close

Buy Wheels Manufacturing Products online in United States

Sort by
Wheels Manufacturing Preload Tool Crank Arm Tool
Dimensions (Overall): 4.0 inches (L), 2.5 inches (W) x 4.0 inches (D)Weight: .87 poundsModel #: TL9000Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: TL9000, UPC: 811079026590Precision machined anodized aluminum designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.
Wheels Manufacturing
Wheels Manufacturing Socket Cap Bolt M5 x 16mm
Dimensions (Overall): 2.39 inches (L), 2.03 inches (H) x 2.03 inches (W) x 2.39 inches (D)Weight: .52 poundsBike compatibility: UniversalModel #: M5-16SHSSMaterial: Stainless SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 16 & bull; Bolt Size: 5 & bull; MPN: M5-16SHSS, UPC: 836572003589Bulk packaged, corrosion resistant stainless steel fasteners.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.15 inches (H) x 2.27 inches (W) x 4.79 inches (D)Weight: .46 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: Hollowtech IIWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Made in the USA & bull; Replaceable Enduro bearings & bull; Machined aluminum shell & bull; 2 year warranty & bull; MPN: BB30-OUT-15, UPC: 811079021649Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear. ZERØ Ceramic sealed bearings. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. Silicone VV-type 2-lip non-contact labyrinth seals for excellent bearing protection with minimum friction. Long-lasting Rheolube synthetic grease helps prevent contamination. Nylon/graphite retainer to further minimize friction. Replaceable Enduro bearings. Made in the USA.
Wheels Manufacturing
Wheels Manufacturing BBI Shaft Clamp Suspension Tool
Dimensions (Overall): 6.0 inches (L), 5.0 inches (W) x 6.0 inches (D)Weight: 3.09 poundsModel #: ST0005Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Kit includes 3 pairs of of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm & bull; Ideal for Suspension damper shafts, damper cylinders, air-spring cylinders, piston shafts and thru-axles & bull; MPN: ST0005, UPC: 811079026767Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm. Ideal for Suspension damper shafts, damper cylinders, air-spring cylinders, piston shafts and thru-axles.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 3.0 inches (L), .25 inches (H) x 1.5 inches (W)Weight: .11 poundsModel #: SHIM-SPACER-PKMaterial: SiliconeWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replacement spacer pack for Wheels Mfg 24mm (Shimano) bottom brackets & bull; Includes (2) silicone dust seals, 24mm I.D., (2) 0.5mm, 24mm I.D. crank spindle spacers, and (2) 1.0mm, 24mm I.D. crank spindle spacers & bull; MPN: SHIM-SPACER-PK, UPC: 811079025333Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing PRESS-8 Headtube Drift
Dimensions (Overall): 2.87 inches (L), 2.87 inches (W) x 2.87 inches (D)Weight: .58 poundsModel #: HT-OBWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Compatible with bearing presses using 1/2" diameter rod & bull; Drift is machined with multiple steps to fit common head tube inner diameters & bull; Fits the following Headtube inner diameters: 34mm, 44mm, 49mm and 56mm & bull; MPN: HT-OB, UPC: 811079024107Drift pack for sealed bearing installation press.
Wheels Manufacturing
Wheels Manufacturing BB86/92 Thread Together Bottom Brackets
Dimensions (Overall): 2.39 inches (H) x 2.15 inches (W) x 4.79 inches (D)Weight: .45 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: Press Fit BB86Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-3 sealed bearings & bull; Grade 10 chromium steel balls, 52100 High Carbon Chromium Alloy Races & bull; MPN: BB86-OUT-SRAM7, UPC: 811079022172Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing Axle: #20, 10x1x187mm Solid
Dimensions (Overall): 7.43 inches (L), .47 inches (H) x .47 inches (W)Weight: .31 poundsModel #: AXLE-20Material: SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 187 & bull; Threading: 10 x 1 & bull; MPN: AXLE-20, UPC: 8365720002814130 steel axles, heat-treated for strength and with rolled threads for easy assembly.
Wheels Manufacturing
Wheels Manufacturing Sealed Bearing Extractor for 608 and 688 bearings
Dimensions (Overall): 2.39 inches (L), .59 inches (W) x 2.39 inches (D)Weight: .27 poundsModel #: 608-EXTWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: 608-EXT, UPC: 836572004678Bearing-size specific cartridge bearing removal tool.
Wheels Manufacturing
Wheels Manufacturing Sealed Bearing Extractor for 6805 bearings
Dimensions (Overall): 7.25 inches (L), 2.75 inches (W) x 7.25 inches (D)Weight: 1.18 poundsModel #: 6805-EXTWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: 6805-EXT, UPC: 836572005088Bearing-size specific cartridge bearing removal tool.
Wheels Manufacturing
Wheels Manufacturing Bushing Removal Tool Suspension Tool
Dimensions (Overall): 4.19 inches (L), 3.23 inches (W) x 4.19 inches (D)Weight: .34 poundsModel #: TOOL-BUSHWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Fits: 1/2", 10mm and 12mm eyelets & bull; Includes bushing drifts and support sleeve with foot & bull; MPN: TOOL-BUSH, UPC: 836572007198Rear Shock pivot bushing removal tool.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 3.11 inches (L), .23 inches (H) x 1.67 inches (W) x 3.11 inches (D)Weight: .09 poundsModel #: BB30-30-2.5MMWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Can be used to take up any slack when using 30mm spindle cranks & bull; Inner diameter: 30mm & bull; Outer diameter: 41.5mm & bull; Thickness: 2.5mm & bull; MPN: BB30-30-2.5MM, UPC: 811079024503Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing 30mm Bearing Extractor Set
Dimensions (Overall): 1.5 inches (L), 1.75 inches (W) x 1.5 inches (D)Weight: .42 poundsModel #: BE-30MM-SETWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Made in the USA & bull; MPN: BE-30MM-SET, UPC: 811079024718These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing 29mm (DUB) Bearing Extractor Set
Dimensions (Overall): 1.43 inches (L), 1.07 inches (W) x 1.43 inches (D)Weight: .68 poundsModel #: BE-29MM-SETWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Extractor has 1/2" thru hole for use with Wheels Manufacturing 1/2" threaded rod press handles & bull; MPN: BE-29MM-SET, UPC: 811079025586These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing Wave Washers Small Part
Dimensions (Overall): 3.11 inches (L), .35 inches (H) x 2.27 inches (W) x 3.11 inches (D)Weight: .14 poundsModel #: WAVEWSH-30MM-10Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Used to set proper side-load in PF30, BB30 and similar bottom bracket systems when using 30mm spindle cranksets & bull; MPN: WAVEWSH-30MM-10, UPC: 836572009741Wave Washers for adjusting bearing play in bottom brackets.
Wheels Manufacturing
Wheels Manufacturing BB86/92 Thread Together Bottom Brackets
Dimensions (Overall): 2.15 inches (H) x 2.39 inches (W) x 4.79 inches (D)Weight: .45 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: Press Fit BB86Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-5 Angular Contact sealed bearings & bull; Angular contact ball bearings are particularly suitable for carrying combined axial and radial loads & bull; MPN: BB86-OUT-SRAMAC, UPC: 811079021960Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.27 inches (H) x 2.39 inches (W) x 4.91 inches (D)Weight: .47 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: Hollowtech IIWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-5 Angular Contact sealed bearings & bull; Angular contact ball bearings are particularly suitable for carrying combined axial and radial loads & bull; MPN: BB30-OUT-3, UPC: 811079020390Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing BB30 ABEC-3 Bearing and Clip Kit
Dimensions (Overall): .71 inches (H) x 2.15 inches (W) x 1.79 inches (D)Weight: .24 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: 30 mmWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Dimensions: OD: 42mm / ID: 30mm / Width: 7mm & bull; Direct replacement bearing for BB30 OEM systems & bull; Includes (2) Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips & bull; MPN: BB30-KIT, UPC: 836572007457BB30 replacement bearings and retention clips.
Wheels Manufacturing
Wheels Manufacturing Cartridge Bearing Extractor Set
Dimensions (Overall): 10.67 inches (L), 6.35 inches (W) x 10.67 inches (D)Weight: 4.9 poundsModel #: PRESS-5Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Made in the USA & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Expanding collet design grips bearing inner diameter & bull; MPN: PRESS-5, UPC: 836572007679These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 2.99 inches (L), .47 inches (H) x 1.67 inches (W) x 2.99 inches (D)Weight: .59 poundsModel #: BB30-30-5MMWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Can be used to take up any slack when using 30mm spindle cranks & bull; Inner diameter: 30mm & bull; Outer diameter: 41.5mm & bull; Thickness: 5.0mm & bull; MPN: BB30-30-5MM, UPC: 811079024510Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.25 inches (H) x 2.5 inches (W) x 4.75 inches (D)Weight: .48 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: Hollowtech IIWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-3 sealed bearings & bull; Grade 10 chromium steel balls, 52100 High Carbon Chromium Alloy Races & bull; MPN: BB30-OUT-1, UPC: 811079020376Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 4.75 inches (L), .25 inches (H) x 2.75 inches (W) x 4.75 inches (D)Weight: .1 poundsModel #: BB-1.8Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Use for adjusting chainline on frames with BSA or ITL threaded bottom bracket cups & bull; MPN: BB-1.8, UPC: 836572006696Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing Pusher for BB Bearing Extractor
Dimensions (Overall): 3.75 inches (L), 1 inches (W) x 3.75 inches (D)Weight: .44 poundsModel #: BE-PUSHERWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: BE-PUSHER, UPC: 811079024688These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 3.0 inches (L), .25 inches (H) x 1.5 inches (W) x 3 inches (D)Weight: .11 poundsModel #: SRAM-SPACER-PKMaterial: SiliconeWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replacement spacer pack for Wheels Mfg 22/24mm (GXP) bottom brackets & bull; Includes (1) silicone dust seal, 24mm I.D. drive side, (1) silicone dust seal, 22mm I.D. non-drive side, (1) 24mm wave washer, (2) 0.5mm, 24mm I.D. crank spindle spacers, and (2) 2 - 1.0mm, 24mm I.D. crank spindle spacers & bull; MPN: SRAM-SPACER-PK, UPC: 811079025326Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing Axle: #19, 9.5x155x26tpi Solid
Dimensions (Overall): 7.91 inches (L), .35 inches (H) x .35 inches (W)Weight: .59 poundsModel #: AXLE-19Material: SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 155 & bull; Threading: 9.5 (3/8") x 26tpi & bull; MPN: AXLE-19, UPC: 8365720011104130 steel axles, heat-treated for strength and with rolled threads for easy assembly.
Wheels Manufacturing
Wheels Manufacturing Bearing Retainer Kit, 120 Pieces
Dimensions (Overall): 14.21 inches (L), 2.01 inches (H) x 9.17 inches (W) x 14.21 inches (D)Weight: 4.46 poundsBike compatibility: UniversalModel #: BEAR-KITMaterial: PlasticWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Bottom bracket: 1/4x9=12; 5/16x9=16 (#64); 5/16x10=16 (#66), 5/16 x 12 (Qty 4) & bull; Headset: 5/32x22=8; 5/32x16=8; 3/16x16=8; 5/32x20=24 & bull; Bearing retainer assortment in all the popular sizes for headsets, hubs, and bottom brackets; includes plastic organizer & bull; Hubs: 3/16x7=8; 1/4x7=16 & bull; MPN: BEAR-KIT, UPC: 836572001592Shop kit of bearing retainers for loose-ball headsets, hubs and bottom brackets.
Wheels Manufacturing
Wheels Manufacturing BB86/92 Thread Together Bottom Brackets
Dimensions (Overall): 2.27 inches (H) x 2.51 inches (W) x 4.91 inches (D)Weight: .43 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: Press Fit BB86Spindle Interface Type: Hollowtech IIWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-3 sealed bearings & bull; Grade 10 chromium steel balls, 52100 High Carbon Chromium Alloy Races & bull; MPN: BB86-OUT-BB, UPC: 811079022165Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing 25mm Bearing Extractor Set
Dimensions (Overall): 1.79 inches (L), 1.19 inches (W) x 1.79 inches (D)Weight: .38 poundsModel #: BE-25MM-SETWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Made in the USA & bull; MPN: BE-25MM-SET, UPC: 811079024725These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing PRESS-8 Headset Cup Drift
Dimensions (Overall): 2.63 inches (L), 2.75 inches (W) x 2.63 inches (D)Weight: .58 poundsModel #: HS-OBWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Compatible with bearing presses using 1/2" diameter rod & bull; Drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings & bull; MPN: HS-OB, UPC: 811079024091Drift pack for sealed bearing installation press.
Wheels Manufacturing
Wheels Manufacturing 24mm Bearing Extractor Set
Dimensions (Overall): 1.43 inches (L), .95 inches (W) x 1.43 inches (D)Weight: .32 poundsModel #: BE-24MM-SETWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Made in the USA & bull; MPN: BE-24MM-SET, UPC: 811079024701These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.15 inches (H) x 2.63 inches (W) x 4.91 inches (D)Weight: .52 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-5 Angular Contact sealed bearings & bull; Angular contact ball bearings are particularly suitable for carrying combined axial and radial loads & bull; MPN: BB30-OUT-9, UPC: 811079020451Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing Axle: #06, 10x1x174mm Solid
Dimensions (Overall): 7.07 inches (L), .71 inches (H) x .71 inches (W)Weight: .3 poundsModel #: AXLE-06Material: SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 174 & bull; Threading: 10 x 1 & bull; MPN: AXLE-06, UPC: 8365720014624130 steel axles, heat-treated for strength and with rolled threads for easy assembly.
Wheels Manufacturing
Wheels Manufacturing Sealed Bearing Extractor for 6806 bearings
Dimensions (Overall): 3.11 inches (L), 1.43 inches (W) x 3.11 inches (D)Weight: 1.18 poundsModel #: 6806-EXTWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: 6806-EXT, UPC: 836572005514Bearing-size specific cartridge bearing removal tool.
Wheels Manufacturing
Wheels Manufacturing Rulers Measuring Tool
Dimensions (Overall): 12.35 inches (L), 2.99 inches (W) x 12.35 inches (D)Weight: .78 poundsModel #: RULERBEARWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Use to identify common cartridge and loose ball bearing sizes & bull; MPN: RULERBEAR, UPC: 836572006061High quality measuring tool, perfect for the shop or home mechanic.
Wheels Manufacturing
Wheels Manufacturing Axle: #10, 9.5x137x26tpi Q
Dimensions (Overall): 5.39 inches (L), .35 inches (H) x .35 centimeters (W)Weight: .18 poundsModel #: AXLE-10Material: SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 137 & bull; Threading: 9.5 (3/8") x 26tpi & bull; MPN: AXLE-10, UPC: 8365720010974130 steel axles, heat-treated for strength and with rolled threads for easy assembly.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.27 inches (H) x 2.51 inches (W) x 4.91 inches (D)Weight: .52 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; ABEC-3 sealed bearings & bull; Grade 10 chromium steel balls, 52100 High Carbon Chromium Alloy Races & bull; MPN: BB30-OUT-7, UPC: 811079020437Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing BB30 Pressfit Adaptor, 24mm Spindle Cranks
Dimensions (Overall): .83 inches (H) x 3.11 inches (W) x 2.99 inches (D)Weight: .59 ouncesBike compatibility: UniversalSpindle Interface Type: 24 mmWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames & bull; Delrin adaptors fit between bearings and crank spindle & bull; MPN: PF30-SHIM, UPC: 836572007983Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle.
Wheels Manufacturing
Wheels Manufacturing 22mm Bearing Extractor Set
Dimensions (Overall): 1.5 inches (L), 1.25 inches (W) x 1.5 inches (D)Weight: .28 poundsModel #: BE-22MM-SETWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Made in the USA & bull; MPN: BE-22MM-SET, UPC: 811079024695These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing Socket Cap Bolt M5 x 10mm
Dimensions (Overall): 2.51 inches (L), 2.51 inches (H) x 1.67 inches (W) x 2.51 inches (D)Weight: .43 poundsBike compatibility: UniversalModel #: M5-10SHSSMaterial: Stainless SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 10 & bull; Bolt Size: 5 & bull; MPN: M5-10SHSS, UPC: 836572003558Bulk packaged, corrosion resistant stainless steel fasteners.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.27 inches (H) x 2.51 inches (W) x 4.91 inches (D)Weight: .5 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; BB Shell Width (mm): 73mm & bull; BB/Frame Interface: BB30a & bull; MPN: BB30A-OUT-SRAM, UPC: 811079024749Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing Sealed Bearing Extractor for 6804 and 6904 bearings
Dimensions (Overall): 3.83 inches (L), 1.19 inches (W) x 3.83 inches (D)Weight: .56 poundsModel #: 6804-EXTWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: 6804-EXT, UPC: 836572005033Bearing-size specific cartridge bearing removal tool.
Wheels Manufacturing
Wheels Manufacturing Rulers Measuring Tool
Dimensions (Overall): 13.07 inches (L), 4.43 inches (W) x 13.07 inches (D)Weight: 2.21 poundsModel #: RULERWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Use to measure threads for cones, axles and locknuts & bull; MPN: RULER, UPC: 836572004227High quality measuring tool, perfect for the shop or home mechanic.
Wheels Manufacturing
Wheels Manufacturing Bottom Bracket Gauge Bottom Bracket Tool
Dimensions (Overall): 7.19 inches (L), 3.23 inches (W) x 7.19 inches (D)Weight: .22 poundsModel #: BBGAUGEWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: BBGAUGE, UPC: 811079026163The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. The gauge can measure bottom bracket width, bottom bracket shell inner diameter, crank spindle length, crank spindle diameter, bearing inner diameter. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.27 inches (H) x 2.51 inches (W) x 4.91 inches (D)Weight: .49 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: GXPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Made in the USA & bull; Replaceable Enduro bearings & bull; Machined aluminum shell & bull; 2 year warranty & bull; MPN: BB30-OUT-13, UPC: 811079021625Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear. ZERØ Ceramic sealed bearings. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. Silicone VV-type 2-lip non-contact labyrinth seals for excellent bearing protection with minimum friction. Long-lasting Rheolube synthetic grease helps prevent contamination. Nylon/graphite retainer to further minimize friction. Replaceable Enduro bearings. Made in the USA.
Wheels Manufacturing
Wheels Manufacturing 3mm rear Axle Spacers, Bag of 20
Dimensions (Overall): 3.83 inches (L), .23 inches (H) x 2.51 centimeters (W)Weight: .14 poundsModel #: AS-3Material: AluminumWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: AS-3, UPC: 836572001974Machined aluminum axle spacer for fine tuning hub spacing or as replacement axle spacer.
Wheels Manufacturing
Wheels Manufacturing Axle: #03, 10x1x141mm QR
Dimensions (Overall): 5.87 inches (L), .47 inches (H) x .71 inches (W)Weight: .21 poundsModel #: AXLE-03Material: SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 141 & bull; Threading: 10 x 1 & bull; MPN: AXLE-03, UPC: 8365720010804130 steel axles, heat-treated for strength and with rolled threads for easy assembly.
Wheels Manufacturing
Wheels Manufacturing Crank and Bottom Bracket Spacers Small Part
Dimensions (Overall): 4.79 inches (L), .23 inches (H) x 3.11 inches (W) x 4.79 inches (D)Weight: .14 poundsModel #: BB-2.5Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Use for adjusting chainline on frames with BSA or ITL threaded bottom bracket cups & bull; MPN: BB-2.5, UPC: 836572005699Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
Wheels Manufacturing
Wheels Manufacturing Flat Washers M5 100 Pack
Dimensions (Overall): 1.67 inches (L), 1.55 inches (H) x 1.67 inches (W) x 1.67 inches (D)Weight: .19 poundsBike compatibility: UniversalModel #: M5-FWSSMaterial: Stainless SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: M5-FWSS, UPC: 836572003046Corrosion resistant stainless steel washers.
Wheels Manufacturing
Wheels Manufacturing 52mm Receiver Cup for BB Bearing Extractors
Dimensions (Overall): 2.51 inches (L), 2.51 inches (W) x 2.51 inches (D)Weight: .36 poundsModel #: RC-52Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 11-piece set & bull; Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37 & bull; Made in the USA & bull; MPN: RC-52, UPC: 811079024923These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
Wheels Manufacturing
Wheels Manufacturing Fastener Kits Fastener Kits
Dimensions (Overall): 9.23 inches (L), 1.43 inches (H) x 5.03 inches (W) x 9.23 inches (D)Weight: 1.38 poundsBike compatibility: UniversalModel #: 456-KITSSWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: 456-KITSS, UPC: 836572000823Metric fastener kit with an assortment of nuts, bots and washers.
Wheels Manufacturing
Wheels Manufacturing Socket Cap Bolt M3 X 10mm
Dimensions (Overall): 2.99 inches (L), .47 inches (H) x .47 inches (W) x 2.99 inches (D)Weight: .1 poundsBike compatibility: UniversalModel #: M3-10SHMaterial: Stainless SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: M3-10SH, UPC: 836572002964Bulk packaged, corrosion resistant stainless steel fasteners.
Wheels Manufacturing
Wheels Manufacturing GXP-LEFT Open Bore Drift
Dimensions (Overall): 1.79 inches (L), 2.03 inches (W) x 1.79 inches (D)Weight: .23 poundsModel #: GXP-LEFTWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Machined step at 22mm OD fits cartridge bearing center & bull; Sold individually & bull; Used to press 22 x 37 x 8 sealed bearings into bottom bracket cups and direct fit frames like TREK BB90 & bull; MPN: GXP-LEFT, UPC: 811079021823Press adaptors for sealed bearing installation press.
Wheels Manufacturing
Wheels Manufacturing Socket Cap Bolt M5 x 20mm
Dimensions (Overall): 2.51 inches (L), 1.55 inches (H) x 1.55 inches (W) x 2.51 inches (D)Weight: .33 poundsBike compatibility: UniversalModel #: M5-20SHSSMaterial: Stainless SteelWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Length: 20 & bull; Bolt Size: 5 & bull; MPN: M5-20SHSS, UPC: 836572003602Bulk packaged, corrosion resistant stainless steel fasteners.
Wheels Manufacturing
Wheels Manufacturing BB30 Bearings Cartridge Bearing
Dimensions (Overall): 2.4 inches (L), .65 inches (H) x 1.85 inches (W) x 2.4 inches (D)Weight: .21 poundsBike compatibility: UniversalModel #: SB-6806Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; ABEC-3 grade replacement BB30 bearings & bull; Fits all standard BB30 bottom brackets & bull; Width: 7mm & bull; MPN: SB-6806, UPC: 836572007389BEARING BB WMFG BB30 BEARING ONLY PR ABEC-3 grade replacement BB30 bearings. Fits all standard BB30 bottom brackets.
Wheels Manufacturing
Wheels Manufacturing BB30 Thread Together Bottom Brackets
Dimensions (Overall): 2.25 inches (H) x 2.25 inches (W) x 4.75 inches (D)Weight: .46 ouncesBike compatibility: UniversalBB Shell Width: 73 millilitersBB/Frame Interface: BB30Spindle Interface Type: Hollowtech IIWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Replaceable Enduro bearings & bull; Made in the USA & bull; BB Shell Width (mm): 73mm & bull; BB/Frame Interface: BB30a & bull; MPN: BB30A-OUT-SHIM, UPC: 811079024732Machined aluminum shell threads together for precise bearing alignment and frame fit, reducing bottom bracket creaking and premature bearing wear.
Wheels Manufacturing
Wheels Manufacturing BB30 Bottom Brackets
Dimensions (Overall): .35 inches (H) x 2.51 inches (W) x 4.67 inches (D)Weight: .62 ouncesBike compatibility: UniversalBB Shell Width: 86 millilitersBB/Frame Interface: BB30Spindle Interface Type: DUBWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; For use with SRAM DUB cranks & bull; Includes 2 Enduro ABEC-3 bearings & bull; Includes 2 retaining clips & bull; Bearing dimensions: OD = 42mm, ID = 29mm, Width = 7mm & bull; MPN: BB30-KIT-DUB, UPC: 811079025661This Wheels Manufacturing service kit for BB30/BB30A systems includes bearings and retaining clips.
Wheels Manufacturing
Wheels Manufacturing BB30 Retaining Clip
Dimensions (Overall): 2.15 inches (L), .11 inches (H) x 1.55 inches (W) x 2.15 inches (D)Weight: .1 poundsModel #: BB30-CLIPWarranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Retainer clips keep the BB30 (6806) bearings in place & bull; MPN: BB30-CLIP, UPC: 836572007464BB30 replacement bearings and retention clips.
Wheels Manufacturing
Wheels Manufacturing Bearing Drift Pack for Hubs
Dimensions (Overall): 4.43 inches (L), 3.11 inches (W) x 4.43 inches (D)Weight: .96 poundsModel #: DRIFTSET-HUB1Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; 10mm ID hole, for use with Wheels Manufacturing bearing press handles & bull; Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000 and 6001 & bull; MPN: DRIFTSET-HUB1, UPC: 836572006948Drift pack for sealed bearing installation press.
Wheels Manufacturing
Wheels Manufacturing Suspension Tool Suspension Tool
Dimensions (Overall): 4.0 inches (L), 2.5 inches (W) x 4.0 inches (D)Weight: .84 poundsModel #: TL9001Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; MPN: TL9001, UPC: 811079026606Precision machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small pocket sized tool allows for easy trail side adjustments.
Wheels Manufacturing
Wheels Manufacturing Headset Cup Press Headset Tool
Dimensions (Overall): 18.59 inches (L), 3.35 inches (W) x 18.59 inches (D)Weight: 3.35 poundsModel #: PRESS-8Warranty: Multiple Warranties and/or Time Frames Apply. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, & bull; Includes two multiple-size Drifts (TL4146, TL4147) & bull; Made in the USA and laser etched for easy identification & bull; One drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings & bull; One drift is machined with multiple steps to fit common head tube inner diameters & bull; MPN: PRESS-8, UPC: 811079024084Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift had two sizes to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings.
Wheels Manufacturing
Back to Top