close

Buy Art Proaudio Products online in United States

Sort by
ART USB Phono Plus
Easily transfer music from your record player to your laptop or computer. The USB Phono Plus from ART is the ideal solution for transferring your highly prized vinyl collection to your computer or laptop, and also works great as an audio interface between analog and digital sources. The built in low-noise RIAA phono pre-amp circuit features low cut filters (to remove rumble and noise) that will help achieve clean transfers. Front-mounted gain control and Signal/Clip LED allows easy optimization of a wide range of analog input sources. The USB Monitor/headphone provides zero latency monitoring of the input source for easy cueing. The USB Phono Plus can also act as audio playback source for any USB equipped computer or laptop. Optical TOSLINK input and output as well as an S/PDIF input make the USB Phono Plus an ideal analog / digital audio to USB interface as well. Housed in an all aluminum black anodized case, the USB Phono Plus can be powered by either external power supply or directly via USB port. To ensure maximum versatility, the USB Phono Plus is fully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with Windows 98SE/ME/2000/XP/Vista/7 USB audio device drivers as well as Apple OS9.1/OS-X computers with native USB support. Features Easily transfer audio from your vinyl records to your laptop or computer Also functions as an audio interface between analog and digital sources Front mounted gain control and Signal/Clip LED Dust those records off the shelf, and add them to your digital library today.
ART ProAudio
ART HeadTap Headphone Tap
The ART HeadTap Headphone Tap is a passive device with an input to connect the PA or monitor amplifier and an output to connect your headphones. Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors, or the drummer can't hear them well enough. Or perhaps it's a pickup gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it's preferable to just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. A volume control regulates the headphone output and internal resistors keep the unit's impedance high enough to protect the phones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system, or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers.
ART ProAudio
ART PB4x4PRO Power Distribution System
Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption. All PRO SERIES models have an additional internal discrete module called APFTM (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range. By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond. Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters.
ART ProAudio
ART PDB Passive Direct Box
The PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. The PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. PDB™ Applications: Electric guitar and bass pick up output signals - The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles. Keyboards and line level signals - The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard). DJ console output signals - DJ mixers often supply only an unbalanced -10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables. Speaker level signals - The PDB's ability to accept speaker level inputs from a power amplifier's output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.
ART ProAudio
ART USB Phono Plus Turntable Preamp
The ART USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and noise) guarantee pristine audio capture. Front mounted gain control and Signal/Clip LED allows easy optimization of a wide range of analog input sources. The USB Monitor/headphone provides zero latency monitoring of the input source for easy cueing. The USB PhonoPlusPS can also act as audio playback source for any USB equipped computer or laptop. Optical TOSLINK Input and Output as well as an S/PDIF Input make the USB PhonoPlusPS an ideal analog / digital audio to USB interface as well. The built-in low noise Phono Preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line Out jacks are always connected to the input preamp signal for source monitoring or to allow use as a stand-alone phono preamp. Housed in an all aluminum black anodized case, the USB PhonoPlusPS can be powered by either external power supply or directly via USB port. To ensure maximum versatility, the USB PhonoPlusPS is fully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with Windows 98SE/ME/2000/XP/Vista/7 USB audio device drivers as well as Apple OS 9.1 /OS-X computers with native USB support. USB PhonoPlusPS ships with SoundSaver Express software. Features: THD:. 01% Typical @ 1KHzHum and Noise: >90dB below clippingInput Impedance: 47k Ohms/100pF (phono) 270k Ohm (line) Maximum Input Level: 40mVrms @1KHz (phono), +19dBu (line) Maximum Gain: 45dB @ 1KHz (phono), +6dB (line) Analog Output Connections: RCA (preamp line output), 1/8" (USB monitor/headphone output)Maximum Output Level: +6dBu ( 1.4V rms)Filter Type/Response: Switchable, High Pass, -3dB @ 22HzA/D & D/A: 16 bit, 44.1KH z or 48KHz USB selectableDigital Audio Interface: TOSLINK in and out, S/PDIF coax (RCA) inComputer Interface: USB 1.1 compliant, Windows 98SE/ME/2000/XP or newer Mac OS 9.1 or newerPower Requirements: 7-12V DC or 9-12V AC @ 150mA, or USB buss poweredDimensions: 1.75" H x 4.2" W x 3.5" D ( 44.5 mm x 107mm x 89mm)Weight: 1.35 lbs. (. 61kg)Get your ART USB Phono Plus Turntable Preamp today at the guaranteed lowest price from Sam Ash with our 45-day return and 60-day price protection policy.
ART ProAudio
art ac adapter for usb phono plus
This AC Adapter from ART is a 12VDC power adapter designed for use with the USB Phono Plus preamplifier/audio interface. UPC NO: 609722757041 SKU: ADIB00J350G20
ART ProAudio
ART Tube MP Studio Mic Preamp
The original Tube MP made pro-caliber tube preamping available to ordinary musicians and home studios. The MP Studio goes a step further by adding a VU meter for better level control and ART's OPL (Output Protection Limiter), which controls and maintains the output peak signal to protect hard-disk recording systems and soundcards. The VU meter reflects the impact of the OPL circuitry when it is activated, which allows more effective fine tuning of the audio signal. It is a valuable tool for recording in project and home studios and can also function as a DI box with impedance matching and preamplification for line-level sources. Includes a 3-year warranty.
ART ProAudio
ART HeadAmp 4 Pro with Talk Back
The HeadAmp4Pro has five stereo headphone outs, each with its own volume control. A separate footswitchable XLR input (with phantom power) allows instant talkback to any one or all of the connected headphones. Input matrix allows the listener to audition any or all auxiliary inputs for maximum versatility. Although designed for home and project studio, the HeadAmp4Pro may easily be the ideal solution for teaching stations and conferencing communication networks.
ART ProAudio
ART SLA-2 Studio Power Amplifier
The ART SLA-2 Studio Power Amplifier is a Toroidal transformer-based amplifier that delivers 200W of clear power to reproduce your mixes with near-pinpoint accuracy. The ART SLA-2 has the advanced SmartFan cooling system; XLR, Euroblock and 1/4" inputs; XLR and 1/4" outputs, and a tamper-proof faceplate for fixed installations. The SLA-2 boosts 200W of stereo power or 560W of mono power (@ 8 ohms) and uses a single rackspace.
ART ProAudio
ART MacroMIX 4-Channel Personal Mixer
Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.
ART ProAudio
ART USB Phono Plus Project Series
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and noise) guarantee pristine audio capture.Front mounted gain control and Signal/Clip LED allows easy optimization of a wide range of analog input sources. The USB Monitor/headphone provides zero latency monitoring of the input source for easy cueing. The USB PhonoPlusPS can also act as audio playback source for any USB equipped computer or laptop. Optical TOSLINK Input and Output as well as an S/PDIF Input make the USB PhonoPlusPS an ideal analog / digital audio to USB interface as well.The built-in low noise Phono Preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line Out jacks are always connected to the input preamp signal for source monitoring or to allow use as a stand-alone phono preamp.USB Phono Plus Applications: Housed in an all aluminum black anodized case Powered by external power supply or directly via USB port Fully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. Works with Windows 98SE/ME/2000/XP/Vista/7 USB audio device drivers as well as Apple OS9.1/OS-X computers with native USB support. USB Phono Plus ships with Audacity
ART ProAudio
art mymonitorii personal headphone monitor/mixer
The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones.Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and 1/4-inch TRS outputs with plenty of drive for both
ART ProAudio
ART ARTcessories Zdirect Professional Passive Direct Box
The Zdirect Professional Passive Direct Box is a high-quality interface that lets you connect instrument, line, or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. The high-impedance, single-ended 1/4" input is converted by the transformer into an isolated balanced low-impedance signal output. Extremely flat and wide frequency response with high signal level handling. The ART Zdirect delivers clean and neutral sound with a wide variety of signal sources and over long signal runs in otherwise high-noise , live sound environments.
ART ProAudio
ART TPatch 8 Point Balanced Patch Bay
ART TPatch 8 Point Balanced Patch Bay The ARTcessories TPatch is a compact 8-point balanced patchbay that organizes your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4-inch TRS phone connectors user selectable normal and half-normal modes. The compact black-anodized all aluminum case and it's passive design allow the TPatch to provide years of trouble free service. Features: 8 Points of Balanced Direct Signals 4 Channels of Linked Input/Output Pairs Switchable Half Normal And Normal Modes of Operation (With Through Type Connections) ¼-inch TRS Phone Jack Connectors Rugged Extruded Aluminum Case
ART ProAudio
ART Phantom I 48V Phantom Microphone Power Supply
Input Connector: XLR female Output Connector: XLR Male Frequency Response: 10 Hz to 25 kHz Output Noise: -115 dB Current Drain: 14 mA Different condenser microphones specify different amounts of required phantom power. As a rule, these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.
ART ProAudio
ART MX821S 8-Channel Personal Mixer Stereo
The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4-inch TS line-level signal and provides independent level and pan controls.+48 Volt phantom power may be independently selected on each microphone input. A master level control adjusts the signal output to the low-impedance balanced 1/4-inch TRS jacks.Prefade output (not affected by the master level control) and Aux Bus input RCA jacks allow patching of multiple units when more channels are neededThe ART MX821S may be used on stage, in the studio, or for permanent install applications including conference rooms, corporate boardrooms, churches, restaurants, small clubs, health clubs and more. A built-in power supply and single high 19-inch rack mount format allows for easy installation and reliable long-term operation.
ART ProAudio
Art Dualxdirect Dual Professional Active Direct Box
The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.The input Attenuator switches allow for a wide range of signal levels and the input Thru jacks allow for tapping off of your signal chain. The Ground Lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.The DUALXDirect's active circuitry is powered by phantom voltage from the output connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The Power On/Off switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.
ART ProAudio
ART TConnect USB Instrument Interface with Built-in A/D Converter
The ART TConnect USB Guitar Cable provides an easy way to directly connect any electric guitar (or other electrified musical instrument with a mono phone jack) to your computer s USB port for convenient recording without any extra equipment. The output of the TConnect is a studio quality 16-bit, 44.1 kHz or 48 kHz digital audio signal. No special drivers are required, just plug and play with your Windows PC or Mac.Simply plug the 1/4" TS plug into your guitar and the USB connector into your computer. That s all there is to it. The first time you connect your TConnect to your computer, all the necessary drivers will be automatically installed and the cable will then be ready to use. The TConnect may be used with any recording software that supports USB audio devices.
ART ProAudio
ART TPS II 2-channel Tube Preamplifier System
ART TPS II 2-channel Tube Preamplifier System The ART TPS II is a 2-Channel Microphone/Instrument Preamp with Variable Valve Voicing, Variable Impedance, and Output Limiting. It features ART's Variable Valve Voicing, with optimized reference points to record guitars, basses, percussion, vocals, and more. It also features variable input impedance to let you match any mic from large condensers to ribbons. The TPS II (Tube Preamp System 2) is a 2-channel high performance preamp that's as versatile as it is affordable. It makes a great addition to any project or professional studio. The flexible TPS II features ART's proprietary V3 (Variable Valve Voicing) technology, and it also provides variable input impedance, which lets you dial in and match any mic type from large condensers to ribbons. The TPSII's legendary tube stage maintains the classic warm sound and adds additional tube voicing specifically tailored to vocal, guitar, bass, and acoustic instruments, making the TPS II an incredible DI box. ART's OPL (Output Protection Limiting) feature is also included to control overshoots and normalize levels before clipping occurs. Features: Tube preamp with classic warm sound Variable Valve Voicing lets you dial in amount of tube character Variable input impedance to tune in to your microphone hi-Z instrument input for DI use Output Protection Limiting controls overshoots and normalizes levels without clipping
ART ProAudio
ART Dual RDB 2-channel Passive Re-Amping Device
The Dual RDB has two high quality isolation transformers that prevent ground loops when connecting various systems together. The Dual RDB accepts 1/4" TRS and XLR line level inputs and outputs mic or instrument levels. The Dual RDB's variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source.
ART ProAudio
ART S8 8-Channel 2-Way Mic Microphone Splitter NEW
The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 Microphone Splitter provides one direct output and one transformer isolated output from a single microphone, making it the ideal signal splitting solution for dividing mic signals for separate Front-of-House monitor mixes, or for remote recording applications. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 mic splitter also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc.With such an extensive history of making audio processors, ART has consistently set new industry standards and watched competitors follow their innovation and the ART S8 Microphone Splitter is no exception. ART continues to set the bar for high-quality audio products at a reasonable cost to audio enthusiasts of all types.
ART ProAudio
ART HeadAmp6 6-Channel Rack mount Headphone Amplifier Amp NEW
ART Professional Six Channel Headphone Amplifier. Three outputs and aux in per channel - 1 Rack unit.
ART ProAudio
ART CoolSwitch - A/B-Y Switch Footswitch Selector Pedal w/ Parallel in/out Jacks
ART CoolSwitch - A/B-Y Switch Footswitch Selector Pedal w/ Parallel in/out Jacks
ART ProAudio
ART SPLITMix4 - 4-Channel 1/4" Stereo Input Passive Splitter / Mixer
The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.
ART ProAudio
ART CleanBOX II Audio System 2-Channel Hum Ground Loop Remover Eliminator
Welcome to the CleanBOX II from ART! "Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with ART's CleanBOX II.
ART ProAudio
ART EQ355 Dual 31-Band Rack mount Equalizer 2 Channel EQ-355 NEW
The ART 355 Dual Channel 31-Band EQ boasts a rugged, all-steel chassis that occupies 2U rackspace and fits standard 19" racks. The 335 has a long list of impressive features that includes constant Q circuitry, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, balanced XLR and 1/4" and unbalanced RCA input and output connections, adjustable high-pass and low-pass filters, variable input level controls, signal clip level indicators, ground lift switch, internal power supply, and selectable line voltage switch.
ART ProAudio
APPLIED RESEARCH TECHNOLOGY CX311 ACTIVE CROSSOVER W/ SUB OUTPUT2WAY STEREO 3WAY MONO
The 311 Crossover may be used as a stereo 2-way crossover network and has the addition of the subwoofer output for low-end frequency reinforcement. It employs 24dB / octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region. Each channel features independent high and low output level controls and a crossover frequency rotary control which covers a wide range (250hz to 6khz). All three outputs have a 30 cycle low cut switch to eliminate low-end rumble. The subwoofer features an independent output level and rotary control for frequencies in the 50hz to 250hz range.UPC:840402019183SKU:ADIB004S2Q5T6
ART ProAudio
Back to Top