Brand |
Tripp Lite |
Model |
PDUMH15AT |
Type |
Metered |
Rack Size |
1U |
Style |
Rackmount |
Front Panel LEDs |
8 front panel LEDs display power on / off status for each outlet, plus 2 additional LEDs to indicate input power status for primary and secondary inputs |
Certifications |
Tested to UL 60950-1 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant, TAA compliant |
ROHS |
Yes |
Input Voltage |
100; 120; 127V |
Maximum Input Current |
15A |
Input Connector(s) |
2 x NEMA 5-15P |
Cord Length |
12 ft |
Output Voltage |
100; 120; 127V |
Output Frequency |
60 Hz |
Output Connector(s) |
8 x 5-15R |
Operating Relative Humidity |
Up to 95% (non-condensing) |
Features |
120V 15A metered PDU system with Automatic Transfer Switch (ATS)
Dual input cords, one attached (primary) and one optional-use detachable cord (secondary)
Included cordsets support 5-15P plug-in connection
Front panel digital ammeter displays power consumption in amps
8 built-in NEMA 5-15R output receptacles
Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware (ATS function requires the use of a full time sine wave online UPS, like Tripp Lite's SmartOnline series)
ATS functionality is supported by any two 120V AC power sources, regardless of phase angle, to offer support for a variety of unique redundant power applications
Super-fast switchover between primary and secondary power sources occurs within 2-7 milliseconds
Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
SNMPWEBCARD can also be used as a configuration tool to custom program PDU power-on and power-off sequences with user-specified time delays in response to loss and restoration of primary input power
Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.50" |
Dimensions |
1.75" x 17.50" x 14.50" |
Weight |
11.00 lbs. |
Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R outlets, and two 12 ft. 5-15P input power cord