Citel - Ccp-2da N (en) M/f - Cylix Ethernet 10base 5, 50 Ohm, N Type, M/f - Ccp Series

The CCP Series of data communication line surge protectors will ensure the reliable operation of coaxial based networking equipment running Ethernet, ArcNet, Satellite/Cable/Closed Circuit TV and most other wideband communication interfaces. The CCP Series devices guard sensitive data networks against lightning induced surges, AC power interference, electrostatic discharge and ground loop energies. Typical applications include: terminals, file servers, repeaters, and mainframes using Ethernet, security cameras and most other communication applications. High speed avalanche diode technology is used in conjunction with low capacitance circuitry enabling the protectors to function at a much greater bandwidth without causing signal degradation. This, in combination with their small size, makes the CCP exceedingly versatile. Standard units protect both center conductor(s) and shield circuits. A separate grounding wire on all units provides an isolated path to ground without adding an additional ground connection to the shield or network ground point. CCPs can also be specially configured to accommodate other standard connector interfaces (F, N, TNC, BNC, etc.). NOTE: This is a general description of this series please see title for actual product. State-of-the-art, avalanche diode technology Compact in-line installation High speed, high energy handling capability Low shunt capacitance to reduce signal loss STD. CLAMP VOLTAGE: ETHERNET(7.5 VOLTS), CCTV(7.5 VOLTS), CABLE/SATELLITE TV(90 VOLTS) PEAK PULSE CURRENT 10/1000 us s.c. waveform @Vcl: ETHERNET(132 AMPS), CCTV(132 AMPS), CABLE/SATELLITE TV(20 ka) RESPONSE TIME: Less than 5 nanoseconds MAXIMUM SHUNT CAPACITANCE: ETHERNET(