close

Buy Qingdao Hantek Electronic Coltd Products online in United States

Sort by
Hantek 365F PC USB Digital Data Logger Recorder Multimeter Voltage Current Resistance Measurement
Ideal digital data logger for recording voltage, current, resistance, capacitance, etc. It can generate trend curves in real time and can be connected with PC. Features: Record voltage, current, resistance, capacitance, etc. It can generate trend curves in real time. Safe electrical isolation, true RMS measurement. With USB interface, built-in Li-ion battery, convenient to use. Support iPad, Android phones and wireless transmission via bluetooth. System support: Win7, Win8, WinXP. Specifications: DC Voltage: 60mV / 600mV / 6V / 60V / 600V / 800V Resolution: 10µV / 100µV / 1mV / 10mV / 100mV / 1V AC Voltage: 60mV / 600mV / 6V / 60V / 600V Resolution: 10µV / 100µV / 1mV / 10mV / 100mV DC Current: 60mA / 600mA / 6A / 10A Resolution: 10µA / 100µA / 1mA / 10mA AC Current: 60mA / 600mA / 6A / 10A Resolution: 10µA / 100µA / 1mA / 10mA Resistance: 600O / 6kO / 60kO /600kO / 6MO / 60MO Capacitance: 40nF / 400nF / 4µF / 40µF / 400µF Diode: 0V-2V On-off Test: 10O Power Supply: Built-in Li-ion Battery Item Size: 20.5 * 12 * 3cm / 8.1 * 4.7 * 1.2 in Item Weight: 426g / 15oz Package Size: 23.5 * 17 * 7cm / 9.3 * 6.7 * 2.8 in Package Weight: 729g / 25.7 oz Package List: 1 * Data Logger 1 * USB Cable 2 * Pair of Probes 1 * CD
Qingdao Hantek Electronic Co.,Ltd
hantek ht308 cop extension cord with earth cord ht308 for diagnostic coil-on-plug lead
Features: COP Extension Cord (HT308) Simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug (COP) ignition systems. Contents: 1pc X Coil-on-Plug Extension Cord and 1pc X Earth Cord. Specifications: Hantek COP Extension Cord HT308 With Earth Cord For Diagnostic Coil-on-Plug Leads Coil-on-Plug extension cord with earth cord are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems. Coil-on-Plug extension cords are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there are no, or limited access, to any spark plug leads. Package Including: 1pc X Coil-on-Plug Extension Cord 1pc X Earth Cord
Qingdao Hantek Electronic Co.,Ltd
Hantek DPO6082B Desktop Oscilloscope Digital Storage Oscilloscope 2-Channel 80MHz 1GSa/s Digital Phosphor Oscilloscope
The oscilloscope features of extremely high memory depth, wide dynamic range, clear display, high waveform capture rate and as many as 16 kinds of triggering functions, 5 kinds of serial decoding functions. It is a useful commissioning instrument for various fields such as communication, aerospace, defense, embedded systems, computers, research and education. Features: 1GSa/s real-time sample rate of the digital channels. 80MHz analog channel bandwidth. 2-channel signal source, 13 kinds of waveform inside, 4 sets of arbitrary waveform, 8Kpts waveform length. Segmented acquisition function, support to capture up to 80, 000 sections. Low base noise, 500uV/div to 10V/div ultra-wide vertical dynamic range. 7.0 inch WVGA (800*480) TFT LCD, with ultra-wide screen, vivid picture, low power consumption and long service life. Adjustable waveform brightness and display brightness. Up to 16 kinds of trigger functions, including 5 kinds of protocol triggers. Auto measurement of 42 kinds of waveform parameters (with statistics). 5 bits digital voltage meter and 6 bits hardware frequency indicator function. Bode diagram function (the oscilloscopes with signal source function can use). Compact and delicate industrial design and easy operation. Specifications: Acquisition Acquisition Methods Real-time sample Channel 2 Bandwidth 80MHz Sample Rate 1GSa/s Peak Detection Analog channel 4ns Note: digital channels don & #39; t support Average Mode Analog channel All channels reach N time samples at the same time, N can be selected from 2, 4, 8, 16, 32, 64, 128, 256, 512 and 1024. Note: digital channels don & #39; t support High Resolution Up to 12bit Note: digital channels don & #39; t support Minimum Test Pulse Width 8ns Input Input Coupling DC, AC or GND Note: digital channels don & #39; t support Supported Probe Attenuation Factor Analog channel 1X, 10X, 100X, 1000X Voltage Classes 300V CAT II Maximum Input Voltage Analog channel 300VRMS (10X) Digital Channel -25~25V Horizontal Waveform Interpolation (sin x) /x Time Base Mode Y-T, X-Y, Roll Zero Offset 0.5 div minimum time base gear Sampling Rate and Delay Time Accuracy 25ppm Clock Drifting 5ppm/year Delta Time Measurement Accuracy (Full Bandwidth) Single, acquisition mode (1 sample interval + 100ppm reading + 0.6 ns) 16 times averages (1 sample interval + 100ppm reading + 0.4 ns) Sample interval=sec/div 200 Vertical Bandwidth (-3db) 80MHz Vertical Scale Range Input BNC position is 500µV/div~100V/div
Qingdao Hantek Electronic Co.,Ltd
Professional Certified Hantek DSO4102S Desktop Mixed Signal Oscilloscope(MSO) 2CH Digital Storage Oscilloscope +1 Channel Arbitrary/Function Waveform Generator 100MHz 7" TFT 1GSa/s 25MHZ Signal
2 Channel Digital Oscilloscope. 1 Channel Arbitrary/Function Waveform Generator. The Keys for oscilloscope and waveform generatoris separated for convenient to operate it simultaneously. Oscilloscope: 100MHz Bandwidth, 1GSa/s Sample Rate. 25MHz Arbitrarywaveform generator, 12 bits resolution, 200MHz DDS, 7 inch 64K color LCD display, Resolution 800x480. Features: 2 channel digital oscilloscope + arbitrary/function waveform generator + synchronizing signal + external trigger. The keys for oscilloscope and waveform generator is separated for convenient to operate it simultaneously. Large and clear display (7 inch 64K color LCD display, Resolution 800x480), more clear and realistic waveform. Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth, more than 20 kinds of auto measurement functions. Powerful trigger function: edge, video, pulse, slope, over time, alternative. Arbitrary/function waveform generator: 25MHz, 12 bits resolution, 200MHz DDS, arbitrary wave/square wave/sine wave/trianglewave/trapezoidal wave/pulse wave/DC is easy to simulate transducer. Integrated USB Host, Support USB disk storage, USB interface/SD card system update. Note: Hantek DSO4102S Digital Oscilloscope is for 3 years Warranty! Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product. Specifications: Model DSO4102S Oscilloscope Sample Rate Sampling Rate Range: 1GSa/s Equivalent Sample Rate: 25GSa/s Acquisition Modes Normal Normal data only Peak Detect High-frequency and randon glith capture Average Wavefom Average, selectable 4, 8, 16, 32, 64, 128 Inputs Inputs Coupling AC, DC, GND Inpits Impendance 1MO2% ?20pF3pF Probe Attenuation 1X, 10X Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X Maximum Input Voltage CAT I and CAT II: 300VRMS (10) CAT III: 150VRMS (1); Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. Horizontal Sample Rate Range 1GS/s Waveform Interpolation (sin x) /x Record Length 40K SEC/DIV Range 4ns/div to 40s/div Sample Rate and 50ppm(at over any 1ms time interval) Delay Time Accuracy Position Range 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal mode: (1 sample interval +100ppm reading + 0.6 ns); 16 averages: (1 sample interval + 100ppm reading + 0.4 ns); Sample interval = s/div 200 Vertical Vertical Resolution 8-bit resolution, all channel sampled simultaneously Position Range 2mV/div to 10V/div
Qingdao Hantek Electronic Co.,Ltd
Hantek CC-65 AC/DC Current Clamp Meter 20KHz Bandwidth 20mA to 65A DC with BNC Connector
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. When measuring AC/DC Current with the Current Clamp, a multimeter or scope can directly measure the current up to 65A, with a frequency uo to 20KHz. In this method, there is no need to break a circuit or to affect the isolation to measure the current. Features: AC/DC frequency range: up to 20KHz. Effective measurement range: 20mA to 65A DC. Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. If connect to an oscilloscope by BNC type connector, you & #39; re able to observe the current waveforms. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipment measurement. Specifications: DCA Range 1mV / 10mA ( 1.5 %5mA) 10mA ~ 20A 1mV/100mA (2%20mA) 100mA ~ 40A; (4% 0.3A ) 40A ~ 65A ACA Range 1mV/10mA (2%30mA) 100mA ~ 10A (40Hz ~ 2KHz); (4%30mA) 100mA ~ 10A (2KHz ~ 10KHz); (6%30mA) 100mA ~ 10A (10KHz ~ 20KHz); (8%30mA) 10A ~ 15A (40Hz ~ 20KHz) 1mV/100mA (2%30mA) 200mA ~ 40A (40Hz ~ 1KHz); (4%30mA) 200mA ~ 40A (1KHz ~ 2KHz); (6%30mA) 200mA ~ 40A (2KHz ~ 5KHz); (8% 0.3A ) 40A ~ 65A (40Hz ~ 20KHz) Captured Conductor Size Max. 9mm Low Battery Indicator Red LED Lighting Operating Temperature 0C to 50C, 70% RH Storage Temperature -20C to +70C, 80% RH Battery Type 1 * 9V 6F22 Battery (NOT Included) Output BNC Plug Dimensions 195 * 70 * 33mm / 7.67 * 2.75 * 1.3 in Weight 184g / 6.5 oz Package Size 21.5 * 11 * 5cm / 8.46 * 4.33 * 1.97 in Package Weight 251g / 8.85 oz Package List: 1 * Current Clamp with BNC Plug 1 * User Manual (English)
Qingdao Hantek Electronic Co.,Ltd
Hantek 1832C Handheld LCR Meter LCR High Precision Tester Inductance Capacitance Resistance Tester
The LCR is a portable handheld measuring instrument used to measure inductance, capacitance, resistance and other component parameters. With compact size and powered by 5V lithium batteries, it can be used in desktop applications as well as mobile and handheld measurement applications. Features: General Function: the handheld LCR meter is used for measuring resistance, capacitance, inductance, impedance. Remote Communication Function: the LCR meter can be connected to PC via the type-C USB cable for remote control and data acquisition. Correction Function: open circuit and short circuit correction function can effectively reduce the error of distributed parameters caused by the test line and improve the accuracy of measurement. Measurement Parameters: main parameter includes resistance, capacitance, inductance, and impedance, ), secondary parameter includes reactance, dissipation factor, quality factor, phase angle, and equivalent series resistance. It provides a resolution of four thousands digits for main parameters and a resolution of 0.0001 for secondary parameter. Measurement Frequency: the highest measurement frequency is 100kHz, and can measure the level of 0.6V rms, 0.3V rms. Practical: with simple and intuitive operation, this small size LCR meter combines the convenience of a handheld instrument and good performance of a table-type one. Configuration Menu: practical for setting buzzer, automatic shutdown, language and other operations. Data Recording Function: it records the maximum value, minimum value of the main parameter and the average value of the last ten tests. Specifications: Plug Type: EU / US (Optional) Material: ABS Measurement Parameters: L/C/R/Z (main parameter), X/D/Q/?/ESR (secondary parameter) Equivalent Mode: Series, parallel Mode of Range: Manual, automatic Measurement Speed: Fast(4 times/s), medium(2 times/s), slow(1 times/s) Configuration of the Test Terminal: 3-terminal, 5-terminal Correction Function: Short circuit, open circuit Communication Interface: Type C (virtual serial port) Test Signal Frequency: 100Hz, 120Hz, 400Hz, 1kHz, 4kHz, 10kHz, 40kHz Test Signal Level: 0.6V rms Output Impedance: 100O Highest Accuracy: 0.25 % (resistance), 0.4 % (capacitance) Measurement Range: L: 0~2000H, C: 0~20mF, R: 0~20MO Working Temperature: 0~40? Storage Temperature: 5~40? Relative Humidity: 75%RH Storage Humidity: 85%RH Power Supply: 7.4V lithium battery Item Size: 202 * 98 * 40mm / 7.95 * 3.86 * 1.57 in Item Weight: 571g / 1.2 lb Package Weight: 1065g / 2.35 lb Package Size: 24.8 * 19 * 10.5 cm / 9.76 * 7.48 * 4.13 in Packing List: 1 * LCR Meter 1 * Type-C USB Communication Cable 1 * AC Power Adapter 1 * Short Circuit Plate 2 * Alligator Clip Cable 1 * Pouch
Qingdao Hantek Electronic Co.,Ltd
Hantek HT307 Acupuncture Back Probe Pins Set Automotive Diagnostic Test Accessories Repair Tools
This acupuncture probe is a back pinning, piercing and repairable probe. This set includes 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles. Features: The fine tip can slide past weather pack seals to probe connectors. As acupuncture probes, they are used for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires. They can be used as pin-tip probes while working with small circuit boards. The set of 5 probes also comes with 20 replacement pins, there & #39; s no need to replace the whole probe. Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires. Specifications: Probes Color: Black/Blue/Yellow/Red/Greem Acupuncture Probes: 5pcs Replacement Needles: 20pcs Complete Probe Length (1pc): 65mm / 2.56 in Length of Pin: 37mm / 1.45 in Package Size: 12 * 7.5 cm / 4.72 * 2.95 in (L * W) Package Weight: 23g / 0.81 oz Package List: 5 * Complete Acupuncture Probes 2 * Screws 20 * Replacement Needles
Qingdao Hantek Electronic Co.,Ltd
Hantek DSO4102C Desktop Mixed Signal Oscilloscope(MSO) 2CH Digital Storage Oscilloscope +1 Channel Arbitrary/Function Waveform Generator 100MHz 7
2 Channel Digital Oscilloscope. 1 Channel Arbitrary/Function Waveform Generator. The Keys for oscilloscope and waveform generatoris separated for convenient to operate it simultaneously. Oscilloscope: 100MHz Bandwidth, 1GSa/s Sample Rate. 25MHz Arbitrarywaveform generator, 12 bits resolution, 200MHz DDS, 7 inch 64K color LCD display, Resolution 800x480. Features: 2 channel digital oscilloscope + arbitrary/function waveform generator + synchronizing signal + external trigger. The keys for oscilloscope and waveform generator is separated for convenient to operate it simultaneously. Large and clear display (7 inch 64K color LCD display, Resolution 800x480), more clear and realistic waveform. Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth, more than 20 kinds of auto measurement functions. Powerful trigger function: edge, video, pulse, slope, over time, alternative. Arbitrary/function waveform generator: 25MHz, 12 bits resolution, 200MHz DDS, arbitrary wave/square wave/sine wave/trianglewave/trapezoidal wave/pulse wave/DC is easy to simulate transducer. Integrated USB Host, Support USB disk storage, USB interface/SD card system update. Note: Hantek DSO4102C Digital Oscilloscope is for 3 years Warranty! Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product. Specifications: Model DSO4102C Oscilloscope Sample Rate Sampling Rate Range: 1GSa/s Equivalent Sample Rate: 25GSa/s Acquisition Modes Normal Normal data only Peak Detect High-frequency and randon glith capture Average Wavefom Average, selectable 4, 8, 16, 32, 64, 128 Inputs Inputs Coupling AC, DC, GND Inpits Impendance 1MO2% ?20pF3pF Probe Attenuation 1X, 10X Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X Maximum Input Voltage CAT I and CAT II: 300VRMS (10) CAT III: 150VRMS (1); Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. Horizontal Sample Rate Range 1GS/s Waveform Interpolation (sin x) /x Record Length 40K SEC/DIV Range 4ns/div to 40s/div Sample Rate and 50ppm(at over any 1ms time interval) Delay Time Accuracy Position Range 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal mode: (1 sample interval +100ppm reading + 0.6 ns); 16 averages: (1 sample interval + 100ppm reading + 0.4 ns); Sample interval = s/div 200 Vertical Vertical Resolution 8-bit resolution, all channel sampled simultaneously Position Range 2mV/div to 10V/div
Qingdao Hantek Electronic Co.,Ltd
Hantek Max.2.5KV DC X100 120MHz 100MO Oscilloscope Clip Passive High Voltage Probe
The T3100 probe is designed as a strong, flexible and reliable part for the oscilloscope according to the human body function. It is compatible with all the digital oscilloscope and the analog oscilloscope with detailed frequency internationally. Features: High quality and reliable. Usable with oscilloscopes having bandwidth up to 120 MHz. Perfect for engine diagnosis. High working input voltage of 2.5KV DC + Peak AC. Professional high voltage probe for oscilloscope. Specifications: Color: Black + Grey Attenuation: 1: 100 Input Resistance: 100MO Input Capacitance: X 100: 14. 5pF ~ 17.5 pF Compensation Range: 15pF ~ 35pF System Bandwidth: DC 120MHz Maximum Working Input Voltage: X 100: 2. 5KVDC+Peak AC Operating Temperature: -10? ~ +50? / 14? ~ 122? Non Operating Temperature:-20? ~ +75? / -4? ~ 167? Humidity: 85% (Relative Humidity) Cable Length: 120cm / 47.2 in Item Size: Approx. 18 * 3 * 2cm / 7.1 * 1.2 * 0.8 in (ONLY Probe) Item Weight: Approx. 61.8 g / 2.2 oz Package Size: Approx. 25.5 * 15.6 * 2.5 cm / 10.0 * 6.1 * 1.0 in Package Weight: Approx. 94.4 g / 3.3 oz Package List: 1 * High Voltage Probe 1 * Adjustment Tool 1 * Tip Locating Sleeve 1 * Instruction
Qingdao Hantek Electronic Co.,Ltd
Hantek CC-650 AC/DC Current Clamp Meter 400Hz Bandwidth 20mA to 650A DC with BNC Connector
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. When measuring AC/DC Current with the Current Clamp, a multimeter or scope can directly measure the current up to 650A, with a frequency uo to 400Hz. In this method, there is no need to break a circuit or to affect the isolation to measure the current. Features: AC/DC frequency range: up to 400Hz. Effective measurement range: 20mA to 650A DC. Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. If connect to an oscilloscope by BNC type connector, you & #39; re able to observe the current waveforms. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipment measurement. Specifications: Efficient Measure Range: 1mV/100mA: 100mA to 20A, Multimeter Range is set to DC or rms AC 200mV 1mV/1A: 1A to 200A, Multimeter Range is set to DC or rms AC 200mV; 200A to 650A, DC or rms AC 2V DC Current Accuracy: 0 to 650A, +/- (3% reading + 2A ) AC Current Accuracy: 50Hz arrive at 400Hz Captured Conductor Size: Max. 30mm Low Battery Indicator: Red LED Lighting Operating Temperature: 0C to 50C 70% RH Storage Temperature: -20C to +70C, 80% RH Battery Type: 1 * 9V 6F22 Battery (NOT Included) Output: BNC Plug Dimensions: 175 * 70 * 33mm / 6.9 * 2.75 * 1.3 in Weight: 235g / 8.31 oz Package Size: 21.5 * 11 * 5cm / 8.46 * 4.33 * 1.97 in Package Weight: 303g / 10.71 oz Package List: 1 * Current Clamp with BNC Plug 1 * User Manual (English)
Qingdao Hantek Electronic Co.,Ltd
DSO2D15 800 * 480 Pixel 7 Inch TFT LCD Screen 2CH+1CH Channels 150MHz Band Width 1GSa/s Sampling Rate Oscilloscope Multipurpose Tool
DSO2D15 7 Inch TFT LCD screen oscilloscope is fine quality and low price, with the characteristics of 150MHz band width and 1GSa/s sampling rate, built-in 25MHz signal generator, support any type wa-veoutput, with 14 types of trigger mode, There are five kinds of serial protocol triggering and decoding, 32 kinds of automatic measurement, with the function of statistical analysis of test results, with a wealth of SCPI remote control instructions. It is wildly used in communication, aerospace, national defense, embedded systems, computers, research and education and a lot of other industries and fields. Come on and try Features: Has 2 channels, and each channel with independent knob control. 150 MHz ana-log bandwidth and 1GSa/s sampling rate. It has a 7-inch TFT LCD screen, 800 * 480 pixels, 16 million display colors (24bit true colors). Built-in a 25MHz signal generator, support arbitrary wa-veburst output, support modulation wa-veform output. It can save settings, wa-veforms, reference wa-veforms, CSV, pictures and other data formats, with 5-digit digital voltmeter and 6-digit hardware frequency counter functions. Support 32 kinds of automatic measurement and statistics functions, real-time statistics of minimum, maximum, standard deviation and other statistical information. It has two sets of digital voltmeter functions, supports threshold testing, and can realize free measurement on the screen. With abundant SCPI remote control commands, it can provide a lot of types of peripheral interfaces, such as USB Host/Device. It can save 10 sets of reference wa-veforms, CSV wa-veforms, settings and USB one-key screenshot function. Serial bus triggering and decoding function, providing protocol monitoring function. 8M storage depth reduces wa-veform distortion and restores real wa-veforms. XY mode supports dual window display. Specifications: Material: ABS Color: balck Band width: 150MHz Number of channels: 2 channels Built-in signal source: 1 channel Sampling rate range: 1GSa/s(singal channel), 500MSa/s (dual channel) Pe-ak-to-pe-ak value: Displays high frequency and random burrs Average value: average wa-vetime: 4, 8, 16, 32, 64, 128 Highest precision: 12bit Input coupling: DC, AC, GND Input impedance: 1MO2% ?20pF3pF Probe attenuation coefficient setting: 1X, 10X, 100X, 1000X Voltage level: 300V CA-T II Maximum input voltage: 300VRMS (10X) wa-veinterpolation: (sin x) /x Maximum record length: 8M(singal channel), 4M (dual channel) Horizontal scale range: 2ns/div~100s/div 1, 2, 5 step Time base mode: Y-T?X-Y?Roll Null offset: 0.5 divminimum base position Sampling rate and delay time accuracy: 25ppm Time of ascent at BNC (typical): 2.3 ns Vertical resolution: 8 bit (each channel is sampled simultaneously) Vertical sensitivity: 2mV/div to 10V/div Bass response: 10Hz (at BNC) Vertical gain accuracy: (In sampling or average sampling mode) Accuracy from 10V/ lattice to 10mV/ lattice is 3% Accuracy from 5mV/ lattice to 2mV/ lattice is 4% Direct current migration accuracy: 0.1 div2 mV1% deviant Trigger type: e-dge, pulse, video, slope, timeout, window, code type, interval, runt, UART, LIN, CAN, SPI, IIC. Trigger mode: Single, Normal, Auto Range of relief: 8ns~10s E-dge trigging: Slope: rising e-dge, falling e-dge, rising e-dge or falling e-dge Information source: CH1?CH2?EXT Pulse trigging: Polarity: Positive polarity, negative polarity When:,,! =, = Information source: CH1~CH2 Pulse width range: 8ns ~ 10s Accurancy: 8ns Window trigging: Information source: CH1~CH2 Code type trigging: Code type: 0: low electrical level, 1: high level, X: ignore,: rise,: drop,: Rise or fall Information source: CH1~CH2 interval trigging: Slope: rise, dowm When: ,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accurancy: 8ns Runt trigging: Polarity: Positive polarity, negative polarity When: ,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accurancy: 8ns UART trigging: When: open, stop, data, parity, receive error Information source(RX/TX): CH1~C
Qingdao Hantek Electronic Co.,Ltd
Hantek HT307 Acupuncture Back Probe Pins Set Automotive Diagnostic Test Accessories Repair Tools
This acupuncture probe is a back pinning, piercing and repairable probe. This set includes 5pcs complete acupuncture probes, 2pcs screws, and 20pcs replacement needles. Features: The fine tip can slide past weather pack seals to probe connectors. As acupuncture probes, they are used for piercing the insulation of wires to allow for automotive electrical measurements without causing damage to the wires. They can be used as pin-tip probes while working with small circuit boards. The set of 5 probes also comes with 20 replacement pins, there & #39; s no need to replace the whole probe. Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires. Specifications: Probes Color: Black/Blue/Yellow/Red/Greem Acupuncture Probes: 5pcs Replacement Needles: 20pcs Complete Probe Length (1pc): 65mm / 2.56 in Length of Pin: 37mm / 1.45 in Package Size: 12 * 7.5 cm / 4.72 * 2.95 in (L * W) Package Weight: 23g / 0.81 oz Package List: 5 * Complete Acupuncture Probes 2 * Screws 20 * Replacement Needles
Qingdao Hantek Electronic Co.,Ltd
DSO2D15 800 * 480 Pixel 7 Inch TFT LCD Screen 2CH+1CH Channels 150MHz Band Width 1GSa/s Sampling Rate Oscilloscope Multipurpose Tool
DSO2D15 7 Inch TFT LCD screen oscilloscope is fine quality and low price, with the characteristics of 150MHz band width and 1GSa/s sampling rate, built-in 25MHz signal generator, support any type wa-veoutput, with 14 types of trigger mode, There are five kinds of serial protocol triggering and decoding, 32 kinds of automatic measurement, with the function of statistical analysis of test results, with a wealth of SCPI remote control instructions. It is wildly used in communication, aerospace, national defense, embedded systems, computers, research and education and a lot of other industries and fields. Come on and try Features: Has 2 channels, and each channel with independent knob control. 150 MHz ana-log bandwidth and 1GSa/s sampling rate. It has a 7-inch TFT LCD screen, 800 * 480 pixels, 16 million display colors (24bit true colors). Built-in a 25MHz signal generator, support arbitrary wa-veburst output, support modulation wa-veform output. It can save settings, wa-veforms, reference wa-veforms, CSV, pictures and other data formats, with 5-digit digital voltmeter and 6-digit hardware frequency counter functions. Support 32 kinds of automatic measurement and statistics functions, real-time statistics of minimum, maximum, standard deviation and other statistical information. It has two sets of digital voltmeter functions, supports threshold testing, and can realize free measurement on the screen. With abundant SCPI remote control commands, it can provide a lot of types of peripheral interfaces, such as USB Host/Device. It can save 10 sets of reference wa-veforms, CSV wa-veforms, settings and USB one-key screenshot function. Serial bus triggering and decoding function, providing protocol monitoring function. 8M storage depth reduces wa-veform distortion and restores real wa-veforms. XY mode supports dual window display. Specifications: Material: ABS Color: balck Band width: 150MHz Number of channels: 2 channels Built-in signal source: 1 channel Sampling rate range: 1GSa/s(singal channel), 500MSa/s (dual channel) Pe-ak-to-pe-ak value: Displays high frequency and random burrs Average value: average wa-vetime: 4, 8, 16, 32, 64, 128 Highest precision: 12bit Input coupling: DC, AC, GND Input impedance: 1MO2% ?20pF3pF Probe attenuation coefficient setting: 1X, 10X, 100X, 1000X Voltage level: 300V CA-T II Maximum input voltage: 300VRMS (10X) wa-veinterpolation: (sin x) /x Maximum record length: 8M(singal channel), 4M (dual channel) Horizontal scale range: 2ns/div~100s/div 1, 2, 5 step Time base mode: Y-T?X-Y?Roll Null offset: 0.5 divminimum base position Sampling rate and delay time accuracy: 25ppm Time of ascent at BNC (typical): 2.3 ns Vertical resolution: 8 bit (each channel is sampled simultaneously) Vertical sensitivity: 2mV/div to 10V/div Bass response: 10Hz (at BNC) Vertical gain accuracy: (In sampling or average sampling mode) Accuracy from 10V/ lattice to 10mV/ lattice is 3% Accuracy from 5mV/ lattice to 2mV/ lattice is 4% Direct current migration accuracy: 0.1 div2 mV1% deviant Trigger type: e-dge, pulse, video, slope, timeout, window, code type, interval, runt, UART, LIN, CAN, SPI, IIC. Trigger mode: Single, Normal, Auto Range of relief: 8ns~10s E-dge trigging: Slope: rising e-dge, falling e-dge, rising e-dge or falling e-dge Information source: CH1?CH2?EXT Pulse trigging: Polarity: Positive polarity, negative polarity When:,,! =, = Information source: CH1~CH2 Pulse width range: 8ns ~ 10s Accurancy: 8ns Window trigging: Information source: CH1~CH2 Code type trigging: Code type: 0: low electrical level, 1: high level, X: ignore,: rise,: drop,: Rise or fall Information source: CH1~CH2 interval trigging: Slope: rise, dowm When: ,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accurancy: 8ns Runt trigging: Polarity: Positive polarity, negative polarity When: ,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accurancy: 8ns UART trigging: When: open, stop, data, parity, receive error Information source(RX/TX): CH1~C
Qingdao Hantek Electronic Co.,Ltd
Hantek DSO2D15 Digital Oscilloscope Meter Desktop Oscillograph Oscillometer 800 * 480 Pixel 7 Inch TFT LCD Screen 2CH+1CH Channels 150MHz Band Width 1GSa/s Sampling Rate Oscilloscope Multipurpose Tool
DSO2D15 7 Inch TFT LCD screen oscilloscope is fine quality and low price, with the characteristics of 150MHz band width and 1GSa/s sampling rate, built-in 25MHz signal generator, support any type wa-veoutput, with 14 types of trigger mode, There are five kinds of serial protocol triggering and decoding, 32 kinds of automatic measurement, with the function of statistical analysis of test results, with a wealth of SCPI remote control instructions. It is wildly used in communication, aerospace, national defense, embedded systems, computers, research and education and a lot of other industries and fields. Come on and try Features: Has 2 channels, and each channel with independent knob control. 150 MHz ana-log bandwidth and 1GSa/s sampling rate. It has a 7-inch TFT LCD screen, 800 * 480 pixels, 16 million display colors (24bit true colors). Built-in a 25MHz signal generator, support arbitrary wa-veburst output, support modulation wa-veform output. It can save settings, wa-veforms, reference wa-veforms, CSV, pictures and other data formats, with 5-digit digital voltmeter and 6-digit hardware frequency counter functions. Support 32 kinds of automatic measurement and statistics functions, real-time statistics of minimum, maximum, standard deviation and other statistical information. It has two sets of digital voltmeter functions, supports threshold testing, and can realize free measurement on the screen. With abundant SCPI remote control commands, it can provide a lot of types of peripheral interfaces, such as USB Host/Device. It can save 10 sets of reference wa-veforms, CSV wa-veforms, settings and USB one-key screenshot function. Serial bus triggering and decoding function, providing protocol monitoring function. 8M storage depth reduces wa-veform distortion and restores real wa-veforms. XY mode supports dual window display. Specifications: Material: ABS Color: black Band width: 150MHz Number of channels: 2 channels Built-in signal source: 1 channel Sampling rate range: 1GSa/s (signal channel), 500MSa/s (dual channel) Pe-ak-to-pe-ak value: Displays high frequency and random burrs Average value: average wa-vetime: 4, 8, 16, 32, 64, 128 Highest precision: 12bit Input coupling: DC, AC, GND Input impedance: 1MO2% ?20pF3pF Probe attenuation coefficient setting: 1X, 10X, 100X, 1000X Voltage level: 300V CA-T II Maximum input voltage: 300VRMS (10X) wa-veinterpolation: (sin x) /x Maximum record length: 8M (signal channel), 4M (dual channel) Horizontal scale range: 2ns/div~100s/div 1, 2, 5 step Time base mode: Y-T?X-Y?Roll Null offset: 0.5 divminimum base position Sampling rate and delay time accuracy: 25ppm Time of ascent at BNC (typical): 2.3 ns Vertical resolution: 8 bit (each channel is sampled simultaneously) Vertical sensitivity: 2mV/div to 10V/div Bass response: 10Hz (at BNC) Vertical gain accuracy: (In sampling or average sampling mode) Accuracy from 10V/ lattice to 10mV/ lattice is 3% Accuracy from 5mV/ lattice to 2mV/ lattice is 4% Direct current migration accuracy: 0.1 div2 mV1% deviant Trigger type: e-dge, pulse, video, slope, timeout, window, code type, interval, runt, UART, LIN, CAN, SPI, IIC. Trigger mode: Single, Normal, Auto Range of relief: 8ns~10s E-dge trigging: Slope: rising e-dge, falling e-dge, rising e-dge or falling e-dge Information source: CH1?CH2?EXT Pulse trigging: Polarity: Positive polarity, negative polarity When:,,! =, = Information source: CH1~CH2 Pulse width range: 8ns ~ 10s Accuracy: 8ns Window trigging: Information source: CH1~CH2 Code type trigging: Code type: 0: low electrical level, 1: high level, X: ignore,: rise,: drop,: Rise or fall Information source: CH1~CH2 interval trigging: Slope: rise, down When:,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accuracy: 8ns Runt trigging: Polarity: Positive polarity, negative polarity When:,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accuracy: 8ns UART trigging: When: open, stop, data, parity, receive error Information source(RX/TX): CH1~C
Qingdao Hantek Electronic Co.,Ltd
Hantek 1008C/1008A 8 Channels Automotive Diagnosis Equipment Car Diagnostic Oscilloscope Automobile Diagnostic Programmable Signal Generator Automobile Special Oscilloscope 8CH 2.4MSa/s 100kHz
Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/StartupCharge), USB 2.0 interface plug and play, and need no extra power supply, Support tablet PC, Support WIN10/ WIN8/WIN7 etc. Free software upgrading constantly, higher cost performance, Support USBXI, easy to operate. 8 isolated channels oscilloscope, 2.4MS a/s real time sampling rate, 10mV/div to 5V/div high input sensitivity and large input range, 100kHz high bandwidth, small size, easy to carry. Dynamic cursor tracking, waveform record and replay Features: 8 channels automotive diagnosis oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus Detection/Actuator/Start and Charge, etc). Video help function provides the video help of automobile testing which can watch online. The diagnostic results support the generation of diagnostic reports, printing with one click, screenshots and many other methods to save the data. Support waveform recording, can be long time recording waveform. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply. Specifications: Brand: Hantek Model: 1008C / 1008A (Optional) Function Difference: Test the Car Engine Ignition (1008C) / NO (1008A) Analog Channel: 8 Bandwidth: 100kHz Input Impedance: Resistance: 1MO Input Sensitivity: 10mV/div to 5V/div Input Coupling: DC Resolution: 12 bits Memory Depth: 4K Max Input: 400V (DC+AC Peak) Sampling Rate: 2.4MS a/s Material: Plastic Item Size: Approx. 225 * 185 * 45mm / 8.9 * 7.3 * 1.8 in Item Weight: Approx. 623g / 22.0 oz Package Size: Approx. 27.5 * 23.5 * 10cm / 10.8 * 9.3 * 3.9 in Package Weight: Approx. 1498g / 52.8 oz (1008A), Approx. 1660g / 58.5 oz (1008C) General Oscilloscope Model Hantek1008C / Hantek1008A (Optional) Analog Channel 8 Input Impedance Resistance: 1MO Input Sensitivity 10mV/div to 5V/div Input Coupling DC Resolution 12 bits Memory Depth 4K Max. Input 400V (DC+AC Peak) Real-Time Sampling Rate 2.4MS a/s TimeBase Range 1ns/div to 20000s/div(1-2-5sequences) Automotive Measurement Function Intake manifold vacuum ignition, Petrol fumes adjusting valve vacuum ignition, Idle exhaust ignition, Starting exhaust ignition; Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position; CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus; Performer: Petrol/Diesel; Starter and charging circuits Time Base Precision 50ppm Trigger Source CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 Trigger Mode Edge X-Axis Input CH1 Y-Axis Input CH2 Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle Cursors Measurement Horizontal, Vertical, Track, Auto Measure Modes Waveform Signa
Qingdao Hantek Electronic Co.,Ltd
Hantek DSO2D15 Digital Oscilloscope Meter Desktop Oscillograph Oscillometer 800 * 480 Pixel 7 Inch TFT LCD Screen 2CH+1CH Channels 150MHz Band Width 1GSa/s Sampling Rate Oscilloscope Multipurpose Tool
DSO2D15 7 Inch TFT LCD screen oscilloscope is fine quality and low price, with the characteristics of 150MHz band width and 1GSa/s sampling rate, built-in 25MHz signal generator, support any type wa-veoutput, with 14 types of trigger mode, There are five kinds of serial protocol triggering and decoding, 32 kinds of automatic measurement, with the function of statistical analysis of test results, with a wealth of SCPI remote control instructions. It is wildly used in communication, aerospace, national defense, embedded systems, computers, research and education and a lot of other industries and fields. Come on and try Features: Has 2 channels, and each channel with independent knob control. 150 MHz ana-log bandwidth and 1GSa/s sampling rate. It has a 7-inch TFT LCD screen, 800 * 480 pixels, 16 million display colors (24bit true colors). Built-in a 25MHz signal generator, support arbitrary wa-veburst output, support modulation wa-veform output. It can save settings, wa-veforms, reference wa-veforms, CSV, pictures and other data formats, with 5-digit digital voltmeter and 6-digit hardware frequency counter functions. Support 32 kinds of automatic measurement and statistics functions, real-time statistics of minimum, maximum, standard deviation and other statistical information. It has two sets of digital voltmeter functions, supports threshold testing, and can realize free measurement on the screen. With abundant SCPI remote control commands, it can provide a lot of types of peripheral interfaces, such as USB Host/Device. It can save 10 sets of reference wa-veforms, CSV wa-veforms, settings and USB one-key screenshot function. Serial bus triggering and decoding function, providing protocol monitoring function. 8M storage depth reduces wa-veform distortion and restores real wa-veforms. XY mode supports dual window display. Specifications: Material: ABS Color: black Band width: 150MHz Number of channels: 2 channels Built-in signal source: 1 channel Sampling rate range: 1GSa/s (signal channel), 500MSa/s (dual channel) Pe-ak-to-pe-ak value: Displays high frequency and random burrs Average value: average wa-vetime: 4, 8, 16, 32, 64, 128 Highest precision: 12bit Input coupling: DC, AC, GND Input impedance: 1MO2% ?20pF3pF Probe attenuation coefficient setting: 1X, 10X, 100X, 1000X Voltage level: 300V CA-T II Maximum input voltage: 300VRMS (10X) wa-veinterpolation: (sin x) /x Maximum record length: 8M (signal channel), 4M (dual channel) Horizontal scale range: 2ns/div~100s/div 1, 2, 5 step Time base mode: Y-T?X-Y?Roll Null offset: 0.5 divminimum base position Sampling rate and delay time accuracy: 25ppm Time of ascent at BNC (typical): 2.3 ns Vertical resolution: 8 bit (each channel is sampled simultaneously) Vertical sensitivity: 2mV/div to 10V/div Bass response: 10Hz (at BNC) Vertical gain accuracy: (In sampling or average sampling mode) Accuracy from 10V/ lattice to 10mV/ lattice is 3% Accuracy from 5mV/ lattice to 2mV/ lattice is 4% Direct current migration accuracy: 0.1 div2 mV1% deviant Trigger type: e-dge, pulse, video, slope, timeout, window, code type, interval, runt, UART, LIN, CAN, SPI, IIC. Trigger mode: Single, Normal, Auto Range of relief: 8ns~10s E-dge trigging: Slope: rising e-dge, falling e-dge, rising e-dge or falling e-dge Information source: CH1?CH2?EXT Pulse trigging: Polarity: Positive polarity, negative polarity When:,,! =, = Information source: CH1~CH2 Pulse width range: 8ns ~ 10s Accuracy: 8ns Window trigging: Information source: CH1~CH2 Code type trigging: Code type: 0: low electrical level, 1: high level, X: ignore,: rise,: drop,: Rise or fall Information source: CH1~CH2 interval trigging: Slope: rise, down When:,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accuracy: 8ns Runt trigging: Polarity: Positive polarity, negative polarity When: ,,! =, = Information source: CH1~CH2 Time: 8ns ~ 10s Accuracy: 8ns UART trigging: When: open, stop, data, parity, receive error Information source(RX/TX): CH1~CH2
Qingdao Hantek Electronic Co.,Ltd
Hantek 1832C Handheld LCR Meter LCR High Precision Tester Inductance Capacitance Resistance Tester
The LCR is a portable handheld measuring instrument used to measure inductance, capacitance, resistance and other component parameters. With compact size and powered by 5V lithium batteries, it can be used in desktop applications as well as mobile and handheld measurement applications. Features: General Function: the handheld LCR meter is used for measuring resistance, capacitance, inductance, impedance. Remote Communication Function: the LCR meter can be connected to PC via the type-C USB cable for remote control and data acquisition. Correction Function: open circuit and short circuit correction function can effectively reduce the error of distributed parameters caused by the test line and improve the accuracy of measurement. Measurement Parameters: main parameter includes resistance, capacitance, inductance, and impedance, ), secondary parameter includes reactance, dissipation factor, quality factor, phase angle, and equivalent series resistance. It provides a resolution of four thousands digits for main parameters and a resolution of 0.0001 for secondary parameter. Measurement Frequency: the highest measurement frequency is 100kHz, and can measure the level of 0.6V rms, 0.3V rms. Practical: with simple and intuitive operation, this small size LCR meter combines the convenience of a handheld instrument and good performance of a table-type one. Configuration Menu: practical for setting buzzer, automatic shutdown, language and other operations. Data Recording Function: it records the maximum value, minimum value of the main parameter and the average value of the last ten tests. Specifications: Plug Type: EU / US (Optional) Material: ABS Measurement Parameters: L/C/R/Z (main parameter), X/D/Q/?/ESR (secondary parameter) Equivalent Mode: Series, parallel Mode of Range: Manual, automatic Measurement Speed: Fast(4 times/s), medium(2 times/s), slow(1 times/s) Configuration of the Test Terminal: 3-terminal, 5-terminal Correction Function: Short circuit, open circuit Communication Interface: Type C (virtual serial port) Test Signal Frequency: 100Hz, 120Hz, 400Hz, 1kHz, 4kHz, 10kHz, 40kHz Test Signal Level: 0.6V rms Output Impedance: 100O Highest Accuracy: 0.25 % (resistance), 0.4 % (capacitance) Measurement Range: L: 0~2000H, C: 0~20mF, R: 0~20MO Working Temperature: 0~40? Storage Temperature: 5~40? Relative Humidity: 75%RH Storage Humidity: 85%RH Power Supply: 7.4V lithium battery Item Size: 202 * 98 * 40mm / 7.95 * 3.86 * 1.57 in Item Weight: 571g / 1.2 lb Package Weight: 1065g / 2.35 lb Package Size: 24.8 * 19 * 10.5 cm / 9.76 * 7.48 * 4.13 in Packing List: 1 * LCR Meter 1 * Type-C USB Communication Cable 1 * AC Power Adapter 1 * Short Circuit Plate 2 * Alligator Clip Cable 1 * Pouch
Qingdao Hantek Electronic Co.,Ltd
Back to Top