close

Buy Rig Expert Products online in United States

Sort by
RigExpert Stick 230 Pocket Size Antenna Analyzer for 100kHz - 230MHz
Small. Handy. Powerful. The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. The following tasks are easily accomplished by using this analyzer: Rapid check-out of an antenna in the field or stationary conditions. Tuning an antenna to resonance. Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.). Measuring capacitance or inductance of reactive loads. Frequency range: 0.1 to 230 MHz Frequency entry: 1 KHz resolution Measurement for 25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes R and X range: 0…10000, -10000…10000 Display modes: SWR, return loss, R, X, Z, L, C, Magnitude and Phase Angle at single frequency. SWR chart, 100 points. SWR chart at fixed HAM bands by IARU Regions, 100 points. Multé mode – to check your multiband antenna promptly. RF output: Connector type: UHF (SO-239). Output signal shape: square, 0.1 to 230 MHz. Output power: -10 dBm (at 50 Ohm load). Power: One 3.7V Li-Ion battery, type 18650 When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources Interface: 200×200 monochrome e-paper display 2×3 keys on the water-proof keypad English menus and help screens USB connection to a personal computer
Rig Expert
RigExpert AA-35 ZOOM HF Antenna Analyzer (60kHz - 35MHz)
The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability. The following tasks are easily accomplished by using this analyzer: Rapid check-out of an antenna Tuning an antenna to resonance Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc. ) Making coaxial stubs or measuring their parameters Cable testing and fault location, measuring cable loss and characteristic impedance Measuring capacitance or inductance of reactive loads
Rig Expert
RigExpert AA-30.ZERO – DIY HF Antenna Analyzer (0.06 TO 30 MHZ)
It is a standard AA-30 analyzer but without enclosure, LCD display and keypad. Frequency range: 0.06 to 30 MHz SWR measurement range: 1 to 100 in numerical mode Dimensions (W x H x D) 55 mm x 69 mm x 5 mm (PCB only w/o connectors) ( 2.1 in x 2.7 in x 0.2 in) Weight 310 g ( 10.9 Oz) w/o connectors It is a standard AA-30 analyzer but without enclosure, LCD display and keypad. But. ZERO is even more powerful than the old good AA-30. Why is that? Creating the AA-30. ZERO we met the numerous wishes of radio amateurs and DIY-hobbyists to give them a measuring tool that can be easily integrated into their own projects. Are. ZERO ready for use? Yes, it has everything necessary on board, so the user can connect. ZERO to the PC (through USB-to-RS232 adaptor) and perform all the usual set of laboratory measurements.. ZERO perfectly works with our AntScope software. Want to DIY? Experienced user can pair. ZERO with the Arduino board making his own hardware/software project. Because. ZERO is compatible with Arduino standard. Also we have already prepared examples of running. ZERO in the DIY projects. Want to make your own automatic antenna tuner? Use. ZERO! Want to perform RF-circuits or antenna analysis remotely? Pair. ZERO with the ESP8266 Wi-Fi SoM and do it! Want to tune your antenna with driven elements sharply? Use. ZERO to fine tuning.
Rig Expert
RigExpert AA-55 ZOOM HF/6m Antenna Analyler (60kHz - 55MHz)
The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 55 MHz.A built-in ZOOM capability makes graphical measurements especially effective.The following tasks are easily accomplished by using this analyzer:Rapid check-out of an antennaTuning an antenna to resonanceComparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)Making coaxial stubs or measuring their parametersCable testing and fault location, measuring cable loss and characteristic impedanceMeasuring capacitance or inductance of reactive loads
Rig Expert
Bundle - 3 Items - Includes RigExpert AA-35 ZOOM HF (60kHz - 35MHz) Antenna Analyzer with the New Radiowavz Antenna Tape (2m - 30m) and HAM Guides Quick Reference Card
Bundle - 3 Items - Includes Rig Expert AA-35 ZOOM HF (60kHz - 35MHz) Antenna Analyzer with the New Radiowavz Antenna Tape (2m - 30m) and HAM Guides Quick Reference Card The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible ZOOM capability. The following tasks are easily accomplished by using this analyzer: Rapid check-out of an antenna Tuning an antenna to resonance Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc. ) Making coaxial stubs or measuring their parameters Cable testing and fault location, measuring cable loss and characteristic impedance Measuring capacitance or inductance of reactive loads This patent-pending industrial grade tape measure is pre-marked for dipoles and loop antennas up to 30M. It also includes measurements for 1/4 and 1/2 wave. With a belt clip and no-slip ruggedized exterior, you'll want to make sure you have this tape measure in your shack, your bug out bag, your glove box and your ham buddy's Christmas stocking.
Rig Expert
Bundle - 3 Items - Includes RigExpert AA-1400 Antenna Analyzer 0.1 up to 1400MHz with the New Radiowavz Antenna Tape (2m - 30m) and HAM Guides Quick Reference Card
Bundle - 3 Items - Includes Rig Expert AA-1400 Antenna Analyzer 0.1 up to 1400MHz with the New Radiowavz Antenna Tape (2m - 30m) and HAM Guides Quick Reference Card Rig Expert AA-1400 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines. Graphical SWR (Standing Wave Ratio) and impedance, as well as polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna. Easy-to use measurement modes, as well as additional features such as connection to a personal computer make Rig Expert AA-1400 attractive for professionals and hobbyists. The following tasks are easily accomplished by using these analyzers: Rapid check-out of an antenna Tuning an antenna to resonance Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc. ) Making coaxial lines or measuring their parameters Cable testing and fault location Measuring capacitance or inductance of reactive loads This patent-pending industrial grade tape measure is pre-marked for dipoles and loop antennas up to 30M. It also includes measurements for 1/4? and 1/2?. With a belt clip and no-slip ruggedized exterior, you'll want to make sure you have this tape measure in your shack, your bug out bag, your glove box and your ham buddy's Christmas stocking.
Rig Expert
Back to Top