6 Pin to 3X 4 Pin Molex Hard Drive Power Adapter Cable for Some Types of EVGA Modular PSUs 20-in(50cm)

EVGA 6 Pin to 3x 4 Pin MOLEX hard drive power supply cable is used to connect EVGA PSU to riser card or hard drive. Support: Only EVGA PSUs such as SuperNOVA G1(650G1/750G1/1000G1), SuperNOVA G1+(650G1+/750G1+/850G1+/1000G1+), GS(650GS/850GS/1000GS/1050GS); SuperNOVA G2(650G2/750G2/850G2/1000G2/1300G2/1600G2), SuperNOVA G3(550G3/650G3/750G3/850G3/1000G3); SuperNOVA B2(750B2/850B2), B3(450B3/550B3/650B3/750B3/850B3); SuperNOVA P2(650P2/750P2/850P2/1000P2/1200P2/1600P2), SuperNOVA 1000PS; SuperNOVA T2(750T2/850T2/1000T2/1600T2), SuperNOVA nex650g, Supernova 450GM/550GM; Please note that it is not compatible with a semi-modular power supply such as EVGA 1000GQ. Specification: Gauge: 1007-18AWG(standard tin-coating copper wire) Cable Length: main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm) Connectors: 1x 6 pin male, 3x SATA 15 pin female Including: EVGA 6 Pin to 3x 4 Pin MOLEX hard drive power supply cable*1pcs; Self-adhesive tape*1pcs; Note: 1.This cable is just allowed to connect 2pcs riser cards at most. It will be damaged or burned at any time for connecting 3pcs riser cards; 2.This cable was only designed for EVGA PSUs, not compatible with another brand PSUs. If you use another brand PSUs, it will burn or damage the hard drive. Please check the points and description of the compatible types; 3.It is not compatible with semi-modular EVGA power supply such as EVGA 1000GQ EVGA.