|Size (L x W x H cm)
||12 x 3 x 10
|What's in the box
||1X 100A/60A/50A/40A 12V 24V MPPT Auto Solar Charge Controller With LCD Dual USB 50V Output Solar Cell Panel Regulator
Industrial-grade master chip, 16 grade AD sampling accuracy, temperature, charging current, discharge current accurate real-time display, power generation at a glance.
Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.
Large-screen LCD display, adjustable charging and discharging parameters.
UItra-wide charge and discharge adjustable, as long as you understand the characteristics of the battery set its corresponding charging parameters, you can charge a battery. When the output is off, the time can be adjusted, which is more convenient. (on the market, there is no point adjustment)
Acomplete three-phase charge management, effectively protect the battery, the battery is more durable.
Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection protection,when the fault is eliminated, the controller automatically recovers, does not damage the device.
Bidirectional MoS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
R5.0 solar charging DC plug, R5.0 DC lamp output DC plug, convenient connection.
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during nights.
5. Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
8. Thunder protection
9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)
10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Current: 40A, 50A, 60A, 100A
Max. PV voltage: 50V
Max. PV input power: 750W(12V) / 1500W(24V)
Shell material: ABS
Color: Black & blue
Quantity: 1 Set
Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 x Solar Panels Battery Charge Controller
1 x User Manual