant pixels. & bull; Experience your sports, movies, and games in stunning detail and clarity. 3 state-of-the-art HDMI inputs capable of the fastest 4K 60 fps signals and the latest content protection technology (HDCP v2. 2) ensure compatibility with 4K programs. & bull; Experience incredible performance and design, plus upscale older formats with the 4K Ultra Series by Hitachi!The new Hitachi Series delivers a thrilling 4K UltraHD experience. The 4K PicturePerfect processor seamlessly up-scales any program to more than 8 million brilliant pixels. Experience your sports, movies and games in stunning detail and clarity. Three state-of-the-art HDMI inputs capable of the fastest 4K 60fps signals and the latest content protection technology (HDCP v2.2) ensure compatibility with 4K programs. Experience incredible performance and design with the new 4K UltraHD Series by Hitachi.