|What's in the box
||2 * Aluminum Shell (top & bottom) 1 * Plastic Middle Frame 1 * Circuit Board 1 * Solar Panel 1 * Led Panel 1 * Diffusion Panel 1 * Button 1 * Transparent Button 1 * Screws Pack(Other items in the pictures are not included.)
||No Local Warranty
NOTE: 1. This is a power bank kit (including circuit board and shell), not a finished product. You should buy 5 * 18650 batteries and install them by yourself. The cable is not included either.2. DO NOT support free soldering, you must have related knowledge and tools before assembling it.Description: This power bank case DIY Kit allows you to make your own power bank by yourself. Dual USB ports can connected with 2 devices simultaneously and supply power. This charger can intelligently identify and charge your device at high speed with safety protections ensuring safe charging. Equipped with solar panel, put the charger under sunshine and it will recharge the battery itself. And the flashlight function makes it a great helper in the dark. It will be your first choice for outdoor activities!Features: 1. Dual USB Ports: Charge two devices simultaneously. 2A USB port for iPad/Tablets, 1A USB ports for cellphones or other electronic devices. 2. Equipped with solar panel, which could recharge the battery itself under sunshine while outdoor. Or power the charger via Micro USB port. 3. 3-level brightness LED light: use it as a flashlight in the dark. 4. You can check the remaining battery power on the charger. 5. Over-charge, over-discharge, over-heat, over-power, over-voltage and short circuit protection, much safer charging.6. Stable Structure of Each Part: 8 screws (included) to lock the case tightly.Specifications: Color: Black, Silver, Blue, Gold, Rose Red (Optional) Material: Aluminum + Plastic Size: Approx. 124 * 79 * 21 mm / 4.9 * 3.1 * 0.8 inch Interface: 2 * USB Ports, 1 * Micro USB Port Micro USB Input: 5V 1A Dual USB Output: 5V 1A, 5V 2A Battery: 5 * 18650 (NOT included) Package Weight: About 100gPackage Included: 2 * Aluminum Shell (top & bottom) 1 * Plastic Middle Frame 1 * Circuit Board 1 * Solar Panel 1 * Led Panel 1 * Diffusion Panel 1 * Button 1 * Transparent Button1 * Screws Pack(Other items in the pictures are not included.)Manual:1. Connect the B+ (B-) on the mainboard to the battery positive (negative) pole.2. Connect s+ (s-) to + (-) on the solar panel.3. Connect LED+ (LED-) to + (-) on LED light panel.