Note: we will not supply battery, because only Rehmie standard shipping and DHL supports battery ; you can buy the battery CR2032 in local, it is very normal battery.
Based on the open-source RFID emulator ChameleonMini:
Big News: we decide to make the reboot open source, so, after you place order, will give you the link.
Note: the Built-in firmware is developed by our team. if you don't like the firmware, you can reflash the original firmware.
But you can not reflash the original firmware with USB directly, has to use MKII(AVR ISP MKII Programer or other Compatible tools）to reflash the firmware in PDI interface.
And after you reflash original firmware, can not flash back to my firmware, have to send it back to us.
The Piswords Redesign ChameleonMini is available for purchase as well.
The ChameleonMini is a versatile contactless smartcard emulator compliant to NFC, ISO 14443 and ISO 15693. It has been designed and maintained by the Chair for Embedded Security of the Ruhr-University in Bochum. The freely programmable platform can be used to emulate and virtualize cards (perfect clones including the UID), for practical penetration testing.
Witness the ChameleonMini in action emulating a Mifare 1K tag
Features of the ChameleonMini:
Pre-programmed and tested
Firmware support for ISO14443A Sniffing, Mifare Classic 1K and Mifare 4K emulation (4 and 7-byte UID(7-byte is only for original firmware ,my firmware does not support now.), and Mifare Ultralight emulation.
Hardware support for ASK and BPSK load modulation using a subcarrier to cover almost any card standard available
Expandability to other cards and standards using a modular firmware structure
Can be re-programmed over PDI using attached pinheaders or Atmel DFU mode
Can be controlled using a fully documented AT-like command set via CDC using the excellent LUFA USB stack
1 MByte of card memory allows for multiple card emulations to reside on the device simultaneously
Card emulations can be switched even without a USB connection by pressing the button on the ChameleonMini
Card contents can be easily uploaded and downloaded by means of the command line and X-MODEM using terminal interfacing software
; USB Cable---------1PCS