Teradek Dual-Band Wireless Antenna #11-0020
The Teradek Replacement Dual-Band Wireless Antenna is a replacement antenna for Cube dual-band Wi-Fi encoders and decoders.
Teradek 10-0755 Cube-755 HD HEVC H.265 Encoder
What is HEVC? HEVC, also known as H.265, is a next-generation compression standard that offers a number of enhancements over H.264. Compared to AVC (H.264) compression, HEVC is 50% more efficient, which translates into maintaining the same video quality at half the bitrate or double the video quality at the same bitrate. Real-Time H.265 (HEVC) and H.264 (AVC) Encoder Dual-Band 2.4/5.8GHz Wi-Fi, Ethernet and USB Interfaces HDMI and SDI Video Inputs Camera Top Form Factor Built-In Color Grading On-Board SD Card Recording Two-Pin Connector-Type Power Input The new Cube 700 and Slice 756 series The new Cube 700 and Slice 756 series bring the latest in compression technology at a size and price point never before seen. What makes HEVC Cube and Slice unique Can use both HEVC (H.265) and AVC (H.264) High Profile compression Compatible with Core transcoding engine. This allows you to take advantage of HEVC encoding when streaming to Core, while delivering your content in AVC to your destination Dual input (HDMI + 3G-SDI) Compatible with the new Bond expansion module, allowing you to turn your Cube 700 series into a professional bonding solution GigE and 2.4 / 5GHz 802.11ac Wi-Fi built-in Bitrate support up to 30Mbps Streaming resolution support up to 1080p60 Compatible with T-21, Sencore and Vitec HEVC decoders Uses just 6W of power What can Cube and Slice codecs do? Stream to any online video platform, such as Facebook, YouTube, Twitch, Periscope and more Stream point-to-point to decoders over the internet or on local networks with latency as low as 80ms Comprehensive protocol support: MPEG-TS, RTSP, RTMP, HLS, TDS Monitor your live video feed on an iOS device for confidence or local configuration Turn your camera into a wireless video feed for Teradek's Live:Air iOS switcher application
Teradek Mounting Bracket for Bolt 1000, 3000 and 500 Receivers #11-0785
The Bolt Mounting Bracket is used to provide additional mounting options for your Bolt. Simply attach the bracket with the two included body screws and utilize the included 1/4-20" bolts to mount on plates and other threaded 1/4-20" points. Utilize the threaded 1/4-20" points to use with camera arms and stands.
Teradek 10-0020 Cellular 4G LTE Module in America 4P-USB Cable
Node is a high performance 3G / 4G / LTE modem that provides exceptional connectivity and weather resistance compared to traditional USB modems. With comprehensive data band support, Node can use any SIM card in regions around the world for cellular connectivity. 3G / 4G / LTE modem 2 to 3 times the performance of carrier branded modems Super durable and weather resistant aluminum Chassis Compatible with Cube 600, 700 and 800 series, Bond II / Pro / Expansion Module, VidiU Pro, Link Exceptional cellular connectivity Node offers superior cellular connectivity over off-the-shelf modems from major network carriers. With 2 to 3 times the performance of carrier branded modems, Node allows you to go live from locations with the poorest cellular connectivity. Worldwide data band support Node can operate on most 3G / 4G/ LTE data band for any region around the world. Super durable and weather resistant Traditional USB modems are flimsy and are easily broken during extended use in the field. Node solves the durability problem with an aluminum chassis, 1/4"-20 and 4-40 mounting options and a 4-pin locking connector to attach to your Teradek device. USB and 4-pin connectors Choose between USB and 4-pin connectors to connect the Node modem to your Teradek device. 4-pin connectors offer weather resistance and a stronger link to your rig, allowing you to put the system through regular abuse without risking disconnection. Compatible with several Teradek products Node modems can be used with Teradek Cube 600, 700 and 800 series, Bond II / Pro / Expansion Module, VidiU Pro and the new Link bonded mobile hotspot.
Teradek BIT 109 11" 2-Pin Lemo to PowerTap Cable #11-0109
BIT 109 2pin Lemo to PowerTap, 11in Cable.
Teradek BIT 136 36" 2-Pin Lemo to PowerTap Cable #11-0137
BIT 136 2pin Lemo to PowerTap, 36in Cable.
Teradek Bolt Pro 2000 3G-SDI and HDMI Wireless Video Transmitter #10-0991
The Teradek Bolt 2000 is a zero delay wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2000ft over the unlicensed 5GHz band. Bolt 2000 is multicast capable up to 4 receivers and comes in 3G-SDI, HDMI and dual input/output varieties. All Bolt systems include the new GRAB engine, which allows users to output over USB 3.0 directly into a DIT cart or laptop. USB 3.0 GRAB Engine Capture cards are a thing of the past with Teradek's new GRAB Engine. Every Bolt RX includes a USB 3.0 output that allows you to ingest Bolt's uncompressed video feed directly into a computer or DIT cart with no added delay. Real-Time Cross Conversion & Extras All Bolt models support real-time format conversion from TX to RX, allowing you to automatically cross convert from HDMI to 3G-SDI (or vice versa) without any extra hardware. Each model also outputs a test pattern when the video signal is lost and both the 600 and 2000 models support quick RX pairing via the OLED screen and manual frequency selection.
Teradek Bolt LT Single Battery Plate for Sony L Series and Canon LP-E6, 14.4V
Single Battery Plate for Bolt ReceiversThis Single (Female) Battery Plate from Teradek allows you to secure a Teradek Bolt Receiver to either an Anton Bauer Gold Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max) to power your Teradek Bolt Receiver with the included Power Tap to 2pin Connector 11 inch cable.This can be used with the Teradek Antenna Array or as a standalone bracket as there are three 1/4 20" mounting points as well as two 1/4 20" pass-through slots.
Teradek BIT 012 Hot/Cold Shoe Mounting Hardware, 1.25" Thumb Screw #11-0012
BIT 012 - Hotshoe Hotshoe Mounting Hardware for Bolt, 1.25 in Thumb Screw.
Teradek COLR Duo LUT Box, Wireless Camera Control Bridge with 3G-SDI Input and Two 3G-SDI Outputs with Independent 33-Point 3D LUTs, Integrates with Pomfort LiveGrade Pro
COLR is a real-time LUT box, digital color processor and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look. During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors. COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application. Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal\u2019s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide. With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.
