SMARTOOO SL-EX60 HDMI Extender over single Cat5e/6 up to 60m/196ft with IR return signal, HDMI loop out, EDID setting, cable length EQ setting and Power over cable (RX power over cable need no power)

SMARTOOO SL-EX60 HDMI Extender over Cat6 with IR extends HDMI video and audio signals and IR, at a distance of up to 60m/196ft over a single CAT6 cable. It is with HDMI loop out and IR return signal. Up to thousands of testing with different brands, models of TVs, sources in order to make sure the high compatibility.
Features: * Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable. * Support copy EDID from receiver display or loop out display * Allows for cascading via additional HDMI loop out port. * Support Power over cable function.
* Transmission Range: Extends 1080p resolution up to 60m/196ft over a single Cat5e or Cat6 cable. * Works with HDMI and HDCP compliant devices * Supports up to 1080p High Definition resolution. * Compact design for an easy and flexible installation.
Video Bandwidth: Single-link 165Mhz [ 4.95G bps]
Video Support: 480i/480p/720p/1080i/1080p@60HZ
Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
ESD Protection: Human
Body model: +/- 8 kV (air-gap discharge) +/- 4 kV (contact discharge)
HDMI connector: Type A 19 pin female
RJ-45 connector: WE/SS
8P8C 3.5 mm connector: (TX and RX)
IR Receiver/IR Blaster Housing: Metal enclosure
Power Supply: (1) 5V1A DC Package Contents HDMI Transmitter -------------------------------1pcs HDMI Receiver ------------------------------------1pcs 38khz IR Tx cable ---------------------------1pcs 38khz IR Rx cable ---------------------------1pcs 5V1A DC Power Supply Adaptor --------------1pcs English user Manual -----------------------------------1pcs.
Troubleshooting:
1. Cheap CAT5 cable is not recommended. Network cable please use pure-copper wire and shielded-twister pair;
2. There is setting of DIP switches for different length of cables. Please read the manual instuction;
3. This HDMI extender works with power supply from 5v~12v. If you devices are old or network cables are very long, and get abnormal pictures, please change a power supply of 12v in order to supply enough power; 4. IR return signal does not work with blu-tooth remote control; and the IR bandwidth is 38KHZ.