Buy En Joy Products online in United States

Intel Core i3 processors The laptop features Intel Celeron i3-6157U Processor, 4 cores , Turbo frequency 2.4GHz, which is effortless to finish daily office and entertainment. 8DDR4 memory + High Speed SSD The 2.4G frequency band is suitable for multi-obstacle and long distance.wireless transmission. 15.6 lnch Full-screen Vast Vision! Laptop body equips with a 15.6-inch FHD screen, adopts the full lamination processor, brings a vibrant and vivid experience. FHD resolution with 80% high screen proportion and narrow border design, bring immersive visual experience. Lightweight and Portable The fuselage is about 6mm to the thin part, and the weight is about 1.8kg The 15.6-inch thin and light body makes it easy to carry around . Blue 4.0 Has Faster Speeds Than Its Predecessor Bluetooth 4.0 has longer distances and faster speeds than its predecessor, Bluetooth 4.2. The top speed is up to 2Mbps, making faster and more capable Bluetooth devices more likely to be used Windows 10 Windows 10 brings back the popular Start Menu from Windows 7 and introduces new features, like the Edge Web browser that lets you mark up Web pages on your screen. Work Longer, Charge Faster! 4000mAh Laptop Uses a high-capacity battery with 6 hours of battery life that won't let you down, and its fast-charge technology lets you recharge up to 60% capacity in 49 minutes. Battery life may vary depending on usage type and environmental conditions. Battery life decreases over time. Note 1)All products have been activated Window10 system when they leave the factory. Carefully check the quality of the products to ensure that they can be directly used when the computer is turned on and that they are not second-hand products. 2)When the computer starts up, the delete key that presses the keyboard intermittently enters BIOS, Don't need press other key, but inside can only view cannot change, the non-professional person changes the system may give a problem 3)In order to ensure that the laptop light and thin, cancel the network cable equipment, can only connect to WiFi Operating System : Windows 10 CPU : Intel® Core™ i3-6157U (3M Cache, up to 2.40 GHz) GPU; Intel® Iris® Graphics 550 Memory: 8GB DDR4 Storage: 256 GB

SZD 15.6‘’ Ultra Thin And Light Laptop FHD…

$ 1,019.51 $ 1,051.04

32” 144-200Hz Gaming Monitor , 2ms response Desktop…

$ 630.62 $ 643.49

AULA F2088 Mechanical Gaming Keyboard Detachable Wrist Rest…

$ 84.93 $ 85.79

Your best gaming partner Adopts Bluetooth 3.0 technology, makes connection effortless. Wired and Bluetooth dual-mode accommodates to any situations for you to use. With LED backlight, easily switches backlight modes via Fn + M2/M1 button. Engineered for durability Ensures even stricter requirements are met for each switch produced, this gaming keyboard adopts double injection technology and suspended keycaps, not discolored and more wear-resistant easily, resulting in a lifespan of up to 50 million keystrokes. Please Note: 1.Since Apple's system is not open source, it may affect the use of a few shortcut keys, but it will not affect the basic functions of the keyboard. This is normal. 2. For PS4 and Xbox, only support the gaming controller, Not support keyboard input via Bluetooth or USB connection. Durable Outemu Blue Switch Ultra-durable keys tested to 50 million keystrokes 5 times life cycle than your rubber dome one The mechanical switches Outemu are designed for longevity with greater durability and responsiveness. The Mechanical Keys offer medium resistance, with tactile and quiet clicking sound, precise tactile feedback for ultimate Gaming performance. Double-Shot-Molded Keycaps & Easy to Clean It is loaded with features including strong and durable top ABS material and double-shot injection molded keycaps. Suspended and removable keycaps feel more comfortable, the characters never fade, enhanced durability and tactile feedback. Additionally, cleaning a keyboard can be easy since the keys are separate moving parts. Space Saving Design The compact 61-key mechanical keyboard design saves more space, You can use our 60% mechanical keyboard at home, at the company, and on the travel, because its size is very convenient to carry and use with stable and powerful Bluetooth function. Adjust Different Lighting Modes - 16.8 million kinds of color and customizable mode. - 19 RGB Backlight effects for cool gaming experience. FN+M2 = Turn on/off the backlit and change lighting status backlit. FN+M1 = Switch random colors and 8 monochromes, 9 colors can be adjusted FN+O/P =Speed increasing/decreasing FN+U/I = Brightness increasing/decreasing Specifications: Interface: USB Type-C Key Life: >50 million times Response Speed: 0.1ms Operating Voltage: 5V Built-in 1300mA lithium battery Charging Time: 3 hours Keyboard Type: Mechanical Keyboard Package Included: 1 x Keyboard, 1 x Type-C Cable, 1 x Key Puller, 1 x English / Chinese Manual

Motospeed CK62 Wireless 60% Mechanical Gaming Keyboard,Ultra-Compact 61…

$ 91.54 $ 94.37

Product parameters 1.wireless connection: about 8 meters 2.input voltage: DC5.0V 3.lithium battery capacity: 600MAH 4.Lithium battery weight: 14g 5.working voltage: DC 3.6-4.2V 6.working current: 20-30mA 7.vibration consumption current: 50-150mA Connecting guidance 1) connect the switch host via wireless: A. connect the handle to the host for the first time: turn on the switch host. In the main menu interface of the host, touch "handle" ? "change grip" with your fingers to enter the host pairing mode interface. On the handle, long press "home" key for 4 seconds to turn on the handle, and the four LED lights will flicker first, and then flash quickly at the same time after 4 seconds to enter the search state. When one (or more) led lights up for a long time , handle and host are matched successfully. Press "B" to return to the main menu interface. B. connect the handle to the host again: press the home key briefly to open the handle, and the handle is automatically connected to the host. C. handle back to host: a. in the sleep state of the handle, short press the home key to wake up the handle, and the handle will automatically reconnect with the host. b. in the sleep state of the host, first press the power key of the host to wake up the host, and then short press the home key of the handle to connect the host (in the sleep state of the host, directly press any key of the handle to wake up the host). 2) connect switch host through USB cable: On the main menu page of the switch host, click settings ? handle and sensor ? Pro handle wired connection in order to open the pro handle wired communication function of the switch host; connect the handle to the USB port of the switch host base with USB cable, LED4 on the handle flashes slowly; LED1 on the handle flashes slowly after connecting the host. 3) connect Windows computer through USB cable: First, you need to download and install the x-360 driver to the windows computer; then use the USB cable to connect the handle to the computer, and the four LEDs on the handle flash slowly; after the handle driver is installed automatically, the corresponding LEDs on the handle flash slowly, and the handle can be used. Support x-360 mode games. Please find the download method of x-360 driver on the network. Note: under the x-360 mode of wired connection computer, there is vibration function and no motion sensing function.

Wireless Controller for Nintendo Switch, Remote Pro Controller…

$ 46.24 $ 47.18

Product parameters: 1.wireless connection: about 8 meters 2.input voltage: DC5.0V 3.lithium battery capacity: 400MAH 4.Lithium battery weight: 10g 5.working voltage: DC 3.6-4.2V 6.working current: 20-40mA 7.vibration consumption current: 50-140mA 8.translucent abrasive crust Controller Use: 1) Wireless connection to Switch host: A. Connecting to a Switch console for the first time: Power on a Switch console, on the main interface of the console click (by using your finger) “Controllers” ? “Change Grip/order” to come to pairing mode interface; press “HOME” key and hold for 4s to power a controller on, four LEDs in the controller start blinking slowly and circularly then blinking quickly and circularly after 4s, when one (or more) of the four LEDs is solid bright, it means that the controller is paired with the console successfully; press “B” key to return to the main interface of the console. B. Connecting to a paired Switch console: If a controller was paired with a Switch console ever before, just press “HOME” key shortly to power the controller on, the controller will be connected to the console automatically again. C. Connecting controller back to Switch console: a. If a controller is in sleeping mode, press “HOME” key shortly to wake it up, it will be connected to the console again automatically. b. If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then shortly press “HOME” key of the controller to connect it back to the console (If a Switch console is in sleeping mode, the console can’t be woken up by directly pressing any key of the controller.). 2) Connecting to Switch Console via USB cable On the main interface of a Switch console, click “Settings” ? “Controllers and Sensors” ? “Pro Controller Wired Communication” ? “ON” to open Pro controller wired connection; connect a controller to the USB port of the console holder through a USB cable, LED 4 in the controller starts blinking slowly then LED 1 in the controller will be blinking slowly after the controller is connected to the console. 3) Connecting to Windows PC via USB cable X-360 driver is required to be downloaded and installed to a Windows PC at first; connect a controller to the Windows PC through a USB cable, four LEDs in the controller start blinking slowly then LED 1 and LED 4 will be blinking slowly after controller driver is installed to the PC automatically and successfully, the controller is ready for use. Games of X-360 mode are supported. X-360 driver can be gotten from internet. Note: With vibration function but without motion sensing function under X-360 mode wired connection.

PRO controller Wireless Bluetooth For Switch Console, TURBO…

$ 49.93 $ 51.47

Product parameters 1. Wireless Distance: About 8 meters 2. Input voltage: DC5.0V 3. Lithium battery capacity: 600MAH 4. Lithium battery weight: 14g 5. Working voltage: 3.6-4.2V 6. Working current: 20-80 mA 7. Vibration current: 80-140 mA Product Use 1. Connect to P4 host 1) After the P4 host starts to enter the interface, insert the data line into the host's USB port, connect the handle to the data line, then press the small house menu key at the handle end, the handle LED light will flash, when the single color LED on the handle is always bright, indicating that the connection is successful. Then unplug the data line. The handle is automatically connected back to the host. 2) Handle color LED indicator status description: display player status, press the small house key, LED light bar will light in order of blue, red, green and pink, configure the controllers, as player login order identification. 3) Up to four wireless handles can be used simultaneously. The number of devices that can be connected at the same time varies from device to device. 4) When the P4 wireless handle cannot be matched with the host, the maximum number of wireless devices that can be matched by the host has been exceeded. Please cancel the registration of unnecessary devices from the list of matched devices. In P4 host selection (settings)> [peripheral devices]> [wireless devices], select the device that you want to cancel the registration, press OPTIONS key, and then select [delete devices]. It can follow the picture to operate. 2. Connect PC 1) Connect the handle to the USB port of the PC through the USB data line, when the cable handle is used. 2) PC terminal does not support six-axis induction and vibration function. When connecting to PC, PS4 driver of PC terminal should be installed. 3. Connect to PS3 host 1) Connect the handle to the USB port of PS3 through the USB data line, when the cable handle is used. 2) The PS3 terminal does not support six-axis induction and vibration function, nor does it support the menu key function of the PS3 terminal.

Wireless Controller for PS4/PS3 Console, Touch Panel Antiskid…

$ 50.96 $ 51.47

SZD Gaming Chair With RGB LED Light Racing…

$ 332.89 $ 343.19

SZD 32” Full HD 165 Hz 1920 x…

$ 637.06 $ 643.49

Connection method 1. After connecting the original handle with the steering wheel USB boot port through the USB data cable, connect the pedal cable to the crystal socket of the steering wheel, and finally connect the steering wheel USB host cable to the currently prepared game platform host (PS4, XBOX ONE) , XBOX360) just connect. 2. After the steering wheel is successfully connected to the host and the original handle, if you are currently using a PS4 or XBOX ONE host, you need to short press the PS button on the steering wheel to operate, and the XBOX360 platform does not need to press the PS button. (Note: Only XBOX360 wired controller can be used on XBOX360 platform) PC display name: Windows XBOX 360 (X-INPUT), steering wheel controller (D-INPUT) Steering wheel indicator function There are two LED indicators on the upper part of the middle of the panel. The green light is used to indicate whether the steering wheel and the original guide handle are successfully connected; the red light is used to indicate the mode of each platform. (Note: This product has no channel light indication function) 1. PC_DINPUT, PS3, PS4, SWITCH, Android power on the red light does not light up. 2. The red light is always on when the X_INPUT/XBOX ONE/XBOX360 platform is powered on. 3. The indicator light flashes slowly when the PS3 platform enters the throttle and the brake is reset, and the indicator light is always on after the reset is successful. Combination key function 1. TP key (press key) and SELECT key on the PS4 platform key function realization method: short press the SELECT key to realize the TP key function, while pressing the SELECT + START key to realize the SELECT key function. 2. On the PS3 platform, the pedals default to the box button and the fork button; press the SELECT+START key combination for about 3 seconds to switch to the accelerator and brake to R2 and L2 to suit different games. Auto calibration function This product has the automatic calibration function of direction and pedal (throttle/brake). After all accessories are successfully connected, it is recommended to perform a calibration before power-on and use; the calibration steps are as follows: 1. The steering wheel will automatically read the initial value of the direction and pedal for 5-10 seconds after power on (note: do not operate the steering wheel and pedal at this time). 2. Direction and stroke calibration: Rotate the direction to the left and right to the maximum angle twice repeatedly. 3. Pedal calibration: depress the accelerator and brake on the pedal to the end twice.

KFT33H1 Dual-Motor Feedback Driving Force Simulator PC Racing…

$ 145.64 $ 150.14

Adjustable Ergonomic Mesh Office Chair Swivel Computer Chair,…

$ 373.90 $ 385.46

Deluxe Modern Office Armless Task Chair, Grey

$ 352.11 $ 359.30

Mesh Task Office Chair , Black

$ 212.08 $ 216.41

Product Use 1) Connecting to a Switch console for the first time Power a Switch console on, on the main interface of the console, click (by using your finger) “Controllers” ? “Change Grip/order” to come to this pairing pattern interface “Press L + R on the controller”, ignore “L + R”, then operate controller according to the following steps as below: Note: Please pair and connect each controller at this pairing pattern interface of a Switch console. A. Connecting a pair of controllers (A Left Controller plus a Right Controller) as an Entire Controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “HOME” key and hold for 4s to power a Right Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 3: After the both controllers are paired with the console successfully, press “L1” key plus “R1” key simultaneously once, the corresponding LED(s) will be solid bright in each of the both controllers, it means that an Entire Controller (a Left Controller + a Right Controller) is connected to the console successfully and ready to be used. Step 4: Press “B” key to back to the main interface of the console. B. Connecting a Left Controller as an independent controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “SL” key plus “SR” key simultaneously once, the corresponding LED(s) will be solid bright in the Left Controller, it means that the Left Controller as an independent controller is connected to the console successfully and ready to be used. Step 3: Press “left of D-Pad” key to back to the main interface of the console. 2) Connecting to a paired Switch console A. An Entire Controller (a Left Controller + a Right Controller): Short press “HOME” key for 1s to power an Entire Controller on, the controller will be connected to the console automatically again. B. An independent Left Controller: Short press “Screenshot” key for 1s to power a Left Controller on, the controller will be connected to the console automatically again. C. An independent Right Controller: Short press “HOME” key for 1s to power a Right Controller on, the controller will be connected to the console automatically again. 3) Connecting controller back to Switch console 1) If a controller is in sleeping mode, short press “HOME” key or “Screenshot” key to wake it up, it will be connected to the console again automatically. 2) If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then short press “HOME” or “Screenshot” key of the controller to connect the controller back to the console (If a Switch console is in sleeping mode, the console can’t be woken up by directly pressing any key of the controller.). Note: This pair of controllers is neither with NFC function nor with camera function. Built-in motors are none HD motors, vibration experiences might be different in some games. Games which need camera function and HD motor vibration function can’t be played normally, such as Baby, Ball Count, Eating Contest etc.