speakercraft aim 7 two series 2 inceiling speaker each
SpeakerCraft AIM Series 2 has been completely re-crafted to support sophisticated installations, demanding sonic performance, and advanced object-based surround audio platforms such as Dolby Atmos(R), Auro-3D(R), and DTS:X(R). The re-crafting effort addresses every aspect of the speaker, from front to back, resulting in a sound solution you'll have to hear to believe. The Speakercraft AIM Series 2 breaks new ground by adapting technology that was once only utilized in large sound reinforcement experiences. By incorporating multiple tweeters in a line array, AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations so that listeners may enjoy a larger sweet spot. Complementing the ARC Tweeter Array is our updated WavePlane technology that acts as an acoustic lens, focusing the high frequency audio energy into the listening environment for a cleaner, wider, and richer sound. Front-Mounted Switch Allows for up to +/- 3dB of treble adjustment. Sensitivity: 88db 1W/1m. Maximum SPL: 107dB. Power Handling: 125 Watts. Impedance: 8 Ohm Nominal. Frequency Response: 40Hz-20kHz. Diameter x Depth: 9 5/8" x 5 1/2" (244mm x 140mm). Cut-Out Diameter: 8 7/16" (214mm). Factory sealed, white grill included, full manufacturer's warranty.UPC NO:664254021053 SKU:ADIB00V3SGEHQ
SpeakerCraft AIM 5 TWO Series 2 In-Ceiling Speaker
AIM Series 2 breaks new ground by adapting technology that was once only utilized in large sound reinforcement experiences. By incorporating multiple tweeters in a line array AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations so that listeners may enjoy a larger sweet spot. Complementing the ARC Tweeter Array is our updated Wave Plane technology that acts as an acoustic lens focusing the high frequency audio energy into the listening environment for a cleaner wider and richer sound. But its the enhanced aim-ability of the AIM Series 2 that presents all new options for sound designfrom home theater to whole home audio. Simply put every element of the AIM Series 2 has been re-crafted for heightened aesthetics and heightened sound. AIM 5 TWO Series 2 Features and Specifications: Flangeless appearance 5 1/4 Glass Fiber Cone Woofer with 15 degree Pivoting Capability ARC Tweeter Array incorporating three (3) - 5/8 Aluminum Tweeters with 15 o Pivoting 359 o Rotational Capability. Wave Plane Technology with Vortex Eliminators Acoustic Isolation Technology to minimize acoustic energy transfer to mounting and surrounding surfaces Front-Mounted Switch Allows for up to +/- 3dB of Treble Adjustment Timbre-Matched to all TWO Level Speakers Sensitivity: 87db 1W/1m Maximum SPL: 106dB Power Handling: 100 Watts Impedance: 8 Ohm Nominal Frequency Response: 42Hz-20kHz Diameter x Depth: 8 x 4 7/8 (203mm x 124mm) (with Grille) Cut-Out Diameter: 6.61 or 6 5/8 (168mm) About AIM Series 2: More revolutionary than evolutionary Speaker Craft AIM Series 2 has been 100% re-crafted to support sophisticated installations demanding sonic performance and advanced object-based surround audio platforms such as Dolby Atmos Auro-3D and DTS: X. The re-crafting effort addresses every aspect of the speaker from front to back resulting in a sound solution youll have to hear to believe. Defies All Conventions And Industry Norms AIM Series 2 adapts technology that was once only utilized in large sound reinforcement experiences and introduces the adjustable pivoting ARC Tweeter Array that is nothing short of groundbreaking. By incorporating multiple tweeters in a line array AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations. The ARC Tweeter Array lowers the crossover point to increase the sound pressure level at the critical mid-range frequencies so that acoustically listeners enjoy a much larger sweet spot. A Bolder Richer Sound Complementing the ARC Tweeter Array is the updated Wave Plane technology that acts as an acoustic lens focusing the high frequency audio energy into the listening environment for a cleaner wider and richer sound. Ordinary speakers only sound their best when you are directly underneath them but the Wave Plane assures optimal high frequency dispersion throughout the listening area. Taking Sound To New Levels The enhanced aim-ability of the AIM Series 2 presents new options for sound designfrom home theater to whole home audio. More than ever sound can be directed to a specific section of a room angled toward a seating area or wherever an audio impact is desired.
SpeakerCraft AIM 7 THREE Series 2 In-Ceiling Speaker
AIM Series 2 breaks new ground by adapting technology that was once only utilized in large sound reinforcement experiences. By incorporating multiple tweeters in a line array, AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations so that listeners may enjoy a larger sweet spot. Complementing the ARC Tweeter Array is our updated Wave Plane technology that acts as an acoustic lens, focusing the high frequency audio energy into the listening environment for a cleaner, wider, and richer sound. But it’s the enhanced aim-ability of the AIM Series 2 that presents all new options for sound design—from home theater to whole home audio. Simply put, every element of the AIM Series 2 has been recrafted for heightened aesthetics and heightened sound. AIM 7 Three Series 2 Features and Specifications: Flangeless appearance 7” Glass Fiber Cone Woofer with 15-degree Pivoting ARC Tweeter Array incorporating four (4) - 5/8” Silk Dome Tweeters with 15-degree Pivoting & 359-degree Rotational Capability Wave Plane Technology with Vortex Eliminators Acoustic Isolation Technology to minimize acoustic energy transfer to mounting and surrounding surfaces Front-Mounted Switch Allows for up to +/- 3dB of Dialog Presence and Treble Adjustment Timbre-Matched to all THREE Level Speakers Sensitivity: 89db 1W/1m Maximum SPL: 109dB Power Handling: 150 Watts Impedance: 8 Ohm Nominal Frequency Response: 37Hz-20kHz Diameter x Depth: 9 5/8” x 5 1/2” (244mm x 140mm) (with Grille) Cut-Out Diameter: 8.27" or 8 1/4” (210mm)
NEW SpeakerCraft VSR-100 Volume Control Unit (White) ASM90410W 201
NEW SpeakerCraft VSR-100 Volume Control Unit (White) ASM90410W 201 condition: New MPN: VSR-100Brand: SpeakerCraft
SpeakerCraft BB275 2 Channel Amplifier 75wx2w/ remote trigger {NEW}
Speaker Craft BB275 2 Channel Amplifier 75wx2w/ remote trigger {NEW} condition: New Country/Region of Manufacture: China Type: stereo amplifier Brand: Speaker Craft Model: BB275 MPN: BB275 Number of Channels: 2 Code: ea5-222873000291367
Speakercraft Aim 7 Two In-Ceiling pivoting Speaker (EACH)
Speakercraft Aim 7 Two In-Ceiling pivoting Speaker (EACH) Item Condition: New Brand: speakercraft Manufacturer: Speakercraft Item model number: ASM82721 Product Information - Pivoting 1" Silk Dome Tweeter - Front Mounted Treble Equalization Switch - Timbre-Matched to All Two Series Speakers - Power Recommendations: 5 - 125 Watts (Undistorted) The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industrys history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. Pivoting and Rotating 7" Resin Reinforced Fiberglass Cone WooferPivoting 1" Silk Dome TweeterTimbre-Matched to All Two Series SpeakersFront Mounted Treble Equalization SwitchThe AIM7 Series features fully pivoting woofers and independently pivoting tweeters, allowing the entire speaker to be aimed toward the listener. Speakercraft was the first company to introduce a pivoting speaker. They patented the design and will defend their right to be the only company to offer their dealers this superior technology. SpeakerCraft’s AIM technology was first utilized in a 6” ceiling speaker. The ability to focus the sound toward the listening area was instantly recognized as a tremendous advantage and the popularity of these speakers once again confirmed the fact that SpeakerCraft is the industry leader. After years of dominating the in-ceiling category, our engineers revisited the original AIM series with the goal of squeezing even more performance out of the 6” format. The result of this effort is the AIM7 series.
SpeakerCraft SC-PR-CRS6-ZERO-6 6-1/2" (160mm) In-Ceiling Speakers (6-Pack)
SpeakerCraft SC-PR-CRS6-ZERO-6 Profile CRS6 Zero 6-1/2" (160mm) In-Ceiling Speakers (6-Pack) Brand: Speakercraft MPN: SC-PR-CRS6-ZERO-6 Condition: New SpeakerCraft SC-PR-CRS6-ZERO-6 Profile CRS6 Zero 6-1/2" (160mm) In-Ceiling Speakers (6-Pack) The SpeakerCraft Profile CRS6 ZERO in-ceiling speaker delivers immersive audio with its 6-1/2” polypropylene woofers and 1/2” Mylar tweeters. The magnetic bezel-less grille enables it to be easily painted to blend into any home environment. Sold in a convenient 6-pack, the Profile CRS6 ZERO is ideal for new home developments and any time exceptional sound needs to be delivered with an eye to the budget. Premium Sound, Budget Price & nbsp; Don't let the price fool you. The Profile CRS6 Zero uses top shelf components that deliver great sound on a budget Magnetic Grille A magnetic bezel-less grille allows for easy painting to match any deco Convenient Multipack Sold in a Convenient 6-pack for installations where multiple speakers are required All-Cardboard packaging Minimal cardboard packaging allows for easy disposal/recycling after the job SPECIFICATIONS: • Woofer Size: 6-1/2” / 160mm • Woofer Construction: Polypropylene Cone • Tweeter: 1/2” / 13mm Fixed Mylar Dome • Frequency Response: 54Hz-20kHz • Impedance: 8 (Ohms) • Power Handling: 100 (Watts) • Sensitivity: 88 (dB) • Dimensions: 9-7/16” / 240mm Diameter x 3-7/8” / 98.4 mm Deep • Hole Cutout Dimensions: 8-1/4” / 210 mm Diameter • Mounting Depth: 3.75 ” / 95mm
SpeakerCraft MT6 Three - In-Wall or Ceiling Speaker Includes White Grill - (Multipack of 2 pair, 4 speakers total)
This bundle contains two pairs of SpeakerCraft MT6 Three (ASM87630) In-Wall Speakers with adjustable crossovers.
SpeakerCraft MT6 THREE | ASM87630
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.
AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.
These speakers are left and right specific and only sold in pairs.
Specifications
General
Family - Specialty
Woofer Size - 6.5 (Inches)
Woofer Construction - 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug
Frequency Response - 40Hz - 20kHz
Impedance - 8 (Ohms)
Power Handling - 125 (Watts)
Sensitivity - 90 (dB)
Timbre - Timbre-Matched to All Three Series Speakers
Hole Cutout Dimensions - (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm)
Lifetime Warranty
Other Specifications
6 1/2" Aluminum Cone Woofer with Dual Voice Coil, Filleted Rubber Surround & Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Buttons Allow for up to ±3dB of Bass and Treble Adjustment
SpeakerCraft AIM 8 THREE Series 2 In-Ceiling Speaker
AIM Series 2 breaks new ground by adapting technology that was once only utilized in large sound reinforcement experiences. By incorporating multiple tweeters in a line array AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations so that listeners may enjoy a larger sweet spot. Complementing the ARC Tweeter Array is our updated Wave Plane technology that acts as an acoustic lens focusing the high frequency audio energy into the listening environment for a cleaner wider and richer sound. But its the enhanced aim-ability of the AIM Series 2 that presents all new options for sound designfrom home theater to whole home audio. Simply put every element of the AIM Series 2 has been re-crafted for heightened aesthetics and heightened sound. AIM 8 THREE Series 2 Features and Specifications: Flangeless appearance 8 Aluminum Cone Woofer with 15 o Pivoting Capability ARC Tweeter Array incorporating two (2) - 3/4 and two (2) - 5/8 Aluminum Dome Tweeters with 15 o Pivoting 359 o Rotational Capability Wave Plane Technology with Vortex Eliminators Acoustic Isolation Technology to minimize acoustic energy transfer to mounting and surrounding surfaces Front-Mounted Switches Allow for up to +/- 3dB of Dialog Presence and Treble Adjustment Timbre-Matched to all THREE Level Speakers Sensitivity: 88db 1W/1m Maximum SPL: 110dB Power Handling: 175 Watts Impedance: 8 Ohm Nominal Frequency Response: 35Hz-20kHz Diameter x Depth: 11 1/16 x 6 (280mm x 152mm) (with Grille) Cut-Out Diameter: 9.76" or 9 3/4" (248 mm) About AIM Series 2: More revolutionary than evolutionary Speaker Craft AIM Series 2 has been 100% re-crafted to support sophisticated installations demanding sonic performance and advanced object-based surround audio platforms such as Dolby Atmos Auro-3D and DTS: X. The re-crafting effort addresses every aspect of the speaker from front to back resulting in a sound solution youll have to hear to believe. Defies All Conventions And Industry Norms AIM Series 2 adapts technology that was once only utilized in large sound reinforcement experiences and introduces the adjustable pivoting ARC Tweeter Array that is nothing short of groundbreaking. By incorporating multiple tweeters in a line array AIM Series 2 delivers focused high frequencies farther into the listening area than standard tweeter configurations. The ARC Tweeter Array lowers the crossover point to increase the sound pressure level at the critical mid-range frequencies so that acoustically listeners enjoy a much larger sweet spot. A Bolder Richer Sound Complementing the ARC Tweeter Array is the updated Wave Plane technology that acts as an acoustic lens focusing the high frequency audio energy into the listening environment for a cleaner wider and richer sound. Ordinary speakers only sound their best when you are directly underneath them but the Wave Plane assures optimal high frequency dispersion throughout the listening area. Taking Sound To New Levels
SpeakerCraft SC2-50 Two Channel High Current Power Amplifier 50W/CH 225W Bridged
SpeakerCraft SC2-50 Two Channel High Current Power Amplifier 50W/CH 225W Bridged Brand: SpeakerCraft MPN: SC2-50 Condition: New -Digital, high current bridgeable stereo amplifier -Independent level controls -Three turn-on modes: music sense, voltage trigger, and manual -Voltage trigger input accepts 3-24VAC/DC -Auto switching 110V-230V power supply -Audio circuitry constructed with the finest parts available, including 1% metal film resistors, high quality capacitors and oversized heat sinks for clear and uncolored sound. SPECIFICATIONS: -50 watts RMS per channel into 8 Ohms (all channels driven) -Channels are bridgeable to 225 watts RMS into 8 Ohms -100 watts RMS per channel into 4 Ohms (all channels driven) -Total Harmonic Distortion: 0.2 % THD from 20Hz to 20kHz -12-volt control out -Removable line cord -17 ¼” ( 43.81 cm) wide – 2 ¼” ( 5.6 cm) high (including feet) -13 ½” ( 34.35 cm) deep -Weight: 10.8 lb. ( 4.9 kg)
SpeakerCraft MT6 Three - In-Wall or Ceiling Speaker Includes White Grill - (Multipack of 3 pair, 6 speakers total)
This bundle contains three pairs of SpeakerCraft MT6 Three (ASM87630) In-Wall Speakers with adjustable crossovers.
SpeakerCraft MT6 THREE | ASM87630
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.
AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.
These speakers are left and right specific and only sold in pairs.
Specifications
General
Family - Specialty
Woofer Size - 6.5 (Inches)
Woofer Construction - 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug
Frequency Response - 40Hz - 20kHz
Impedance - 8 (Ohms)
Power Handling - 125 (Watts)
Sensitivity - 90 (dB)
Timbre - Timbre-Matched to All Three Series Speakers
Hole Cutout Dimensions - (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm)
Lifetime Warranty
Other Specifications
6 1/2" Aluminum Cone Woofer with Dual Voice Coil, Filleted Rubber Surround & Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Buttons Allow for up to ±3dB of Bass and Treble Adjustment
SpeakerCraft AIM275 7" 2-way In-Ceiling Speaker Kevlar Woofer ARC Tweeter Array
SpeakerCraft AIM275 7" 2-way In-Ceiling Speaker w/ Kevlar Woofer, Aluminum/Magnesium ARC Tweeter Array Brand: SpeakerCraft MPN: AIM275 Condition: New PROPRIETARY ARC TWEETER ARRAY ™ DESIGN -Uniform, aim-able high-frequency coverage. -Lower crossover point through increased number of drivers gives increased sound pressure level at the critical mid-range frequencies resulting in a sweeter sweet spot. -Smoother power response, higher power handling capability and less distortion than a single tweeter design. -New speaker housing design allows for a +/-15 degree pivoting woofer, totaling 30 degrees of adjustment, plus Arc-Tweeter Array with +/- 15 degree toe-in/toe-out adjustment, and 359 degrees of rotational flexibility. EXCLUSIVE PATENTED DESIGN & ACOUSTIC ISOLATION TECHNOLOGY™ -Co-molded, lower density compounds minimize structural resonance in the surrounding wall/ceiling. -Updated WavePlane design enhances high frequency dispersion. -Acoustic Vortex Eliminators reduce sound turbulence. U. S. ENGINEERED & DESIGNED TRANSDUCER, MOTOR, AND CROSS-OVER -Increased stiffness of the curvilinear cone design enables the cone to deliver energy to the air more effectively for greater bass response. -Butyl elastomer surround creates a more consistent sound with less disruption. -Non-conductive Kapton formers, copper caps and extended poles reduce distortion. -Improved power handling and sensitivity limits compression for louder and cleaner sound. -Symmetrical & A-symmetrical Linkwitz-Riley crossover designs for highest sound quality. INNOVATIVE INDUSTRIAL DESIGN & MATERIALS -Kevlar™ Fiber Woofer + Aluminum-Magnesium Dome Tweeters -Back mounted grille assembly magnets improve aesthetics and longevity of grille assembly SPECIFICATIONS: Family: AIM Series 2 Woofer Size: 7" Woofer Construction: Kevlar Pivoting Woofer Tweeter: 4 x 5/8" Aluminum/Magnesium Pivoting Tweeter with 359° Rotational Adjustability Frequency Response: 35Hz-20kHz Impedance: 8 (Ohms) Power Handling: 150 Watts Sensitivity: 90 dB Crossover: Asymmetrical 2nd/3rd Order Linkwitz Riley Timbre: Timbre-Matched to all FIVE Level Speakers Switches: Tweeter Level and Dialog Dimensions: 9-5/8" [244 mm] Diameter x 5-1/2 [140 mm] Depth Hole Cutout Dimensions: 8-1/4" [210 mm] Diameter
SpeakerCraft MT6 Three ASM87630 In-Wall or In-Ceiling Loudspeakers (pair)
SpeakerCraft MT6 THREE | ASM87630
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.
AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.
These speakers are left and right specific and only sold in pairs.
Specifications
General
Family - Specialty
Woofer Size - 6.5 (Inches)
Woofer Construction - 6 1/2" Polypropylene Cone Woofer with Filleted Rubber Surround & Phase Plug
Frequency Response - 40Hz - 20kHz
Impedance - 8 (Ohms)
Power Handling - 125 (Watts)
Sensitivity - 90 (dB)
Timbre - Timbre-Matched to All Three Series Speakers
Dimensions - (H x W x D) 12 ¼" x 8 3/16" x 3 3/16" (311 mm x 208 mm x 81 mm)
Hole Cutout Dimensions - (H x W) 10 9/16" x 6 9/16" (268 mm x 167 mm)
Lifetime Warranty
Other Specifications
6 1/2" Aluminum Cone Woofer with Dual Voice Coil, Filleted Rubber Surround & Phase Plug
Pivoting 1" Aluminum Dome Tweeter
Front-Mounted Buttons Allow for up to ±3dB of Bass and Treble Adjustment
AIM LCR 3 In-Wall Speaker - Each (White)
With a dual woofer and a single dome tweeter configuration the In-wall AIM pivots side to side or up and down (depending on vertical or horizontal installation) by 17 degrees. The pivoting tweeters can be angled an additional 30 degrees. This allows physical tow-in or vertical adjustments while remaining completely flush in the wall. This proprietary feature sets the AIM LCR apart from all other in-wall offerings in the industry.
The In-wall AIM LCR will be available in two models with the same driver configuration. The AIM LCR One features two 5 1/4 inch injection molded graphite cone woofers with phasing plugs and a single 1 inch silk dome tweeter. The AIM LCR Three upgrades to dual 5 1/4 inch magnesium cone woofers with phasing plugs and a single magnesium dome tweeter.
With the number of flat panel displays and full in-wall home theaters being installed today, the In-wall AIM LCR is a perfect solution for the entire front sound stage left, center and right.
Pivoting Woofers:
The woofers in all AIM LCR models pivot independently of the tweeters, meaning you can direct the low frequencies for a precise acoustical fit. It's a feature you won't find in ordinary in-wall speakers. The AIM LCR Series is your assurance of proper phase, accurate frequency response and enhanced stereo imaging. And when placed as rear channels in a home theater configuration, they can be directed away from the listener. This gives surround sound the critical degree of diffusion it needs.
Pivoting Tweeters:
The tweeters in the AIM LCR models pivot independently from the woofers, meaning you can direct the critical high frequencies precisely at the listening area.
Product Specifications:
Efficiency: 90dB 1W/1m
Power Handling: 5 - 100 Watts
Impedance: 8/6 Ohms, Depending on Switch Settings
Frequency Response: 50Hz - 20kHz ±3dB
Dimensions: (H x W x D) 9 1/4" x 17 7/16" x 4" (235 mm x 443 mm x 102 mm)
Wall Cut-Out: (H x W) 7 1/2" x 14 1/4" (190 mm x 362 mm)
Speakercraft ASM54631 AIM LCR3 Three Dual 3" 2Way In-Wall Speaker w/ FREE Bracket
Speakercraft ASM54631 Profile AIM LCR3 Three Pivoting Dual 3" 2-Way In-Wall Speaker w/ FREE New Construction Bracket Brand: Speakercraft MPN: ASM54631 + BKT74300E Condition: New SpeakerCraft PROFILE AIM LCR3 THREE | ASM54631 Profile AIM LCR3 Three AIM LCR speakers deliver powerful, compelling home theater sound in slim, easy-to-mount in-wall models. The front baffles tilt so you can aim the sound exactly where you want it. AIM LCR and AIM LCR3 models are available with Profile grilles as an option. Includes New Construction Bracket FREE. SPECIFICATIONS • Family: Profile AIM LCR • Woofer Size: 3 (Inches) • & nbsp; Woofer Construction: Two 3" Aluminum Cone Woofers with Phase Plugs • & nbsp; Tweeter: Pivoting Aluminum Dome • & nbsp; Frequency Response: 78Hz - 20kHz • & nbsp; Impedance: 8 (Ohms) • & nbsp; Power Handling: 60 (Watts) • & nbsp; Sensitivity: 86 (dB) • & nbsp; Timbre: Timbre-Matched to All Three Series Speakers • & nbsp; Switches: Front-Mounted 2-Position Treble Adjustment Switch • & nbsp; Dimensions: (H x W x D) 10-1/4" x 6" x 3" (260 mm x 152 mm x 76 mm) • & nbsp; Hole Cutout Dimensions: (H x W) 9" x 4-3/4" (227 mm x 120 mm) • & nbsp; Includes New Construction Bracket FREE
SpeakerCraft AIM7Two Fully Pivoting High Fidelity In-Ceiling Loudspeaker - Each
The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand.
Speakercraft 4" All-Weather Outdoor Speaker Kit with 8" Hardscape Subwoofer
Speakercraft SC-TERR- 4.1 -HS, 4" All-Weather Outdoor Speaker Kit with 8" Hardscape Subwoofer Brand: Speakercraft MPN: SC-TERR- 4.1 -HS Condition: New SpeakerCraft Terrazza™ is a value-priced outdoor speaker kit that over-delivers on performance. Not every outdoor space can accommodate an in-ground subwoofer, so the SC-TERR- 4.1 -HS Terrazza introduces an all-new Hardscape above-ground Subwoofer paired with four 4" Terrazza Satellite speakers for an exceptional sound experience. Unlike high performance landscape systems that require expensive high-power amplifiers, the Terrazza Landscape Series is designed to be used with lower powered distributed audio amplifiers or extended audio zones (like Zone 2) from conventional AVRs. The system can be expanded to up to an 8.2 system. - Weatherproof Satellite Speaker Design. Weatherproof fiberglass reinforced ABS enclosures are rugged, ensure years of reliable performance and are no match for weed whackers and outdoor lawn equipment. - In the Garden or on the Deck. SpeakerCraft Terrazza kits come with either a Burial or Hardscape Subwoofer which are built using a weatherproof, low-noise Rotational Molded Polyethylene enclosures. Both include a high Excursion eight-inch DVC woofer with rubber surround and includes a 2nd order crossover on both channels and are perfect for the deck (SC-TERR- 4.1 -HS) or in the flowerbed (SC-TERR- 4.1 -BU) - High Efficiency Sound. The SpeakerCraft Terrazza system is designed for use with amplifiers with a minimum of 30W of power which makes it a great addition to distributed audio amplifiers or additional zones from an AVR - Toolless Post Install Adjustment. SpeakerCraft Terrazza satellite speaker feature a quick connect design that allows for quick, thread-free attachment to the stake. It also offers post installation rotation and tilt and final tightening via an ergonomic thumbscrew. - Handy Hammer Cap. We even include a handy hammer cap that protects the stake from damage when pounding it into the ground. - Easy System Expansion. Expand your system for up to an 8.2 configuration by putting 2 kits together or by adding additional satellites via the SC-TERR- 2.0 SPECIFICATIONS: SUBWOOFER Woofer Size: 8" / 200mm Woofer Construction: Polypropylene Cone SATELLITE SPEAKER Woofer Size: 4" / 100mm Woofer Construction: Polypropylene Cone Tweeter: 3/4" / 20mm Titanium Dome Frequency Response: 38Hz-20kHz Impedance: 8 (Ohms) Nominal Per Channel Power Handling: 30W Min / 150W Max Shipping Info Length: 33.5 (Inches) Width: 17.3 (Inches) Height: 17.5 (Inches) Weight: 37.5 (Lbs) Unit of Measure: Each
