Creality CR-6 Max Large Build Volume FDM 3D Printer 400 x 400 x 400mm, 2021 Newest Auto Level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply

Large Build Volume: The CR-6 Max features a 400 x 400 mm build plate, with a towering 400-mm maximum build height.This means that you will be able to print much larger than is facilitated by the CR-6 SE, without having to cut your model into pieces. As the printer use a 24-volt power supply, the heated bed will be able to reach higher temperatures quicker and more easily than has been possible on Creality’s earlier large-format machines. Reinforced Vertical Axis: Holding up the towering Z-axis are the supporting rods that Creality has previously dubbed “The Golden Triangle”. These metal supports help to reduce vibrations as the bed is moving back and forth.The appearance of these is a welcome, and means that you will be able to print taller without having to worry about excessive Z-wobble as you reach the upper limits of the build volume. Touch Screen: The CR-6 Max will also feature the same 4.3-inch portrait-oriented color touch screen as the CR-6 SE. For users who dislike the dial-operated blue LCDs of the past, this screen will be a welcome inclusion, allowing users to quickly and easily navigate the intuitive menus or check on the print status at a glance. Auto Leveling Sensor: The CR-6 Max features the same innovative leveling system as the CR-6 SE, using a force-based sensor. The Max will simply touch the nozzle to the bed at specific points, and a strain sensor on the hot end will detect the exact point at which the nozzle touches the glass. Glass Build Plate: Additionally, the CR-6 Max will still have a carborundum (silicon carbide) coated glass build plate, offering the same kind of adhesion that makes the Anycubic Ultrabase so popular. This build plate will be removable, but you’ll have to be careful in doing so due to its massive size.