SerialGear 8 Port Serial RS232/422/485 PCIe Adapter Module
The 8-port RS232/422/485 to PCI Express Module Box is designed for your PC workstation thin client or server to provide instant RS232/422/485 Serial port expansion via the PCI Express bus. It supports applications that need some combinations of RS232 RS422 and RS485 in one single PCIe slot. Its architecture defines a high-performance point-to-point scalable serial bus at speed of 250Mbytes/sec to 4GBytes/sec. The MG-58388 is compatible with new and legacy RS232/422/485 devices. It is easy to install and use with its plug-and-play feature. It provides the scalability to quickly adapt to new serial technologies. Complete product line offer many choices help you to expand and make your network grow with your requirements. Features Fully Compliant with x1 PCI Express Base Specifications 1.1 Provides eight 7-pin terminal block connector RS232/422/485 ports Supports LED Indicators for TXD and RXD Signal Activity Parity: None Even Odd Data bits: 5 67 8 9 bits Data Frames Speed: up to 921.6Kbps Terminator: 120 OHM can be Enabled/Disabled by DIP switches ATTATM: Auto RS485 Transmitter buffer direction control by the ATTATM Hardware. Guarantee Fast Turn Around the Transceiver. Power: The Module Box can be powered by Cable or its 2-pin Terminal Block Connector
SerialGear USB RS-232 Industrial Adapter Isolated and Surge Protected FTDI Chip
The USB-SSRS1 USB to serial conversion cable is designed for PC thin clent or server to provide an instant Isolation and Surge Protection COM port expansion via the Universal Serial Bus (USB). The USB-SSRS1 provides the scale-ability to quickly adapt to new USB technologies. Multiple modules can be added to a single USB interface allowing you to add WAN connectivity as needed. Complete product line offer many choices help you to expand and make your network grow with your requirements. With the USB Plug-and-Play feature simply plug in follow the instructions of Install Wizard then you are done. You don't have to deal with Card Slots I/O address IRQ jumpers DMA and others when you are connecting the devices. The System will recognize the device and install the drivers automatically. The USB-SSRS1 is an ideal solution for your expanding applications. Features Supports 1 DB9-Male UART Serial port Supports 3-wire RS-232 signals (TxD RxD GND) Isolation: Built-in 2500Vrms Optical Isolation Circuits Surge Protection: Built-in 500W Bi-direction Surge Protection Circuits Data Bits: 7 8 Stop Bits: 1 2 Parity: None Odd Even Mark Space Baud Rate: 300 bps to 921.6 Kbps Supports Windows 7 8 and Windows 10 Linux and Mac OS 10. X Form Factor: 1.77 in (L) x 1.63 in (W) x 0.86 in (H) ( 4.50 x 4.15 x 2.20 cm)
SerialGear Four Port USB to Quad RS-422/485 Adapter with Optical Isolation & Surge Protection
The optical isolation on this 4 port serial adapter protects your PC from spikes and surges on the RS-422/485 network by converting the electrical pulse into an optical signal and then changing it back into an electrical pulse. The surges and spikes cannot cross the optical link. The adapter is built-in surge protector to withstand electrostatic discharge and power surges up to 25KV ESD. The USB-to-Optical isolated Quad RS-422/485 Adapter provides instant connectivity to RS-422 or RS-485 communication devices for POS factory automation equipment multi-drop data collection devices bar code readers time clocks scales data entry terminals PC to PC long distance communications ATMs and serial data communication in harsh environments. Features: Adds four RS-422 or RS-485 serial ports by connecting to USB port Installed as standard Windows COM port 2000V DC optical isolation protection 25KV ESD surge protection RS-422 data signal: Tx- Tx+ Rx+ Rx- GND RTS- RTS+ CTS+ CTS- RS-485 data signal: 4-wire: Tx- Tx+ Rx+ Rx- 2-wire: data- data+ FIFO: 128 byte transmit buffer 384 byte receive buffer Serial port speed up to 920K bps Four DB9 male connectors Full hardware and software flow control Automatic transmit buffer control for 2-wire RS485 half-duplex operation 2KV DC optical isolation protection ESD surge protection (25KV) Monitor LEDs of Power TxD RxD indicating power & port status
SerialGear Industrial 4-Port RS-232 USB-to-Serial Adapter Compact Metal Case with 1m Octopus Cable DIN rail
USB 2.0 Industrial RS232 Serial Adapter with Breakout Cable and FTDI designed to make serial port expansion very simple this RS232 serial adapter connects to a USB port on your computer or USB hub and instantly adds 4 serial communication ports to your system. Automatically detected and installed the Industrial 4-Port RS-232 USB-to-Serial Adapter serial adapter presents no IRQ & COM port conflicts because it doesn’t require any additional IRQ DMA memory as resources on the system. Features: Adds Four industrial RS-232 serial ports by connecting to a USB port Compact size box can be mounted to DIN rail conveniently Octopus cable fanning out to 4 DB9 serial ports Installed as standard Windows COM port SECC metal chassis with DIN rail bracket Hardware/software flow control RS-232 data signals: TxD RxD RTS CTS DSR DTR DCD GND High speed serial port with the baud rate up to 921.6K bps 128 byte transmit FIFO & 384 byte receive FIFO Non-standard baud rates supported LEDs of Power TxD and RxD for easy port monitoring and diagnostics Serial port protected with surge protection of 10KV Powered by USB port no external power adapter required Easy plug and play installation and RS-232 device connection COM port number assigned can be changed to any COM port number required Works with USB 1.1 & 2.0 host port Supports Windows 8 Windows 7 Vista 2003 XP 2000 and Linux
SerialGear USB to Serial 4-Port DB-9 RS-232 Adapter with FTDI Chipset – Works with Windows 10, 8, 7, XP and Mac OS 10.X Systems
Supports 4 serial ports with data rates from 75 bps to 921.6KbpsMultiple module support through the USB interfaceUSB Port Fully compatible with USB1.0 and USB1.1; Forward compatible with USB 2.0Supports 3-wire RS232 Signals (TXD, RXD, GND)Rigid Metal Case for surface mounting and critical applicationsThe 4 Port Serial DB-9 RS-232 Adapter is designed for PC, thin client, or server to provide 4 instant DB-9 RS-232 COM port expansions from the Universal Serial Bus (USB) host. This 4 port DB-9 RS232 Adapter provides the scalability to quickly adapt to new USB technologies. Multiple modules can be added to a single USB interface allowing you to add 1 to 4 serial RS232 port connections as needed helping your network grow with your requirements. With the USB Plug-and-Play features, you can simply plug in and follow the instructions of Install Wizard, You're ready to use your serial devices once the installation is complete. Going through a configuration with the Serial DB-9 RS-232 Adapter for Card Slots, I/O address, IRQ jumpers, DMA and others when you are connecting the devices is not necessary as the system will recognize the device and install the drivers automatically. Features and Specifications: USB Port Fully compatible with USB1.0 and USB1.1; Forward compatible with USB 2.0 Serial Port Supports 4 DB9-Male UART Serial ports Supports 3-wire RS232 Signals (TXD, RXD, GND) Rigid Metal Case for Critical Applications Four Port Serial RS-232 DB-9 Box USB Converter Baud Rate from 75 bps to 921.6Kbps 512-Byte Deep FIFOs for each Port Supports 5,6,7,8 Data Bits Odd, Even, Mark, Space, or None parity mode Supports 1, 1.5 and 2 Stop Bits Supports USB Bus Power DC Jack for Optional DC 5V Power Input OS Support: Windows XP, Vista, Windows 7, Windows 8, and Windows 10, Linux and Mac OS 10.X Form Factor: 6.83in(L) x 3.83in(W) x 0.96in(H) (17.35 x 9.72 x 2.43 cm)
