SMOKE LEAK LOCATOR ALL-300 EVAP
ATTENTION: If there is any destination tax/duties for the package, that is afforded by buyer. Thanks very much for your understanding!
1) This one is EVAP Model also applicable on EVAP system, but NOT suitable for Turbo system.
2) This one works with 12V cars (truck is supported by ALL-300 Heavy Duty only, if you need it, please contact me)
3) Turn off the ignition of the vehicle. (leak test of vehicle systems require the engine to be offf)
4) Connect power cords to 12V vehicle battery, for best performance, the vehicle battery shal be fully charged. Do not use a DC 12V switch power supply.
5) Please do not fill oil when the machine is working, otherwise the heater inside will be damaged.
Smoke Leak Locator All-300 ALL-300 is an innovative product that provide safe and convenient method to check leaks in automotive systems! It is so far the fastest way of detecting & locating the leak position of all pipe system in an vehicle at an affordable price.
How to refill oil?
1. This automotive diagnostic leak detector uses paraffin/baby oil as smoke juice
2. Fill 20ml smoke juice before the first time using.
3. only refill when the smoke production becomes weak
4. Drain the old oil before refilling, by turning the main unit upside-down to let the old oil come out from the oil refill port.
5. The refilling leve shall not exceed 15ml.
Please fill the Baby Oil of John-son & John-son brand (pink color), which is not included in the parcel. You'd better purchase it in your local market.
How to connect the smoke tube for ALL-300 Turbo
Smoke Leak Locator All-300 Four Reasons to get:
1. Time saving features
1). Help locate the leak position on all vehicle systems in 1 minute
2). Fast determine the leak size by read the flow meter
1). Easy to Operate
2). Fast in helping locate the leak
4). Dual Mode: Smoke Mode, Air Mode
5). Visual pressure minitoring
6). Visual flow control
7). Inbuild air compressor
8). 5L/Min Super flow rate
9). Visual monitoring of smoke fuel level
10). Bigger oil tank up to 200ml capacity
11). Best mate for automotive scanner
1).Unbeatable price / performance ratio
2).Designed for long time use
With inbuild air compressor, and power supplied by 12Volt vehicle battery, its the best tool for leak locating regardless of the working condition.
Smoke Leak Locator All-300 Highlights:
1. Significantly reduce the service time-cost
2. Ensure better service quality and discover potential service request
3. AL-300 is a handy new generation of automotive system leak locator
4. AL-300uses Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) ,a 30 ML refill will be enough for test
for 40 times( varies, depend on how long the user operate the equipment for each test.)
5. AL-300 is a one-time invest for a workshop or garage, but will help so much in work
All300 Smoke Automotive Leak Locator Features:
1. Simple To Operate
1). The Smoke Automotive Leak Locator is easily controlled with a nice keypress film and a flow control. with visual indication of the pressure level and
2). Stablized output pressure is perfect to perform leak test of all pipe system with no damage to the vehicle sealing.
3). Save time and fast leak detection. In most cases, a scan tool may find out pressure sensors abnormal etc., while actully the 'pressure low' problem is caused by leak somewhere.
4). Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.
5). Use Air Mode to fast determine if there's a leak. and use Smoke Mode to find out where the leak is.
6). Adjustable air flow to perform leak test on different system that requires different flow amount.
7). If the system doesn't leak, when reached the required pressure, the flow meter readings will drop to 0, otherwise, can determine the leaksize by the flow rate
The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts, Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more....
3. Visual monitor smoke fuel level
Fast to know the fuel level, don't have to guess if its time for fuel refill.
4. Inbuilt air compressor
Perform leak test with no need of an external air compressor for ALL-300 Turbo model
5. Various Fittings
For different application needs
All-300 Smoke Automotive Leak Locator Target customer:
Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.
ALL-300 Smoke Automotive Leak Locator Specifications:
1. Testing pressure: 0 - 16KPa
2. Dual Mode: Smoke Mode & Air Mode
3. Visual flow monitoring and control
4. Air flow control: 0-2.5L/min
5. Power supply : DC12V, 8A, 100W
6. Visual pressure monitoring and control
7. Visual monitoring of smoke fuel level
Leak Indication via Pressure Gauge
1pc * Main Unit
1pc * Plastic Casing
1pc * Power Cords
1pc * Smoke Tube
1pc * Intake Adaptor Cone
1pc * Cap Topper(set)
1pc * EVAP Valve Tool
1pc * EVAP Service Port Adaptor
2pcs * Screw
1pc * User Manual
This tool has no "Universal Intake Adapter",if you need it, please CLICK HERE>>> to order it.
If you need other optional parts, please feel free to contact me to check the price.
Comparison Between ALL-300 Series