|Size (L x W x H cm)
||56.5cm x 19.1cm x 19.7cm
||Super fine Aluminium
|NAFDAC Reg. Number
(Baldwin Filter 300-W30) DAHL diesel fuel filter/water separator system eliminates water from the fuel before reaching the fuel pump and injectors. This prevents the major cause of diesel fuel injection system failure.
Because water and solid contaminants displace the diesel fuel’s lubricating coating on high precision injection components. The loss of this protection in your engine results in wear, erosion, surface pitting and eventual pressure loss, the DAHL the system has been designed to take care of those shortcomings in your engine system by eliminates nearly all of your engine problems caused by solid contaminants and virtually removes 100% of the water in diesel fuel.
Most existing fuel filters are designed to function in a single step, DAHL’s functional dual-chamber 3-stage (Baldwin Filter 300-W30) DAHL diesel fuel filter/water separator provide efficient suction side water separation and contaminant filtration. Most of the solid contaminants are separated by the patented depressurizer cone in the bowl before reaching the filter element which results in less frequent changes in the filter element.
This dependable diesel fuel filter/water separator has been engineered to meets and exceeds SAE J905 for life and Efficiency, SAE J1985 for Single-Pass Efficiency, SAE J1488 for Water Removal, ISO 19438 for Particle Removing Efficiency by Size and U.S. Coast Guard requirements for Marine Applications.
The filter element of the (Baldwin Filter 300-W30) DAHL diesel fuel filter/water separator either for marine, gen set, or mobile applications can last up to 40,000 Miles. And with these additional functions:
DAHL removes virtually 100% of the water and solid contaminants.
DAHL diesel fuel/water separators have been tested and proven over millions of miles and hours under all sorts of conditions.
DAHL eliminates nearly all of the engine problems caused by water and solid contaminants in diesel fuel. In addition to saving you the cost of expensive repair bills and aggravation, you can expect:
· Longer Injection System Component Life
· Full Power Performance
· Less Element Replacement Cost
You can be sure that each DAHL unit is designed right, built right and does its job right.
Note: The recommended flow rate of Model 300 is 180G/H (681.4L/H) and the maximum flow rate is 325G/H (1230.3L/H)