Brand |
PLANET |
Model |
IGS-620TF |
Format |
DIN Rail Kit and Wall Mount Ear |
Standards |
IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control |
Network Management Type |
Unmanaged |
Primary Ports |
4 x RJ45 + 2 x SFP |
Primary Port Speed |
10/100/1000Mbps |
MAC Address Table |
1K |
Switching Method |
Store and Forward |
Jumbo Frames |
9216 bytes |
LEDs |
3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for Per Copper Port (Port-1~Port-4):
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-5 and Port-6):
Green: LNK/ACT |
Power |
DC 12 - 48V or AC 24V
Redundant power with polarity reverses protection function
7.2watts / 24BTU |
Features |
Physical Port:
4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Fiber Port Redundancy:
Link status auto-detect and redundant on Dual ports with the same connector type
Only Primary-Port is active at a time, the Backup-Port is blocked
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port.
Layer 2 Features:
Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
9K Jumbo Frame Size support
Backplane (Switching Fabric): 12Gbps
Integrated address look-up engine, support 1K absolute MAC addresses
Automatic address learning and address aging
CSMA/CD Protocol
Industrial Case / Installation:
Slim IP30 metal case protection
DIN Rail and Wall Mount Design
Redundant Power Design:
12 to 48V DC, redundant power with polarity reverse protect function
AC 24V power adapter acceptable
Supports EFT protection 6000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature |
Dimensions |
1.26" x 5.31" x 3.43" |
Weight |
1.11 lbs. |
Temperature |
-40 - 75 degree Celsius |
Humidity |
5% - 95%, Non-condensing |