Coolgear USB 2.0 to SATA Bridgeboard
USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5G host port. It received standard Mass Storage Device Class (MSDC) SCSI command from USB host and translate into ATA/ATAPI command to SATA device. The maximum throughput can goes up to 30MB/sec. Technical Specifications USB to SATA Bridge Board Compliant with USB 2.0 specifications and pass USB certification. Support USB high speed (480Mbps) and full speed transfer rate (12Mbps). Support Mass Storage Device Class bulk only transfer. Support USB vendor command (Control Endpoint) and SCSI vendor command. Support USB host controller for UHCI OHCI EHCI mode. Compliant with Serial-ATA 1.0A specifications Support Serial-ATA generation 1 transfer rate of 1.5G b/s Support spread spectrum in receiver Support Serial-ATA power saving mode: Partial and Slumber mode. Support PIO MDMA and UDMA mode data transfer. Provide pin header for Power and SATA Activity Indicator LEDs Support HDD security feature. DC Power Input: 4-pin "Molex"
Coolgear DB9 Female 9-Pin to Terminal Block Adapter
Converts the DB9 Male input connected to the Female DB-9 serial port to a terminal block connection for fast easy wiring applications. Supports screw-less wiring with complete RS422 or RS485 data signals. Extremely compact terminal block connector reduces bulky adapters when needed. Easy identification on the adapter for 9 signal pins. Compact size: 1.38 (L) x 1.69 (W) x 0.67 (H) inch DB9 Female to Screw-less 9-Pin Terminal Block Adapter The 9-Pin to Terminal Block Adapter is a DB9 Female to (9-Pin Terminal Block Adapter that conveniently provides an immediate solution to convert a DB-9 Male serial port to a terminal block for fast and easy wiring in RS-422 and RS-485 applications. The screw-less terminal block wiring provides complete Data signals for connecting RS-422/485 field wiring to a serial port. The nine signals of the terminal block are connected directly to the 9 pins of the DB9 female connector. The Terminal Block Wiring is marked on the adapters enclosure to ensure easy signal identification. DB9 Pin Terminal Block Adapter Features and Specifications Converts DB9 female to 9-pin terminal block Screw-less terminal block with spring clamps for easy and fast wiring Terminal block provides complete 9 signals connecting directly to the 9 pins of the DB9 female connector Terminal Block Wire range Solid/Stranded wire (AWG): 20-26 Wire strip length: 8.5 - 10.0 mm / 0.34 - 0.39 inch Power Rating: DB 9: 250 V, 1.5A. Terminal Block: 300V, 2A Operating temperature: -40 C to 115 C ( -40 F to 239 F ) Dimensions 35 (L) x 43 (W) x 17 (H) mm / 1.38 (L) x 1.69 (W) x 0.67 (H) inch
coolgear native sata drive to ide 40pin adapter for most enclosures
Introduction: Here is a simple and easy adapter, just plug it into any SATA I or SATA II hard drive and instantly convert your SATA drive into an IDE 40pin standard connection drive. Product Details: Native SATA Drive to IDE 40-pin Adapter for Most Enclosures SATA to IDE Converter - Converts SATA Drive to IDE A perfect solution for converting SATA or SATA II devices to IDE ATA 40-Pin UDMA-133/100 interfaces JMicron JM20330 chip-set and supports 3.5 IDE hard drives and 5.25 optical drives. It's compliant with IDE specification and supports up to UDMA/133 drives! Chip Overview: JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. Additional Features & Specifications: The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin. This Adapter tested to work with Western Digital, Seagate, Hitachi, Maxtor, Toshiba, Fujitsu and Samsung Drives ranging in Capacity from 80GB up to 2,500GB (2.5TB). Serial ATA 1.0 Specification compliant OS Support: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 Linux and Mac OS 10.XUPC NO:729440625221 SKU:B004ETCU2E
Coolgear DB9 Female 9-Pin to Terminal Block Adapter
DB9 Female to Screw-less 9-Pin Terminal Block Adapter The 9-Pin to Terminal Block Adapter is a DB9 Female to (9-Pin Terminal Block Adapter that conveniently provides an immediate solution to convert a DB-9 Male serial port to a terminal block for fast and easy wiring in RS-422 and RS-485 applications. The screw-less terminal block wiring provides complete Data signals for connecting RS-422/485 field wiring to a serial port. The nine signals of the terminal block are connected directly to the 9 pins of the DB9 female connector. The Terminal Block Wiring is marked on the adapters enclosure to ensure easy signal identification. DB9 Pin Terminal Block Adapter Features and Specifications Converts DB9 female to 9-pin terminal block Screw-less terminal block with spring clamps for easy and fast wiring Terminal block provides complete 9 signals connecting directly to the 9 pins of the DB9 female connector Terminal Block Wire range Solid/Stranded wire (AWG): 20-26 Wire strip length: 8.5-10.0 mm / 0.34-0.39 inch Power Rating: DB9: 250V 1.5A. Terminal Block: 300V 2A Operating temperature: -40 C to 115 C ( -40 F to 239 F ) Dimensions 35 (L) x 43 (W) x 17 (H) mm / 1.38 (L) x 1.69 (W) x 0.67 (H) inch
Coolgear BeagleBone Black USB Expansion RS232 Module Cape
The USB-2COM-BB is a plug-in RS-232 cape designed for the developers and users of BeagleBone and BeagleBone Black. The USB-2COM-BB BeagleBone RS-232 cape provides two high-speed RS-232 serial interfaces two high-efficient USB 2.0 ports and one Micro SD card reader. The flat ribbon cable provides the convenience for extended connection of serial devices. This dual RS-232 cape is designed to allow any other capes to be stacked above it without interference mechanically. Features: Fully compatible with BeagleBone Black or BeagleBone platform Adds two high speed RS-232 serial ports via USB connection Each serial port provided 384 bytes receive buffer and 128 bytes transmit buffer for high speed data throughput Each serial port communication data rates up to 1 Mbps. Connector: two DB9 Male connectors via IDC flat ribbon cable RS-232 data signals: DCD RxD TxD DTR GND DSR RTS CTS RI Two downstream USB 2.0 ports with over-current detection and protection Each downstream USB port supports 5V 500 mA power for external high power USB devices Individual port power management Supports USB 1.1 and USB 2.0 transfer speeds from 1.5 Mbps to 480 Mbps automatic link and speed detection Plug-and-Play; no software or drivers required Supports SD specification v1.0 / v1.1 / v2.0 / SDHC up to 32GB Compatible with SDXC Up to 2TB Micro SD card reader with 480 Mbps USB 2.0 transfer speed CE FCC approval
Coolgear 4-port USB to RS232 Adapter FTDI FT4232H & ZyWyn
Introduction: Retail POS terminals at sales counters such as those in banks and grocery stores are essentially a PC in a custom case attached to printers scanners and displays. Some of the peripherals are integrated into the POS terminal such as the keyboard cash drawer simple pole display and receipt printer. Others are external to the terminal such as scales large flat panel pole displays credit card readers and bar code scanners. Product Details: This PRO Grade Adapter is build around FT4232H from FTDI Semiconductors which is the best and most reliable Quad Serial to USB processors on the market it also uses ZT232E RS232 transceiver from ZyWyn USA. USB cable is 6ft. total length with port identification marks on each of the DB9 Male ends. The 4X232FTDI provides the scalability to quickly adapt to new USB technologies. Multiple modules can be added to a single USB interface allowing you to add RS232 connectivity as needed. Complete product line offer many choices help you to expand and make your network grow with your requirements. Additional Features: Provides 4 RS232 Serial Ports over USB2.0 Port USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible Baud Rate up to 921.6Kbps Supports Wall Mounting Kit and Optional DIN RAIL Clips Odd Even Mark Space or None parity mode Powered by USB Bus Power no AC Adapter Required OS Support: Windows XP 2000 2003 CE Vista Windows 7 Windows 8 and 10 Linux and Mac OS 10.X
Coolgear Universal Sata Drive Adapter for All SATA Drives with Power Adapter
Introduction: SS-125SSD, a USB 2.0 to SATA Converter. This new SS-125SSD will enable you to connect All types of SATA Drives including Micro and Mini Connector types as well as standard SATA drives. USB converters are a must have device for you to easily transfer data between hard disk drives during PC migration/upgrading, and a must have gadget for any PC service technicians. SATA to USB HDD Adapter supports the following hard drives: SATA Hard Drive & Optical Drive USB Adapter Kit COMBO Supports all drives from 20GB up to 2TB Capacity SATA I and SATA II Supports 1.8 ? SATA and SATA II Drives with Micro Connector Supports 1.8 ? SATA and SATA II Drives with Mini Connector Supports 2.5 ? SATA I Drives Supports 2.5 ? SATA II Drives Supports 3.5 ? SATA I Drives Supports 3.5 ? SATA II Drives Supports 5.25 ? SATA II Optical Drives SATA Hard Drive or Optical Drive Adapter Supports SATA or SATA II Hard Drives from 80GB up to 2, 000GB (currently tested only up to 1500 GB) Supports SATA ATAPI Optical Drives CD/DVD/CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW/CD-ROM OS Support: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 Linux and Mac OS 10. X Package Contents: One USB 2.0 to SATA Cable Adapter One Power Adapter Driver CD (Only used with Old OS such as: Windows 98, Vista XP and 2000. MAC OS X Does not require drivers. User Guide/Instruction Manual
Coolgear Universal Sata Drive Adapter for All SATA Drives with Power Adapter
Universal SATA and SATA II Hard Drive Adapter for 1.8? 2.5? 3.5? and 5.25? HDD and Optical Drives JM20339 SATA to USB chip for DUAL Drive Usability Convert 1.8" / 2.5" / 3.5" Serial ATA HDD and 5.25? Serial ATA Devices into USB 2.0 interface Power adapter for 3.5? / 5.25? devices; Bus-Power for 2.5? HDD OS Compatibility: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 as well as Linux and Mac OS 10. X Introduction: SS-125SSD, a USB 2.0 to SATA Converter. This new SS-125SSD will enable you to connect All types of SATA Drives including Micro and Mini Connector types as well as standard SATA drives. USB converters are a must have device for you to easily transfer data between hard disk drives during PC migration/upgrading, and a must have gadget for any PC service technicians. SATA to USB HDD Adapter supports the following hard drives: SATA Hard Drive & Optical Drive USB Adapter Kit COMBO Supports all drives from 20GB up to 2TB Capacity SATA I and SATA II Supports 1.8? SATA and SATA II Drives with Micro Connector Supports 1.8? SATA and SATA II Drives with Mini Connector Supports 2.5? SATA I Drives Supports 2.5? SATA II Drives Supports 3.5? SATA I Drives Supports 3.5? SATA II Drives Supports 5.25? SATA II Optical Drives SATA Hard Drive or Optical Drive Adapter Supports SATA or SATA II Hard Drives from 80GB up to 2, 000GB (currently tested only up to 1500 GB) Supports SATA ATAPI Optical Drives CD/DVD/CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW/CD-ROM OS Support: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8 Linux and Mac OS 10. X Package Contents: One USB 2.0 to SATA Cable Adapter One Power Adapter Driver CD (Only used with Old OS such as: Windows 98, Vista XP and 2000. MAC OS X Does not require drivers. User Guide/Instruction Manual
Coolgear USB to Serial Adapter Cable 10ft. Long with FTDI Chipset
Introduction: The 10ft232-STF is perfect for use with serial devices that you would want to convert to USB. This unique cable allows you to use bridge/connectivity between the Universal Serial Bus (USB) and Serial Port Interface. Product Details: Serial ports on USB allow further use of existing devices even when the computer doesn’t offer serial ports. The high speed serial port with the 128 byte FIFO allows for high speed communication even in heavy loaded systems. Unique features reduce the system load. The serial port also allows unusual speed settings like 500.000 bps. The USB PDA/Serial Adapter provides you with an external serial (DB-9 male) Plug-n-Play connection for use with computers notebooks and hand held computing devices that support USB. The PDA/USB Serial Adapter has a standard type A USB plug. Additional Features: 10 foot USB Cable length Adds one RS-232 serial port by connecting to a USB port FTDI Chipset Non-standard baud rates supported LED status indicators for TxD and RxD for easy port monitoring and diagnostic Serial port protected with surge protection of 10KV COM port number assigned can be changed to any COM port number required Works with USB 1.1 & 2.0 host port OS Support: Windows XP 2000 2003 CE Vista Windows 7 8 and 10 Linux and Mac OS 10. X Package Contents: 10 foot USB to RS-232 Serial Adapter User Guide/Instruction Manual Driver Disc
Coolgear Quad Port Serial DB-9 RS-232 Adapter Box
RoHS Compliant PRO USB serial adapter with Com port retention technology and high-speed 920K support. Industrial USB to serial converter is designed to make serial port expansion quick and simple. The USB 2.0 Quad Serial Adapter provides instant connectivity with modems ISDN TAs PDAs handheld & pocket PCs digital cameras POS serial printers. It is suitable for remote access retail and industrial applications data collection and other applications requiring high speed RS-232 serial communication ports. Features: FTDI Chipset Adds four RS-232 serial port by connecting to USB port Installed as standard Windows COM ports Full RS-232 modem control signals RS-232 data signals: TxD RxD RTS CTS DSR DTR DCD RI GND Serial ports speed up to 921.6K bps USB cable of 0.9 meter included Bus-powered. System requirement: USB host port of 500 mA. Easy plug & play installation and RS-232 device connection Works with USB 1.1 & 2.0 host port SECC sheet metal chassis with DIN rail bracket Dimensions: 167 mm x 102 mm x 29 mm 189 mm x 102 mm x 29 mm (with DIN rail bracket) Four DB9 male connectors COM Port Number can be changed to COM1 to COM4 to support Hyper Terminal or any other COM port number required Supports Windows XP VISTA 7 8 10 2003 2008 Vista
Coolgear Industrial 1 Port RS-232 DB9 Serial over Network Device Server
12V Power Adapter included Industrial 1 Port RS-232 DB9 Serial over Network Device Server designed to add a serial port over 10/100/1000Mbps Ethernet network running TCP/IP. The serial port functions as a native Windows COM port and is compatible with Windows serial communication applications. The compact RS232 serial over network device server includes the 12V power adapter with a 3-pin power plug attached. The Virtual COM port is installed in the Device Manager for the operating system. This in turn will allow communications with the connected serial device in the same manner as a device connected to the COM port on a PC. The serial port supports high serial speeds up to 921.6Kbps in RS-232 mode. The LAN becomes transparent to the serial device and the software running on the PC. The Adapter supports multiple users and multiple tasks operation over the same network. Features Extends serial communication distance. Allows the serial device to communication over a LAN or Intranet network Supports multiple users and multiple tasks operation over LAN. Supports multiple function serial port RS-232 over LAN. Installed as standard Windows COM port Provides virtual COM port same as on board COM port. Includes a 12V power adapter for operation. Access and monitor serial devices over a Manager Utility interface software. RS-232 data signals: TxD RxD RTS CTS DSR DTR DCD RI GND Industrial metal case with DIN rail mounting brackets. Supports wide input power range: DC 9V ~ DC 35V. High speed serial port with the baud rate up to 921.6K bps Non-standard baudrates supported LEDs of Power TxD and RxD for easy port monitoring and diagnostics Supports Windows 10 8 Windows 7 Vista 2003 XP
CoolGear 8-Port RS-232 PCI Express Serial Board with Oxford Chip
PCI Express 8-Port RS232 Serial Board with Oxford Chip The PCIe-8RS2 PCI Express 8-port serial I/O card is a plug & play high-speed serial I/O expansion card for PCI Express bus. The PCIe 8-port serial I/O card design utilizes the Exar XR17V358 PCI Express to UART chip. The PCIe add on card supports high-speed data rate up to 921.6 Kbps. Each serial port is compatible with 16550 UART with enhanced feature of 256-byte TX and RX FIFO buffer for higher performance. Features: PCI Express 2.0 x 1 compliant PCIe 1 Lane compliant 16C550 compatibility 256 byte receive FIFO buffer 256 byte transmit FIFO buffer for high speed data throughput Automatic RTS/CTS or DTR/DSR hardware flow control with programmable hysteresis Automatic Xon/Xoff software flow control Drivers provided for Windows and Linux O.S Wide ambient temperature operation 0°C to 60°C (32°F to 140°F) CE FCC approval Supports eight high speed RS-232 serial ports with data transfer rate up to 912.6 Kbps Provides 15KV ESD protection for all serial signals Provides eight DB-9 male connectors RS-232 data signals: DCD RxD TxD DTR GND DSR RTS CTS Includes one octopus cable with one DB-62 male connector to eight DB-9 male connectors cable. Cable length: 1 meter (OCT-8-DB9)
Coolgear USB 2.0 Over IP Device Server Share USB Over TCP/IP Network
IntroductionThe industrial-strength network-based USB Server for connecting four USB devices directly to the 10/100Mbps Ethernet network running TCP/IP. By adding this USB Server to LAN you can network-enable the USB devices and break the traditional five-meter USB cabling distance limitation. By this implementation USB devices connected to USBNET can be made available to remote clients over LAN. USB 2.0 Over IP Network 4-Port Hub share USB devices over TCP/IP network Share any USB device with others by using USB to Ethernet 4-Port Network USB Hub. Product Details: Connect to any USB device anywhere on TCP/IP network. The USB to Ethernet Connector ensures hot plug-and-play installation. Share your USB device with others over local network or Internet using single application. These USB Network hubs will automatically connect to new USB devices whenever they are plugged in. It also features network traffic encryption for sharing among secure devices. Additional Features: The NetUSB USB Server provides: RJ45 Ethernet to 4 USB ports. Allows USB Devices to be used and shared by client PCs over LAN. Access and monitor USB devices over a User-Friendly Application interface. Supports Printer Auto Connect while sharing the printer to different client PCs. OS Support: Win 7/8/10 Package Contents: USB 2.0 Over IP Network 4-Port Hub 12 Volt 1 Amp Power Supply 6 Foot USB device cable 2 Brackets Driver Disc User Guide/Instruction Manual
Coolgear White 16-inch UL Listed Power Y-Cable Computer Power Cable
Short 16 inch Y-cable Supplies power to two pieces of equipment Uses standard 3-pronge outlet or power strip Y sockets are 8 inches long UL Listed and RoHS certified UL and RoHS Certified 18AWG 3C 7.8 mm Black 8-Inch to Y and 8-inch to Socket The Power Y-Cable plugs into a standard 3-prong outlet or power strip to branch the power between two connection. Plug your computers power cable in and use the other power plug for a peripheral or another computer. The Y power cable is a heavy duty, thick 16 inch cable supporting two 8 inch socket section for power distribution. Wire is 18AWGx3C FT2 60 Degrees 204790 MSL
Coolgear 7-Port USB 3.0 Hub w/ Surge Protection 36W AC Adapter
Introduction The CG-7U3DS is a 7-Port USB 3.0 Hub that complies with the Universal Serial Bus 3.0 (USB 3.0) Specifications Revision 1.0 and performs at up to 5Gbps Super-Speed. It provides 7 downstream facing ports with standard Type-A USB 3.0 connectors. With built-in RISC-like USB 3.0 controller chips it is backward compatible either when any one of the downstream port is connected to a USB 1.1 or USB 2.0 compliant device or when the upstream port is connected to a USB 1.1 or USB 3.0 compliant host. The CG-7U3DS also provides a unique feature to work in the bus-powered mode without an external AC power adapter. It’s very convenient for light power consumption USB devices to work in this mode without an extra power supply. The external DC jack is used for self-powered mode if you need more power on the 7 downstream ports. The CG-7U3DS 7-Port USB 3.0 Hub supports 5Gbps 480Mbps 12Mbps and 1.5Mbps speeds. Features Compliant with USB 3.0 Specification Revision 1.0 Built-in RISC-like USB 3.0 Hub Controller Chips Metal Case Ideal for Critical Applications One Up-stream Port (Type-B) Support Super-speed High-speed and Full-Speed 7 Down-stream Ports (Type-A) Support Super-Speed High-Speed Full-speed and Low-speed Traffic Supports 5Gbps (Super-speed) 480Mbps (High-Speed) 12Mbps (Full-speed) and 1.5Mbps (Low-speed) Speed Supports 7 Concurrent Non-periodic Transactions Supports Self-powered and Bus-powered Mode Supports 900mA USB Bus Power for Each Port Support USB Battery Charging: CDP and DCP mode Supports 350-Watt Surge Protection for Each Port Supports DC-Jack for +12V DC Power Input Optional DIN RAIL Mounting Kit Dimensions: 152.72mm(L) x 58.96mm(W) x 24.13mm(H) (length with ears 178.21mm) Hub Weight: .625 lbs.
Coolgear Mini SAS Host PCI Adapter Bracket SFF-8087-SFF-8088 36Hx2-26TX2
The Mini SAS Host PCI Adapter Bracket (with low profile bracket) was specially designed to adapt the internal host SFF-8087 to a SFF-8088 external connector. It provides a straightforward solution to convert the internal MiniSAS port to external. Serial Attached SCSI (SAS) is a data transfer technology designed to move data to and from computer storage devices such as hard drives and tape drives.
It is a point-to-point serial protocol that replaces the parallel SCSI bus technology that first appeared in the mid 1980s in corporate data centers, and uses the standard SCSI command set. The Mini SAS (iSAS) is the newest generation of SAS standard with the smaller connector design and better locking mechanism to save space and insure reliable connections.
Features:
36-pin Host to 26-pin Target
Supports SFF-8087 Internal Connector from Host Port
Host Wiring Supports SFF-8088 External Connector to a Device I/O Hardware
Host Connector: One SFF-8087 Connector Target
Connector: One SFF-8088 Connector
Supports External SFF-8088 26-pin Connector
Supports Internal Host SFF-8087 36-pin Connector
Supports Standard and Low Profile PCI/PCe Form Factors
Supports up to 4-lane Mini SAS Channels
Supports up to 3Gb/s Mini SAS Data Transfer Rate
CoolGear 1:1 HDD COPY Adapter Dock MINI HARD DISK DRIVE DUPLICATOR & DOCK
HD Copy Box, Dual Drive eSATA and USB 2.0 Hard Drive Docking and Cloning Solution for All SATA Hard Drives ( 2.5 / 3.5 /SSD ) New Cool Gear SATA Hard drive Dock and Disk Cloning station. This SATA Hard Drive dock is ideal for techies and non-techies alike. Techies can use it in lab environments to work with lots of different drives without having to open a computer to install it, and non-techies can use it to avoid the clutter of a USB adapter. Either way it tucks away on a desk when not in use. Its smaller than a stapler! Out of Sight, Out of Mind! Supports using two disks at once too, just use the included cable and connect the second drive right to the back of the unit. No extra adapters or power cables needed! In addition it also supports disk cloning. Just drop your old disk in the dock, connect the new one to the back, hit the button, and away it goes! Better yet, your computer doesn't even need to be on for it to work!! Key Features Easy to install and remove Hard Disk Drive Available for 2 SATA hard disk simultaneously. Supports USB 2.0 to Serial interface with transfer rates up to 480Mbps Supports eSATA to SATA interface with transfer rates up to 3.0 Gbps Suitable for most 3.5 inch and 2.5 inch SATA hard drives b>Package Contents 1x 2 drive SATA Docking Station 1x Mini-CD Software 1x User Manual 1x 12v/2A AC Adapter 1x eSATA Cable 1x External SATA combo POWER/DATA cable 1x SATA to eSATA PCI Bracket 1x USB 2.0 A to Mini-B Cable
Coolgear Dual Port USB to Serial RS-232 DB-9 Adapter Cable FTDI Chip
RS-232 data & signals: TX, RX, RTS, CTS, DTR, DSR, DCD, RI, and GND. Supports 300 to 920, 000 baud (auto-sensing and self-adjusting) Supports Windows 10/7/Vista/XP/Server2003/2000/98 (32-bit), Vista/XP/7/Server2003 (64-bit), Win CE, Mac 8.6 /9. x/10. x, and Linux. Port-powered, no external power required. No IRQs required, no IRQ conflicts. The USB Serial Adapter provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a High speed and or LOW serial communications port. This adapter adds two Windows serial Com ports via it's USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port resources. Connection to USB is via a 0.9 m detachable USB cable (supplied). Features: Installed as standard Windows COM port Full RS-232 modem control signals and hardware/software flow control RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND High speed serial port with the baud rate up to 921.6K bps Non-standard baudrates supported Serial port protected with surge protection of 10KV Powered by USB port, no external power adapter required Easy plug and play installation and RS-232 device connection COM port number assigned can be changed to any COM port number required Works with USB 1.1 & 2.0 host port Windows XP, 2000, 2003, CE, Vista, Windows 7, Windows 8,, and 10 Linux and Mac OS 10. X OS Support: Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, 8, and 10 Linux and Mac OS 10. X
Coolgear Dual Port USB to Serial RS-232 DB-9 Adapter Cable FTDI Chip
The USB Serial Adapter provides instant connectivity with modems ISDN TAs PDS handheld & pocket PCs digital cameras POS serial printers etc. It is suitable for remote access retail and industrial applications data collection and other applications requiring a High speed and or LOW serial communications port. This adapter adds two Windows serial Com ports via it's USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows easy serial port expansion and requires no IRQ DMA or I/O port resources. Connection to USB is via a 0.9m detachable USB cable (supplied). Features: Installed as standard Windows COM port Full RS-232 modem control signals and hardware/software flow control RS-232 data signals: TxD RxD RTS CTS DSR DTR DCD RI GND High speed serial port with the baud rate up to 921.6K bps Non-standard baudrates supported Serial port protected with surge protection of 10KV Powered by USB port no external power adapter required Easy plug and play installation and RS-232 device connection COM port number assigned can be changed to any COM port number required Works with USB 1.1 & 2.0 host port Windows XP 2000 2003 CE Vista Windows 7 Windows 8 and 10 Linux and Mac OS 10.X OS Support: Windows 98 Me XP 2000 2003 CE Vista Windows 7 8 and 10 Linux and Mac OS 10.X
Coolgear Metal 4-Port USB 2.0 Powered Hub for Industrial Use w/ Screw Lock
The Metal 4-Port USB 2.0 Hub that complies with USB Specifications Revision 2.0 and work up to 480Mbps. It provides 4 downstream facing ports with standard A-type USB 2.0 connectors. It also supports screw-lock features for both upstream (USB type A) and downstream (USB type B) connectors with the screw-lock USB cables. It prevents from disconnecting the USB cables accidentally. With NEC uPD720114 USB 2.0 controller it works backward compatible either when any one of downstream port is connected to an USB 1.1 compliant device or when the upstream port is connected to a USB 1.1 compliant host immediately and save your investment. The USB 2.0 powered metal 4-Port USB 2.0 hub also provides a unique feature to work in the bus-powered mode without an external AC power adapter. It’s very convenient for light power consumption USB devices to work in this mode without an extra power supply. Simply plug and proceed to transfer data. Otherwise the external DC jack is used for self-powered mode if you need more power on the 4 downstream ports. Since the USB is the most popular external port for the devices to connect to PCs the powered hub provides an ideal solution to expand your USB ports immediately and save your investment.
Coolgear Industrial USB 2.0 Over IP Device Server, Share USB Devices Over TCP/IP Network
IntroductionThe industrial-strength network-based USB Server for connecting four USB devices directly to the 10/100Mbps Ethernet network running TCP/IP. By adding this USB Server to LAN, you can network-enable the USB devices and break the traditional five-meter USB cabling distance limitation. By this implementation, USB devices connected to USBNET can be made available to remote clients over LAN. USB 2.0 Over IP Network 4-Port Hub share USB devices over TCP/IP network Share any USB device with others by using USB to Ethernet 4-Port Network USB Hub. Product Details: Connect to any USB device anywhere on TCP/IP network. The USB to Ethernet Connector ensures hot plug-and-play installation. Share your USB device with others over local network or Internet using single application. These USB Network hubs will automatically connect to new USB devices whenever they are plugged in. It also features network traffic encryption for sharing among secure devices. Additional Features: The NetUSB US
Coolgear 7 Port USB 3.1 Gen1 Hub 15KV ESD Surge Protection w/Power Adapter
Compact 7 Port USB 3.1 Metal Hub With Surge Protection Coolgear's new 7 Port USB 3.1 hub is a compact solution using the newest technology. It's uniquely designed shell expands your USB port usage by 7 from your USB 3.1 Gen1 host port. This is a self powered hub uses a +7~24V DC 2-pin terminal block power connector from the external power adapter. The 7-Port USB 3.1 hub supports up to 5Gbps of data transfer but is backward compatible with legacy USB 2.0/1.1/1.0 speeds. It can horizontally surface mounted to secure a stationary mount. This USB 3.1 hub is in compliance with USB battery charging for CDP and DCP modes. The hub supports 1.5A per port with a safety of 2A Thermal Shutdown protection. 7-Port USB 3.1 Hub Features Compliant with USB 3.1 Gen1 Specifications Rigid Wall-Mountable Metal Case 1 USB-B Upstream and 7 USB-A Downstream USB 3.1 Gen1 Facing Ports Supports 5Gbps (Super-speed) 480Mbps (High-speed) 12Mbps (Full-speed) and 1.5Mbps (Low-speed) Speed Supports 15KV ESD Surge Protection for Each Port Multi Transaction Translators (TT) per Hub Support USB Battery Charging: CDP and DCP Modes Supports Surface Mounting 1.5A per USB port with thermal shutdown at 2A per port Item Dimensions: 6.03 in(L)(7.14 w/ears) x 2.34 in(W) x 1.05 in(h) Package Contents 7-Port USB 3.1 Metal Hub 6ft. USB-A to B USB 3.0 Cable Power Adapter & Cord Paper Installation Guide Environmental Specifications Operating Temperature: 0 to 55 degrees C (32 to 131 degrees F) Operating Humidity: 5 to 95% RH
Coolgear 12-Port USB 3.1 Gen1 w/15KV ESD Surge Protection DIN Rail Mount
Compact 12-Port USB 3.1 Metal Hub Coolgear's new and unique 12-Port USB 3.1 hub is a compact solution with a big purpose. Its uniquely designed shell expands your USB port usage by 12 from your USB 3.1 Gen1 host port. This is a self powered hub uses a +7~24V DC 2-pin terminal block power connector from an external power adapter (sold separately). The 12-Port USB 3.1 hub supports up to 5Gbps of data transfer but is backward compatible with legacy USB 2.0/1.1/1.0 speeds. It can be DIN Rail or horizontally surface mounted to secure a stationary mount. This USB 3.1 hub is in compliance with USB battery charging for CDP and DCP modes. The hub supports 1.5A per port with a safety of 2A Thermal Shutdown protection.12-Port USB 3.1 Hub Features Compliant with USB 3.1 Gen1 SpecificationsRigid Wall-Mountable Metal Case1 USB-B Upstream and 12 USB-A Downstream USB 3.1 Gen1 Facing PortsSupports 5Gbps (Super-speed) 480Mbps (High-speed) 12Mbps (Full-speed) and 1.5Mbps (Low-speed) SpeedSupports 15KV ESD Surge Protection for Each PortMulti Transaction Translators (TT) per HubSupport USB Battery Charging: CDP and DCP ModesSupports DIN RAIL Mounting Kit and Horizontal Mounting Bracket1.5A per USB port with thermal shutdown at 2A per portItem Dimensions: 5.22 in(L) x 2.56 in(W) x 1.89 in(h) (132.50 x 65 x 48.2mm) Package Contents12-Port USB 3.1 Gen1 Metal Hub6ft. USB-A to B USB 3.0 CableHorizontal Mounting Plate w/ScrewsDIN Rail ClipPaper Installation GuideEnvironmental Specifications Operating Temperature: 0 to 55d egrees C (32 to 131 degrees F)Operating Humidity: 5 to 95% RH
Coolgear 4 Port Type-C USB 3.1 Gen2 Hub VLI Chip with AC adapter included
4 Port Type-C USB 3.0 Super-Speed Plus Hub The USB 3.0 Type-C Hub is a light weight hub with a DIN Rail Mounting Kit. This hub supports USB 3.1 Super-Speed Plus (10Gbps data transfer) with (2) USB Type-A female and (2) USB female Type-C downstream ports. NOTE: Asus motherboards not recommended for use with this hub The USB 3.0 Type-C Hub uses a 2-pin terminal block connection for input power of +7 - 24V DC for the downstream facing ports (power supply is included). It is backward compatible with 5Gbps (Super-Speed) 480Mbps(High-Speed) 12Mbps(Full-Speed) and 1.5Mbps(Low-Speed) data rates. The plastic Mounting plate for the DIN Rail Clips snaps on to the bottom of the hub for secure mounting. Upstream information is carried with the USB-C connection on the back panel of the hub. 4 Port Type-C USB 3.0 / 3.1 Hub Features Compliant with USB 3.0 / 3.1 Gen2 Specifications Rigid plastic Wall and DIN Rail Mounting Case. Provides 4 (2 USB-C and 2 USB-A) Downstream facing USB 3.1 Ports Supports 10Gbps(Super-Speed Plus) 5Gbps (Super-Speed) 480Mbps(High-Speed) 12Mbps(Full-Speed) and 1.5Mbps(Low-Speed) data rates Multi Transaction Translators (TT) per Hub Support USB Battery Charging: SDP CDP and DCP modes Built with the VLI VL820-Q8 chip Item Dimensions: 152.04mm(L) x 62.45mm(W) x 30mm(H) - 152.04mm(L) x 67.67mm(W) with 2-pin connector x 34.25(H) with mounting plate Environmental Specifications Operating Temp: 0 to 70 C (32 to 158 F) Operating Humidity: 5 to 95% RH In The Box USB 3.1 Gen2 Type-C 4 Port Hub 3ft. USB-C Male to Male Gen2 Cable Wall and DIN Rail Mounting Plate Power Supply 4 rubber foot pads DIN Rail Mounting Kit Paper User Manual
CoolGear® Industrial USB 2.0 Over IP Network 4-Port Hub, Share any USB Device Over TCP/IP Network
USB Device Sharing over TCP/IP Network The USBNET USB 2.0 Over IP Network 4-Port Hub is an industrial-strength network-based USB Server for connecting four USB devices directly to the 10/100Mbps Ethernet network running TCP/IP. By adding this USB Server to LAN, you can network-enable the USB devices and break the traditional five meter ( 16.5 feet) USB cabling distance limitation. By this implementation, USB devices connected to the 4-Port USB 2.0 Over IP Network Hub can be made available to remote clients over LAN. The USB 2.0 Over IP Network 4-Port Hub shares USB devices over the TCP/IP network, Share any USB device with others by using USB 2.0 networking hub. Connect to any USB device anywhere on TCP/IP network. The USB to Ethernet Connector ensures hot Plug-and-Play installation including support for Isochronous devices. Cross-connectivity: ability to connect to a USB device which is shared on x64 PC from Windows XP x32, and vice versa new! The shared USB ports on the device are automatically re-configured. This device is fully compatible with Windows XP/x64/Vista/7. Currently supports OHCI, UHCI and EHCI standards. This device is also fully compatible with hyper threaded and multiprocessor systems. Additional Features Extends USB cabling distance beyond five meters. Allows USB Devices to be used and shared by client PCs over LAN. Supports wide variety of USB devices. Supports Printer Auto Connect while sharing the printer to different client PCs. Compatible with bulk, interrupt and isochronous type USB devices. Provides Plug and Play function same as on board USB port. Access and monitor USB devices over a User-Friendly Application interface. Industrial metal case. Supports wide input power range: DC 9-30V specification The Net USB USB Server provides: RJ45 Ethernet to 4 USB ports. Allows USB Devices to be used and shared by client PCs over LAN. 4 USB 2.0 High Speed Ports up to 480Mbps speed. Full 500mA power provided to each USB port. USB port supports over current protection. Supports wide variety of USB devices. 10BaseT/100Base Tx Fast Ethernet support. Supports IP addressing as Static or by DHCP. LEDs for system/Ethernet/USB ports. Field-upgradeable firmware. Supports Reset button for system reset. Supports Default button for configuration to default setting. Industrial metal case. Input power range: DC9V~DC30V. Compatible with Windows XP/2003 Server/Vista or greater. Regulatory approvals: FCC Class B (DoC) and CE. RoHS compliant. Supported Devices Cameras Scales Barcode Scanners Cash Registers IO Devices Scanners Webcams USB Hard Drives USB RAID USB Storage MULTI Function Printer Devices Multi-functionals Handhelds USB to Serial RS-232/422/485 Cables Card Readers Fingerprint Readers
Coolgear 7-port USB-C 3.2 Hub w/ 15KV ESD Surge Protection DIN RAIL Mount
The CG-7U3CML is a 7-port Type-C USB3.2 Gen 1 Metal Hub that complies with the Universal Serial Bus (USB) Specifications Revision 3.1 Gen 1 and works up to 5Gbps. It provides 1 USB-C upstream port and 7 USB-C downstream facing ports. The CG-7U3CML provides a unique self-powered mode working with a wide range (+7~48V DC) input DC power from its terminal blocks and DC jack connectors. It supports fast USB charging specifications by turning its downstream ports from a Standard Downstream Port (SDP) into a Charging Downstream Port (CDP) or a Dedicated Charging Port (DCP). Features: Compliant with USB3.2 Gen 1 Specifications 1 upstream USB-C and 7 downstream USB-C connectors Power connectors: terminal blocks and DC jack +7~48V DC wide range power input Supports USB-C screw-lock cables Support speeds: 5Gbps (Super-speed) 480Mbps (High-speed) 12Mbps (Full-speed) and 1.5Mbps (Low-speed) Supports 15KV ESD surge protection for each port Supports fast USB Battery Charging: CDP and DCP modes Provides 0.9A each for all 7 USB downstream ports Supports wall and DIN RAIL mounting options Package Contents: USB 3.2 Gen 1 Type-C Hub Din rail clip and screws 2 Pin phoenix connector 3' Screw lock USB-C to USB-C cable
Coolgear FTDI Chip with TX/RX LED USB 4 Port Serial DB-9 RS-232 Adapters for Vista and More
Introduction Retail POS terminals at sales counters such as those in banks and grocery stores are essentially a PC in a custom case attached to printers scanners and displays. Some of the peripherals are integrated into the POS terminal such as the keyboard cash drawer simple pole display and receipt printer. Others are external to the terminal such as scales large flat panel pole displays credit card readers and bar code scanners. This PRO Grade Adapter is build around FT4232H from FTDI Semiconductors which is the best and most reliable Quad Serial to USB processors on the market it also uses ZT232E RS232 transceiver from ZyWyn USA. USB cable is 6ft Total Length with Port Identification marks on each of the DB9 Male ends. The upstream (USB type B connector) port supports USB 2.0 High-Speed mode to prevent from the bottleneck when all serial ports are transferring data simultaneously. The USB-4X232FTDI provides the scalability to quickly adapt to new USB technologies. Multiple modules can be added to a single USB interface allowing you to add RS232 connectivity as needed. Complete product line offer many choices help you to expand and make your network grow with your requirements. With the USB Plug-and-Play feature simply plug in follow the instructions of Install Wizard then you are done. You don't have to deal with Card Slots I/O address IRQ jumpers DMA and others when you are connecting the devices. The System will recognize the device and install the drivers automatically. The USB-4X232FTDI is an ideal solution for your expanding applications.
Coolgear USB C to VGA Female Adapter 6 Inches White Works with MackBook, Chromebook Pixel and Other VGA Based Displays
Converts a USB-C connection to a VGA video outputSupports video resolutions of up to 1920×1200 and Full HD 1080p video playbackSmall compact design make it great for travelIncorporates the USB-C connector with reversible orientationFeatures Plug-N-Play operation for easy installUSB C to VGA Female Adapter CoolGear's new USB C to VGA adapter is a great hardware adapter solution for converting a USB-C connection to a VGA video output giving the ability to connect your USB-C based device like the Apple MacBook, Google Chromebook Pixel and the Nokia N1 Tablet to any VGA based display, projector or HDTV. USB C to VGA Resolution Support It supports video resolutions of up to 1920×1200 and Full HD 1080p video playback.The result is extraordinarily clear imagery when used to display presentations on a projector, reviewing documents on a high-resolution desktop monitor, or playing back high-definition video on an HDTV. Versatility and Connection USB-C has a reversible connector allowing for hassle-free operation by allowing you to simply connect your adapter, meaning that no matter how you plug it in, your adapter will always work. Including its ability to deliver power to connected devices, the adapter supports Plug-N-Play operation meaning that there are no cumbersome software/device drivers that need to be installed or external power supply to plug in to operate.
Coolgear USB 2.0 to Serial High-Speed RS-232 Industrial Adapter Metal case with DIN-Rail Bracket
The high-speed USB to serial adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub the USB Dual Serial Adapter instantly adds one RS-232 serial communication port to your system. By taking advantage of the USB bus the USB to Serial Adapter makes it easier than ever to add a serial port and serial devices to your system with easy plug-and-play and hot plug features. By plugging the USB to Serial Adapter to the USB port the adapter is automatically detected and installed. There are no IRQ & COM port conflicts since the ports do not require any additional IRQ DMA memory as resources on the system. The USB Quad Serial Adapter is self-powered and one external power adapter is included. This USB to Serial Adapter provides instant connectivity with modems ISDN TAs PDAs handheld & pocket PCs digital cameras POS serial printers. It is suitable for remote access retail and industrial applications data collection and other applications requiring high speed RS-232 serial communication ports.
Coolgear USB-C 4-Port Hub w/Power Delivery & 15KV ESD Surge Protection USB 3.2 Gen1
USB 3.0 4 Port Hub with Power Delivery Coolgear’s USB 3.0 4 port hub with USB-C power delivery source operation supporting 20V/14.5V/12V/5V power range. The USB-C power delivery hub protects your USB 3.0 devices with 15KV ESD surge protection. It is constructed with a metal case for industrial and commercial use power is obtained through the 19-20V power input at the barrel connector or 2-wire terminal connector. Supports MacBook Chromebook and other USB C Laptops. The USB 3.0 4 port Hub includes 2 USB-C PD-Source ports and 3 USB 3.0 / 3.1 USB Type-A ports. The LED power indicator is built-in showing power to the hub is active and ready to use. Use this USB Type-C hub where power delivery is required to charge mobile phones or tablets while connected to you USB-C enabled Laptop. Mounting can be done on any flat surface i.e. wall table top under table. USB-C Power Delivery 4 Port Hub Features USB 3.0 / 3.1 Compliant to Gen1 Specifications Suports USB-C PD (power delivery) source features Up stream female port: 1x USB-C PD USB 3.0 /3.1 Gen1 Connector Down stream female port: 1x USB-C PD and 3x USB-A connectors USB-C PD Source Modes: 20V/14.5V/12V/5V Metal case and Screw Lock for critical applications Supports 5Gbps 480Mbps 12Mbps and 1.5Mbps speeds Power input requirement: +19-20V DC
CoolGear SATA II SATA-Pro MultLane Host Adapter 4X SATA drive JBOD RAID 0/1/10 for Windows only
Serial ATA II PCI-X RAID Host Adapter to accommodate Serial ATA II devices and RAID sub-systems with the new technology of RAID 0 (striping) and RAID 1 (mirroring) and RAID 0+1 (Striping and Mirroring) features. Any system with a PCI-X and PCI buses interface can simply add the Serial ATA II devices by simply adding this controller and loading the drivers and utility into the system. The serial link employed is a high-speed differential layer that utilizes Gigabit technology and 8b/10b encoding. The current data rate is 3.0G b/s. The CG-SA3544A supports external 4 SATA2 devices over its Infinite Band 4X connector. Features Built-in SiI3124-2 Chip Provides 4 Serial ATA II Ports One InfiniBand MultiLane 4X Connector for 4-Port External SATA2 Devices Supports RAID 0 (striping) 1 (mirroring) and 0+1 133MHz PCI-X Data Transfer Rate up to 1.064GB /S Supports SATA II Rate up to 3.0G b/s Optional bracket for Low Profile PCI form factor Available (large OEM Orders only) Supports Serial ATA II Port Multiplier Specifications Supports Serial ATA II Native Queuing ROM BIOS supports RAID setup and Boot Features Supports up to Hard Drives over 137GB Supports Windows NT 4.0 2000 XP 2003 Linux Specifications System For 32/64-bit PCI/PCI-X 133MHz Bus Systems PCI Interface Fully PCI-X Specifications 1.0 a Compliant Serial ATA II Ports 4 External Serial ATA II ports which fully support devices up to 3.0G b/s transfer rate: Supports RAID 0 (performance) and RAID 1 (data security) and RAID 0+1 features. Supports hard drives greater than 137GB Supports 4 External SATA II devices with 3.0G b/s rate Supports Port Multiplier and Native Queuing
Coolgear 72 inch DB-9 Serial Adapter High Speed USB SERIAL RS-232 With Prolific Chip (Pl-2303HX)
Introduction: The 72 inch DB-9 serial adapter is perfect for Laptop/Desktop/Mobile computer users that require an RS-232 connection without the extra cable length. This cable features RX/TX and Power LEDs and utilizes the Prolific Chipset. Want to connect your GPS to your PC but don’t have a 9-pin serial port connection? This cable will get you hooked. Using this converter cable and the PC interface for your application you can transfer maps waypoints routes and tracks between Map Source and your GPS. Product Details: Connect any serial device to a USB port with this HP USB to Serial DB9 Adapter. It features USB Type A to 9-pin serial adapter! This USB to Serial Cable provides you the simplest way to attach your Notebook or Desktop computer to a serial modem mouse or PDA cradle. It features Plug and Play capabilities for your peripherals such as: PDA Cradles modems mice card readers barcode readers label writers digital cameras security systems fingerprint verification and more. Additional Features: Adds one RS-232 serial port by connecting to a USB port Prolific Chipset 72 inch USB Cable length Compact size cable type converter with cable length of 185 cm LED status indicators for TxD and RxD for easy port monitoring and diagnostic High speed serial port with the baud rate up to 921.6K bps Full RS-232 modem control signals and hardware/software flow control Serial port protected with surge protection of 10KV OS Support: Windows 98 Me XP 2000 2003 CE Vista Windows 7 and Windows 8 Linux and Mac OS 10. X
Coolgear 36 inch DB-9 Serial Adapter High Speed USB SERIAL RS-232 With Prolific Chip (Pl-2303HX)
Introduction: The USBG-RS232-P36 is perfect for Laptop/Desktop/Mobile Computer users that require an RS-232 connection without the extra cable length. This cable features RX/TX and Power LEDs and utilizes the Prolific Chipset. Want to connect your GPS to your PC but don’t have a 9-pin serial port connection? This cable will get you hooked. Using this converter cable and the PC interface for your application you can transfer maps waypoints routes and tracks between Map Source and your GPS. Product Details: Connect any serial device to a USB port with this HP USB to Serial DB9 Adapter. It features USB Type A to 9-pin serial adapter! This USB to Serial Cable provides you the simplest way to attach your Notebook or Desktop computer to a serial modem mouse or PDA cradle. It features Plug and Play capabilities for your peripherals such as: PDA Cradles modems mice card readers barcode readers label writers digital cameras security systems fingerprint verification and more. Additional Features: Adds one RS-232 serial port by connecting to a USB port Prolific Chipset 36 inch USB Cable length Compact size cable type converter with cable length of 92 cm LED status indicators for TxD and RxD for easy port monitoring and diagnostic High speed serial port with the baud rate up to 921.6K bps Full RS-232 modem control signals and hardware/software flow control Serial port protected with surge protection of 10KV OS Support: Windows 98 Me XP 2000 2003 CE Vista Windows 7 and Windows 8 Linux and Mac OS 10. X
Coolgear Windows 7/8 Compatible 12 inch FTDI CHIP DB-9 Serial Adapter High Speed USB SERIAL RS-232
Introduction:The USBG-RS232-F12 is perfect for Laptop/Desktop/Mobile Computer users that require an RS-232 connection without the extra cable length. This cable features RX/TX and Power LEDs and utilizes the FTDI Chipset. Want to connect your GPS to your PC but don’t have a 9-pin serial port connection? This cable will get you hooked. Using this converter cable and the PC interface for your application you can transfer maps waypoints routes and tracks between MapSource and your GPS. Product Details: Connect any serial device to a USB port with this HP USB to Serial DB9 Adapter. It features USB Type A to 9-pin serial adapter! This USB to Serial Cable provides you the simplest way to attach your Notebook or Desktop computer to a serial modem mouse or PDA cradle. It features Plug and Play capabilities for your peripherals such as: PDA Cradles modems mice card readers barcode readers label writers digital cameras security systems fingerprint verification and more. Additional Features Adds one RS-232 serial port by connecting to a USB port FTDI Chipset 12 inch USB Cable length Compact size cable type converter with cable length of 25 cm LED status indicators for TxD and RxD for easy port monitoring and diagnostic High speed serial port with the baud rate up to 921.6K bps Full RS-232 modem control signals and hardware/software flow control Serial port protected with surge protection of 10KV OS Support Windows XP 2000 2003 CE Vista Windows 7 Windows 8 10 Linux and Mac OS 10.X
USBGear 12 Volt USB hub Industrial 4-Port USB 2.0 Powered Hub for PC-MAC DIN-RAIL Mount
USB Hub 4 Port with Din Rail Mounting The USB 2.0 4 port hub is a 12 volt Hi-Speed hub that is backward compatible with USB 1.0 and 1.1. It provides an out of the box industry standard that allows connection of up to four USB peripherals or devices to your USB ready PC or Mac. Peripheral examples may include: External USB hard drives thumb drives digital camera or other USB 2.0 devices. Designed for quick and easy access the USB 4 port hub provides four type “A” female downstream ports for connecting USB 2.0 peripherals or other USB hubs. A single type “B” female upstream port connects the hub to the host computer or another USB hub. The USB 12 Volt hub enables up to 127 devices to be connected by cascading multiple hubs. Configured directly by the operating system the USB 2.0 hub 4 port hub operates seamlessly with both Windows Mac and Linux systems. USB 4 Port Hub Features: Compliant with USB 2.0 specs. Buffers USB data from any attached peripheral in compliance with USB specifications. The USB 4 port hub is backward compatible with low speed 1.5 Mbps and full speed devices. Diagnostic LEDs provide port status for each port and power status. Works with Windows Vista Windows 7 and Windows 8 Linux and Mac OS 10.X Item dimensions: 3.72 in (L) x 2.26 in (W) x 1.03 in (H) (11.45×5.73×2.63 cm) (length with ears 4.50 in). Supports self-power and bus-power. Package Contents: 4 Port USB 2.0 Hub 3 foot USB A to B Device cable. DIN Rail Clips User guide/Instruction Manual
USB 2.0 Over IP Network Industrial 4-Port Hub – TCP/IP Network
Share USB Devices over TCP/IP Network With built-in high performance processor support enables 4 high speed USB 2.0 ports to connect a wide range of USB-based devices to a Gigabit Ethernet network or Internet. It allows multiple USB devices to be shared with many client PCs over Internet. USB 2.0 Over IP Network device provides scalability to quickly adapt to new USB Technology. It supports screw-lock features for the downstream (USB type A) connectors with the screw-lock USB cables. It prevents accidental disconnection from the USB cables while processing Data during operation. USB 2.0 Over IP Network Hub includes Plug and Play features for on-screen installation instructions making easy work of connecting your device without conflicts. Additional Specifications Gigabit Ethernet Port: IEEE 802.3 compliant 10/100/1000Mbps Ethernet Port with full duplex operation Supports Auto-Cross Feature for Ethernet different Cables USB Ports: Fully compatible with USB 1.0 and USB 1.1; Forward compatible with USB 2.0, the USB connector equips the Screw Lock Mechanism Supports 4 High Speed USB ports (USB 2.0 ) Supports Screw Lock Mechanism for USB Connectors Supports USB Bus Power Backward Compatible with USB 1.1 Devices Compatible with bulk, interrupt and isochronous type USB devices Features Provides 4 USB 2.0 Host Ports over Ethernet or IP Allows Working With Remote USB Devices as with local ones Multiple USB Devices Can Be Shared on Server Supports USB Devices Safe Removal function Auto Sharing of New USB Devices Works in USB Hub Mode or Ethernet Mode, USB Devices Can Be Switched to USB or Ethernet Host Metal Case and USB Screw Lock Mechanism enhances the Reliability IEEE 802.3 10/100/1000Mbps, Auto Cross-over Ethernet Port Compatible with Bulk, Interrupt and Isochronous Type USB Devices Supports High Speed/Full Speed USB 2.0 Peripherals DC Jack for DC 7~24V Power Input User-Friendly Web and PC GUI Interface Environmental Operating Temp.: 0° to 55°C (32° to 131°F) Storage Temp: -20° to 85°C (-4° to 185°F) Operating Humidity: 5 to 95% RH
USB C with PD PoE Splitter for Nest Cam Outdoor & Nest Cam Indoor
Coolgear’s new CG-POE15VPD USB C with PD (power delivery) PoE Splitter for Nest Cam Outdoor & Nest Cam Indoor. This is a remote USB Type C PD Power over Ethernet device to use with any Active or Passive PoE Switch. It’s designed to provide power at 15Volt PD profile to All PD Nest Family Cameras with type C port. The isolated design has your safely in mind with thermal protection as well as over voltage and current protection. With our Mini USB PD PoE splitter you can power your Nest Cam directly with your Ethernet cable, bypassing the bulky A/C adapter. The CG-POE15VPD POE to USB C DC/DC converter also has built-in output overload, short-circuit protection. This USB C PD module is specifically designed for 15Volt USB PD profile used in Google Nest Camera. The USB C with PD PoE adapter provides a 1500VDC (input to output) isolation barrier and has ESD protection for an All-In- One mini size adapter. USB C with PD PoE Features Smallest USB C PD adapter in the world. 60% smaller than any other PoE to USB type C solution. Overload & short-circuit protection. Industrial temperature operation. Has a maximum ambient operating temperature of 78°C. Made to withstand harsh environments. 9-12Watt PD profile specifically designed for Nest Camera 15Volt PDO. Power Input: PoE PD IEEE 802.3 af compliant POE Power Output: USB Type C PD. Status LED. High efficiency DC/DC converter. Specifications Dimensions: 54mm (L) x 29mm (W) x25mm (H) Fully IEEE 802.3 at and IEEE 802.3 af compliant POE. Class 0 ( 0.44 Watts to 12.95 Watts) USB type C PD 9-12Watt PD profile specifically designed for Nest Camera 15Volt PDO. 1500VDC isolation (input to output). Class 0 signature.
