Buy Xt Xinte Products online in United States

xt-xinte ngff m2 to pci-e 4x 1x slot riser card m key m.2 2260 2280 ssd port to pcie adapter converter multiplier for btc miner

xt-xinte ngff m2 to pci-e 4x 1x slot riser card m key m.2 2260 2280 ssd port to pcie adapter converter multiplier for btc miner miningFeatures: 1. This adapter allows the user to use the standard PCI-E 1x / 4x card NGFF (M.2) as the M key interface of the desktop or notebook. 2. Support PCI-E X1 / X4 card. 3. Support 2260/2280 type M.2 SSD module slot. 4. Only support M.2 slot 3 pci-e-based slot. 5. No additional soft drivers are needed. 6. With Voltage Indicator Lights Function: Allows users to use standard PCI-e 4x card in an M.2 NGFF M key slot in the Desktop or Laptop Transparent to the operating system and does not require any software drivers Specifications: PCI-e 4x Card to NGFF M.2 M Key PCIe Slot Adapter M.2 Specification Revision 0.9-3 Serial ATA Spec. Reversion 3.2 Support 2260/2280 type M.2 SSD module slot Only Supports an M.2 Socket 3 PCI-e-based slot Product Interface: PCI-E 1X PCI-E 4X Support System: Compatible with all WINDOWS systems, LINUX MAC Package: 1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card 1 x Cable 1 x Screw 1 x Tools

XT-XINTE PCIe 1 to 4 PCI-Express 16X Slots Riser Card PCI-E 1X to External 4 PCI-e USB 3.0 Adapter Multiplier Card for Bitcoin Miner

XT-XINTE PCIe 1 to 4 PCI-Express 16X Slots Riser Card PCI-E 1X to External 4 PCI-e USB 3.0 Adapter Multiplier Card for Bitcoin MinerItem Condition: NewBrand: XT-XINTEManufacturer: XT-XINTEProduct InformationThis extension is applicable to the mainboard PCI - E 1X slot, Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.The form a complete set of wire rod is customized, never grab line to plug in. Remember that!When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.Please allow 1-3mm error due to manual measurement and make sure you do not mind before ordering.Due to the original production of raw materials shortage and production batches are different, the card slot and the cable color will have some differences, but the card is the same function, please rest assured absolutely does not affect the normal use, hope to understand.Brand: XT-XINTE Bus Port: PCI-E Port Quantity: 4 X PCI-E USB Size: approx. 120 X 66 X 21 mm/4.72 X 2.6 X 0.83" Net Weight: approx. 41 g Gross Weight: approx. 73 g Package Size: approx. 130 X 90 X 25 mm/5.12 X 3.54 X 0.98" Supported OS: DOS, Linux, Windows XP/7/8/10 4 Slots brings great extendability. Plugs directly to the board without any extender cable, can be fixed to the case. PCI-E slot power solution, no extra power cable needed. Only one cable to the slot, easy and convenient to settle and install. With IC heat radiator. Package content: 1 X 1 to 4 PCI-E Adapter

XT-XINTE USB3.1 Type-C to NVMe M.2 Mobile Hard Disk Box 10Gbps M.2 SSD Enclosure M Key External Case Upgrade Version with USB3.1 Type-A to Type-C & Type-C to Type-C Cable (Black)

Upgrade version, better quality. With breath vents design, enhanced heat dissipation effect; with 2 USB3.1 cables: Type-A to Type-C and Type-C to Type-CMain Chip: Jmicron JMS583. USB 3.1 Gen 2 to PCI-e Gen3 x2 Bridge ControllerOnly support NVMe PCI-E M.2 M-Key SSD.(Doesn't support SATA-based B-Key M.2 SSD and AHCI-based PCI-E M.2 SSD, Fit for Samsung 970/960 EVO/PRO SSDBuilt-in M.2 NGFF interface, Typ-c USB3.1 external interface. High transmission speed to 10Gbps, No need to install drivers, no need drive, hot swappable.With LED indicator, easy to know the working status of SSD. Applicable to size 2230 / 2242 / 2260 / 2280 SSD.Does not read M.2 NVME WD Black.Upgrade version better quality, with breath vents design, enhanced heat dissipation effect; with 2 cables.Precautions: · Only for NVMe-based PCI-E M.2 M-Key SSD · Doesn't support SATA-based B-Key M.2 SSD. · Doesn't support AHCI-based PCI-E M.2 SSD. · Only support system: WinXP/Vista/linux/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or higher ·To ensure the transmission speed, please use our original USB3.1 data cable. ·In order to ensure the transmission speed, the computer must support the USB3.1 GEN2 10G interface. Using USB 3.0 will slow down the transfer speed. ·It could work with Samsung NVME M.2 hard disk . But Samsung Data Migration is not supported, because of Samsung_Data_Migration is used to clone the system. ·This product can only be used as a mobile hard disk box, and can not be cloned as a system disk. ·When using this product for the first time, you need to initialize the inserted hard disk for system partitioning. (Note that the hard disk data is saved in advance) **Any other questions, please contact with us, we will help to solve it effectively** Descriptions: Brand: XT-XINTE Product model: V2 XT-XINTE NVMe HDD Enclosure(Upgraded version, with breath vents) Main Chip: USB 3.1 Gen 2 to PCI-e Gen3 x2 Bridge Controller Protocol: NVMe External Interface: Type-C Built-in Interface: M-KEY M.2 (Does not support SATA protocol M. 2 hard disk). Theoretical Speed: 10Gbps Application : for 3D Game, 4K video ,HIFI Music, RAM Picture ect. HDD Enclosure size: 125mm*40mm*10mm Case Color: Silver or Black NVMe Supriority: 1. up the performance 2. decrease delay 3. decrease power dissipation 4. IPOS of SSD will increase Package include 1 x USB 3.1 Type-C NVME SSD Enclosure 1 x USB 3.1 Type-A to Type-C Cable1 x USB 3.1 Type-C to Type-C Cable 1 x Screwdriver