Optional Power Adapter for Fiber Optic Extenders
Power Supply for FO-DVI and FO-HDMI Products (Not for FO-DVI-DL-330 and FO-1394-Set)
1 X 4 VGA & Audio Distribution Amplifier over CAT5
The Avenview VGA-C5-SP-4, VGA-C5-SP-8, VGA-C5-SP-16, VGA and Audio over CAT5 Transmitter / Splitter provides the most flexible solution by which the high resolution PC video and high quality stereo audio can be transmitted to different locations over super long distances. Built with 2 VGA and digital/analog audio loop outs, local A/V receivers can provide extra video and audio fan-outs through typical VGA, SPDIF, and analog audio cables. The high bandwidth VGA can be transmitted up to 65 meters (210 feet) on the local ports. The VGA-C5-SP-4, VGA-C5-SP-8, VGA-C5-SP-16 also extends VGA and stereo audio source up to 330 meters (1000 feet) through cost effective CAT-5 LAN cables. Accompanying the receivers of VGA-C5A-R VGA CAT5 extender series equipped with the equalization, gain control and de-skew functions, the video and audio quality can be further assured and make the quality of overall transmission superior than the other VGA splitters on the market.
Avenview FO-HDM4K-30-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/30m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
1 X 8 VGA & Audio Distribution Amplifier over CAT5
he Avenview VGA-C5-SP-4, VGA-C5-SP-8, VGA-C5-SP-16, VGA and Audio over CAT5 Transmitter / Splitter provides the most flexible solution by which the high resolution PC video and high quality stereo audio can be transmitted to different locations over super long distances. Built with 2 VGA and digital/analog audio loop outs, local A/V receivers can provide extra video and audio fan-outs through typical VGA, SPDIF, and analog audio cables. The high bandwidth VGA can be transmitted up to 65 meters (210 feet) on the local ports. The VGA-C5-SP-4, VGA-C5-SP-8, VGA-C5-SP-16 also extends VGA and stereo audio source up to 330 meters (1000 feet) through cost effective CAT-5 LAN cables. Accompanying the receivers of VGA-C5A-R VGA CAT5 extender series equipped with the equalization, gain control and de-skew functions, the video and audio quality can be further assured and make the quality of overall transmission superior than the other VGA splitters on the market.
DVI-D Fiber Optical Cable - 20M (66Ft) HDCP Compliant
The DVI-D Fiber Optical Extension Cable locates a single link digital DVI display up to 20 meters (66 feet) from a computer with no loss of signal - delivering crystal clear digital images instantly. The cables are an integrated DVI-D cable solution, which includes the fiber optics components and the DDC signals built into the cable and the DVI connectors. The DVI-D Fiber Optical Cables are the ideal solution for a wide range of applications. Examples include:•Video wall System•Large LED Sign Board•Medical Imaging Equipment•Airplane On-board Video System•Home Theater•TV Broadcast Station•Auditorium•Conference Room Video Equipment
Avenview HDM-C6MWIP-R-V3 H.264/1080p RX/Decoder for Video Wall/Matrix w/3-Yr Warranty
Avenview HDM-C6MWIP-R-V3 H.264/1080p Receiver/Decoder for Video Wall/Matrix features a Cat 5e/6 LAN input and HDMI 1.3 output and can be run point-to-point direct from an encoder or point-to-multi from a network switch up to 330' away.
The receiver/decoder unit supports up to 1080p60 on input and output, auto scaling and rotation, automatic format detection, live preview, HDCP 1.4, and the full system uses H.264/MPEG-4 AVC video compression. It can be powered using the included 12 VDC international power adapter or by using your existing PoE (Power-over-Ethernet) network. You can also de-embed analog audio from the encoder using the stereo terminal block output. To configure the unit you can utilize telnet, a web GUI, or you can utilize serial controllers via an API using the RS-232 terminal block.
Avenview HDM-C6MWIP-R-V3 H.264/1080p Receiver/Decoder for Video Wall/Matrix Features:
Supports live IP video stream decoding at resolutions from 720 x 480p60 to 1920 x 1080p60
Supports POE (Power-over-Ethernet) and Cat 5e/6 cable up to 330'
Allows video previewing via iPad App and Windows 7/10 software at 352 x 288 at 5 Hz
CEC Function
Supports HDMI and DVI input via IP network
Supports analog audio de-embedding over stereo terminal block output
Built-in auto-scaling and rotation
Supports H.264, TCP/IP, Telnet, UDP, and IGMP 2.0
Support for Telnet, Web GUI control, and third-party control systems API commands via RS-232
Supports Auto IP, zero-configuration networking
Seamless switching, no black screen, no frame lock
Automatic input format detection
HDCP 1.4 compliant
Supports video wall up to 16 x 16
Reset button on unit
DVI-D Fiber Optical Cable - 25M (82Ft) HDCP Compliant
The DVI-D Fiber Optical Extension Cable locates a single link digital DVI display up to 25 meters (82 feet) from a computer with no loss of signal - delivering crystal clear digital images instantly. The cables are an integrated DVI-D cable solution, which includes the fiber optics components and the DDC signals built into the cable and the DVI connectors. The DVI-D Fiber Optical Cables are the ideal solution for a wide range of applications. Examples include:•Video wall System•Large LED Sign Board•Medical Imaging Equipment•Airplane On-board Video System•Home Theater•TV Broadcast Station•Auditorium•Conference Room Video Equipment
Avenview FO-HDM-25-MM HDMI Fiber Optical Cable (25m/88ft) HDCP Compliant
DESCRIPTION Avenview HDM Extender, FO-HDM-10-MM Series with fiber optic cable system lets you extend HDTV signal from HDMI source to up to 25 meters (88 feet) at 1080p without signal degradation High Speed and long distance transmission by Optical fiber Fully compatible with HDMI 1.3 Supports 12 bit Deep Color Uses standard Type A HDMI receptacle DDC and CEC signal and 5V power line are transmitter by copper line HDCP Compliant SPECIFICATIONS
4 Port Dual Image Cascadable Videowall
The DVI-VIDEOWALL-4X Display Dual-Image Video Wall Processor (Video Wall Controller) is a powerful and fully real time data/video processor for multiple flat panel displays or projectors. With the most flexibility on the input side, the unit accepts VGA, DVI, CVBS, S-Video, and YPbPr and splits the input onto the connected 4 displays. The DVI-VIDEOWALL-4X can display up to 2 video inputs from the front end video mixer. Thru DVI transmission, the quality of the outcome videos is guaranteed. The output display is grained up to 255 by 255 squares. Virtually any setups for the display layout can be possible by the provided software.
Avenview FO-HDM4K-200-EMIX-R 4K 60Hz/HDR HDMI Extender (Receiver) Single SC Fiber Optic Cable OM4
This listing is for FO-HDM4K-200-EMIX-R only. Use description below as a general reference. Avenview FO-HDM4K-200-EMIX-SET Extender set over single SC optical fiber cable has been designed to extend 4K (4096x2160 @60Hz) video and multi-channel audio formats to any 4K compatible monitor up to 200m. Video Signals: 4K@60 Hz (4096x2160), 4k2k@60 (UHD 3840x2160) , 3D and full HD 1080p@60 Hz. The FO-HDM4K-200-EMIX-SET includes two (2) units: Sender unit (TX) FO-HDM4K-200-EMIX-S and Receiver unit (RX) FO-HDM4K- 200-EMIX-R with one (1) FTP output port which allows the user to extend video and audio up to 200m (650ft). The FO-HDM4K-200-EMIX-SET input and output supports HBR2 cable assembly to handle upto 5.4Gbps/lane data rate (18 Gbps). New box type design which can be easily installed into any enviroment, behind the monitor and rack mounted on a rack shelf; this compact design gives the installer and user a complete solution with the new trends in rack mounted 4K sources streaming, network connected devices and new demand in Smart TV, ultra HD monitors and content. Features: Extends 4K HDMI signal up to 200 meters (650ft); Supports resolution up to 4K (4096X2160) @ 60Hz; Signal transmission through one SC terminated Multimode fiber optic (OM3); HDMI Ver.2.0 Compliant; HDCP Cpompliant; Real EDID transmission; CEC Compliant; Supports SCDC (Scrambling) function; Compact Design.
Avenview FO-HDM4K-200-EMIX-SET 4K@60Hz HDMI 2.0 Extender over Single SC Fiber Optic Cable - w/3-YR Warranty
This Avenview FO-HDM4K-200-EMIX-SET 4K@60Hz HDMI 2.0 Extender over Single SC Fiber Optic Cable has been designed to extend 4K (4096x2160 @60Hz) video and multi-channel audio formats to any 4K compatible monitor up to 200m..
Video Signals: 4K@60 Hz (4096x2160), 4k2k@60 (UHD 3840x2160) , 3D and full HD 1080p@60 Hz. The FO-HDM4K-200-EMIX-SET includes two (2) units: Sender unit (TX) FO-HDM4K-200-EMIX-S and Receiver unit (RX) FO-HDM4K- 200-EMIX-R with one (1) FTP output port which allows the user to extend video and audio up to 200m (650ft). The FO-HDM4K-200-EMIX-SET input and output supports HBR2 cable assembly to handle upto 5.4Gbps/lane data rate (18 Gbps)..
New box type design which can be easily installed into any enviroment, behind the monitor and rack mounted on a rack shelf; this compact design gives the installer and user a complete solution with the new trends in rack mounted 4K sources streaming, network connected devices and new demand in Smart TV, ultra HD monitors and content..
Extends 4K HDMI signal up to 200 meters (650ft)
Supports resolution up to 4K (4096X2160) @ 60Hz
Signal transmission through one SC terminated Multimode fiber optic (OM3)
HDMI Ver.2.0 Compliant
HDCP Cpompliant
Real EDID transmission
CEC Compliant
Supports SCDC (Scrambling) function
Compact Design.
4X1 HDMI Switch with IR and RS232 Control
The SW-HDM-4X1 HDMI Switcher with IR and RS232 Control provides THREE simple and effective ways of switching among 4 HDMI sources to your HDMI/DVI enabled HD display. This device has Auto-scan and Auto-detection function which provides quick surf on the connected sources sequentially and automatically switches to the first working source among 4 channels at power on. With IR remote control, front panel button and RS232; this allows users to display any of the 4 sources they choose. Connecting PS3, DVD players, camcorders, or set-top boxes can be easily and simultaneously done with built-in HDCP support; allowing any device to be connected to the SW-HDM-4X1.
Avenview HDM2-SPLITPRO-T4K-V2 HDMI 2.0a 4K@60 Quad Multiviewer w/3-Yr Warranty
Avenview HDM2-SPLITPRO-T4K-V2 HDMI 2.0a 4K@60 Quad Multiviewer w/Rotation & Usb Video Capture was developed for the purpose of supporting higher input and output resolutions up toKEY_TAB (4K@60)KEY_TAB for multiple sources on a single screen with built in USB 3.0 FHD video capture to output 4K video to a computer.
This HDMI device can accept 4 HDMI 4K input digital sources and combine (4) four video signals onto a single HDMI UHD or HD monitor The user can easily manage each input via the supplied Control Software and create any layout and position of any of the 4 (four) Inputs on a single monitor. This device supports full range of input video resolutions up to 4K and audio RCA breakout supported for external audio distribution systems. Audio channels can be selected to playback with input or can be muted.
Fast Switching & ndash;KEY_TAB This device can input any 4 HDMI input digital sources and then combine, (4) four video signals onto a single HDMI UHD monitor. The user will benefit with from its processing power to switch between the 8 user defined function using control software via Ethernet or RS232, cloud, 4 IR Remote preset.
Crop & ndash;KEY_TAB This device can Crop any 4 HDMI input digital sources to remove black bars and then combine, (4) four video signals onto a single HDMI HD monitor. This device can be configured using the supplied Control software via Ethernet or RS232 to set the desired layout on the connected screens.
Window Scale and Position & ndash;KEY_TAB The user can easily change the individual channel size and choose different position and layout on the single monitor with the Control Software via Ethernet or RS232 to set the desired layout configuration.
Scalable Rotation (90? & -90?) & ndash;KEY_TAB The user can easily Rotate/Scale only a single input/window image 90? left and right. This device can be configured with the Control Software, IR Remote, Ethernet, RS232 or front panel buttons.
Cloud Control & ndash;This device can be controlled via a cloud control platform where multiple units can be managed simultaneously.
Avenview HDM2-SPLITPRO-T4K-V2 HDMI 2.0a 4K@60 Quad Multiviewer w/Rotation & Usb Video Capture Features:
4 HDMI 4K Inputs & 2 HDMI 4K Outputs (with one HDMI loop out up to 4K2K@60 (YUV 4:4:4) interlaced or progressive)
Output resolution support up to 4K@60 (3840x2160);
Output resolution support Full HD or to 4K@60 (3840x2160);
USB 3.0 FHD Video Capture, UVC 1.0
HDCP 1.4/2.2 compliant
Fast switching between input channels and combined multiple images on single UHD display;
Cropping the (4) four HDMI Input Channels;
Supports PIP, PAP and multi-windows layout configurations;
Single Input Rotation (90? left & right) functions;
Background picture & logo support
Resize, position, zoom & pan and blend output video
Fade-in- & -out, wipe and dissolve transitions in full screen mode
8 preset Hot keys with 4 Custom layouts and 4 Full screen layouts within the supplied control software;
4 Custom saved layout buttons via the IR Remote;
Input resolution support full range of video resolutions up to WUXGA@60 (RB) or full HD1080p;
Uncompressed 7.1ch digital over HDMI
RS 232 port for Service mode and firmware upgrade;
Supports RS 232, Ethernet, IR Remote and front panel buttons and remote control via cloud platform.
Factory Reset feature
Advanced Quad Screen Multiviewer with Front Panel and IR Control
The DVI-SPLITPRO-4X Quad Screen Video Processor with IR Remote Control is an advanced video processor for multimedia presentations. It is an ideal solution for applications where up to four video signals must be displayed on a single display. It supports up to 16 video inputs, of which four can be outputted simultaneously with the desired display layout through software control. The advanced video processor allows you to manipulate output images, wherever positions and whatever sizes you want for viewing two computers or two video signals or a combination. The embedded scalar converts signals from input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200). Dual outputs are provided in both analog (VGA) and digital (DVI) format, one is connected to remote display and the other is connected to on-site display for real time monitoring.•Support six most popular video formats: four VGA, four DVI/HDMI, four component, four S-Video and four composite inputs •Input resolution support from 640x480 to 1920x1200, interlaced or progressive. •DVI 1.0 & HDMI 1.2 •Support HDCP 1.1 •Dual outputs (DVI / VGA), 640x480 to 1920x1200. •Video background available. •Adjustable size & position through software. •Dynamic transition for video sizing and positioning •Titles, borders and colored backgrounds. •Resize, position, zoom & pan and blend output video. •Image parameters and layouts are automatically saved in flash memory and can be recalled for later use. •Several Image parameters and layouts can be saved in computers and can be loaded for later use. •Video parameters adjustable (brightness, contrast, color temperature, etc.). •User-selectable output settings, up to 1920x1200. •Use as a Video Splitter, a Video Converter and a Video Switcher. •Firmware upgradable for support of new features and technology enhancements. •Control through RS-232/RS-485 over Cat-5 and IR Remote Control •Can be cascaded to obtain more images using RS-485 control path •Control protocol available for customer proprietary design •1RU Size
Avenview FO-HDM-20-MM HDMI Fiber Optical Cable (20m/66ft) HDCP Compliant
DESCRIPTION Avenview HDM Extender, FO-HDM-10-MM Series with fiber optic cable system lets you extend HDTV signal from HDMI source to up to 20 meters (66 feet) at 1080p without signal degradation High Speed and long distance transmission by Optical fiber Fully compatible with HDMI 1.3 Supports 12 bit Deep Color Uses standard Type A HDMI receptacle DDC and CEC signal and 5V power line are transmitter by copper line HDCP Compliant SPECIFICATIONS
Wireless 5G 3D HDMI Transmitter and Receiver Set with 1080P
W-HDM5G-20M, wireless extender set runs at 5GHz operation frequency to deliver uncompressed HD video/audio 20 meters in open field. This device make wireless connection by using WHDI Technology from HD media Source Devices such as HD Disc player, PC, Game Console, Set-to –Box to any display Device for example LCD Plasma or LED TV and projector while keeping wire –equivalent quality and no latency. It is ideal when your media player is located in your media room or living room, while you want to view content elsewhere such as your boardroom, office or kitchen on your HD Monitors. Furthermore you can operate the remote control within that room via IR through this device to the main unit.
Avenview FO-HDM4K-40-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/40m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
Display Port Fiber Optic Cable - 30M (100Ft)
Avenview FO-DP-30-MM Series with fiber optic cable system lets you extend DisplayPort digital signal up to 30 meters (100 feet) at WQXGA (2560x1600) resolution.Examples include: •Video wall System •Large LED Sign Board •Medical Imaging Equipment •Airplane On-board Video System •Home Theater •TV Broadcast Station •Auditorium •Conference Room Video Equipment
Power Adapter for Avenview Products -US Plug
5V2A AC Adapter with Interlocking Screw Connector-US
9 Port Dual Image Cascadable Videowall
The Avenview DVI-VIDEOWALL-9X, 9-Display Video Wall Processor (Video Wall Controller) is a powerful, most cost effective, and fully real time data/video processor for multiple flat panel displays or projectors. Thru DVI transmission, the quality of the outcome videos is guaranteed. The output display is grained up to 255 by 255 squares. Virtually any setups for the display layout can be possible by the provided software. The DVI-VIDEOWALL-9X allows you to manipulate two input videos, wherever positions and whatever sizes you want for viewing. The embedded scalar converts signals from two of the input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200).
Avenview FO-HDM4K-15-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/15m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
DVI Mini Receiver over Single CAT5
The DVI-C5-M-R, DVI over Single CAT5 Receiver Mini extends your PC DVI transmission distance up to 25m (80ft) at 1024x768 and 15m (50 ft) at 1920x1200 resolutions. With DVI-C5-M-R, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e LAN cables to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system.The DVI-C5-M-R includes two units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on the RJ-45 connector will blink. The transmission distance between the sending (transmitter) and receiving units (receiver) can be up to 25m (80ft) at XGA (1024x768) and 15m (50ft). With compact size, DVI-C5-M-R is the most cost effective choice for bringing your impressive digital video to the remote display.
Avenview CF-HDM-VGA-2-MM HDMI Male to VGA Male Flat Cable (2m)
Avenview CF-HDM-VGA-2-MM HDMI Male to VGA Male Flat Cable (2m) condition: New Brand: AvenviewMPN: CF-HDM-VGA-2-MM
Remote Control for SW-HDM3D-C6-4X4E and SW-HDM3D-C6-8X8E
Remote Control for SW-HDM3D-C6-4X4E and SW-HDM3D-C6-8X8E
Avenview FO-HDM4K-200-EMIX-S 4K 60Hz/HDR HDMI Extender (Transmitter) Single SC Fiber Optic Cable OM4
This listing is for FO-HDM4K-200-EMIX-S only. Use description below as a general reference. Avenview FO-HDM4K-200-EMIX-SET Extender set over single SC optical fiber cable has been designed to extend 4K (4096x2160 @60Hz) video and multi-channel audio formats to any 4K compatible monitor up to 200m. Video Signals: 4K@60 Hz (4096x2160), 4k2k@60 (UHD 3840x2160) , 3D and full HD 1080p@60 Hz. The FO-HDM4K-200-EMIX-SET includes two (2) units: Sender unit (TX) FO-HDM4K-200-EMIX-S and Receiver unit (RX) FO-HDM4K- 200-EMIX-R with one (1) FTP output port which allows the user to extend video and audio up to 200m (650ft). The FO-HDM4K-200-EMIX-SET input and output supports HBR2 cable assembly to handle upto 5.4Gbps/lane data rate (18 Gbps). New box type design which can be easily installed into any enviroment, behind the monitor and rack mounted on a rack shelf; this compact design gives the installer and user a complete solution with the new trends in rack mounted 4K sources streaming, network connected devices and new demand in Smart TV, ultra HD monitors and content. Features: Extends 4K HDMI signal up to 200 meters (650ft); Supports resolution up to 4K (4096X2160) @ 60Hz; Signal transmission through one SC terminated Multimode fiber optic (OM3); HDMI Ver.2.0 Compliant; HDCP Cpompliant; Real EDID transmission; CEC Compliant; Supports SCDC (Scrambling) function; Compact Design.
Avenview HBT2-C6BPOC-S 4K 60 HDMI HDR HDBaseT CAT5/6/7 Extender (Transmitter) with Bi-directional IR/RS-232/PoC
This listing is for HBT2-C6BPOC-S only. Use description below as a general reference. The Avenview HBT2C6BPOCSET HDMI HDBaseT CAT5/6/7 Extender SET is an upgraded unit from the HBTC6BPOCSET that can now extends high definition video, multichannel digital audio, data formats IR/RS232 and POC up to 100m (330ft) to any HD Monitor at 1080p or true 4K@60 resolutions.? Video Signals: 4K2K@60 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/48bit color depth. Audio signals: Uncompressed 7.1ch digital Data Signals: BiDirectional IR signals 30 KHz to 50 KHz and RS232 over CAT5/6. The HBT2C6BPOCSET includes two (2) units: Sending unit (TX) HBTC6BPOCS and Receiving unit (RX) HBTC6BPOCR with one (1) UTP output port which allows the user to extend video, audio and data signals up to 100m (330ft). The HBT2C6BPOCSET also allows bi directional IR control and RS232 connected to the TX unit, allowing the users to use any IR remote and third party RS232 control at the monitor side. Features Input: HDMI with 3D & 4Kx2K, 1080p,HDCP and DVI compliant. Extend the transmission: Full HD 1080p up to 100m (330ft) from the HDMI source 48bit and 4K2K@60 up to 80m (264ft). Support PoC (Power over Cable) power either units from the TX or RX side with one power supply Supports HDCP & EDID Bypass. Supports CEC bypass. Audi Supported: 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTSHD Master Audio. Support full frequency IR signal from 20KHz to 60KHz . Bidirectional IR passthrough. 3D support: Follow by Display / TV’s EDID.
RS232 Transmitter over CAT5, Cascading Module for DVI-SPLITPRO-4X / DVI-SPLITPRO-4K
The C5-RS232-S, RS232 Transmitter over CAT5, Cascading Module for DVI-SPILTPRO-4X / DVI-SPILTPRO-4K C5-RS232-S offers the ability of cascading; the remote units can be cascaded up to 32 devices.
Avenview HDM-XTRM-IPSET H.264 IP Capture to HDMI Encoder/Decoder with TELNET and Audio Support Kit
The Avenview HDM-XTRM-IP-SET, HDMI H.264 IP Matrix Decoder/Encoder delivers end- to-end streaming media over IP networks. The HDM-XTRM-IP-SET is a total architecture based on the TCP/IP protocol family. This device is engineered to deliver A/V signal over WAN, video extension over WAN with the help of matching network equipments can be achieved over several thousands of km's. Features: H.264 video decoder; Transmits audio and video from ethernet port to HDMI; Streams media through LAN or WAN; Input Resolutions: From 640x480@60Hz to 1080p@24/25/30/50/60Hz; Can be used using the Encoder only with a compatible decoding software over IP; Receive TS data with unicast or multicast method; Supports RTSP protocol; Output Resolution: From 640x480@60Hz to 1080p@24/25/30/50/60Hz; Supports audio format including LPCM or AAC standard; Displays can be controlled using RS-232 or CEC; Telnet CLI and Web UI supported; Supports static IP, DHCP and AutoIP; Video Bitrate: 2m~30Mbps; AAC Audio Bitrate: 32~240Kbps; LPCM Audio Bitrate: 1.6Mbps; Supports video timing up to 1920x1080@60Hz and 1920x1200@60Hz; Low Latency Mode: 120ms end-to-end latency.
VGA & Audio Extender Set with EQ/Gain/RGB Delay Control over CAT5
With only one cost effective CAT-5e cable, the Avenview VGA-C5A-SET lets you extend VGA (WUXGA) to cover the distance up to 300m (1,000ft). The system consists of Transmitter (VGA-C5A-S) and Receiver (VGA-C5A-R). With built-in EQ and GAIN control, the transmission path can be adjusted to adapt the cable quality and video bandwidth. Furthermore, the VGA RGB delay control [de-skew] function provides the compensation among R, G, B signals due to long transmission or through normal LAN cable. Analog stereo audio signals can be sent along with high quality VGA signal over long distance LAN cable.Features:•Supports up to WUXGA (1920x1200@60) to 300m (1,000ft) •Supports Analog Stereo Audio and S/PDIF Digital Audio •Adjustable equalization and gain control on Receiver unit •De-skew compensation available for RGB delay control •Wall mounting case for better fixedness
Avenview FO-DVI-1080LC-SET DVI Extender over Fiber Solution w/3-Yr Warranty
Avenview FO-DVI-1080LC-SET DVI Extender over Fiber Solution is designed to let digital flat panel display extend over 500m (1650 feet) away from host based on DVI standard by optical transmission technology.
Its small package and pseudo DDC detect function and Self-EDID detect function to use standard LC fiber connector allow users to install and utilize the device conveniently.
Avenview FO-DVI-1080LC-SET DVI Extender over Fiber Solution Features:
Long distance transmission of digital graphic signal corresponding to T.M.D.S
over 500 meter(1,640ft) by multi-mode glass fiber
R, G, B, Clock signal is transmitted separately by multi-mode optical fiber
Pseudo-DDC detection function for EDID information
Self-detecting function for EDID information
Maximum resolution WUXGA
Optional external power supply for Transmitter (Automatic power switch is included.)
12 Port Dual Image Cascadable Videowall with Modular Video Cards
The DVI-VIDEOWALL-12X is a 12 port DVI/HDMI Compliant Dual-Image Video Wall Processor. This powerful device has real time data/video processor for multiple flat panel displays or projectors. With the most flexibility on the input side, the unit accepts 12 Modular cards to complete any project from 4ports to 12 ports. Having the capability of accepting DVI/HDMI,VGA CVBS, S-Video, and YPbPr and splits the input onto the connected 12 displays. The DVI-VIDEOWALL-12X can display up to 2 video inputs(Digital and Analog) from the front end video mixer with the supplied Y cable. Thru DVI transmission, the quality of the outcome videos is guaranteed. The output display is grained up to 255 by 255 squares. Virtually any setups for the display layout can be possible by the provided software. The embedded mixer is an advanced video processor for multimedia presentations. It supports up to four popular types of video inputs, of which two can be outputted simultaneously in Picture-In-Picture (PIP) or Picture-Aside-Picture (PAP) modes. The DVI-VIDEOWALL-12X allows you to manipulate input videos, wherever position and whatever sizes you want for viewing. The embedded scalar converts signals from input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200).
Avenview FO-HDM-IP4K-SET HDMI Extender (Transmitter/Receiver) Set up to 20 KM over Fiber Optic with IR Support
FO-HDM-IP4K-SET, HDMI extender set is designed to provide a long haul video signal transmission over fiber optic cable at furthest possible distances. Avenview's FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K or 1080p HDMI signal up to 20 kilometers. With this extender users overcome the length restrictions of standard HDMI cables with IR Support. Features The Sender and Receiver units can extend 20000 meters (20 km) over a Fiber Optic cord point to point; The Sender can be connected to a Gigabit switch to establish an Ip address therefore sending 1080p/4K video signals to multiple Receivers connected to the Gigabit switch and the HDMI displays. (network switch with fiber optic ports required); Multiple Senders can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p/4K video signals to Receivers connected to the Gigabit switch to show different sources on multiple displays;* Extends HDMI signal up to 20 km over fiber optic; HDCP Compliant; Supported resolutions:480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz Supports point to point transmission function which can be expanded to the multi-point to point transmission function. *Requires a managed Gigabit switch with VLAN/IGMP support to have a soultion with multiple sources (Transmitters). Standard Gigabit switch can only support one transmitter. - The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and to allow duplicate IP addresses across the VLAN domains
DVI to VGA Converter, HDCP Compliant
Avenview C-DVI-VGA converts digital graphics signal of your PC to analog VGA signal, so that the PC, notebook or console systems with DVI output can be connected to display devices such as LCD monitor, projector or TV with VGA only input easily and conveniently.
Power Adapter for Avenview Products -AU Plug
5V2A AC Adapter with Interlocking Screw Connector-AU
Display Port Fiber Optic Cable - 50M (165Ft)
Avenview FO-DP-50-MM Series with fiber optic cable system lets you extend DisplayPort digital signal up to 50 meters (165 feet) at WQXGA (2560x1600) resolution.Examples include: •Video wall System •Large LED Sign Board •Medical Imaging Equipment •Airplane On-board Video System •Home Theater •TV Broadcast Station •Auditorium •Conference Room Video Equipment
Avenview FO-HDM4K-10-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/10m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
1 X 2 HDMI Transceiver with Loop In / Out over Single CAT5
The Avenview HDMI Extender / Repeater Series over Single CAT5 Distribution provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI or DVI compliant displays almost anywhere.
Avenview FO-HDM-50-MM HDMI Fiber Optical Cable (50m/165ft) HDCP Compliant
DESCRIPTION Avenview HDM Extender, FO-HDM-10-MM Series with fiber optic cable system lets you extend HDTV signal from HDMI source to up to 50 meters (165 feet) at 1080p without signal degradation High Speed and long distance transmission by Optical fiber Fully compatible with HDMI 1.3 Supports 12 bit Deep Color Uses standard Type A HDMI receptacle DDC and CEC signal and 5V power line are transmitter by copper line HDCP Compliant SPECIFICATIONS
VGA & Audio Receiver with EQ/Gain/RGB Delay Control over CAT5
With only one cost effective CAT-5e cable, the Avenview VGA-C5A-R lets you extend VGA (WUXGA) to cover the distance up to 300m (1,000ft). . With built-in EQ and GAIN control, the transmission path can be adjusted to adapt the cable quality and video bandwidth. Furthermore, the VGA RGB delay control [de-skew] function provides the compensation among R, G, B signals due to long transmission or through normal LAN cable.Features:•Supports up to WUXGA (1920x1200@60) to 300m (1,000ft) •Supports Analog Stereo Audio and S/PDIF Digital Audio •Adjustable equalization and gain control on Receiver unit •De-skew compensation available for RGB delay control •Wall mounting case for better fixedness
Avenview HBT2-C6BPOC-SET HDMI HDBaseT CAT5/6/7 Extender (Transmitter/Receiver)Set with IR/RS-232/PoC
The Avenview HBT2-C6BPOC-SET HDMI HDBaseT CAT5/6/7 Extender SET is an upgraded unit from the HBT-C6BPOC-SET that can now extends high definition video, multi-channel digital audio, data formats IR/RS232 and POC up to 100m (330ft) to any HD Monitor at 1080p or true 4K@60 resolutions. Video Signals: 4K2K@30 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/48-bit color depth. Audio signals: Uncompressed 7.1ch digital Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz and RS-232 over CAT5/6. The HBT2-C6BPOC-SET includes two (2) units: Sending unit (TX) HBT-C6BPOC-S and Receiving unit (RX) HBT-C6BPOC-R with one (1) UTP output port which allows the user to extend video, audio and data signals up to 100m (330ft). The HBT2-C6BPOC-SET also allows bi- directional IR control and RS-232 connected to the TX unit, allowing the users to use any IR remote and third party RS-232 control at the monitor side . The HBT2-C6BPOC-SET offers the most convenient solution for extending an application over long distances with A/V transmission @10G. Features Input: HDMI with 3D & 4Kx2K, 1080p,HDCP and DVI compliant. Extend the transmission: Full HD 1080p up to 100m (330ft) from the HDMI source 48-bit and 4K2K@60 up to 80m (264ft). Support PoC (Power over Cable) power either units from the TX or RX side with one power supply Supports HDCP & EDID Bypass. Supports CEC bypass. Audi Supported: 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. Support full frequency IR signal from 20KHz to 60KHz . Bi-directional IR pass-through. 3D support: Follow by Display / TV?s EDID. Full Duplex RS-232 control up to 115,200 bps. Wall mounting bracket included. NOTICE: 1. All HDMI over CATx transmission distances are measured using Belden CAT6A (625MHz), 4-Pair,UTP-Unshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H spline, Ripcord, PVC Jacket using Quantum 980 signal HDMI Video Generator Module with Video Pattern Testing and shielded ends. 2. The transmission length is largely affected by the type of category cables, also the type of HDMI sources, and the type of HDMI display. The testing result shows solid UTP cables (usually in the form of 300m or 1000ft bulk cable) can transmit a lot longer signals than stranded UTP cables (usually in the form of patch cords). Shielded STP connectors are better suit than unshielded UTP connectors. A solid UTP CAT6A cable shows longer transmission length than solid UTP CAT5E/6E cable. 3. EIA/TIA-568-B termination (T568B) for category cables is recommended. 4. To reduce the interference among the unshielded twisted pairs of wires in category cable, you can useshielded STP cables with shielded connector to improve EMI problems, which occurs in poor wiring environments with unplanned cable runs situated away from EMI interference. 5. Because the quality of the category cables has the major effects in how long transmission distance will be made and how good is the received signal on the display, the actual transmission length is subject to high quality category cables. For resolution greater than 1080i or 1280x1024, a solid CAT6E 250MHz cable is the only viable choice.
HDMI over Fiber Optic Extender up to 1000M - SC and EMI Shielded Unit
Avenview FO-HDMI-1000M-EMI optical HDMI extension module over 1SC Type Fiber Optic Cable, is designed to let digital flat panel display extend over 1000 meters away from host based on HDMI standard by optical transmission technology. Its small package and transmit up to four video and one low-speed lane, while simultaneously receiving one low-speed signal, all on one multimode fiber.
Avenview Matrix Switches
4X4 HDMI Matrix Switch over Single CAT5/6 with 3D, Ethernet, RS232,IR Pass-Through with 4 Receivers
Dual Link DVI Extender over 7 LC Cable HDCP Compliant
Avenview FO-DVI-DL-330 Series with fiber optic cable system lets you extend dual link digital signal of 2560x1600 up to 100m (330 feet).
Avenview FO-HDM4K-20-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/20m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
SDI Quad Screen Multiviewer with SDI Loop Out, 3GHD/SD-SDI
The SDI-SPLITPRO-4S Advanced 3G/HD/SD-SDI Quad-view Video Processor is an advanced video processor for multimedia presentations and ideal for surveillance applications. This unit is an ideal solution for applications where four video signals must be displayed on a single display. It supports up to 4 SDI video inputs, which can be outputted simultaneously with the desired display layout through software control. The advanced video processor allows you to manipulate the output images to various sizes and multiple positions on the desired display. This unit can controlled with the ease of the RS232 via a cable or control system, this functionality allow the user to easily set the desired outputs by 5 preset layouts or 8 custom layouts saved by the user. The embedded scalar converts signals from input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200). Dual outputs are provided in both digital (SDI) and digital (DVI) or (DVI/HDMI) format, one is connected to remote display and the other is connected to on-site display for real time monitoring.
Avenview HDM-C6IP-SET Unlimited LAN Extender Over Single CAT6 w/3-Yr Warranty
HDM-C6IP-SET, HDMI extender set is designed to extend your HD display with the resolutions of 1080p/60Hz up to 328 feet (100 meters) away from your HDMI or DVI-D source.. Thanks to the use of the TCP/IP protocol, you can transfer your high-definition video over an existing TCP/IP network. See below three examples:
A :- The Tx and Rx units can extend 100 meters over a single CAT5/6 cable connection point to point.
B:- The Tx can be connected to a switch to establish a IP address therefore sending 1080p video signals to Multiple Rx connected to the switch to the desired displays. BONUS up to 150 Displays with single Tx.
C:- Multiple Tx can be connected to a Managed Switch with IGMP/VLAN creating a STATIC address therefore sending different 1080p video signals to more than one Rx connected to the Managed Switch with IGMP/VLAN to the desired displays. Thus establishing a Matrix Function.
Avenview HDM-C6IP-SET Unlimited LAN Extender Over Single CAT6 Features:
Silicon Image chipset embedded for best quality, compatibility and reliability
HDMI compliant
HDCP compliant
EDID
Regenerates the HDMI signal
Extends HDMI up to 100m/120m over single CAT5E/6
Supports resolution HDTV / 1080Pp/60Hz, Vesa (1920 x 1080)
Supporting the point to point transmission function currently which can be expanded to the multi-point to point transmission function.
Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
Allows upto 150 Receivers to single Transmitter
HDMI Fiber Optic Cable - 100M (330Ft) HDCP Compliant
Avenview HDMI Extender, FO-HDMI-100-MM Series with fiber optic cable system lets you extend HDTV signal from HDMI source to up to 100 meters (330 feet) at 1080p without signal degradation.
Avenview FO-HDM4K-25-MM 4K HDMI 2.0 Extender (Transmitter/Receiver)Set over Fiber Optic Cable/25m
Avenview?s?FO-HDM4K-XX-MM?4K series fiber optic cable extends HDMI 2.0 digital signals up to 40 meters (130 feet) and supports up to 4K@60Hz (4096x2160) resolution. The fiber optic cable structure allows this 4K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 40 meters (130 feet). The?FO-HDM4K-XX-MM?4K series extender comes with a transmitter and a receiver. The transmitter is connected to a 4K source via HDMI connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 4K display via HDMI. The?FO-HDM4K-XX-MM?4K will auto detect the display resolution and will adjust the output accordingly. The?FO-HDM4K-XX-MM?4K HDMI fiber optic extender supports?HDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR) fiber optic cable assembly supports a data transfer rate up to 18.0Gbps. The?FO-HDM4K-XX-MM?4K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound. Features High Speed and long distance transmission by Optical fiber; Compatible with hdmi 2.0; HBR (High Bit Rate) Cable Assembly (up to 5.4 Gbs Data Rate/Line); Supports up to 4K@60Hz (4096x2160) resolution; Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber HDCP compliant; MMF optical fiber /copper hybrid cable structure. Consistent external power supply.
DVI-D Fiber Optical Cable - 15M (49Ft) HDCP Compliant
The DVI-D Fiber Optical Extension Cable locates a single link digital DVI display up to 15 meters (49 feet) from a computer with no loss of signal - delivering crystal clear digital images instantly. The cables are an integrated DVI-D cable solution, which includes the fiber optics components and the DDC signals built into the cable and the DVI connectors. The DVI-D Fiber Optical Cables are the ideal solution for a wide range of applications. Examples include:•Video wall System•Large LED Sign Board•Medical Imaging Equipment•Airplane On-board Video System•Home Theater•TV Broadcast Station•Auditorium•Conference Room Video Equipment
Avenview HDM-C6IP-S HDMI UNLIMITED LAN Extender (Transmitter) Over Single CAT6
This listing is for HDM-C6IP-S Transmitter only. Use description below as a general reference. HDM-C6IP-SET, HDMI extender set is designed to extend your HD display with the resolutions of 1080p/60Hz up to 330 feet (100 meters) away from your HDMI or DVI-D source.. Thanks to the use of the TCP/IP protocol, you can transfer your high-definition video over an existing TCP/IP network. See below three examples: A :- The Tx and Rx units can extend 100 meters over a single CAT5/6 cable connection point to point. B:- The Tx can be connected to a router to establish a IP address therefore sending 1080p video signals to Multiple Rx connected to the router to the desired displays. BONUS up to 150 Displays with single Tx. C:- The Tx can be connected to a router with internet to establish a DHCP address therefore sending 1080p video signals to Rx connected to the router to the desired displays. FEATURES Silicon Image chipset embedded for best quality, compatibility and reliability HDMI 1.3c compliant HDCP compliant EDID 1.1 Regenerates the HDMI signal Extends HDMI up to 100m/120m over single CAT5E/6 Supports resolution HDTV / 1080Pp/60Hz, Vesa (1920 x 1080) Supporting the point to point transmission function currently which can be expanded to the multi-point to point transmission function. Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission Allows upto 150 Receivers to single Transmitter
HDMI 3D Receiver over CAT5/6 with IR Control for 4X4 and 8X8 HDMI Matrix Switch
The Avenview HDM3D-C6SW-R, HDMI 1.3 Matrix Switch Receiver over CAT6 with 3D and IR Pass-through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at the same time.HDM3D-C6SW-R can be used with SW-HDM3D-C6-8X8 or SW-HDM3D-C6-4X4 Matrix Switch Series over CAT6.Through low cost Cat-6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly.
Avenview FO8K-DP-40-MM 40 M (132 Ft) 8K@60Hz HBR3 DisplayPort Cable w/3-Yr Warranty
Avenview FO8K-DP-40-MM 40 M (132 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 cable over Fiber Optic 8K Series fiber optic, active optical cable (AOC) lets you extend DisplayPort 1.2a and 1.4 digital signal up to 100 meters (328 feet) at 8K@60Hz (7680X4320) resolution. The fiber optic cable structure allows this 8K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 100 meters (328 feet).
TheKEY_TAB FO8K-DP-40-MM 8KKEY_TAB 8K series extender is comprised of a transmitting end and a reveiving end. The transmitter is connected to a 8K source via DisplayPort connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 8K display via DisplayPort. TheKEY_TAB FO8K-DP-40-MM 8KKEY_TAB 8K will auto detect the display resolution and will adjust the output accordingly.
TheKEY_TAB FO8K-DP-40-MM 8KKEY_TAB 8K DisplayPort fiber optic extender supports DPCP (Display-Port Content Protection) andHDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR3) fiber optic cable assembly supports a data transfer rate up to 8.1Gbs.
TheKEY_TAB FO8K-DP-40-MM 8KKEY_TAB 8K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound.
Avenview FO8K-DP-40-MM 40 M (132 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 cable over Fiber Optic Features:
High Speed and long distance transmission by Optical fiber;
Compatible with Displayport standard v1.2a and 1.4;
HBR3 (High Bit Rate) Cable Assembly (up to 8.1 Gbs Data Rate);
Supports up to 8K@60Hz (7680X4320) resolution;
Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber - DPCP & HDCP compliant( HDCP are not part of the Displayport standard);
MMF optical fiber /copper hybrid cable structure
HDMI 3D Receiver over CAT5 for 4X4 and 8X8 HDMI Matrix Switch
The Avenview HDM3D-C5SW-R, HDMI 1.3 Matrix Switch Receiver over CAT5 with 3D and IR Pass-through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at the same time. HDM3D-C5SW-R can be used with SW-HDM3D-C5-8X8 or SW-HDM3D-C5-4X4 Matrix Switch Series over CAT5 / CAT6. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly.
Avenview SW-HDM2-T4K-4X1 4x1 HDMI 4K UHD Matrix with 6G/Auto Detect Capability
Avenview 4x1 HDMI 4K@60 Switcher allows the transmission of video and multi-channel digital audio at 4K resolution. It allows the transmission of 18Gbps HDMI signal from any of its four HDMI 2.0 source inputs to one HDMI 2.0 with HDCP 2.2 support connected display. With supports 4K2K@60, 48-bit Deep Color, HDR (High Dynamic Range) audio and other features defined by HDMI 2.0 specifications. This device can be operated and controlled easily through front panel buttons, IR remote control, RS-232, Telnet or Web GUI controls. Video Signals: 4K@60/UHD (Ultra HD) and Full HD 1080p@60 Hz/48-bit color depth. Audio signals: PCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz Features: HDMI 2.0 (with HDR and 4K@60/UHD supported) and HDCP 2.2 compliant; Select any one of four HDMI 2.0 sources and display on a HDTV display with fast switching between sources; Supports HD resolutions up to UHD (3840x2160@24/25/30/50/60 & 4K (4096x2160 @24/25/30/50/60Hz) Supports HDR (10 bit 4:2:0) Supports HDMI 2.0 data rate from 18Gbps and 'Deep Color' up to 1080p/48-bit Supports selection of Standard (Fixed) or TV (Downstream) EDID settings Supports Audio pass-through of High-definition Audio formats PCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio Supports IR Remote,Telnet,WebGUI control and RS-232
Avenview FO8K-DP-20-MM 20 M (66 Ft) 8K@60Hz HBR3 DisplayPort 1.4 Cable w/3-Yr Warranty
Avenview FO8K-DP-20-MM 20 M (66 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 cable over Fiber Optic 8K Series fiber optic, active optical cable (AOC) lets you extend DisplayPort 1.2a and 1.4 digital signal up to 100 meters (328 feet) at 8K@60Hz (7680X4320) resolution. The fiber optic cable structure allows this 8K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 100 meters (328 feet).
TheKEY_TAB FO8K-DP-20-MM 8KKEY_TAB 8K series extender is comprised of a transmitting end and a reveiving end. The transmitter is connected to a 8K source via DisplayPort connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 8K display via DisplayPort. TheKEY_TAB FO8K-DP-20-MM 8KKEY_TAB 8K will auto detect the display resolution and will adjust the output accordingly.
TheKEY_TAB FO8K-DP-20-MM 8KKEY_TAB 8K DisplayPort fiber optic extender supports DPCP (Display-Port Content Protection) andHDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR3) fiber optic cable assembly supports a data transfer rate up to 8.1Gbs.
TheKEY_TAB FO8K-DP-20-MM 8KKEY_TAB 8K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound.
Avenview FO8K-DP-20-MM 20 M (66 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 cable over Fiber Optic Features:
High Speed and long distance transmission by Optical fiber;
Compatible with Displayport standard v1.2a and 1.4;
HBR3 (High Bit Rate) Cable Assembly (up to 8.1 Gbs Data Rate);
Supports up to 8K@60Hz (7680X4320) resolution;
Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber - DPCP & HDCP compliant( HDCP are not part of the Displayport standard);
MMF optical fiber /copper hybrid cable structure
Avenview Matrix Switches
8X8 HDMI Matrix Switch over Dual Cat5 with 3D, RS232, IR Pass-Through with 8 Receivers
Power Adapter for Avenview Products -UK Plug
5V2A AC Adapter with Interlocking Screw Connector-UK
Avenview FO-HDM-IP4K-S 4K@30Hz/HDMI IP Encoder with IR Support
This listing is for FO-HDM-IP4K-S only. Use description below as a general reference. FO-HDM-IP4K-SET, HDMI extender set is designed to provide a long haul video signal transmission over fiber optic cable at furthest possible distances. Avenview's FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K or 1080p HDMI signal up to 20 kilometers. With this extender users overcome the length restrictions of standard HDMI cables with IR Support. Features: The Sender and Receiver units can extend 20000 meters (20 km) over a Fiber Optic cord point to point; The Sender can be connected to a Gigabit switch to establish an Ip address therefore sending 1080p/4K video signals to multiple Receivers connected to the Gigabit switch and the HDMI displays. (network switch with fiber optic ports required); Multiple Senders can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p/4K video signals to Receivers connected to the Gigabit switch to show different sources on multiple displays;* Extends HDMI signal up to 20 km over fiber optic; HDCP Compliant; Supported resolutions: 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz, 1080i@50/60Hz,1080p@50/60Hz 4Kx2K@25/30Hz,4Kx2K@25/30Hz Supports point to point transmission function which can be expanded to the multi-point to point transmission function. Number of Senders and Receivers that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch 10/1000).Built-in electromagnetic interference prevention in environment for long distance transmission.
Avenview SPLIT-HDM2-T4K-8 1x8 HDMI True 4-60Hz Splitter w AUTO EDID/Management
This listing is for SPLIT-HDM2-T4K-8 Splitter only. Use description below as a general reference. The Avenview SPLIT-HDM2-T4K-2/4/8 (2, 4 or 8 Ports) HDMI Splitter can support the new industry of video signals 4K@60 and UHD. This device allows the INpuT (source as 4K GPU graphic card or UHD Digital Player) to be duplicated onto 4 4K@60 or UHD displays. Supporting both video and audio signal simultaneously reproducing the same quality via HDMI cable with EDID management. Video Signals: 4K@60 HDR(4:2:0 10bits) / (4:4:4 8bits), 4K@30, UHD, 3D, Deep Color, and 1080p 24-bit color depth. Audio Signals: DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM. The SPLIT-HDM2-T4K includes one unit: 2, 4 or 8 ports SPLITTER with one (1) HDMI Input that can extend up to 5m (16ft) and four (4) output ports (available in 2 and 8 outputs) which allows the user to extend over HDMI cable video and audio up to 5m (16ft). Features INPUT: HDMI 2.0 /DVI 1.0 support INPUT 4K@60 HDR(4:2:0 10bits) / (4:4:4 8bits), 4K@30, UHD, 3D, Deep Color, and 1080p 24-bit color depth; HDCP 2.2 Compliance; COLOR SPACE: xvYCC, x.v.Color & Deep Color; VIDEO RESOLUTIONS: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz/3D, 1080i@50/60Hz,1080p @ 24Hz /50/60Hz/3D, ULTRA HD (3840x2160)@24/30/60Hz 4K (4096x2160)@24/30/60Hz PC RESOLUTIONS: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x720@60Hz, 1280x768@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1600x900@60Hz,1680x1050@60Hz, 1920x1080@60Hz 1920x1200@60Hz ULTRA HD (3840x2160)@24/30/60Hz 4K (4096x2160)@24/30/60Hz FREQUENCY RANGE: 25MHz~600MHz LINK TRANSMISSION: up to 18Gbps (600MHz) DISTANCE: up to 5 meters (16ft) w 24AWG High Speed Ethernet HDMI Cable EDID: Multi mode selection & EDID learning from Display FIRMWARE: Update by mini USB connector PLUG & PLAY
Avenview FO8K-DP-10-MM 10 M (33 Ft) 8K@60Hz HBR3 DisplayPort 1.4 Cable w/3-Yr Warranty
Avenview FO8K-DP-10-MM 10 M (33 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 Cable over Fiber Optic 8K Series fiber optic, active optical cable (AOC) lets you extend DisplayPort 1.2a and 1.4 digital signal up to 100 meters (328 feet) at 8K@60Hz (7680X4320) resolution. The fiber optic cable structure allows this 8K extender to transmit at high speed over long distance. It is available in multiple lengths, from 10 meters to 100 meters (328 feet).
TheKEY_TAB FO8K-DP-10-MM 8KKEY_TAB 8K series extender is comprised of a transmitting end and a reveiving end. The transmitter is connected to a 8K source via DisplayPort connector, and converts the audio/video signal to transmit it across the fiber optic cable. The receiver then decodes the data to the connected 8K display via DisplayPort. TheKEY_TAB FO8K-DP-10-MM 8KKEY_TAB 8K will auto detect the display resolution and will adjust the output accordingly.
TheKEY_TAB FO8K-DP-10-MM 8KKEY_TAB 8K DisplayPort fiber optic extender supports DPCP (Display-Port Content Protection) andHDCP (High-bandwidth Digital Content Protection). The High Bit Rate (HBR3) fiber optic cable assembly supports a data transfer rate up to 8.1Gbs.
TheKEY_TAB FO8K-DP-10-MM 8KKEY_TAB 8K series fiber optic cable extender has a hot plug detection signal that is transmitted by a 1CH multi-mode fiber. This fiber optic cable extender is perfect for extending video and audio from your PC to a display over a long distance while still being able to maintain a clear image and sound.
Avenview FO8K-DP-10-MM 10 M (33 Ft) 8K@60Hz 4:4:4 HBR3 DisplayPort 1.4 Cable over Fiber Optic Features:
High Speed and long distance transmission by Optical fiber;
Compatible with Displayport standard v1.2a and 1.4;
HBR3 (High Bit Rate) Cable Assembly (up to 8.1 Gbs Data Rate);
Supports up to 8K@60Hz (7680X4320) resolution;
Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1CH multi-mode fiber - DPCP & HDCP compliant( HDCP are not part of the Displayport standard);
MMF optical fiber /copper hybrid cable structure
