Hantek DSO4102C Desktop Mixed Signal Oscilloscope(MSO) 2CH Digital Storage Oscilloscope +1 Channel Arbitrary/Function Waveform Generator 100MHz 7

2 Channel Digital Oscilloscope. 1 Channel Arbitrary/Function Waveform Generator. The Keys for oscilloscope and waveform generatoris separated for convenient to operate it simultaneously.
Oscilloscope: 100MHz Bandwidth, 1GSa/s Sample Rate. 25MHz Arbitrarywaveform generator, 12 bits resolution, 200MHz DDS, 7 inch 64K color LCD display, Resolution 800x480.
Features: 2 channel digital oscilloscope + arbitrary/function waveform generator + synchronizing signal + external trigger. The keys for oscilloscope and waveform generator is separated for convenient to operate it simultaneously. Large and clear display (7 inch 64K color LCD display, Resolution 800x480), more clear and realistic waveform.
Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth, more than 20 kinds of auto measurement functions.
Powerful trigger function: edge, video, pulse, slope, over time, alternative.
Arbitrary/function waveform generator: 25MHz, 12 bits resolution, 200MHz DDS, arbitrary wave/square wave/sine wave/trianglewave/trapezoidal wave/pulse wave/DC is easy to simulate transducer. Integrated USB Host, Support USB disk storage, USB interface/SD card system update.
Note: Hantek DSO4102C Digital Oscilloscope is for 3 years Warranty! Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.
Specifications: Model DSO4102C Oscilloscope Sample Rate
Sampling Rate Range: 1GSa/s
Equivalent Sample Rate: 25GSa/s Acquisition Modes Normal Normal data only Peak Detect High-frequency and randon glith capture Average Wavefom Average, selectable 4, 8, 16, 32, 64, 128 Inputs Inputs Coupling AC, DC, GND Inpits Impendance 1MO2% ?20pF3pF Probe Attenuation 1X, 10X Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X Maximum Input Voltage CAT I and
CAT II: 300VRMS (10)
CAT III: 150VRMS (1); Installation
Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. Horizontal Sample Rate Range 1GS/s Waveform Interpolation (sin x) /x Record Length 40K SEC/DIV Range 4ns/div to 40s/div Sample Rate and 50ppm(at over any 1ms time interval) Delay Time Accuracy Position Range 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal
mode: (1 sample interval +100ppm reading + 0.6 ns); 16 averages: (1 sample interval + 100ppm reading + 0.4 ns); Sample interval = s/div 200 Vertical Vertical Resolution 8-bit resolution, all channel sampled simultaneously Position Range 2mV/div to 10V/div