Chipset: Intel 82575EB
Host Interface: PCI-EX
Interfaces/Ports: 2 x RJ-45 UTP-5
Transmission rate: 10/100/1000Mbps PCI Express x1, compatible with x4, x8, x16 Support PCI Express 1.0 a ( 2.5GH z)
Transmission distance: 10Base / 100Base-Tx / 1000Base-T Category 5E maximum distance of 100 meters
Certifications & Standards: IEEE 802.1 p, IEEE 802.1Q, IEEE 802.2, IEEE 802.3 ac, IEEE 802.3 az, IEEE 802.3 x, IEEE 802.3 z, IEEE 802.3 ad
Support os: Microsoft Windows * (32 & 64 bit), SCO Unix
Ware* 7. x, Open Unix* 8.0, Novell ODI*, Novell Netware*, SUSE Linux Enterprise Server* 9.0, Red Hat Enterprise Linux* 4.0, Linux*, Free
BSD*, Sun Solaris*, Microsoft DOS*, VMWare ESX* Support VMDq Support PCI-Express Base Specification, Rev. 1.1RD High-performance, reliable and low memory latency Intel 82575 gigabit ethernet controller, is a compact component with two fully integrated Gigabit Ethernet Media Access Control (MAC), physical layer (PHY) ports and Ser
Des interface EEPROM and FLASH, it can be also be used in EEPRO
Mless configurations Increased throughput and lower CPU utilization, avoid PCI-express in jam Hardware accelerate can partial load CUP tasks. Transmit and receive IP, TCP and UDP checksum off-loading Capabilities, Transmit TCP segmentation Reliable, useful Server levels and features
Link aggregation and load balancing: --decided
by switch: 802.3 ad (LACP), Generic Trunking (GEC/FEC) --independent of switch and NIC --Failover Support 802.1 p layer 2 priority encoding Support 802.1 q VLAN tagging Jumbo frame 9.5 kByte Support 802. x flow control Simple Network Management Protocol (SNMP) II statistics, Ethernet like MIB, Ethernet MIB ( 802.3 z, Clause 30)