Pololu DRV8825 High Current Stepper Motor Driver Carrier

Key Features:

• Simple step and direction control interface
• Adjustable current control lets you set the maximum current output with a potentiometer
• Built-in regulator (no external logic voltage supply needed)
• Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
• Short-to-ground and shorted-load protection

This breakout board for TI’ s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

Item Specifics
1 - PCB
1 - 0.1" male header
Minimum operating voltage: 8.2 V
Maximum operating voltage: 45 V
Continuous current per phase without heatsink: 1.5 A
Maximum current per phase: 2.2 A
Minimum logic voltage: 2.5 V
Maximum logic voltage: 5.25 V
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Size: 0.6 ″ × 0.8
Weight: 1.6 g
Some soldering may be required