Easy to Configure No programming knowledge is necessary to configure MLC 62 RS D MediaLink Controllers. When used with the supplied Windows®-based configuration software, installation files can be saved and used to duplicate additional MLC 62 models. The files can also be archived for later use. In addition, the MLC 62 RS D contains a mini USB port located behind the decorator-style wallplate. The wallplate can be easily removed to allow for easy configuration access without having to remove the installed controller.
Easy-to-use MLC 62 Series Configuration Program - Provides fast and simple setup via RS-232 or USB when combined with one of many ready-to-use IR or RS-232 device drivers available on the Extron Web site. The configuration program and MLC 62 RS D also support IR Learning for creating new IR drivers from the handheld remote of a source or display device.
Features Eight customizable backlit buttons — Standard buttons available for power on, power off, volume up, volume down, and source selection. A variety of pre-labeled buttons are included, allowing the controllers to be easily customized to suit the application. Backlit buttons provide ease of use in low-light environments. Unidirectional RS-232 and configurable IR ports for universal display control — The MLC 62 RS D has a dedicated port for communicating with virtually any projector or flat panel display via unidirectional RS-232 or IR control. Display control drivers can be downloaded from the Extron Web site and used to configure the controller. Two relays — Enables room control for lights and screens Digital input — Enables monitoring of a switch or sensor.