Buy Proto Pasta Products online in United States

Proto-pasta FEP11720 Composite Iron PLA, 1.75mm 2kg

Style: 1.75 mm andnbsp; |andnbsp; Color: Iron andnbsp; |andnbsp; Size: 2kg Proto-pasta magnetic iron PLA responds to magnets and behaves similarly to Pure iron, even to the point of rusting in the right environment! magnets “stick” to this Material like they would to iron or steel; it is not a magnet itself and will not “stick” to other metal. Magnetic iron prints beautifully with a matte Gray finish similar to cast metal. The density is about 50 percent higher than standard PLA giving printed parts a bit more “heft” and a less plastic feel. in filament form, fepla is slightly more brittle than standard PLA and requires extra care when handling. Processing is Comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles and/or Bowden Type machines. We frequently print using direct-drive systems with 0. 4mm nozzles, though suggest 0. 6mm and 190-210c (standard PLA or a bit cooler) for the best experience. This filament is more abrasive than standard PLA. Be prepared to replace your nozzle and do 1st layer adjustment. Try a wear resistant and/or larger diameter nozzle for increased service intervals. Contact Proto-pasta for more information.

Proto-pasta CDP11705 Composite Conductive PLA, 1.75 mm 500 g, Black

Brand: Proto-Pasta Color: Black Features: High electrical conductivity of 15ohm-cm suitable for lighting LEDs, touch sensors and other electronics. Comes on fully corrugated recyclable spool with standard dimension Dark Black in color with good printing on PLA machines Processing is comparable to standard PLA. No heated bed required, but it may improve results. Process may be less consistent on smaller nozzles (

Protopasta High Temperature Polycarbonate-ABS Alloy - 1.75mm, 500g, Black

Key Features: High performance material for high performance hardware. Heated bed and all-metal hotend recommended! Polycarbonate-abs alloy is a strong, resilient material that is easier to print than just polycarbonate but with the added benefits Printed parts are tough, lightweight, and have excellent impact resistance. Use with good ventilation Protopasta Polycarbonate-ABS Alloy is an incredibly tough material designed for strong, resilient parts. Properties are excellent and greatly improved over standard ABS. Item Specifics Color: Black Filament Size: 1.75 mm Weight: 500g Nozzle Set-point: 270-290C Bed Temperature: 110-140degC

Protopasta Translucent HTPLA - 1.75mm, 500g, Silver Smoke

Key Features: A one-of-a-kind gunsmoke gray PLA filament with a translucent base No abrasive fillers so you can expect normal wear with standard nozzles. Good results are achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required. Prints are heat treatable and finish with a transparent gray reminiscent of tinted windows in a car or the lenses of a pair of sunglasses. Protopasta & apos; s HTPLA v 2.0 is better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is "Hella Tough" and can be "Heat Treated" for "Higher Temperature" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained. This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C. Item Specifics Color: Silver Smoke Filament Size: 1.75 mm Weight: 500g

Protopasta Translucent HTPLA - 1.75mm, 500g, Iridescent Ice Clear

Key Features: A one-of-a-kind iridescent ice PLA filament with a translucent base No abrasive fillers so you can expect normal wear with standard nozzles. Good results are achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required. Prints are heat treatable and finish with a transparent gray reminiscent of tinted windows in a car or the lenses of a pair of sunglasses. Protopasta & apos; s HTPLA v 2.0 is better than the original kickstarted version. This new formulation is higher performing and lower cost. HTPLA prints similar to standard PLA but is "Hella Tough" and can be "Heat Treated" for "Higher Temperature" resistance. This durable PLA has a theoretical Heat Deflection Temperature (HDT) of more than 140C (285F) after heat treating though in our experience 120C or more was practically attained. This means HTPLA parts maintain strength and form to much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C. Item Specifics Color: Iridescent Ice Filament Size: 1.75 mm Weight: 500g